Synchronizing subscribed folders for ... error

Once in awhile ... oh say once a week, Outlook's 2010 "synchoronizing subscribed folders for ..." fails to complete during a send/receive. Seems random. When this happens I am asked to submit my apple mail acccount password. Clearing that then waiting for upwards to a day, and the problem seems to go away. Mail is sent/received and iCal is sync'd, but the subscribed folders are not.
The problem with ignoring this issue is auto-check for mail stops until I either enter my password or I click cancel.
I suspect issues with Apple's servers, but generally (but not always) they report all is fine.
Any suggestions?

Hi,
As per the description, I'm assuming that you are having synchronization issue with your IMAP account in Outlook.
"Synchronizing subscribed folders for [email protected] and Checking for new mail in subscribed folders on
[email protected]" - This is not an error message, did you see any sync errors in Outlook? Any Send/Receive error codes?
You can try below steps to troubleshoot the issue:
Check if your email account settings (incoming/outgoing mail server, server port numbers...) are correct. You can get this information from your ISP or email administrator.
Disable virus scanner integration.
Loading Outlook in Safe Mode to see if add-ins are the cause of the issues: Press Win + R and type "outlook.exe /safe" in the blank box, then press Enter.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Error synchronizing subscribed folders in MS Outlook 2010

I get this error message when I open MS Outlook 2010 in Windows 7 after creating a new email profile
! Task 'Synchronizing subscribed folders for ( my email address )'
reported error (0x800CCC0F) : 'Outlook cannot synchronize subscribed folders for ( my email address ).
Error: This IMAP command cannot be sent to the server before the connection was terminated. If you continue to receive this message, contact your server administrator or Internet service provider (ISP)' How can I fix this problem, please?

Solution
Navigate to
File >> Options >> Advanced
>> scroll down to the send/receive heading >> click on the send/receive button on the right
On the right hand side of the send/receive groups window that opens click on the
Edit button
Un-check the "Get folder unread count for subscribed folders"
Under Received mail items, check the option "User the custom behavior defined below"
In the window below that displays your Gmail folders just select inbox and leave the others unchecked
Click Ok and then exit out of options and perform a send/receive to test if it is now working
This worked for me.

Error while trying to retrieve text for error ORA-12705

I am getting the message "Error while trying to retrieve text for error ORA-12705" when trying to connect to a remote oracle database on the network.
I can access this database using:
sqlplus username/password@database
from a dos prompt.
For some reason I can't connect when using PHP (through my local Apache2 server on Windows XP).
'phpinfo' says oracle in enabled (installed as per: http://www.oracle.com/technology/pub/notes/technote_php_instant.html), so I'm pretty sure the problem isn't with php itself.
My guess is it's something with Apache, and maybe environment variables or user permissions or instantclient (10).
All the folders, from instantclient to the Apache server have full permissions set for "Everyone" which I would assume includes this mysterious "nobody" user I've read about.
As for instantclient, I have placed that "tnsnames.ora" file from the oracle server there, and that hasn't changed much.
I've tried setting, unsetting, editing (environment variables):
LD_LIBRARY_PATH
ORACLE_HOME
ORACLE_SID
TNS_ADMIN
NLS_LANG
ORA_NLS33
in both the system environment, and even with PHP's "putenv" function. (Note: and restarting each time I changed a system var.)
In PHP i'm using:
$c = oci_connect("username","pasword", "database")
I've tried OCILogon instead of oci_connect
For "database" I've tried:
- using the path to the oracle db: //Oracle1/e/oracle/ora81
- mapping the path to x: drive and using: x:/oracle/ora81
- using the name of the database by itself
- using the name of the database underscored with the database name
- using "(ADDRESS=(PROTOCOL=TCP)(HOST = host)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=database)))"
I have tried everything I can find from:
the Oracle installation page: http://www.oracle.com/technology/pub/notes/technote_php_instant.html
the Oracle troubleshooting page: http://www.oracle.com/technology/tech/php/htdocs/php_troubleshooting_faq.html#connect
and these forumswith no results, just the same error.
I have also spent about 16 hours Googling for help, and nothing.
Can someone please tell me, what exactly does a user using:
Windows XP
Apache 2
PHP
intantclient10
Oracle 8i (on a remote server)
need to do to connect to Oracle before jumping off a bridge?

Turns out Oracle was previously installed on this company laptop :(
I deleted any 'Oracle' mention in the registry with 'regedit' (from the command line) using the Find option. Not sure if it's always a good idea to do that, but I backed up the important stuff first anyway.
I uninstalled and reinstalled everything using the same guide mentioned above, and then it worked.
Now I can be friends with Oracle again.
Would be nice if the "Deinstall" removed the registry entries that caused this issue...

Fix for Error 1417 with new itunes 7

This worked for me when I got that unknown error - 1417 (can't update ipod)
Step 1: Disable all third party programs and services via MSCONFIG
Article with step by step instructions found here:
http://docs.info.apple.com/article.html?artnum=302538
Step 2: Restart the computer
Step 3: Uninstall quicktime through the control panel in add/remove programs
Step 4: Uninstall itunes through the control panel in add/remove programs
Step 5: Uninstall any/all ipod updaters or ipod for window software through the control panel in add/remove programs
Step 6: Delete program file folders for itunes and quicktime:
--On the Start menu, click My Computer (or double-click My Computer on the Desktop).
--In My Computer, open Local Disk. (C Drive)
--Open Program Files.
--Right-click on the iTunes folder and click Delete from the shortcut menu.
--Right-click on the QuickTime folder and click Delete from the shortcut menu.
--Open the iPod folder.
--Right-click on the bin folder and click Delete from the shortcut menu. Note: If you are unable to delete the \Program Files\iPod\bin folder, see the "iPodService.exe Alert" section below.
--Navigate to C:\Windows\system32\.
--Remove the files QuickTime.qts and QuicktimeVR.qtx.
Step 7: Restart computer
Step 8: Install STANDALONE version of quicktime at:
http://www.apple.com/quicktime/download/standalone.html
Note: if you get an error on this page about an error occuring, just refresh. It should load. Also, there are TWO download options... one with itunes 7 and one without. You want the one without itunes.
Step 9: Restart computer
Step 10: Install itunes 7:
http://www.apple.com/itunes/download
Step 11: Restart computer
Step 12: Run itunes. You should be able to update and sync your ipod after this and no longer get that pesky 1417 error.
Also, after you have resolved the issue please see the bottom of the msconfig article for instructions on configuring windows to load your normal startup options again.

It seems like almost everybody is having this exact same problem. I bought a Nano for my wife and a iPod Photo for myself. Syncing does not work on either one and from what I read on these boards it doesn't work for most customers. Apple really needs to fix this soon.

Synchronous Send step showing errors in process designer

Hi All,
I have few questions in using a synchronous send step in
BPM.
Can I use a synchronous send step without opening Sync/async bridge.
When is the sync/async bridge opened?
Scenario:
File async --> XI (receive async) --> sync send step to J2ee application (HTTP post) --> async response send to File
Sync Abstract Interface:
Input:
Message type (same as outbound)
Response:
Message type (same as Http response)
When I use the synchronous step, I see errors in the process designer saying
Message to be sent and synchronous interface are not of the same type. This happens for both request and response message.
Please help me.
Regards,
Meher

I think the Problem is with the INTERFACE Determination.
You need a BPM for the above scenario, but not a Sync/Asynch Brindge
In BPM
Step 1 : Receive from File 1
Step 2 : Do Transformation from File1 format to J2EE Request Format
Step 3 : Send a Synchronous send Step to J2EE
Step 4 : Transform the HTTP response to your File2 Format Response
Step 5 : Send the Response to File2
Interface Determination
File1 to j2ee Request
J2ee Request/Response To J2EE Request/Response
J2ee Response to file 2
Please check your Interface determination very closely.

Create folders for other users

I have a process that automatically generates folders based on events in the database using Advanced Queues. This process will work if I am creating folders for the user I am currently connected as.
What I can't seem to do is use the system admin account to create folders in other users home folders. I get insufficient privilege errors when I use findPublicObject to return the users home directory. This seems to happen because the users home folder has a private ACL, it works if I make the home folder public but I don't really want to do that.
Does anyone have a solution for this?

Sure, here are two suggestions.
1. If you want to create the folders in response to the AQ messages, and you want to do so independently of your application's normal security policies, you can use the system admin user to perform the operations, as long as you enable administration mode. Use LibrarySession.setAdministrationMode(true) to do this. Security will be bypassed until you turn this mode off.
2. If you want to make the changes within the concept of your application security model, then modify the model so that your system admin user has access to everything that it needs to be able to update or delete. You can do this by modifying the ACLs on the objects in question.

Missing Adobe PCD and SLstore folders for Adobe Illustrator in Win7

I can't open my Adobe Illustrator and it says: Error 16.
Configuration-error. I only find the SLstore folders for Adobe PS,
but not for Illustrator CS6 ( 64bit). And the Adobe PCD is not there at all.
My system: Windows 7 Ultimate 64-bit SP1
I read somewere that you can also place a slstore folder in the right location.
Is that true?
Please help. Regards,

Benjamin1964 the SLCache and SLStore folders should be able to create themselves. Error 16 indicates there is a file permission error preventing the creation of the folders. You can find more details on how to correct this at Configuration error 16 | CC, CS.

CS5 Master Collection installs Application Folders for unselected apps

I elected to install only some of the applications from the CS5 Master Collection but the installation created several folders for apps I did not install.
These folders have the application in them BUT the application will not launch.
For example, I did NOT install "Premier Pro CS5" but there is a foler in Applications called "Adobe Premier Pro CS5". In this folder I see "Adobe Premiere Pro CS5.app". If I click on that I get the message:
"You can't open the application Adobe Premiere Pro CS5 because it may be damaged or incomplete."
Is this normal?
Why would folders and non-functioning apps be installed when they were specifically NOT excluded by me during the install process.
I'd like to fix this without messing up anything. There's no "unisntaller" in these situation.
Thanks!

I have exactly the same problem and situation with CS5 production premium.
I reinstalled after PC re-build and it won't update. The Manager actually downloads all the apps (tried several times now and it downloads the 512MB of files) and then says there was an error. If I click on the customer support link it takes me to a page on Adobe about serial number problems : http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html.
Suggests a serial number issue, but it is correct and the base product from discs installed and registered correctly.
Come on Adobe is this your way of forcing us to the cloud? How do we update products?

Create new folders for e-mail?

Is it possible to create folders for e-mail? Or does this sync with e-mail accounts? I use comcast.net and none of my folders show up on my iPhone. Any info. would be appreciated.

With an IMAP account only and Comcast provides POP account access only.
A POP account is designed to be accessed with a single email client only.
An IMAP account is designed to be accessed with an email client on multiple computers or devices with the ability to keep all server stored mailboxes synchronized with the server automatically with all email clients used to access the account, and the ability to create additional server stored mailboxes to sort/store received or sent messages by category which will also be kept synchronized with the server automatically with all email clients used to access the account.
With an IMAP account, you can also store sent messages on the server. Send a message with the iPhone's Mail client and the message will be available in the account's Sent mailbox automatically when checking the account with the email client used on your computer to access the account, and vice-versa.
This is not possible with a POP account.

Some subscribed folders missing in Thunderbird 24.5.0

i am new to Thunderbird and have just installed ver 24.5.0. I have checked through all of the folders and they are all subscribed to, yet a number of the subscribed folders are not showing. i have gone to the subscribe section and I can see that they have been subscribed to, so I unsubscibed and then re subscribed but that did not help. They remained missing.
When I open the same IMAP email address in Outlook 2010 I can see all of the folders and they show as subscribed.
I must have 200 folders and there are about 6 or 8 missing. Some have a tree of folders below them and some are simply a stand alone folder under the Inbox.
Under Synchronization & Storage I have the following enabled
Keep messages for this account on this computer is checked.
Synchronize all messages locally regardless of age is checked
Don't Delete any Messages is checked
Always keep starred messages in checked
As much as i would like to get away fro Outlook 2010 I cant have my messages and folders disappearing.
Help would be most appreciated.

Thanks Matt, none of the folder have any special character, and certainly no umlauts, some of the folders are
Namibia,
INQUIRIES
South Africa, and a whole tree of folders under this.
Rwanda, and a whole tree of folders under this
I did rename a few of them to make sure that there were no hidden characters, or blank spaces and that seemed to work randomly, but did not work through the board.

FlexBuilder not checking for errors in AS files

FlexBuilder 2 isn't finding any errors in AS files that
aren't explicitly referenced in an MXML file for anyone in my
office. This seems like a pretty basic function everyone needs, so
I can't imagine it's not a huge bug....
To be more specific, I have a flex project set up with two
files in the root named SimpleTest.as and test.mxml. If test.mxml
is empty, I can write absolutely anything into the .as file and
flex builder won't locate any errors in real time. As soon as I
instantiate an instance of SimpleTest in my mxml file, however,
flex builder suddenly reports all of the problems in the problems
view, and we're good to go.
This is a huge pain from a development standpoint - I don't
want to have to keep an instantiation of a class just to find if
there are any errors in it. And if I'm not able to find errors in
real/development time, FlexBuilder becomes a glorified text editor
with the only real useful AS feature being code hints.
If the project is an ActionScript project instead of a Flex
project, flex builder will detect errors on AS files if they're in
the root package, but files nested in folders aren't checked for
errors unless an instance of the class exists in another
root-package object.
Is there anything we can do to fix this? Is anyone else
seeing this error?
Thanks.

Sorry guys, but the way Flex ignores unreferenced .as files
is just plain wrong, and it's also inconsistent. There... thats the
synopsis of this post, now the explanation.
In our app, we want to have a list of menu items that are
read in from the database. Each item consists of the man-readable
text and the name of a class that is normally derived from
TextWindow. The user clicks on a menuitem and the window appears.
Flex provides the function flash.utils.getDefinitionByName()
which will return the class definition for the given class name
supplied as a string. But it will only work if the class is loaded
i.e it has been referenced somewhere. To get around this, I have
had to create my own map of class names to class definitions. In
other words, I've had to rewrite getDefinitionByName.
quote:
Well, it makes sense to me that the IDE should ignore a file
if you're not actually using it.
Yes, but what the IDE doesn't know is that you may want to
create an instance of the class
without referencing it directly. getDefintionByName is the
proof that there was/is some intention to be able to do that. IMO
this is a reasonable thing to want to do, e.g if functionality is
enabled/disabled according to user security, then one would expect
to be able to dynamically create classes at runtime.
getDefinitionByName() should allow me to do that. After all, the
function exists to begin with, so it should work. But it only
partially works because the IDE doesn't load up unreferenced .as
code.
If the .as file appears in the project, it should be
compiled. Period. The fact that it is not referenced should not
determine whether or not it is compiled. getDefinitionByName would
then work as I reasonably expected it to work and allow dynamic
creation of classes.
The
Inconsistency I mentioned earlier is therefore that Flex
offers the getDefinitionByName but renders it pretty useless as you
have to reference the class anyway.
Finally all the other development languages I have used will
compile all source in the project regardless of whether or not it
is referenced. This includes C++, C#.NET and Visual Basic. So Flex
is definitely the odd one out here.

Error while trying to retrieve text for error ORA-12154

Hello,
I try to install php 5.1.2 on a WIN2003 server and IIS6 with the OCi8 extension without success from several days.
On my server I've a 920 oracle client and the 10.1 instant client, I copy the tnsnames.ora in the instant client's directory.
I've declare many environnement variables :
- NLS_LANG : AMERICAN_AMERICA.WE8MSWIN1252
- TNS_ADMIN : E:\...\oracle\instantclient_10_1
- ORA_NLS33 : E:\..\oracle\920\ocommon\nls\ADMIN\DATA
With the php command line the oci_connect function correctly works : the php command line use the instant client's tnsnames.ora. I can query with success my database.
When I try to load a web php script (the same as the php command line script) I have the following error " Error while trying to retrieve text for error ORA-12154" ( oci_connect( $user , $pass, $sid ) . The $sid variable have the value of an alias declared in the tnsnames.ora.
If I replace the sid's alias by something like this " (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xx.xx.xx.xx)(PORT=1521)))(CONNECT_DATA=(SID=xx)" in the oci_connect function, I have another error : Error while trying to retrieve text for error ORA-12705.
A web page with the phpinfo function displays the following messages about oci8 extension : It seems to be correct.
oci8
OCI8 Support enabled
Revision $Revision: 1.269.2.8 $
Active Persistent Connections 0
Active Connections 0
Temporary Lob support enabled
Collections support enabled
Do you have any idea ? Thanks a lot

The web server is not seeing the Oracle environment correctly. You need to set PATH to the instant client libraries. ORA_NLS33 is not used for Oracle 10g clients. Perhaps you have some library conflict with two versions of Oracle on the machine?
These may help:
http://www.oracle.com/technology/tech/php/htdocs/php_troubleshooting_faq.html#envvars
http://blogs.oracle.com/opal/2006/05/01

History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.

wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account.

Java.sql.SQLException: Error while trying to retrieve text for error ORA-24

Hi All,
Am having serious problem with ORA-24327 and the behavior is very very unpredictable. I have couple of environment where the same error comes in different context. The recent one was surprising. I have describe bellow the environment configuration and the stack trace. The error which surprised me was when I use type � 3 driver while starting weblogic I get ORA �24327 but when I use Type �4 it starts properly. If you could kindly provide solution it would be great help. I would also appreciate if u can provide information which driver to use where performance is the major concern. I would also appreciate if u could provide feed-back from the industry about booth the driver. Apart from that I have couple have environment where it occurs when 10/12 user access simultaneously. All the open connection is closed in program properly still am getting the error.
Thanks in anticipation.
Cheers,
Tapas
Environment
OS - SunOS 5.8 Generic_108528-07 sun4u sparc SUNW,Ultra-Enterprise
JDK - Solaris VM (build Solaris_JDK_1.2.2_07, native threads, sunwjit)
Weblogic - 5.1.0 Service Pack 9 04/05/2001 14:59:53 #105983
Oracle � 8.1.6
Delaying 10 seconds before making a beuatpool pool connection.
Pool 1 (Type �3 )
weblogic.jdbc.connectionPool.beuatpool=\
url=jdbc:weblogic:oracle,\
driver=weblogic.jdbc.oci.Driver,\
loginDelaySecs=10,\
initialCapacity=10,\
maxCapacity=20,\
capacityIncrement=2,\
allowShrinking=true,\
shrinkPeriodMins=10,\
refreshMinutes=10,\
testTable=dual,\
props=user=xxx;password=xxx;server=xxxx
Pool 2(Type �4)
weblogic.jdbc.connectionPool.thinPool=\
url=jdbc:oracle:thin:@xxx:1521:xxx,\
driver=oracle.jdbc.driver.OracleDriver,\
loginDelaySecs=1,\
initialCapacity=1,\
maxCapacity=10,\
capacityIncrement=1,\
allowShrinking=true,\
shrinkPeriodMins=15,\
refreshMinutes=15,\
testTable=dual,\
props=user=xxx;password=xxx;server=xxx:1521:xxx
allow=everyone
---------- LOGIN ERROR CODE: 24327
java.sql.SQLException: Error while trying to retrieve text for error ORA-24327 �
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.sql.SQLException.<init>(SQLException.java:43)
at weblogic.db.oci.OciConnection.getLDAException(OciConnection.java:143)
at weblogic.jdbcbase.oci.Driver.connect(Driver.java:157)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:149)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:109)
at weblogic.common.internal.ResourceAllocator.makeResources(Compiled Cod
e)
at weblogic.common.internal.ResourceAllocator.<init>(Compiled Code)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:330)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(Compiled Code)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(Compiled Code)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java
:62)
---------- LOGIN ERROR CODE: 24327
---------- LOGIN ERROR CODE: 24327
Fri Aug 31 00:57:22 GMT-05:00 2001:<I> <JDBC Pool> Sleeping in createResource()
Fri Aug 31 00:57:23 GMT-05:00 2001:<E> <JDBC Pool> Failed to create connection p
ool "beuatpool"
weblogic.common.ResourceException: weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: Error while trying to retrieve text for error ORA-24327 -
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.sql.SQLException.<init>(SQLException.java:43)
at weblogic.db.oci.OciConnection.getLDAException(OciConnection.java:143)
at weblogic.jdbcbase.oci.Driver.connect(Driver.java:157)
at java.sql.DriverManager.getConnection(Compiled Code)
at java.sql.DriverManager.getConnection(DriverManager.java:137)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:172)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:109)
at weblogic.common.internal.ResourceAllocator.makeResources(Compiled Cod
e)
at weblogic.common.internal.ResourceAllocator.<init>(Compiled Code)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:330)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(Compiled Code)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(Compiled Code)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java
:62)
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at weblogic.common.ResourceException.<init>(ResourceException.java:18)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Con
nectionEnvFactory.java:182)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:109)
at weblogic.common.internal.ResourceAllocator.makeResources(Compiled Cod
e)
at weblogic.common.internal.ResourceAllocator.<init>(Compiled Code)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:330)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(Compiled Code)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(Compiled Code)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java
:62)
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at weblogic.common.ResourceException.<init>(ResourceException.java:18)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Con
nectionEnvFactory.java:125)
at weblogic.common.internal.ResourceAllocator.makeResources(Compiled Cod
e)
at weblogic.common.internal.ResourceAllocator.<init>(Compiled Code)
at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.j
ava:330)
at weblogic.jdbc.common.internal.JdbcInfo.initPools(Compiled Code)
at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
at weblogic.t3.srvr.StartupThread.doWork(Compiled Code)
at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java
:62)

Hi,
I guess you can try some of these:
- Make sure you're not missing an entry inside your tnsnames.ora file. Thin driver does not require the information inside that file, as opposed to Weblogic's OCI driver. If you are able to connect to the DB using a thin driver, then the problem is most probably (WL)driver-related.
- Make sure you've properly configured the DB user / password inside your weblogic.properties (config.xml if WL6+).
- Make sure you're able to access all drivers and classes required (PATH, CLASSPATH, etc...)
- Make sure the OCI driver version you are using is fully compatible with the Oracle (server) version you are pointing to.
- Try to access the DB user through some other client (for instance, SQLPlus*).
Hope this is of some help,
Freddy.

(Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?

We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB

Synchronizing subscribed folders for ... error

Similar Messages

Maybe you are looking for