Synchronized sampling from PCI-mounted card and PXI-mounted card

Hi, everyone
My latest problem concerns sampling. I need to acquire samples from around 20 different (differential) channels and my PCI-card (NI-6224) has only 16 differential inputs. I do, however, have another card (NI-6229) mounted in our PXI-system. This PXI-system seems to be connected to the computer with a network cable. When i try to perform synchronized sampling from these cards with the PCI-card as master I get an error message saying that these cards cannot cooperate. There must be a way to do this...?
I'm using DAQmx and labview 8
Einar

Hello!
It is just a matter of taste I guess but I think PXI chassis and synchronization is more convenient since you don’t have to care about physical wires or a RTSI cable.
Data will be stored at your host since it is the Windows application and LabVIEW with its DAQmx Read functions that actually transfer the data from the buffer created by DAQmx to LabVIEWs memory space in RAM.
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal

Similar Messages

  • MAX does not detect my PXI-5122 and PXI-6551 cards in a PXI-1045 chassis.

    I have been using a PC with MXI-3 to PXI-1045 chassis to develop LabView TestStand code.  Things are fine on my development PC.  [Software configuration report attached nireport_rich.txt].
    I have a 2nd PC set aside to test my deployment packages.  I installed a GPIB card and MXI-3 card in my deployment test PC, and loaded a bunch of hardware drivers.  [Report attached nireport_depPC_0006.txt]
    All the PXI cards are found just fine when my development PC is connected, but when I power up my deployment PC (with MXI-3 connected to the 1045 chassis) -- I can't import the development configuration [exported from development PC] because the deployment PC does not see the PXI-6551 DIO card in slot 6 [PXI6::10::INSTR] and the PXI-5122 card in slot 13 [PXI8::15::INSTR].
    I keep reviewing the hardware driver versions installed, and the only small difference that I see at this point is that the deployment PC has a slightly older version of NI-Switch.
    Anybody have any ideas of what I can try next?  I'm out of ideas.
    . . . . hmmm, can't seem to attach more than one file, so here's the software info on the deployment PC
    NI Software Information:
    CVI Run-Time 7.0.0.395
    NI-DAQ 7.3.0f1
    NI-DAQmx 7.3.1f0
    NI Script Editor 1.1
    NI-DMM 2.3.1
         Soft Front Panel 2.3.0
    NI-FGEN 2.2.1
         FGEN Soft Front Panel 2.2
    NI-488.2 Software 2.30
    IVI Compliance Package 2.2 2.2
    LabVIEW Run-Time 7.0
    Measurement & Automation Explorer 3.1.1.3003
    Measurement Studio 6.0
         For Visual Basic 
              ActiveX User Interface 7.0.0.344
              ActiveX 3D Graph 7.0.0.344
              ActiveX DataSocket 4.2.2.1
    NI-USI 1.0.2
    NI-HSDIO 1.2.1.3
    NI-HWS 1.2.2.0
    NI-PAL Software 1.8.2.0
    NI-SCOPE 2.7.0f5
         SCOPE Soft Front Panel 2.1.0
    NI Spy 2.2.0.12
    NI-SWITCH 2.30.49153
    NI-TClk 1.2
    TestStand 3.1
    NI-VISA 3.2
         visa32.dll 3.2.0.19
         NiVisaServer.exe 3.2.0.19
         NIvisaic.exe 3.2.0.19
    LabVIEW Run-Time 7.1

    Hello Maggie,
    Appreciate your assistance and reply.
    The pxisys.ini and pxiesys.ini files are modified by me with referring to
    1)PXI System Alliance PXI-2 SW spec,
    2)PXI-6 SW spec,
    and 3)pxisys.ini pxiesys.ini generated by MAX v5.3.0f0 with NI PXIe-1075 + NI PXIe-8133.
    The content in pxisys.ini/pxiesys.ini generated by MAX looks like simple. Consequently, I modified and checked it line by line according to actual hardware of PXES-2590+PXIe-3975. Then, MAX just list devices as described in the first post. I tried to find the root cause but in vain.
    Is this minor issue can be related any incorrect tag lines in pxisys.ini or pxiesys.ini I posted?
    Is any suggestion tests I can do to troubleshoot root cause?
    Looking forward your reply.
    Cheers,
    KL Tseng

  • PO from SO via DI API:Base document card and target document card do not ..

    HI All,
    I am trying to create Purchase Order from Sales Order. This is possible by GUI (on Sales Order on logistics tabs Click On Purcase Orders CheckBox.
    I got the error message: -5002-Base document card and target document card do not match.
    The message itself can be understandable, because the Customer and Supplier has a different CardCode.
    I am sure I am using a correct code
    oPo.Lines.BaseType = BoObjectTypes.oOrders
    oPo.Lines.BaseEntry = sDocEntry
    oPo.Lines.BaseLine = iLineNum
    Where oPo is a Purchase Order document.
    sDocEntry is a Sales Order docentry and iLineNum is a Line number of Sales Order
    For other A/R to A/R and A/P to A/P documents are working fine.
    Has anybody found this error or has anybody created application like this?
    I am using sbo2007PL46
    Regards,
    J.

    Hi guys,
    this is still on the suggestion page:
    Link existing Purchase Orders to (Sales) Orders via DI API : View Idea
    I tryed with 9.1 PL 4 and it didn't work.

  • HT201274 Has anyone taken an iPhone from USA to Europe and switching SIM cards?

    Has anyone taken an iPhone from USA to Europe and switching SIM cards?

    SacramentoFred wrote:
    Has anyone taken an iPhone from USA to Europe and switching SIM cards?
    Yes

  • HT3702 Is it possible to have one credit card and two debit cards on my itunes account so that we can use different cards for different purchases?

    Is it possible to have a number of cards (say one credit card and two debit cards) to be listed as the payment cards for my itunes account, so that different cards can be used for different purchases?  Or can you only have one card registered on itunes at any one time?

    So is there any way that three members of a family can share one itunes account but pay for their own purchases, other than inputting their own cards each time they make a purchase.
    No, there is no way to do that.
    Or if we all have our own individual itune accounts, can we share each other's music, or can you only sync your iphone/ipad/mac, with one itune account at a time?
    You can sync content from up to five iTunes Store accounts to any given computer or device. You just will each have to copy the content into your own libraries so you can sync to your devices and have your devices authorized to all applicable accounts.
    Regards.

  • I just bought this iPad today any I set up my iTunes account and I purchased a app store card and a iTunes card but when I try to dowload stuff it won't let me what's the problem

    Need help please I just bought this iPad today and I factory reset it and then I plugged into my laptop and downloaded the latest software I went and purchased a app store card and a iTunes card but when I try to download apps it won't let me if anyone can help with this problem it would be greatly appreciated. Thanks in advance. Antawn

    Hello Tntingey,
    The gift card you've given your father must be redeemed via the steps below.
    Redeeming iTunes Gift Cards and content codes
    http://support.apple.com/en-us/HT201209
    Cheers,
    Allen

  • My daughter added songs with her I Tunes Card and My credit card was charged, what do I do?

    My daughter added songs with her I tunes card and my credit card was charged, how do I get it off my credit card?

    What process did your daughter use, there is a specific format to redeem an iTunes gift card. The gift card must be redeemed using the Redeem link in the Quick Links on the right side of the iTunes Store in iTunes on a computer or the Redeem button at the bottom of both the iTunes and App Store apps in iOS. Redeeming the gift card then applies the value of the card as an available credit to the user's iTunes account. The credit is used first before any bank card also stored in the account. If the purchases use the entire credit and there is an additional balance due, it will be charged to any bank card stored in the account.

  • Please help! -5002,Base document card and target document card do not match

    Hi
    When I try to save an invoice with a payment thro' the DI API I get the following error :
    <b>-5002,Base document card and target document card do not match</b>
    Why am I getting this error and how can I solce it?
    Thanks

    Hi,
    For the sake of anyone else who has this problem:
    After much searching for the answer to why I was getting this message I found that the internal validation must be case sensitive and so 'C00417' on the receipt was not matching 'c00417' on the invoice.

  • Base document card and target document card do not match

    I ran into this error "Base document card and target document card do not match" while uploading Outgoing Payments too AP Invoices.
    The CardCode of the Invoice matches the CardCode of the Payment so it's not that issue. I can't seem to fix this error.
    Any input would be helpful.
    Here's screenshots too
    OVPM - Payments
    VPM1 - Payments_Checks
    VPM2 - Payments_Invoices

    Hi,
    For the sake of anyone else who has this problem:
    After much searching for the answer to why I was getting this message I found that the internal validation must be case sensitive and so 'C00417' on the receipt was not matching 'c00417' on the invoice.

  • HT201304 I have been trying for two weeks to log into iTunes using my Bank of America Visa Debit card but no progress. Is it that iTunes does not use debit card, I only have a debit card and  Not credit card, so does it mean I can't use iTunes .?

    I have been trying for two weeks to log into iTunes using my Bank of America Visa Debit card but no progress. Is it that iTunes does not use debit card, I only have a debit card and  Not credit card, so does it mean I can't use iTunes .?

    I believe if you haven't already setup an itunes account, if you have access to computer with iTunes installed , you can create an iTunes account on that computer with no credit/debit card and then just buy iTunes cards at your local retailer to get credits.

  • Differences between iTunes Gift Card and iTunes Apps Card

    Hi,
    this is my question: what are the differences between iTunes Gift Card and iTunes Apps Card?
    thank You!

    what are the differences between iTunes Gift Card and iTunes Apps Card?
    The only difference is the picture on the front.
    You can use either for anything in the iTunes store.

  • HT5035 Can you have an iTunes gift card and a credit card on the same iTunes account?

    I still have money left on my iTunes gift card, but not enough for a purchase. So I was wondering if I add a credit card to my account, when I make a purchase will it use the rest of the money from my gift card and then charge from my credit card, or would it merely cancel out the gift card and replace it with my credit card?

    Yes, it will, unless you make a purchase which can't be done with a gift card, in which case the balance will remain and the entire purchase be charged to the credit card.
    (66706)

  • Windows 7 driver for GeForce 320m Graphic Card and Broadcom wireless card

    I just got my 11" MacAir (2011)and installed Windows 7 on it using Parallel software. Everything works fine except for the driver for the Broadcom BCM 43xx1.0 airport wireless card and for the GeForce 320m graphic card. Windows 7 cannot find the drivers. I have tried everything to find a solution: Downloaded the drivers from the Broadcom and NVIDIA websites, used the drivers that came with bootcamp and made changes to the nvao.inf file for the graphic card problems but nothing works. Does anyone know a solution to these problems? Many thanks.

    Hi,
    since Parallels is not an Apple product it would be better to use their own Support resources.
    However, Parallels does not use the native (real) hardware of your Mac but virtualizes certain hardware.
    The video adapter is a "VGA and SVGA with VESA 3.0 compatible Video Adapter" and the WiFi is mapped to a "Ethernet Virtual network card compatible with RTL8029".
    For these virtual devices Parallels brings all drivers with it and names them "Parallels Tools" which you have to install manually while in our Parallels Windows virtual machine.
    Refer to the Parallels User Guide http://download.parallels.com/desktop/v6/docs/en/ParallelsDesktop_UsersGuide/
    Regards
    Stefan

  • HP 6300 using the built in video card and a quad card to support 6 monitors.

    I am try to configure a HP 6300 Micro Tower to support 6 monitors. I have installed a NVIDIA NVS510 card and installed it but not the built in video card is disabled how do I enable both cards to work at the same time?
    This question was solved.
    View Solution.

    Hi:
    Below is the link to the service manual for the Pro 6300.
    http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c03612810/c03612810.pdf
    Please take a look at chapter 3, page 23.
    There is a bios setting to enable/disable the onboard video.
    Integrated Video (enable/disable). Use this option to disable the integrated video controller
    when another video controller is present in the system. Default is enabled.
    My assumption is that when you add a PCIe x16 video card, the onboard video is automatically disabled in the BIOS.
    See if you can change the O/B video setting back to Enabled to see if that will allow both video devices to work at the same time.
    If the setting is grayed out or it enables the onboard video but disables the PCIe x16 card, then I guess it can't be done.

  • I bought a $50.00 dollar Itune card and redeemed my card on Itunes and I went to the apple store to get some music and I was asked for my credit card info and was charged not only on my credit card but on the itunes card as well $ 8.65

    can anyone please tell me how the **** am I suppose to take care an issue on line or my cell phone if no one at the apple store or what ever if all u do is keep getting a machine, my issue is that i bought $50.00 dollar itunes card and then i went to the apple store to redeem my card at witch time i had $50.00 on my account. so i go to itunes to download some music on itunes so i buy the album Blackstreet/ another level For $ 8.65 and was asked for my credit card infor and was charged the same amount of $ 8.65 toi my card.how can I go about getting that money back on my card?

    Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store.
    Regards.

Maybe you are looking for