Synchronizing my AdobeID with Vendor ID (txtr)

Hi there,
I was following all the instructions to synchronize my AdobeID with my Txtr vendor ID so that I can read my DRM-protected ebooks on my ipad in the txtr app. So I used the Account synchronization tool on the adobe website and selected my ebook vendor as txtr and entered my vendor login and password which is my email adress as login and then my password. When I then say Login I get the following message: Bad username, password, or different account than what is requested. So what am I doing wrong and why can't I synchronize it so that I can read my DRM-protected ebooks on Txtr?
Thanks so much
Louise

Hi all,
Good news! The problem was resolved (many thanks to Patrick Rütter from txtr support)!
In order to sync Adobe ID and txtr accounts you'd enter your txtr ID as below:
txtr.int:[email protected] (prefix txtr.int for my case; txtr.gb for GB and so forth).

Similar Messages

Collaboration with vendor via Portal?

Hi everyone :
   I meet a problem about collaboration with vendor. Our customer has lots of vendor ,and our customer expect that their vendor could query related R/3 report real-time via Portal on Internet .
   I had done the SSO between Portal and R/3, and the user who had Portal user and R/3 both could access R/3 via Portal easily. We can create user for vendor in Portal easily, but it is impossible that we create user for all of vendors in R/3 , because of R/3 user need to pay for license. So vendors could not query R/3 report via Portal now .
    My problem :
    1. Vendors can't query R/3 report via Portal now.
Is there anyone met this problem ever , and How to solve this problem ?
    2.On the assumption that our vendor can query R/3 report via Portal now, how can we control the authorization that certain vendor could query his data only, can't query other vendor's data ?
    Any advice and discuss is welcome!
Best Regards,
Jianguo Chen
Message was edited by: jianguo chen
Message was edited by: jianguo chen

Hi Brian
which datasource u r using?
i think u used read only LDAP + Databse
when u chang the password for user in portal than after corresponding user password in LDAP directory are not changed thas't why it's generated a message that
password expires and u can't change the password
so try to change the password in LDAP also.
hope it's helps u.
regards,
kaushal

REPORT FOR SOURCE LIST OF MATERIAL WITH VENDOR DESCRIPTION

Dear All
Let me know is any transaction where i will get the material source list similar as me03 transaction but
with vendor name also .
Regards,
Rajendra Sawant.

Hi Rajendar,
I am sorry but the vendor name cannot be displayed in this or any other T-code.
Or you can select the Vendor code for which you want to see the vendor name and clik on the Vendor tab above.
Rwd if helpful.
Regards,
Robin.

Raw material stock report with vendor wise

Dear all ,
Can any one tell me , How do I get stock report only on " VENDOR " wise .
The purpose is , I've multiple souces for one Material , I need analyse the available inventory with vendor wise.
Pl.s help
Thanks in Advance
Sekhar

Hi,
1. Once you receive the mateiral inside the plant the identity of vendor is lost.
2. All the stock will get as Plant / Sloc Stock only.
3. Incase if you need vendor wise stock then you need to activate batch management, with Classification view and one characteristics as vendor.
4. And during each GR you need to enter the vendor value
Else you will not be able to seggregate the available stock vendor wise.
reg
dsk

Data transfer of BP with Vendor details using the EDT tool - BP_XDT - KCLJ

Hi All,
I'm trying to use the EDT tool with transfer type 15 to upload a BP into R3 with Vendor details. I've successfully created the BP and Vendor, however I was looking to extend the migration to include purchase org data, unfortunately I couldnu2019t see any of the LFM1 type fields on the BUS_DI structure.
Has anyone used this tool to upload this kind of data? If so how did you do it?
Also I've seen a OSS note 510095 which talks about how to extend the structures used by the tool, however this always seems to cause a short dump. Has anyone applied the instructions and had a successful outcome? Once again if you've done this could you please share your experience?
Kind Regards,
Hiten Mistry.

Hi
I am having the same problem. how did you eventually resolve this?
christopher

Replacement order with vendor

Hi experts
I have a question on if SAP supports an replacement order with vendor.
The scenario is the client could do a return PO with their vendor and then create another replacement order just to exchange the physical goods, there is no cost incurred for the replacement.
The thing is if we handle such scenario with one return PO + new PO, there would definitely by financial impact as in invoice creation, LIV, etc.
Therefore, would like to see if there is any SAP best practice / standard functions that we can make use of.
Thanks and BR
Dom

hi,
Could anyone please tell me why PO with vendor unknown is needed ?
> Its mostly required when you wanna raise the procurement in any urgency or if the person entering the PO donot have a right to directly send the PO to the vendor or in case the vendor is required to be decided when the PO is being made...
And what is the difference between PR and PO with vendor unknown ( If vendor is unknown , to whom should we send the PO then ) ?
> When you save such PO, it is indirectly saved as PR only(internally), so there is no such difference physically....It not send to any of the vendor untill the PO is entered with the required vendor and send and saved as PO...
What is the process cycle if we use a PO with vendor unknown . I know the process cycle with Vendor known .
When you make such PO the system will ask you while saving with the tab " Save as PR" or PO with no vendor defined.....you need to click on it and save the PO as PR...
Regards
Priyanka.P

Clearing with Vendor / Customer

Dear Expert,
If a vendor is maintained in foreign currency (in $ USD) and customer in local currency (in Rs. PKR).
My question is that, Whether we can clear open items between them through clearing with vendor/customer.
Regards
Ali

Hi,
So the customer (in Rs.PKR) line items will be converted into $ USD as per the exchange rate in table for clearing and the resulting exchange gain or loss will be posted.
Have you ever tested the above transaction.
Regards
Ali

Acquisition with vendor and without vendor

Dear All,
This is my first time using FA in SAP Business One.
I have a lot of question about FA in SAP B1 especially in FA Acquisition.
There are two kinds of acquisition. With vendor and without vendor.
If we choose the aquisition with vendor, we must enter the vendor and the JE will be created like this
                                  Debit             Credit
V01                                                 1500 USD
Asset Computer       1500USD
It seems the the JE create like AP invoice, so we can continue the out going payment for the vendor.
But the problem is in Acquisition without vendor.
I have a scenario.
I buy a car. I create PO > GRPO> AP invoice--> Out going Payment.
After that if i run the acquisition without vendor.
The JE will be created like this
                                                                Debit       Credit
Clearing Acc. Asset Acquisition                             1500Usd
Asset Car                                                 1500 USD
( Please correct me if my Journal is wrong )
From this Journal Posting, i find some thing odd.
When i buy a car and i created the GRPO.
The JE will create the Asset car position in Debit.
After that i create the Acquisition without vendor. The Journal also posting the Asset Car account in Debit. So the Asset Car account balance become 3000 USD.
So what must i do to avoid this problem.
I check the document FA. It is said that before create the Acquisition without vendor, the AP invoice must already be created.
In the documentation, they create the AP invoice in service type. Is it a must to create the AP invoice like this ?
Please tell me what should i do if create the Acquisition without vendor.
Any suggest or solution would be great.
Thanks in advance
Regards
KK

Fixed Assets are created in the add on, not the item master.
Your choice is that
1. all fixed asset puchases go through a clearing account and a different team is responsible for creating the assets & performing the acquisition, (1 step for one team, two for another) or
2 that the person acquiring the asset creates the master data item in fixed assets, then the acquisition with vendor (one two step process)
Depends on the size of the organisation and the roles & responsibilities within the organisation

Purchase Rebate Process with Vendor - Material Group combination in SAP

Hi Guru's,
I have done with Purchase Rebate Process with Material in SAP by doing following steps,
Created Agreement Type with Material Rebate
Created Rebate Pricing Procedure
Created Schema Group, Vendor
Maintained Purchase Rebate Agreement via MEB1 and created a Purchase Order where I could able to view the Rebate condition type gets determined based on the rebate agreement which has been created for a specific material.
Now from experts I would like to know the Volume based rebate arrangements Purchase Rebate Process with Vendor - Material Group combination in SAP .
If required provide with detail steps explaining what configuration and master data to be in place to complete this process.
Following thread I got it from SCN.SAP forum,
http://scn.sap.com/thread/3663225
Where it has been discussed this type of requirement Purchase Rebate Process with Vendor - Material Group combination would be a GAP.
Kindly throw some ideas on this process to carryout from my end.
Regards,
Kumar.S

Experts,
Please respond if post is not clear then let me know.
Regards,
Kumar.S

Replication Error with Vendor Master Records

Hello,
We are trying to replicate vendor master records from R/3 to SRM via BBPGETVD. When we go to SLG1, there is an error stating Business Partner XXXX: Invalid Value 0003 for field Authorization Group.
Currently, the AP dept. maintains the field Authorization Group in the Vendor Master Record 'Control' screen with a fixed value of 0003 (LFA1-BEGRU). When the replication occurs, SRM complains that this field value does not exist in a SRM customizing table or is a fixed value.
Do we need to implement the BBP_TRANSDATA_PREP BAdI to pass this value as a fixed value to replicate vendors?
-regards
Shaz Khan

I'm planning to implement bbp_transdata_prep. Wondering if either one of you can help. I've also opened another thread with my specific questions.
Replication Error with Vendor Master Records

Rec.acc balance with vendor wise

Hi all,
one rec. acc using for many vendors
how i can get the report
one rec acc balance with vendor wise.
thanks!!
lakshmi,

Hi Lakshmi
you can take this report with the help of ZFBL1N- mention the details and here you can give your recon account towards GL Account. mention the vendor code in the range- genearate report. this will give exactly the same as you are in need.
Regards
Shridhar

Report of blocked invoices when GR mismatch with vendor submitted invoice

Hi Experts,
Is there any standard report other than MRBR, if GR mismatch with vendor submitted invoice ?
Regards,
Sattuj

Yes, you need to check out MB5S. This report is great and will display green and red flags.

HT1386 Hello, I synchronized my iPhones with iTunes, having a new laptop, I had to do this step. But instead of helping it, I lost many applications. All my good applications disappeared. How do I get them back? What I have to do? I bought those app!!!

Hello, I synchronized my iPhones with iTunes, having a new laptop, I had to do this step. But instead of helping it, I lost many applications. All my good applications disappeared. How do I get them back? What I have to do? I bought those app!!!
How is this possible? How can the iTunes eat what I bought and what for? To buy the applications again?! Geez!
Tell me the solution. It must exist one!

You can redownload you previously purchased apps for free as long as they are still available in the app store. Be sure you are logged into the Apple ID in iTunes used to purchase them, then follow this guide: http://support.apple.com/kb/HT2519.

Is synchronous scenario possible with JDBC & JMS adapter?

Suppose,JDBC adapter is updating a table or deleting some entry from a table.Can we have an acknowledgement back that the work has been done successfully??
same qstn for JMS adapter also..
Suppose JMS adptr is communicating with any messaging system,can we have acknowledgement back?

Jms Adapter supports Asynchronous scenarios only but If u want to use Synchronous then possible with Standard module beans :
For ex: JMS to Rfc synchronous scenario:
In id:
Sender jms adapter supports Asynchronous scenarios so we have to use standard module beans in Module tab.
Like :
AF_Modules/RequestResponseBean -> 0
CallSapAdapter
AF_Modules/ResponseOnewayBean -> 1
And Provide values in configuration:
0 -> passThrough -> true
1 -> receiverChannel ->provide RECEIVER JMS adapter name ( have to create one more JMS receiver communication channel for responce )
1 -> receiverService ->provide receiver adapter service name (that is provide sender business component because need response for sender )
jdbc adapter :
http://www.****************/Tutorials/XI/SOAP2JDBC/Page1.htm

Sub Contracting: CO product is lying with vendor instead fo own

Hi expert
when i am taking Co product with movement 545 (0).system showing stock with vendor instead of own storage location,
regad
Nabil

Hi
USe of 545 O movemnet
If a component is entered with a negative quantity for the subcontract order, the receipt of the by-product is posted to stock provided to vendor during goods receipt for purchase order or during the subsequent adjustment.
so now you need to do 542 movement manually to bring back the stock to unrestricted use

Synchronizing my AdobeID with Vendor ID (txtr)

Similar Messages

Maybe you are looking for