Synchronize RT target using NTP
Hello,
I would like to synchronize my system, composed of several RT target running Pharlap OS, with a NTP server located on a Windows 7 host computer.
I found some examples about how to do it using System Configuration Set Time VI.
I am considering calling this VI in a model or a Custom Device. Is it a right way to do it or is there better ?
More generally, is there any disadvantage of adjusting the clock during execution ?
If you can use LV2010 then use Network Streams, otherwise consider making your own tcpip communications vi. I would package up the data with a SOF,Payload, EOF, CRC and then require the receiver to return a verification message to complete the transfer.
Similar Messages
-
How to push a perticular request from PSA to Data target using DTP in BI
Hello all.
I have mulitple requests in PSA & wanted to move only perticular requests (Randomly, say first request & last request ) to data target using DTP in BI 7.0. How can we do this.. ? Is there any option in DTP (BI 7.0)for selective loading of requests from PSA to Data Target..
Thanks in advance..
Cheers,
sami.Hi,
It is possible by using 'zero fetch' in DTP
If you want only the recent req to be loaded.
1. In PSA, change the status of the recent request to red
2. Do a zero fetch
that is processing mode - No data transfer; delta status in source: fetched
With this processing mode you execute a delta without transferring data.
3. change the particular request status back to green
4. Run a delta load
Regards,
Priya.D -
Load status in PSA "Request not updated to any data target using delta"
Hi,
I need to delete the Unwanted request from PSA with status u201CRequest not updated to any data target using deltau201D
There are lot of requests are there in PSA but some of them loaded with status
u201CRequest updated in Data targetu201D u2013 I donu2019t want delete this requests.
Others u201CRequest not updated to any data target using deltau201D -- need to delete
We are deleting manually every week end.
Is there any program or tables which can delete automatically unwanted u201C Request not updated to any data target using deltau201D requests from PSA.
Thanks for your help in Advance,
Raj.Hi Rajesh,
You may create a simple process chain, where you could include the variant "Delete PSA Request".At the bottom of this variant maintenace screen you would find options exactly matching your requirements.It's a very simple option and should not take you more than 5 minutes.
Best Regards,
Bansi. -
Master data loads Request not updated to any data target using delta
When checking the PSA the request updated ICON has red triangle and the mouse over says
"Request not updated to any data target using delta".
I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1. DTP has not been implemented yet. The system was just upgraded in July. I am unable to schedule deletes from the PSA for successful loads. However, I think the data is updating to the info objects. My Info package has the selection to PSA then in the InfoObject package by package.
How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
Edited by: Joe Mallorey on Jan 27, 2009 5:46 PMHi shikha,
The load has not failed but I am unable to delete the load from the PSA.
If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
Thanks for the reply.
Regards,
JoeM -
Request not updated to any data target using delta
I am on BI 70 using 70 DataSource. I executed InfoPackage in full update, then ran DTP in full mode. There is only 1 data target. The requests were successfully updated in the target DSO. However, when I checked the datasource PSA, the requests were showing u201CRequest not updated to any data target using deltau201D with red triangle.
My questions are:
1. Is this normal?
2. I need to do more full loads. When I run DTP (in full mode) again, will it re-load those PSA requests (the ones already in DSO) to the same data target?
Thank you.
RebeccaHi Rebecca,
To answer your questions
1. Yes. This is normal.
2. Yes. When you run DTP in Full Mode again, this PSA request (along with any other subsequent loads you might have done to PSA) would be re-loaded to the same data target .
If this is not required you can set the DTP to delta mode. This ensures that the PSA request is updated to data target only once.
Hope this helps!
- Meera -
PSA showing Request not updated to any data target using delta
Hi BWers,
I am very new to SAP and have a IDES installed with BW. I am trying to do a simple data load from a flat file. I have managed to create a InfoPackage, but when I schedule it and then go into the data source -> manage and look at the screen :
Requests for PSA /BIC/Bxxxx
I see the Request updated having a Red triangle with an exclamation mark in it and it says
"Request not updated to any data target using delta"
Wondering if someone can help me resolve this so that I can further create a DTP and load the data into the InfoObject.
Thanks for all your help.
ManishReg : Delta Load : Production Data
Current Scenario :
we have existing system pulling data from 0CO_OM_WBS_6 ,ZPS_0CO_OM_NWA_2
Structure underlying infocube:
2 Data Sources >> 1DSO >>1 Infocube .
Usually the Data is loaded in delta format on daily basis using process chains.
For last one month the delta is not picking properly :
Example :
A WBS Element is created 2 years back and it open and getting its update into BW ,
latest amount or cost incurred for the WBS Element is not picked for certain WBS only :
I have Tried Giving a Full Infopack load to the DSO , but as DataStructure was migrated from 3.5 to 7 landscape :
its showing this error:
Request not updated to any data target using delta,
i went and created DTP which didnt help much Because latest isnt caputered .
if i goto RSA1old and find the full req and trigger it ,it says inti overlapping ,
how to over come this as this is a production issue
Obaid : pls help me on this issue , any others expert pls help -
ALL IP SLAs to dmVPN spokes give invalid RTT=1 . Nodes use NTP. What can be the reason for this?
IP SLA Measurements are invalid. RTT should be 20 to 60ms, but IP SLAs deliver RTT=1ms. This applies for UDP Jitter and UDP echo IP SLAs.
Nodes use NTP time.you can use any router you want - I use a netgear others belkin - up to you.
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Replication / synchronization with MaxDB using Windows
Hi,
is there somewhere a tutorial how to use replication / synchronization with MaxDB using Windows?
I found information about the Synchronization Manager but it seems that it's no more available for Download.
The Database Studio description points out that it will be useable for MaxDB 7.7 and upper versions,
but I can't also find V7.7 anywhere for download...
So do I need and where can I get it?
Thanks,
AndreHi Wolgang,
thanks for your support - this is the output:
C:\Program Files\sapdb\indep_prog\bin>Exception in thread "main" java.lang.Unsat
isfiedLinkError: no swt-win32-2128 in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at org.eclipse.swt.internal.Library.loadLibrary(Library.java:104)
at org.eclipse.swt.internal.win32.OS.<clinit>(OS.java:42)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at org.eclipse.swt.internal.Library.getPlatform(Library.java:49)
at org.eclipse.swt.internal.Library.loadLibrary(Library.java:83)
at org.eclipse.swt.internal.Callback.<clinit>(Callback.java:31)
at org.eclipse.swt.SWT.getPlatform(SWT.java:2227)
at org.eclipse.swt.SWT.<clinit>(SWT.java:2368)
at org.eclipse.jface.action.ActionContributionItem.<clinit>(ActionContri
butionItem.java:60)
at org.eclipse.jface.action.ContributionManager.insertAfter(Contribution
Manager.java:268)
at com.sap.sdb.syncMan.gui.SyncManGUI.drawMSG_LRU(SyncManGUI.java:1422)
at com.sap.sdb.syncMan.gui.SyncManGUI.createMenuManager(SyncManGUI.java:
428)
at org.eclipse.jface.window.ApplicationWindow.addMenuBar(ApplicationWind
ow.java:223)
at com.sap.sdb.syncMan.gui.SyncManGUI.<init>(SyncManGUI.java:230)
at com.sap.sdb.syncMan.gui.SyncManGUI.main(SyncManGUI.java:821)
Thanks,
Andre -
RV042 - Time is not being set automatically using NTP
I have 4 RV042 routers with the latest 1.3.12.19-tm firmware. I cannot get the router to set its time automatically. On the Setup->Time page I have a bullet next to "Set the local time using .. (NTP) automatically". Time Zone is set to GMT-05:00 (Eastern). I do have a checkmark next to Daylight Saving and have defined the from and to date range. The default factory setting has "Set using NTP automatically" and a blank value for NTP Server. The docs do not state if you have to type in your own NTP server. Since the date was showing as 2002, I assumed it did not like a blank NTP server. So, why do they make that the default? And, if a value is required, why not warn the user when you click on Save Setting button?
Assuming it needed a value entered for NTP Server, I typed in 2.pool.ntp.org - which works just fine on my Windows 2003 server. Yet the time still remains stuck in 2002...
I also wondered whether NTP queries should appear in the system log (or on my SYSLOG server). So far I do not see any hint of an NTP query occurring.
Any ideas?
-Thanks,
-MikeSince my initial post I have done a lot more testing and searching and have found:
1. I can get the RV042 to sync its time properly if I run Dillobits Software's SNTP Service application on my laptop and point the RV042 to use that as the time reference - works perfectly every time.
2. It does not matter if my laptop (running SNTP Service) is on a WAN port or the LAN port - so long as the RV042 has the IP address of the laptop it will find the time service (I had a thought the problem may have been the RV042 was expecting to find the time service on a WAN port, not internally on the network)
3. I have checked and double checked all the registry settings on the W2k3 Server and I'm abolutely confident they are correctly set for it to provide a reliable NTP time service
4. I have found quite a number of posts on various forums regarding people having problems getting Cisco products to sync time with W2k3 Server. From memory, these were all Cisco products running IOS and (also from memory) the ones I read were all resvolved, usually by tidying up some settings in one or the other of the products. I have not found any solution for Linksys products and W2k3 Server.
5. At least a couple of people have had their problem resolved by changing the value of the Windows Time Service registry key LocalClockDispersion to 0. I have tried this, along with using other values small and large but without success.
6. SNTP and NTP packets are identical - the difference between the two protocols being how much work the application using the time information does to process the data (eg: the amount and complexity of statistical processing done to determine the time accurately and the method of adjusting the clock)
The conclusion I have come to is that while the RV042 should happily sync to the W2k3 Server, there is something within the time packet sent by the W2k3 Server time service that the RV042 objects to (ie: it doesn't consider it to be a reliable time source or something) and therefore rejects it.
With that, I have exhausted every path I have found that may offer a solution so unless someone else can get to the bottom of this I will purchase Dillobits Software's SNTP Service and run that on the W2k3 Server.
Regards
Derek -
RMAN duplicate target using set until telling me it can not find data files
I have RMAN scripts that I use freqently to clone a database from DB (production) to another (non-prod). These work just fine. I use the set until so that I can tell it at what point I want the new DB to be created from the backups of the source.
I had a request to go back a few weeks and the backup files (I do compressed backups to disk) were on tape. I had my backup person restore my backup directory for the source DB as it looked on a certain day (May 28). I have an 8 day retention policy and so the backup files that were restored showed files all the way back to 5/20 ( includes the point I want to use in my set until clause).
However, whenever I try to execute the rman clone, it tells me for each datafile:
RMAN-06023: no backup or copy of datafile 1 found to restore
Like I said, I am able to do this for a current backup that is on disk. I moved the backup files to the source db server and it works fine. However, from these files restored from tape it errors.
Here is the RMAN script:
spool log to c:\temp\clone_CSPROD_CSPRSUM1.log;
#connect to catalog <catalog info>
# target is the source and auxiliary is destination
#connect target <put in source info here>
#connect auxiliary /
run {
allocate auxiliary channel d1 type disk format 'F:\backups\CSPROD\d1\CSPROD_DATA_%s';
allocate auxiliary channel d2 type disk format 'F:\backups\CSPROD\d2\CSPROD_DATA_%s';
allocate auxiliary channel d3 type disk format 'F:\backups\CSPROD\d3\CSPROD_DATA_%s';
allocate auxiliary channel d4 type disk format 'F:\backups\CSPROD\d4\CSPROD_DATA_%s';
allocate auxiliary channel a1 type disk format 'F:\backups\CSPROD\a1\CSPROD_arch_%s';
##Archivelog number get from sql archive log list command
#set until sequence 831;
set until time "to_date('2011-05-25 08:00:00', 'YYYY-MM-DD HH24:MI:SS')";
duplicate target database to CSPRSUM1 nofilenamecheck
logfile
group 1('+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log') size 50m,
group 2('+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log') size 50m,
group 3('+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log') size 50m;
Exit
Here is the output:
Spooling started in log file: c:\temp\clone_CSPROD_CSPRSUM1.log
Recovery Manager11.1.0.7.0
RMAN> #connect catalog <redacted info>>
2> # target is the source and auxiliary is destination
3> #connect target <redacted info>
4> #connect auxiliary /
5>
6> run {
7> allocate auxiliary channel d1 type disk format 'F:\backups\CSPROD\d1\CSPROD_DATA_%s';
8> allocate auxiliary channel d2 type disk format 'F:\backups\CSPROD\d2\CSPROD_DATA_%s';
9> allocate auxiliary channel d3 type disk format 'F:\backups\CSPROD\d3\CSPROD_DATA_%s';
10> allocate auxiliary channel d4 type disk format 'F:\backups\CSPROD\d4\CSPROD_DATA_%s';
11> allocate auxiliary channel a1 type disk format 'F:\backups\CSPROD\a1\CSPROD_arch_%s';
12> ##Archivelog number get from sql archive log list command
13> #set until sequence 831;
14> set until time "to_date('2011-05-25 08:00:00', 'YYYY-MM-DD HH24:MI:SS')";
15> duplicate target database to CSPRSUM1 nofilenamecheck
16> logfile
17> group 1('+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log') size 50m,
18> group 2('+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log') size 50m,
19> group 3('+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log') size 50m;
20> }
starting full resync of recovery catalog
full resync complete
allocated channel: d1
channel d1: SID=534 device type=DISK
allocated channel: d2
channel d2: SID=533 device type=DISK
allocated channel: d3
channel d3: SID=532 device type=DISK
allocated channel: d4
channel d4: SID=531 device type=DISK
allocated channel: a1
channel a1: SID=530 device type=DISK
executing command: SET until clause
Starting Duplicate Db at 15-JUN-11
RMAN-05529: WARNING: DB_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to disk group only.
contents of Memory Script:
set until scn 260398799;
set newname for datafile 1 to
"+data";
set newname for datafile 2 to
"+data";
set newname for datafile 3 to
"+data";
set newname for datafile 4 to
"+data";
set newname for datafile 5 to
"+data";
set newname for datafile 6 to
"+data";
set newname for datafile 7 to
"+data";
set newname for datafile 8 to
"+data";
set newname for datafile 9 to
"+data";
set newname for datafile 10 to
"+data";
set newname for datafile 11 to
"+data";
set newname for datafile 12 to
"+data";
set newname for datafile 13 to
"+data";
set newname for datafile 14 to
"+data";
set newname for datafile 15 to
"+data";
set newname for datafile 16 to
"+data";
set newname for datafile 17 to
"+data";
set newname for datafile 18 to
"+data";
set newname for datafile 19 to
"+data";
set newname for datafile 20 to
"+data";
set newname for datafile 21 to
"+data";
set newname for datafile 22 to
"+data";
set newname for datafile 23 to
"+data";
set newname for datafile 24 to
"+data";
set newname for datafile 25 to
"+data";
set newname for datafile 26 to
"+data";
set newname for datafile 27 to
"+data";
set newname for datafile 28 to
"+data";
set newname for datafile 29 to
"+data";
set newname for datafile 30 to
"+data";
set newname for datafile 31 to
"+data";
set newname for datafile 32 to
"+data";
set newname for datafile 33 to
"+data";
set newname for datafile 34 to
"+data";
set newname for datafile 35 to
"+data";
set newname for datafile 36 to
"+data";
set newname for datafile 37 to
"+data";
set newname for datafile 38 to
"+data";
set newname for datafile 39 to
"+data";
set newname for datafile 40 to
"+data";
set newname for datafile 41 to
"+data";
set newname for datafile 42 to
"+data";
set newname for datafile 43 to
"+data";
set newname for datafile 44 to
"+data";
set newname for datafile 45 to
"+data";
set newname for datafile 46 to
"+data";
set newname for datafile 47 to
"+data";
set newname for datafile 48 to
"+data";
set newname for datafile 49 to
"+data";
set newname for datafile 50 to
"+data";
set newname for datafile 51 to
"+data";
set newname for datafile 52 to
"+data";
set newname for datafile 53 to
"+data";
set newname for datafile 54 to
"+data";
set newname for datafile 55 to
"+data";
set newname for datafile 56 to
"+data";
set newname for datafile 57 to
"+data";
set newname for datafile 58 to
"+data";
set newname for datafile 59 to
"+data";
set newname for datafile 60 to
"+data";
set newname for datafile 61 to
"+data";
set newname for datafile 62 to
"+data";
set newname for datafile 63 to
"+data";
set newname for datafile 64 to
"+data";
set newname for datafile 65 to
"+data";
set newname for datafile 66 to
"+data";
set newname for datafile 67 to
"+data";
set newname for datafile 68 to
"+data";
set newname for datafile 69 to
"+data";
set newname for datafile 70 to
"+data";
set newname for datafile 71 to
"+data";
set newname for datafile 72 to
"+data";
set newname for datafile 73 to
"+data";
set newname for datafile 74 to
"+data";
set newname for datafile 75 to
"+data";
set newname for datafile 76 to
"+data";
set newname for datafile 77 to
"+data";
set newname for datafile 78 to
"+data";
set newname for datafile 79 to
"+data";
set newname for datafile 80 to
"+data";
set newname for datafile 81 to
"+data";
set newname for datafile 82 to
"+data";
set newname for datafile 83 to
"+data";
set newname for datafile 84 to
"+data";
set newname for datafile 85 to
"+data";
set newname for datafile 86 to
"+data";
set newname for datafile 87 to
"+data";
set newname for datafile 88 to
"+data";
set newname for datafile 89 to
"+data";
set newname for datafile 90 to
"+data";
set newname for datafile 91 to
"+data";
set newname for datafile 92 to
"+data";
set newname for datafile 93 to
"+data";
set newname for datafile 94 to
"+data";
set newname for datafile 95 to
"+data";
set newname for datafile 96 to
"+data";
set newname for datafile 97 to
"+data";
set newname for datafile 98 to
"+data";
set newname for datafile 99 to
"+data";
set newname for datafile 100 to
"+data";
set newname for datafile 101 to
"+data";
set newname for datafile 102 to
"+data";
set newname for datafile 103 to
"+data";
set newname for datafile 104 to
"+data";
set newname for datafile 105 to
"+data";
set newname for datafile 106 to
"+data";
set newname for datafile 107 to
"+data";
set newname for datafile 108 to
"+data";
set newname for datafile 109 to
"+data";
set newname for datafile 110 to
"+data";
set newname for datafile 111 to
"+data";
set newname for datafile 112 to
"+data";
set newname for datafile 113 to
"+data";
set newname for datafile 114 to
"+data";
set newname for datafile 115 to
"+data";
set newname for datafile 116 to
"+data";
set newname for datafile 117 to
"+data";
set newname for datafile 118 to
"+data";
set newname for datafile 119 to
"+data";
set newname for datafile 120 to
"+data";
set newname for datafile 121 to
"+data";
set newname for datafile 122 to
"+data";
restore
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 15-JUN-11
released channel: d1
released channel: d2
released channel: d3
released channel: d4
released channel: a1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/15/2011 11:21:42
RMAN-01005: not all datafiles have backups that can be recovered to scn 260398799
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 122 found to restore
RMAN-06023: no backup or copy of datafile 121 found to restore
RMAN-06023: no backup or copy of datafile 120 found to restore
RMAN-06023: no backup or copy of datafile 119 found to restore
RMAN-06023: no backup or copy of datafile 118 found to restore
RMAN-06023: no backup or copy of datafile 117 found to restore
RMAN-06023: no backup or copy of datafile 116 found to restore
RMAN-06023: no backup or copy of datafile 115 found to restore
RMAN-06023: no backup or copy of datafile 114 found to restore
RMAN-06023: no backup or copy of datafile 113 found to restore
RMAN-06023: no backup or copy of datafile 112 found to restore
RMAN-06023: no backup or copy of datafile 111 found to restore
RMAN-06023: no backup or copy of datafile 110 found to restore
RMAN-06023: no backup or copy of datafile 109 found to restore
RMAN-06023: no backup or copy of datafile 108 found to restore
RMAN-06023: no backup or copy of datafile 107 found to restore
RMAN-06023: no backup or copy of datafile 106 found to restore
RMAN-06023: no backup or copy of datafile 105 found to restore
RMAN-06023: no backup or copy of datafile 104 found to restore
RMAN-06023: no backup or copy of datafile 103 found to restore
RMAN-06023: no backup or copy of datafile 102 found to restore
RMAN-06023: no backup or copy of datafile 101 found to restore
RMAN-06023: no backup or copy of datafile 100 found to restore
RMAN-06023: no backup or copy of datafile 99 found to restore
RMAN-06023: no backup or copy of datafile 98 found to restore
RMAN-06023: no backup or copy of datafile 97 found to restore
RMAN-06023: no backup or copy of datafile 96 found to restore
RMAN-06023: no backup or copy of datafile 95 found to restore
RMAN-06023: no backup or copy of datafile 94 found to restore
RMAN-06023: no backup or copy of datafile 93 found to restore
RMAN-06023: no backup or copy of datafile 92 found to restore
RMAN-06023: no backup or copy of datafile 91 found to restore
RMAN-06023: no backup or copy of datafile 90 found to restore
RMAN-06023: no backup or copy of datafile 89 found to restore
RMAN-06023: no backup or copy of datafile 88 found to restore
RMAN-06023: no backup or copy of datafile 87 found to restore
RMAN-06023: no backup or copy of datafile 86 found to restore
RMAN-06023: no backup or copy of datafile 85 found to restore
RMAN-06023: no backup or copy of datafile 84 found to restore
RMAN-06023: no backup or copy of datafile 83 found to restore
RMAN-06023: no backup or copy of datafile 82 found to restore
RMAN-06023: no backup or copy of datafile 81 found to restore
RMAN-06023: no backup or copy of datafile 80 found to restore
RMAN-06023: no backup or copy of datafile 79 found to restore
RMAN-06023: no backup or copy of datafile 78 found to restore
RMAN-06023: no backup or copy of datafile 77 found to restore
RMAN-06023: no backup or copy of datafile 76 found to restore
RMAN-06023: no backup or copy of datafile 75 found to restore
RMAN-06023: no backup or copy of datafile 74 found to restore
RMAN-06023: no backup or copy of datafile 73 found to restore
RMAN-06023: no backup or copy of datafile 72 found to restore
RMAN-06023: no backup or copy of datafile 71 found to restore
RMAN-06023: no backup or copy of datafile 70 found to restore
RMAN-06023: no backup or copy of datafile 69 found to restore
RMAN-06023: no backup or copy of datafile 68 found to restore
RMAN-06023: no backup or copy of datafile 67 found to restore
RMAN-06023: no backup or copy of datafile 66 found to restore
RMAN-06023: no backup or copy of datafile 65 found to restore
RMAN-06023: no backup or copy of datafile 64 found to restore
RMAN-06023: no backup or copy of datafile 63 found to restore
RMAN-06023: no backup or copy of datafile 62 found to restore
RMAN-06023: no backup or copy of datafile 61 found to restore
RMAN-06023: no backup or copy of datafile 60 found to restore
RMAN-06023: no backup or copy of datafile 59 found to restore
RMAN-06023: no backup or copy of datafile 58 found to restore
RMAN-06023: no backup or copy of datafile 57 found to restore
RMAN-06023: no backup or copy of datafile 56 found to restore
RMAN-06023: no backup or copy of datafile 55 found to restore
RMAN-06023: no backup or copy of datafile 54 found to restore
RMAN-06023: no backup or copy of datafile 53 found to restore
RMAN-06023: no backup or copy of datafile 52 found to restore
RMAN-06023: no backup or copy of datafile 51 found to restore
RMAN-06023: no backup or copy of datafile 50 found to restore
RMAN-06023: no backup or copy of datafile 49 found to restore
RMAN-06023: no backup or copy of datafile 48 found to restore
RMAN-06023: no backup or copy of datafile 47 found to restore
RMAN-06023: no backup or copy of datafile 46 found to restore
RMAN-06023: no backup or copy of datafile 45 found to restore
RMAN-06023: no backup or copy of datafile 44 found to restore
RMAN-06023: no backup or copy of datafile 43 found to restore
RMAN-06023: no backup or copy of datafile 42 found to restore
RMAN-06023: no backup or copy of datafile 41 found to restore
RMAN-06023: no backup or copy of datafile 40 found to restore
RMAN-06023: no backup or copy of datafile 39 found to restore
RMAN-06023: no backup or copy of datafile 38 found to restore
RMAN-06023: no backup or copy of datafile 37 found to restore
RMAN-06023: no backup or copy of datafile 36 found to restore
RMAN-06023: no backup or copy of datafile 35 found to restore
RMAN-06023: no backup or copy of datafile 34 found to restore
RMAN-06023: no backup or copy of datafile 33 found to restore
RMAN-06023: no backup or copy of datafile 32 found to restore
RMAN-06023: no backup or copy of datafile 31 found to restore
RMAN-06023: no backup or copy of datafile 30 found to restore
RMAN-06023: no backup or copy of datafile 29 found to restore
RMAN-06023: no backup or copy of datafile 28 found to restore
RMAN-06023: no backup or copy of datafile 27 found to restore
RMAN-06023: no backup or copy of datafile 26 found to restore
RMAN-06023: no backup or copy of datafile 25 found to restore
RMAN-06023: no backup or copy of datafile 24 found to restore
RMAN-06023: no backup or copy of datafile 23 found to restore
RMAN-06023: no backup or copy of datafile 22 found to restore
RMAN-06023: no backup or copy of datafile 21 found to restore
RMAN-06023: no backup or copy of datafile 20 found to restore
RMAN-06023: no backup or copy of datafile 19 found to restore
RMAN-06023: no backup or copy of datafile 18 found to restore
RMAN-06023: no backup or copy of datafile 17 found to restore
RMAN-06023: no backup or copy of datafile 16 found to restore
RMAN-06023: no backup or copy of datafile 15 found to restore
RMAN-06023: no backup or copy of datafile 14 found to restore
RMAN-06023: no backup or copy of datafile 13 found to restore
RMAN-06023: no backup or copy of datafile 12 found to restore
RMAN-06023: no backup or copy of datafile 11 found to restore
RMAN-06023: no backup or copy of datafile 10 found to restore
RMAN-06023: no backup or copy of datafile 9 found to restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN> Exit
Recovery Manager complete.
Edited by: kerrygm on Jun 15, 2011 11:36 AMMaybe making progress.
I got into RMAN and did a List backup command. In looking at the output, I see that it does have the 5/20 backup showing. Here is part of the output:
BS Key Type LV Size Device Type Elapsed Time Completion Time
965689 Full 19.86M DISK 00:00:01 16-JUN-11
BP Key: 967942 Status: AVAILABLE Compressed: NO Tag: TAG20110616T231223
Piece Name: F:\BACKUPS\CSPROD\C-368871413-20110616-01
SPFILE Included: Modification time: 16-JUN-11
SPFILE db_unique_name: CSPROD
Control File Included: Ckp SCN: 369596068 Ckp time: 16-JUN-11
BS Key Size Device Type Elapsed Time Completion Time
966218 403.84M DISK 00:00:00 20-MAY-11
BP Key: 967842 Status: AVAILABLE Compressed: YES Tag: TAG20110520T231012
Piece Name: F:\BACKUPS\CSPROD\A1\CSPROD_ARCH_5844
List of Archived Logs in backup set 966218
Thrd Seq Low SCN Low Time Next SCN Next Time
1 2112 237027300 20-MAY-11 237046947 20-MAY-11
1 2113 *237046947* 20-MAY-11 237059284 20-MAY-11
1 2114 237059284 20-MAY-11 237216514 20-MAY-11
1 2115 237216514 20-MAY-11 237709545 20-MAY-11
1 2116 237709545 20-MAY-11 237722825 20-MAY-11
1 2117 237722825 20-MAY-11 237730431 20-MAY-11
1 2118 237730431 20-MAY-11 237860199 20-MAY-11
I then changed my rman script to use the *237046947* SCN number that says it is from 5/20. I them kicked off my rman script and got the following result.
Spooling started in log file: c:\temp\clone_CSPROD_CSPRSUM1.log
Recovery Manager11.1.0.7.0
RMAN> #connect catalog 'rmancat/rmancat@rmancat';
2> # target is the source and auxiliary is destination
3> #connect target sys/<pwd>@csprod
4> #connect auxiliary /
5>
6> run {
7> allocate auxiliary channel d1 type disk format 'F:\backups\CSPROD\d1\CSPROD_DATA_%s';
8> allocate auxiliary channel d2 type disk format 'F:\backups\CSPROD\d2\CSPROD_DATA_%s';
9> allocate auxiliary channel d3 type disk format 'F:\backups\CSPROD\d3\CSPROD_DATA_%s';
10> allocate auxiliary channel d4 type disk format 'F:\backups\CSPROD\d4\CSPROD_DATA_%s';
11> allocate auxiliary channel a1 type disk format 'F:\backups\CSPROD\a1\CSPROD_arch_%s';
12> ##Archivelog number get from sql archive log list command
13> set until sequence 237046947;
14> ##set until time "to_date('2011-05-20 08:00:00', 'YYYY-MM-DD HH24:MI:SS')";
15> duplicate target database to CSPRSUM1 nofilenamecheck
16> logfile
17> group 1('+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log') size 50m,
18> group 2('+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log') size 50m,
19> group 3('+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log') size 50m;
20> }
allocated channel: d1
channel d1: SID=532 device type=DISK
allocated channel: d2
channel d2: SID=533 device type=DISK
allocated channel: d3
channel d3: SID=531 device type=DISK
allocated channel: d4
channel d4: SID=555 device type=DISK
allocated channel: a1
channel a1: SID=534 device type=DISK
executing command: SET until clause
Starting Duplicate Db at 17-JUN-11
RMAN-05529: WARNING: DB_FILE_NAME_CONVERT resulted in invalid ASM names; names changed to disk group only.
contents of Memory Script:
set until scn 373021170;
set newname for datafile 1 to
"+data";
set newname for datafile 2 to
Starting restore at 17-JUN-11
channel d1: starting datafile backup set restore
channel d1: specifying datafile(s) to restore from backup set
channel d1: restoring datafile 00003 to +DATA
channel d2: restoring datafile 00122 to +DATA
channel d2: reading from backup piece F:\BACKUPS\CSPROD\D4\CSPROD_DATA_6149
channel d3: starting datafile backup set restore
channel d3: specifying datafile(s) to restore from backup set
channel d3: restoring datafile 00002 to +DATA
channel d3: restoring datafile 00020 to +DATA
channel d4: restoring datafile 00120 to +DATA
channel d4: reading from backup piece F:\BACKUPS\CSPROD\D2\CSPROD_DATA_6147
channel d1: piece handle=F:\BACKUPS\CSPROD\D3\CSPROD_DATA_6148 tag=TAG20110616T230013
channel d1: restored backup piece 1
channel d1: restore complete, elapsed time: 00:01:15
channel d4: piece handle=F:\BACKUPS\CSPROD\D2\CSPROD_DATA_6147 tag=TAG20110616T230013
channel d4: restored backup piece 1
channel d4: restore complete, elapsed time: 00:03:15
channel d2: piece handle=F:\BACKUPS\CSPROD\D4\CSPROD_DATA_6149 tag=TAG20110616T230013
channel d2: restored backup piece 1
channel d2: restore complete, elapsed time: 00:03:35
channel d3: piece handle=F:\BACKUPS\CSPROD\D1\CSPROD_DATA_6146 tag=TAG20110616T230013
channel d3: restored backup piece 1
channel d3: restore complete, elapsed time: 00:04:55
Finished restore at 17-JUN-11
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "CSPRSUM1" RESETLOGS ARCHIVELOG
MAXLOGFILES 23
MAXLOGMEMBERS 3
MAXDATAFILES 1021
MAXINSTANCES 8
MAXLOGHISTORY 584
LOGFILE
GROUP 1 ( '+DATA/CSPRSUM1/onlinelog/redo1a.log', '+FRA/CSPRSUM1/onlinelog/redo1b.log' ) SIZE 50 M ,
GROUP 2 ( '+DATA/CSPRSUM1/onlinelog/redo2a.log', '+FRA/CSPRSUM1/onlinelog/redo2b.log' ) SIZE 50 M ,
GROUP 3 ( '+DATA/CSPRSUM1/onlinelog/redo3a.log', '+FRA/CSPRSUM1/onlinelog/redo3b.log' ) SIZE 50 M
DATAFILE
'+DATA/csprsum1/datafile/system.1535.754067379'
CHARACTER SET WE8MSWIN1252
contents of Memory Script:
switch clone datafile all;
executing Memory Script
datafile 2 switched to datafile copy
input datafile copy RECID=1 STAMP=754067676 file name=+DATA/csprsum1/datafile/sysaux.1536.754067379
datafile 121 switched to datafile copy
input datafile copy RECID=120 STAMP=754067677 file name=+DATA/csprsum1/datafile/waapp.1653.754067403
datafile 122 switched to datafile copy
input datafile copy RECID=121 STAMP=754067677 file name=+DATA/csprsum1/datafile/cu_custom.1549.754067381
contents of Memory Script:
set until scn 373021170;
recover
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 17-JUN-11
starting media recovery
Oracle Error:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 1 needs more recovery to be consistent
ORA-01110: data file 1: '+DATA/csprsum1/datafile/system.1535.754067379'
released channel: d1
released channel: d2
released channel: d3
released channel: d4
released channel: a1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/17/2011 15:14:54
RMAN-03015: error occurred in stored script Memory Script
RMAN-06053: unable to perform media recovery because of missing log
RMAN-06025: no backup of archived log for thread 1 with sequence 3818 and starting SCN of 372868482 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3817 and starting SCN of 372685133 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3816 and starting SCN of 372593528 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3815 and starting SCN of 372374385 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3814 and starting SCN of 372325053 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3813 and starting SCN of 372316138 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3812 and starting SCN of 372249619 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3811 and starting SCN of 371775981 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3810 and starting SCN of 371643855 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3809 and starting SCN of 371614442 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3808 and starting SCN of 371432892 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3807 and starting SCN of 371121955 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3806 and starting SCN of 371047786 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3805 and starting SCN of 371029095 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3804 and starting SCN of 371018252 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3803 and starting SCN of 370947755 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3802 and starting SCN of 370857440 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3801 and starting SCN of 370814417 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3800 and starting SCN of 370797061 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3799 and starting SCN of 370756569 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3798 and starting SCN of 370746833 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3797 and starting SCN of 370746693 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3796 and starting SCN of 370746568 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3795 and starting SCN of 370746068 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3794 and starting SCN of 370745451 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3793 and starting SCN of 370733767 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3792 and starting SCN of 370674629 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3791 and starting SCN of 370501026 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3790 and starting SCN of 370498513 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3789 and starting SCN of 370497977 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3788 and starting SCN of 370497635 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3787 and starting SCN of 370497319 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3786 and starting SCN of 370496938 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3785 and starting SCN of 370495428 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3784 and starting SCN of 370491173 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3783 and starting SCN of 370390074 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3782 and starting SCN of 370385574 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3781 and starting SCN of 370385310 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3780 and starting SCN of 370385044 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3779 and starting SCN of 370368486 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3778 and starting SCN of 370333960 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3777 and starting SCN of 370330980 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3776 and starting SCN of 370327876 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3775 and starting SCN of 370174433 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3774 and starting SCN of 370148373 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3773 and starting SCN of 370147821 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3772 and starting SCN of 370147623 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3771 and starting SCN of 370141528 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3770 and starting SCN of 369711271 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3769 and starting SCN of 369621694 found to restore
RMAN-06025: no backup of archived log for thread 1 with sequence 3768 and starting SCN of 369595614 found to restore
RMAN> Exit
Recovery Manager complete.
What I am not sure is if the SCN I used in my set until sequence command was from 5/20, when I look at the backup pieces that it is reading to restore from, they appear to be from backup files taken from June.
(e.g channel d1: reading from backup piece F:\BACKUPS\CSPROD\D3\CSPROD_DATA_6148 -- this is a 6/16 backup file).
Also, as you can see it was not able to do a media recovery.
Thanks in advance for your help. -
Synchronization of Target Group with BW
Hi,
In SAP Library, it is mentioned that "To keep target group information in the BW System up-to-date, CRM and BW must be synchronized. You activate this synchronization by choosing the Synchronization with BW indicator from the properties of the target group. "
The link is : http://help.sap.com/saphelp_crm50/helpdata/en/2b/59dc46c50911d3b29b0050da3ee986/frameset.htm
When I open the Target Group Properties in Segment Builder, there is no field for setting this indicator.
Can someone please help.
Regards,
MonicaHi Monica,
Unfortunately I am not a BI expert. But the best practice document "Essential Information for SAP Best Practices for BI" might give you some insight. Please refer to the document
<b>Reward if helps,</b>
Regards,
Paul Kondaveeti -
In DVD SP when setting a target use track or chapter marker?
If you have muliple tracks, slideshows and menus in your project and the tracks have only one chapter marker and you have the option of setting as a target, the track or the chapter marker which should you use or does it matter? Also would the same rule apply for setting the "next or "previous" targets in the advanced connections? I hope I am being clear on this, if not I can add more info.
Jeff
In DVD SP there will be some limits on how you can move markers, they will not be frame accurate.
I usually use the key commands to jump back and forth between markers, then use inspector to nudge
You can also try to just export the Final Cut movie with the new marker positions and use that to set the markers in DVD SP then use the previously encoded video
Take a look here for this workaround that is good if markers do not show up and also will do what you need now
http://dvdstepbystep.com/fasttrackover.php -
Sequencing a node in Target using XSLT
Hi,
I need to give numbering to a node on the target evertime it occurs irrespective of the any field in the source. How can this be achieved using XSLT? I know this can be acheived using ora seq, but we do not want to touch the DB.
My target should like this
<root>
<Item>
<id>1</id>
<value>some mapping from source</value>
</Item>
<Item>
<id>2</id>
<value>some mapping from source</value>
</Item>
<Item>
<id>3</id>
<value>some mapping from source</value>
</Item>
</root>
the node id should be generated whenever the parent node Item occurs.
How can this be achieved using XSLT?
Thanks and Regards,
Kamal
Edited by: Kamal Dheeraj on 11-Jan-2011 01:13Hi Shanmu,
Thanks for the reply.
position() and the count will not help in this case as the source is a cascading structure and we have filters on the source, hence i cant get numbers in sequence. Any other workaround please.
Thanks,
Kamal -
How to delete Duplicate records from the informatica target using mapping?
Hi, I have a scenario like below: In my mapping I have a source, which may containg unique records or duplicate records. Source and target are different tables. I have a target in my mapping which contains duplicate records. Using Mapping I have to delete the duplicate records in the target table. Target table does not contain any surrogate key. We can use target table as a look up table, but target table cannot be used as source in the mapping. We cannot use post SQL.
Hi All, I have multiple flat files which i need to load in a single table.I did that using indirect option at session level.But need to dig out on how to populate substring of header in name column in target table. i have two columns Id and Name. in all input file I have only one column 'id' with header like H|ABCD|Date. I need to populate target like below example. File 1 File2 H|ABCD|Date. H|EFGH|Date.1 42 5 3 6 Target tale: Id Name1 ABCD2 ABCD3 ABCD4 EFGH5 EFGH6 EFGH can anyone help on what should be the logic to get this data in a table in informatica.
-
Tinyos won't compile for 'tinynode' target using the msp430 toolchain
Meanwhile, trying to compile Blink example for tinynode:
[takeda@takeda Blink]$ make tinynode
mkdir -p build/tinynode
compiling BlinkAppC to a tinynode binary
ncc -o build/tinynode/main.exe -Os -Os -mdisable-hwmul -mstrict-align -fnesc-separator=__ -Wall -Wshadow -Wnesc-all -target=tinynode -fnesc-cfile=build/tinynode/app.c -board= -DDEFINED_TOS_AM_GROUP=0x22 -DIDENT_APPNAME=\"BlinkAppC\" -DIDENT_USERNAME=\"takeda\" -DIDENT_HOSTNAME=\"takeda\" -DIDENT_USERHASH=0x3831b7f8L -DIDENT_TIMESTAMP=0x4e84bf69L -DIDENT_UIDHASH=0x4131c4c7L -fnesc-dump=wiring -fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs, components)' -fnesc-dumpfile=build/tinynode/wiring-check.xml BlinkAppC.nc -lm
nesc1: invocation of msp430-gcc to find builtin macros failed (error message output follows)
Using built-in specs.
Reading specs from /usr/lib/gcc/msp430/4.5.3/../../../../msp430/lib/msp430mcu.spec
COLLECT_GCC=msp430-gcc
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/msp430/4.5.3/lto-wrapper
Target: msp430
Configured with: /home/takeda/sfw/gcc-msp430/src/gcc-4.5.3/configure --prefix=/usr --infodir=/usr/share/info --mandir=/usr/share/man --disable-libssp --disable-nls --target=msp430 --enable-languages=c,c++ --with-gnu-as --with-gnu-ld --with-as=/usr/bin/msp430-as --with-ld=/usr/bin/msp430-ld --with-pkgversion=mspgcc_20110716
Thread model: single
gcc version 4.5.3 (mspgcc_20110716)
COLLECT_GCC_OPTIONS='-v' '-E' '-dM' '-mdisable-hwmul' '-mstrict-align' '-mmcu=msp430f1611' '-mcpu=430' '-mmpy=16' '-mivcnt=16' '-mcpu=430' '-mmpy=16' '-mivcnt=16'
/usr/libexec/gcc/msp430/4.5.3/cc1 -E -quiet -v -imultilib mmpy-16 -D__MSP430F1611__ /dev/null -mcpu=430 -mcpu=430 -mmpy=16 -mmpy=16 -mivcnt=16 -mivcnt=16 -mdisable-hwmul -mstrict-align -mmcu=msp430f1611 -mcpu=430 -mmpy=16 -mivcnt=16 -mcpu=430 -mmpy=16 -mivcnt=16 -dM
cc1: error: unrecognized command line option "-mstrict-align"
ignoring nonexistent directory "/usr/lib/gcc/msp430/4.5.3/../../../../msp430/sys-include"
#include "..." search starts here:
#include <...> search starts here:
/usr/lib/gcc/msp430/4.5.3/include
/usr/lib/gcc/msp430/4.5.3/include-fixed
/usr/lib/gcc/msp430/4.5.3/../../../../msp430/include
End of search list.
cc1: warning: -mdisable-hwmul deprecated, use -mmpy=none
nesc1: internal error: couldn't define builtin macros - exiting
make: *** [exe0] Error 1
[takeda@takeda Blink]$
Last edited by takeda (2011-09-29 19:00:51)in file /opt/tinyos-2.1.1/support/make/tinynode.target i've done for the moment the following
# mod_by_takeda
PFLAGS += -mmpy=none
# PFLAGS += -mdisable-hwmul
# mod_by_takeda
# PFLAGS += -mstrict-align
and now a very simple project compiles. (like a helloword app).
I geuss i am gonna have problems later..
Maybe you are looking for
-
Action buttons to display orders per specific period - Agentry
Hi; I am working on SAP Work Manager 6.0 customizing using Agentry 6.1.3. I have these two toolbar buttons that I have created, that is, "Previous Week" and "Next Week". I would like to say, when the use clicks on "Previous week", only Orders for the
-
I have a digital audio coax input on my stero reciever. When I connect my macbook 1/8th inch audio out port to the coax input on my reciever, my stereo says that it cannot detect any digital signal. Is that because my macbook output is sending an ana
-
I has a spaz moment and tried to move my library dont ask why, and i hit delete i tried going to the recycle bin and restoring it. But its still no where to be found, i just bought all these songs!! Please any help will do
-
What is the point of Location Services?
I have an iPod Touch and some Apps keep asking me to switch this on. What is the point and will it drain my battery? Thanks
-
Ipod sync would delete its library
My mother in law has an Ipod Classic that her sister loaded down with music and "books on tape" but has never synced it to her Itunes. When she tried, she gets an error message that her entire library would be deleted - how do we get it into her Itun