Synchronize role between two portals

Hello,
we want to synchronize up to two roles including content from one portal to antother portal autmaticly.
Have someone a solution or an workaround to implent this?
The role an content will be modified only in one portal.
Both Portals are NW04 SP13.
Best regards
Christian

Hi Christian,
First of all, Federated Portal Network (FPN) is not available in NW04.
Secondly, it would not help you to synchronize between roles, but only to share content between servers.
If you want to combine 2 roles, you can use the merge id property on them and then their children will be presented under one root role.
But if you want to also revise the content and structure of those roles, you should do it manually.
Best,
Yael

Similar Messages

  • Best approach to synchronize data between two oracle database remotely

    Hi All,
    We have requirement to synchronize data between custom application database and EBS database. Thw two database is on different location connected by 128 kbps connection.
    The synchronization will do the following task :
    - Download customer table from EBS (I have checked there are only 2000 rows of it)
    - Up load billing data to EBS auto invoice interface table
    The question is :
    What approach is the best way to do this synchronization task ? some that come into my mind :
    - create database link and run stored procedure to do the batch update ?
    - for Customer synchronization, is it a good idea to create Materialized view so that any update to EBS customer data will be updated, refreshed nightly
    - or is ther any better approach ?
    Thank you very much,
    xtanto
    Edited by: xtanto on Oct 18, 2008 3:30 PM

    Maybe try Streams?

  • Migrate one application role between two systems (keeping guid)

    Hi
    I know there are ways to migrate the whole policy-store from one environment to another. On the other hand there is a tool to create application roles via command line.
    I have only a set of application roles which I want to move to another environment. The guid should stay identical so that the application roles get automatically applied on the copied catalog.
    Does anybody know if that is also possible? I need to keep the guid but don't want to migrate the whole policy store.
    Thank you

    user12068228 wrote:
    Hi
    I know there are ways to migrate the whole policy-store from one environment to another. On the other hand there is a tool to create application roles via command line.Yes, you can create application roles via WLST. Below are the commands:
    connect(“Enter Weblogic's Username Here”,”Enter Password Here″,”Hostname:PortNumber″)
    createAppRole(“Enter Applicationstripe Here”,”Enter Role Name here”)
    P.S: The Application stripe name is obi for the OBIEE set of roles.
    I have only a set of application roles which I want to move to another environment. The guid should stay identical so that the application roles get automatically applied on the copied catalog.If I am not wrong, Althought the GUID's can be different after the migration of the application roles between environments, the permissions still stay the same. and I believe the GUID's are system dependent and might be different across two instances. Correct me if I am wrong here.
    Does anybody know if that is also possible? I need to keep the guid but don't want to migrate the whole policy store.
    Thank you

  • FPGA - Synchroniz​ation between two loops with different loop rates.

    Hi all,
    I am trying to implement an Analog and Quadrature Decoder. Simply put, I have two loops:  LOOP 1 with an Analog Input (AI) which is a slower loop rate. Another loop: LOOP 2 has a digital input (input) and counts the Quadrature counts. I understand that Analog conversion is slower, and as a result,  LOOP 1 will have a slower higher tick rate. I want to pass the "counts" from LOOP 2 into LOOP1, so that I can synchronize the Analog Input with the number of quadrature counts. My issue at hand is: since LOOP 2 updates at a higher rate. Will the "counts" value that I pass/tunnel from LOOP 2 to LOOP 1 refresh at the LOOP 2's rate or at LOOP 1's rate.
    Thanks,
    Herrick Chang

    hlchang wrote:
    Hi all,
    I am trying to implement an Analog and Quadrature Decoder. Simply put, I have two loops:  LOOP 1 with an Analog Input (AI) which is a slower loop rate. Another loop: LOOP 2 has a digital input (input) and counts the Quadrature counts. I understand that Analog conversion is slower, and as a result,  LOOP 1 will have a slower higher tick rate. I want to pass the "counts" from LOOP 2 into LOOP1, so that I can synchronize the Analog Input with the number of quadrature counts. My issue at hand is: since LOOP 2 updates at a higher rate. Will the "counts" value that I pass/tunnel from LOOP 2 to LOOP 1 refresh at the LOOP 2's rate or at LOOP 1's rate.
    Thanks,
    Herrick Chang
    The only way to pass values between two parallel loops is by some sort of global variable (global or locals are fine, as are shared variables although I wouldn't recommend that for FPGA if you don't want to go outside of the FPGA target at all). Don't tunnel anything between two independant loops as they won't be independant anymore.
    The local variable will be updated at the rate the writing loop updates it, though your slower read loop will obviously not see every value. Note that the FPGA compiler will protect the local variable access in both loops in order to avoid race conditions. This protection is necessary but expensive in terms of runtime performance of each loop as well as FPGA gate usage.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Synchronize data between two offices

    Hi everyone,
    After building a database for our growing company, we have a problem with our data and its synchronization. Our company has a rather small, but growing, book warehouse and sells books online. We have been able to deal with orders and stock because sales were not that large.
    But today we sell more and more books and the addition of a database means we need to synchronize our data from the warehouse database to the main office one, mainly to be able to know what kind of stock we have. I think we will have to go with a batch syncing scheduled twice a day for now. We have been dealing with Talend open studio so far and enjoy the product.
    Do you think Talend will be able to stand that type of operation? What kind of software could be used in this case?
    Thanks all!

    So basically what you want to do is sync up two databases several times a day. You could use Talend Open Studio: it can efficiently do what you are asking, so stay with this tool.
    You might want to go check Talend 's page on data synchronization: http://www.talend.com/solutions-data-integration/data-synchronization.php
    Just the fact you already know the software and use it, you'll save a lot of time (and money) on this. it is much easier for you than taking a new one.

  • Transport content between two Portals (DEV - Prod)

    Hi Everybody,
    how can i transport a content from one Portal to another one? I heard there is a possibility in Visual Admin for transport Content between a Development and a Productive System.
    I know only the way by Federated Portal Network. Is this the only possibility and what about KM-Konfiguration is there a way for transporting?
    regards,
    Seed

    you can download and upload your portal  transports.
    System administrator -> transport.
    KM folders: you can just copy everything by open the KM dir as a webfolder.
    br

  • How can I synchronize Documents between two Macs

    My early 2007 iMac has been hospitalized for over two weeks waiting for a new logic board from Apple. I have a mid-2009 MacBook Pro to use in the meantime, but have never synchronized the two machines, so many files that I want/need are not available. When the iMac gets back home, I would like to copy the complete Documents fiolder from the iMac to the MacBook and then find some way of keeping them synchronized in the future. (Both my machines are running OS X 10.7.2.)

    InSearch wrote:
    you can check out syncmate - it syncs data between Macs. According to information at their website, folders can be synced in real time - seems like it's what you were looking for.
    According to information on their website you get 50MB for free and 200MB if you pay $40, I don't know about you but I fill 50MB very fast.
    http://www.sync-mac.com/syncmate-expert.html

  • Migrating data between two portal servers - same version

    I recently set up a new host to replace our existing Portal 6.0. Both hosts are running Solaris 9 and Portal 6.0. Right now, both hosts are up and running. Are there any docs on copying, or migrating the data from the old host to the new?
    I want to make sure we get all relevant information including user info, user settings and desktop layout etc. We are using the sample desktop that comes with Portal 6.0.
    I was wondering if I could accomplish this by backing up the LDAP database and restoring it on the new server. The only problem with this is there may be embedded references to the original server name and that would hose the new server.
    Any ideas on how the best accomplish this task?

    Hi to all,
    Client side eventing can be used when my both portal components are on same page , but here my portal components are not on same page to be more precise , i wanted to share a parameter between logon module and mast head component , so
    basically when use enters user name and password
    at that time my logon module is called and now after authentication , we get into the applications on top of which mast head component is present .
    In this case how to share the parameter  ??
    Regard
    Govardan

  • Mirrored Storage between two servers

    Hello,
    Is it possible to create redundant storage using two Windows 2012 r2 servers?  I've been looking all over and any HA options always reference having external shared storage presented to the cluster (I assume NAS/SAN).  I am also assuming that said
    posts expect that whatever tech is being used for shared storage deals with keeping that data fault tolerant (e.g., mirrored SAN) and the Windows cluster need not be aware of that happening in the background.
    Due to lack of any storage hardware in my environment I was hoping there was a way to create a redundant file share/system between two Windows 2012 r2 servers at which point I could then create an iSCSI target to present a virtual drive to an application
    server cluster.  That way if one of the "storage servers" fails it won't take down the application running on the app server.  I looked into DFS however since the app locks its files those won't replicate across.
    I hope my question wasn't too convoluted.
    Thanks for any guidance! 

    Hi Bkboudreau,
    If I am not misunderstand your question, you are finding the method for iSCSI target servers synchronize iSCSI data.
    Replication of data between sites is very important in a multi-site cluster, and is accomplished in different ways by different hardware vendors. You can choose the hardware
    storage vendor solution when you want to synchronize data between two shared storage.
    You cannot use the feature in Windows Server 2008 called Distributed File System Replication (DFS-R) as your data replication method in a multi-site cluster. DFS-R only performs
    its data replication after a file is closed. This works well for files such as documents, presentations, or spreadsheets, but it will not work for files that are held open, such as databases or virtual machines. You must choose a replication option other than
    DFS-R.
    The related KB:
    Requirements and Recommendations for a Multi-Site Failover Cluster
    http://technet.microsoft.com/zh-cn/library/dd197575(v=ws.10).aspx
    The similar thread:
    how to sync the data between the two iSCSI target server
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/067ba543-369c-4d22-9f00-1f41d7aedc00/how-to-sync-the-data-between-the-two-iscsi-target-server?forum=winserverClustering
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Difference in the display/rendering between two 7.4 portal systems

    Hi everyone,
    At this moment we are faced with a difference in the display/rendering between two 7.4 portal systems (see red area’s in screenshots). Both systems are green field installations.
    At our LAB system with EP-BASIS 1000.7.40.7.0.20140421205300 and EP-RUNTIME 1000.7.40.7.0.20140414131600 the portal is rendered as follows:
    Our development system DEV is based on EP-BASIS 1000.7.40.8.7.20141217073700 and EP-RUNTIME 1000.7.40.8.13.20150106224500. The portal is displayed as follows:
    Both portal systems use the standard SAP Gold Reflection theme.
    The expectation was that the DEV portal would have the same view as the LAB portal. Unfortunately, it appears that the DEV portal falls back to the older standard SAP Tradeshow theme when displaying (for example) the Portal Content Studio or the UWL. Different stylesheets (CSS) are loaded. There is no unified rendering and in our opinion this is not correct.
    SCN provides much information about the various rendering problems that exists in the use of Internet Explorer in combination with the SAP Portal. However, it is unclear to us where to start with the analysis of this problem.
    Answers / suggestions to the following questions will be highly appreciated:
    Is it correct that the portal by default should make use of UR when the SAP Gold Reflection theme is used?
    Is the difference of rendering caused by the difference in the versions of the EP BASIS / EP RUNTIME? (DEV portal has higher SP/patch level than LAB);
    How to investigate this issue further and finally solve it?
    Thanks in advance!
    Kind regards, Allan

    Hi Allan
    I hope you are well and many thanks for using the SAP Discussion Forums .
    Ok firstly in relation to this particular query, you can find additional information in the following documentation SAP Note:1852400 - UI theme designer (main note) .
    Regarding the GOLD Reflection theme from a general perspective this is supported only alongside the UFP framework.
    SAP Gold Reflection supports only Unified Rendering Lightspeed
    In relation to your two other queries. Could you kindly clarify which particular version of IE you are presently running and also if compability mode is presently enabled/disabled?
    Reference Documentation Look & Feel, Framework Pages and Portal Navigation
    http://scn.sap.com/docs/DOC-23058
    Kindly update me as per your findings.
    Kind Regards
    Troy Cronin - Enterprise Portal Support Engineer
    Follow - Troy Cronin

  • How to ...synchronization between two databases

    Hi,
    I want to set up automatic synchronization between two databases. For example, database DB1 and DB2 have table t1 and t2 with the same columns. If someone updates a record in table t1, I want automatically update the record in t2 or vice-versa.
    How can I make an automatic system like that?

    1) What is the business goal you're trying to satisfy? Failover, reporting, replication, geographic co-location, etc. each have their own set of technologies. Explaining what you're trying to accomplish from a business perspective will help us identify which technology (or technologies) to focus on.
    2) Are you synchronizing a single table? Or multiple tables? Or all the tables in a schema? Or all the tables in a database?
    3) Is there a stable network connection between the boxes?
    4) What version of Oracle do you have (10.2, 10.1, 9.2, 9.0.1, etc)? What edition (standard, express, enterprise, etc)?
    5) How quickly after a change has been made on DB1 does the change need to reflect on DB2?
    6) Am I correct in understanding that you want to be able to change the same row of data on either DB1 or DB2? So the replication needs to go in both directions?
    Justin

  • Toplink cache synchronization between two nodes using tomcat

    Hi,
    In our appcation we have two nodes. Using websphere we used to synchronize toplink cache between two nodes. Can we do same thing using tomcat.

    Yes, TopLink implements cache synchronization using JMS or RMI easily, which are not dependent on the server being used - though it JMS especially does require a JMS provider that is accessible from each node.  Cache synchronization is now cache coordination, and is described using JPA properties here:
    http://wiki.eclipse.org/EclipseLink/Examples/JPA/CacheCoordination
    the Toplink cache synchronization/coordination with JMS | EMBARCADEROS seems to be a good read for cache coordination over JMS, but is more aimed at TopLink's sessions.xml configuration.
    Best Regards,
    Chris

  • Intervals, synchronize the data between two oracle tables located in diffe

    Hi Experts,
    Is there any way I can, at set intervals, synchronize the data between two oracle tables located in different servers? What is the software, if there is any? If there are steps I can follow, so much the better.
    Thanks!

    I'm not sure what you want to achieve here...
    I want to synchronize both the Servers , so that it can update HO servers as well as Factory Server with the complete data. Could you please elaborate a little bit more; basing on your description I could also tell you how to setup timesync for those two servers if I understand "complete data" as the current date and time...
    Also a lot of solutions are platform and version specific so it would help if you could indicate OS and Database Versions (4 digit).
    And I still fail to see what this has to do with forms. You might want to post your question to the Database General forum: General Database Discussions
    cheers

  • How to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers

    Dears,
    I have IBM Flex server with built in storage,  
    HOW to to make Cluster between two  server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers?
    If there any prerequisites of the Share storage types ?and any configuration guide to deploy Cluster between two Server 2012 datacenter ?

    Microsoft Failover Clusters require shared storage.  If you wish to create a failover cluster with local storage, you need to use third party software to mirror the disks and present it to the hosts (siog.com, datacore.com, starwind.com).  If you
    use third party software, you will need to follow their instructions for configuring the environment.
    Questions on how to configure Exchange environments are better asked in an Exchange forum.
    .:|:.:|:. tim

  • Bestway to find difference between two roles in quality and production

    We have a process of collecting su53 dump and then analyze for missing authorization . However some time although everything works fine in quality , it fails in production . Hence I want to know a simple methodology to compare roles in quality and production to know difference ... Can anyone share best methodolgy being used in your setup ?
    NPB

    (1)How to find the difference between two dates at Universe level and at report Level in IDT?
    DaysBetween ([Sale Date];[Invoice Date]) returns 2 if [Sale Date] is 15 December 2001 and [Invoice Date] is 17 December 2001.
    (2) How to change format of dates from YYYY/MM/DD to DD/MM/YYYY in IDT at prompt level ?
    =FormatDate(ToDate(YOUR DARE OBJECT);"YYYY/MM/DD");"dd'/'MM'/'yyyy")
    =To_Char (object name, required format)
    Find the below link for more info.
    http://scn.sap.com/community/semantic-layer/blog/2014/04/18/bi41-business-layer-enhancements--create-display-format
    (3)What is VIEWS in IDT of data foundation layer when we right click? could u plz give one example where exactly we use VIEWS?
    A custom data foundation view is a subset of the data foundation Master view. You can use views when editing a large data foundation, and interested in working with a subset of tables. You can define multiple custom views for the data foundation due to the complexity of the data warehouse.
    Essentially, need created views for each individual star scheme (like Sales, Production, Finance, Accounting, etc.) plus a view for eachcomplex dimension structure (like Business Partner, Material, Customer, Plant etc.),
    Find the below link for more info.
    http://scn.sap.com/docs/DOC-54422
    (4) How to represent & report my IDT data in dashboards? could u plz explain the steps?
    Please find the below link: http://scn.sap.com/docs/DOC-27559

Maybe you are looking for