Synchronous AS2 - MDN communication

Hello,
in our AS2 scenario (SAP Proxy Sender --> BPM --> AS2 Receiver) we request the MDN synchronously for error handling purposes, associating the message directly to the sender message and direct update of the sender system.
However problem is that obviously only asynchronous interfaces can be used to communicate with the AS2 adapter. So even though the MDN is requested synchronously (as http response) I cannot use a synchronous interface.
Has anyone of you used such a synchronous scenario? How did you overcome the problem that a synchronous interface obvisouly cannot be used?
Thank you for your update!

hello all,
Now i am facing the below error:
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. MDN requested, but AS2 Inbound Relation is missing. Missing inbound relation between AS2From: 'XXXX' and AS2To: 'YYYYY'., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. MDN requested, but AS2 Inbound Relation is missing. Missing inbound relation between AS2From: 'XXXXX' and AS2To: 'YYYYY'.
Eventhough i have maintained proper relation between Sender and recevier external party AS2ID.
Could you please help on this.

Similar Messages

AS2 Reciver Communication Channel error

Hi,
I am doing FILE to AS2 ...
I configured the Scenatio with Synchronous MDN , I have Created the Sender for MDN report too..
beow is my Error At AS2 reciver Communication Channel...
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DTREQUEST and DATABASE..
Thanks

Hi Tom,
This problem comes in SAP PI 7.1 version for resolving you require creation of extra configuration objects u2013
1. A sender AS2 communication channel with protocol as u201Ereports‟
2. A sender agreement using above communication channel.
For more information please refer Article (This will help you in configuring extra objects)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d095b2df-9fa3-2d10-568b-d12d99828c33?quicklink=index&overridelayout=true
Regards,
Vikrant

Sender AS2 MDN XML Channel error

Hi,
I am trying to configure a sender AS2 adapter to receive asynchronous MDN. But as soon as I create the channel ,it goes in error "Channel configuration is erroneous: java.nio.charset.UnsupportedCharsetException: The target charset iso885915 is not supported".
1. I don't see any other option to configure character set once AS2 MDN transport protocol is selected. Am I missing any configuration?
2. Also I am testing from mendelson and as per the mendelson log MDN is sent to PI system but I do not see any MDN in PI. We are using B2B addon SP1 on PI 7.11.
mendelson log :
[3:27:36 PM] mendelson_opensource_AS2-1407405456031-5@EDI_Partner_EDI_Partner: Outgoing MDN has not been signed.
[3:27:36 PM] mendelson_opensource_AS2-1407405456031-5@EDI_Partner_EDI_Partner: MDN created, state set to [processed].
[3:27:36 PM] mendelson_opensource_AS2-1407405456031-5@EDI_Partner_EDI_Partner: Sending async MDN to http://<PI_Host>:50000/AS2/AS2_Sender/mdn.
[3:27:36 PM] mendelson_opensource_AS2-1407405456031-5@EDI_Partner_EDI_Partner: Message sent successfully (HTTP 200); 791 Byte transfered in 353ms [2.19 KB/s].
[3:27:36 PM] 17ef0d18-1e19-11e4-c6b8-0000004bc76a@PI7: AS2 communication successful, payload 1 has been moved to "C:\Users\Pankaj\Desktop\mendelson\opensource\as2\messages\EDI_Partner\inbox\17ef0d18_1e19_11e4_c6b8_0000004bc76a@PI7".

Hi Pankaj,
This is what I did:
The most important parts of the configuration are
Receiver AS2 communication channel, requesting a synchronous MDN message
Sender AS2 communication channel processing the incoming MDN message
Receiver AS2 communication channel
Sender AS2 communication channel
Within the SAP PO monitoring tools, you see something like this:
Kind regards,
Dimitri

AS2 mdn on application acknowledgement

If I choose AS2 mdn on application acknowledgement, it has to be synchronous interface?
What structure is the MDN message?
I'm still stuck with the Wal-Mart AS2
Any help would be appreciated.
Thanks

Very helpful. Thanks a lots.
Archived AS2 message:
AS2 Message from Fri Feb 13 11:15:17 CST 2015
URL: 161.168.228.14
content-type: application/pkcs7-mime; smime-type=enveloped-data; name="smime.p7m"
host: 210.22.80.17:50000
ediint-features: multiple-attachments
receipt-delivery-option: http://gem.wal-mart.com:5080/
as2-version: 1.2
subject: EDIINTDATA
message-id: <20150212211516C0C688E1@146907777000001>
user-agent: Liaison Exchange Commerce Suite 3.5.2.1
from: GVBe2Bzy
date: Fri, 13 Feb 2015 03:15:16 GMT
disposition-notification-options: signed-receipt-protocol=optional,pkcs7-signature; signed-receipt-micalg=optional,sha1
as2-from: 146907777000001
disposition-notification-to: GVBe2Bzy
content-length: 2489
requesturl: http://210.22.80.17:50000/AS2/AS2AdapterFacade
content-disposition: inline; filename="smime.p7m"
remoteaddr: 161.168.228.14
as2-to: CC_AS2_SENDER_WALMART

Not able to generate AS2 MDN when receiving custom XML via AS2

Hi friends,
I have setup the trading partner and the corresponding TP certificate import for receiving the custom XML via AS2 channel.
I am receiving the custom xml properly to oracle b2b and able to receive the same to bpel as well. however in the oracle b2b console under reports tab i am seeing only one record for inbound document receive and i am not seeing the other record for the AS2 MDN going back to vendor. I have setup the AS2 channel under the external trading partner --> Channel using the vendor AS2 URL and selected all the security parameters while creating the Outbound AS2 channel.
1. Not able to generate AS2 MDN when receiving custom XML via AS2.
2. eventhough i am able to decrypt the inbound custom XML and ablr to recieve it in bpel also for processing, in the reports tab the inbound message state is changing to MSG_ERROR and it has the folloing error message:
Error Code
B2B-50037
Error Description
Machine Info: (***********) Description: B2B inbound message processing error
Error Level
ERROR_LEVEL_COLLABORATION
for AS2 MDN generation for custom XML receiving using As2 protocol, do we need to setup anything other than the outbound As2 Channel using the external vendor AS2 URL?
Can you please help me how can i generate the AS2 MDN for the inbound custom XML document i have received and also why the inbound message is failing even though i am receiving the custom XML properly to bpel?
Thanks,
Amirineni.

Hi Prasanna,
Vendor has enabled the ACK mode as SYNC.
Below are the headers for the inbound message to B2B. and we are able to receive the input message to bpel also.
Protocol Transport Binding
ChannelName=******** AS2-To=****AS2 TE=trailers, deflate, gzip, compress Date=Thu, 02 Oct 2014 14:26:31 GMT AS2-Version=1.2 Accept-Encoding=deflate, gzip, x-gzip, compress, x-compress AS2-From=****AS2 Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1 Disposition-Notification-To=https://******/as2 Message-ID=<CLEO-20141002_142630452-31X54N@****_*****AS2.pcwbedi1-O> Content-type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m Content-length=747006 MSG_RECEIVED_TIME=Thu Oct 02 10:26:39 EDT 2014 Subject=EDI ECID-Context=1.005175bK7U^AXNJCAnf9Cx0002pW000yjX;kXjE1ZDLIPGIj2QCYV8QoKSSILRO_PQT_IS Proxy-Client-IP=****** Recipient-Address=https://******/b2b/httpReceiver User-Agent=RPT-HTTPClient/0.3-3I (Windows 2003) X-Forwarded-For=****** Content-Disposition=attachment; filename="smime.p7m" Host=****** EDIINT-Features=CEM, multiple-attachments, AS2-Reliability Connection=Keep-Alive X-WebLogic-KeepAliveSecs=30 X-WebLogic-Force-JVMID=-1497702782 From=****** Mime-Version=1.0
Message Digest
Message Digest
Digest Algorithm
sha1
Transport Protocol
HTTP
Transport Protocol Version
1.0
Url
http://******
security
Transport Headers
ChannelName=****** AS2-To=******AS2 TE=trailers, deflate, gzip, compress Date=Thu, 02 Oct 2014 14:26:31 GMT AS2-Version=1.2 Accept-Encoding=deflate, gzip, x-gzip, compress, x-compress AS2-From=****AS2 Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1 Disposition-Notification-To=https://******/as2 Message-ID=<CLEO-20141002_142630452-31X54N@****AS2_*****AS2.pcwbedi1-O> Content-type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m Content-length=747006 MSG_RECEIVED_TIME=Thu Oct 02 10:26:39 EDT 2014 Subject=EDI ECID-Context=1.005175bK7U^AXNJCAnf9Cx0002pW000yjX;kXjE1ZDLIPGIj2QCYV8QoKSSILRO_PQT_IS Proxy-Client-IP=***** Recipient-Address=*******/b2b/httpReceiver User-Agent=RPT-HTTPClient/0.3-3I (Windows 2003) X-Forwarded-For=******* Content-Disposition=attachment; filename="smime.p7m" Host=***** EDIINT-Features=CEM, multiple-attachments, AS2-Reliability Connection=Keep-Alive X-WebLogic-KeepAliveSecs=30 X-WebLogic-Force-JVMID=-1497702782 From=***** Mime-Version=1.0
Thanks,
Amirineni

Timeout in synchronous SOAP-Proxy communication

Hi,
I have a synchronous SOAP-Proxy communication (3rd party - XI - ERP). 3rd party is always the initiator of the communication.
Is there a general rule about who should set a timeout? Does it should be set by a 3rd party, XI, or ERP? In our scenario it shouldn't be longer than 30 seconds.
If it needs to be set on SAP side, where it should be defined? On XI or on ERP, or on both systems?
Which SAP parameter is used for setting the timeout for synchronous communication that does not affect other already working ways of communication, like asynchronous.
Thanks for answers.
Janos

Hi,
The timeout property needs to be set at XI level. For SOAP sender timeout check sap note no. 856597 which reads as The default timeout value for synchronous calls is 5 minutes. You can increase this value by setting parameter XI.Timeout in the module parameter table of the SOAP adapter. The value must be given in milliseconds. For example, value 600000 represents the timeout value of 10 minutes. This parameter is not recognized in systems prior to SP13.
Thanks!

Correlating AS2 MDN to Original IDoc?

Hi All -
I have got the following scenario:
1) Backend system (ECC) sends IDoc to SAP PI.
2) SAP PI maps IDoc to EDIFACT message and sends via AS2 to B2B Partner.
3) B2B Partner sends back AS2 MDN to acknowledge receiving of AS2 message.
__Question:__
How can I now correlate the AS2 MDN to the original IDoc and so forward the acknowledgement to the Backend system?
I was thinking to use the 'Correlation ID' which is contained in the AS2 MDN and is the same ID as the original SAP PI message.
However, how do I practically retrieve the IDoc number (part of original IDoc message and used as identifier in the ECC system) from the persisted messages of SAP PI?
Can I code an ABAP or JAVA program which is than called within a mapping to query the persisted messages and give back the correlating IDoc number?
Are there other ways to achieve this?
Thanks for your inputs.
Best Regards, Mathias.

Hi Mathias,
Approach1:
I would definately not consider using BPM overhead on a high volume scenario. As the Output file(that will be generated) will be a simple XML message with just the data required for corelating with the MDN. All MDN's are expected to received within 1 min or less than 5 min.(B'cos it is a System level Acknowledgement), Hence if the BPM is not closed within the specified time period(1min or 5 min), raise an exception.
The Corelation file that will be generated can look like
<MDN_Corr>
   <SenderAS1ID>        --> Will be used for Corelating the MDN
   <ReceiverAS2ID>      --> Will be used for Corelating the MDN
   <TimeStamp>
   <IDOCNumber>
   <EDI_ISA_Control_No> --> Will be used for Corelating the MDN
   <EDI_Message_Type>
</MDN_Corr>
Approach2:
It might be very resource intensive to perform payload search. (and in some cases, the messages are archived, hence might result in bad search). Hence, you can have Z-Table all the fields as mentioned in the XML message. 1:1 mapping b/n EDI_ISA control number & IDOC_Number will be your lookup key-value params
-SM

Unable to identify the exchange protocol of the message (sync AS2 MDN)

Hi,
We got the following error:
Description: Unable to identify the exchange protocol of the message
StackTrace:
Error -: AIP-50080: Exchange protocol identification error
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1367)
     at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2370)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1813)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1152)
     at oracle.tip.adapter.b2b.xmlgwIntg.XMLGWIntegration.raiseOutboundMessage(XMLGWIntegration.java:168)
     at oracle.tip.adapter.b2b.xmlgwIntg.Outbound.onMessage(Outbound.java:297)
     at oracle.jms.AQjmsListenerWorker.dispatchOneMsg(AQjmsListenerWorker.java:316)
     at oracle.jms.AQjmsListenerWorker.run(AQjmsListenerWorker.java:129)
     at java.lang.Thread.run(Thread.java:534)
Here is the Wire message (sync MDN)
=======================
Message-ID=<23033756.391232032071968.JavaMail.SYSTEM@INUBITTEST>
Subject=Your ORDERS AS2
[email protected]
Content-Length=1347
MIME-Version=1.0
Server=Apache
Date=Thu, 15 Jan 2009 15:07:52 GMT
Content-Type=multipart/mixed;      boundary="----=_Part_53998_23619909.1232032071968"
[email protected]
------=_Part_53998_23619909.1232032071968
Content-Type: text/plain; charset=UTF-8; name=test.txt
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename=test.txt
Message-ID: <17080722.371232032071906.JavaMail.SYSTEM@INUBITTEST>
MIME-Version: 1.0
Content-Type: multipart/report; report-type=disposition-notification;
     boundary="----=_Part_53997_14786767.1232032071906"
AS2-Version: 1.1
AS2-From: test_AS2
AS2-To: as2me
------=_Part_53997_14786767.1232032071906
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
MDN for Message ID: <33156:4:0:137@as2me>
From: as2me
To: test_AS2
Received on: Thu, 15 Jan 2009 16:07:51 +0100
Status: processed
Comment: This is not a guarantee that the message has
been completely processed or unterstood.
------=_Part_53997_14786767.1232032071906
Content-Type: message/disposition-notification
Content-Transfer-Encoding: 7bit
Reporting-UA: inubit Integration Server
Original-Recipient: rfc822; test_AS2
Final-Recipient: rfc822; test_AS2
Original-Message-ID: <33156:4:0:137@as2me>
Disposition: automatic-action/MDN-sent-automatically; processed
Received-Content-MIC: 5kFOLMXOUurpm6DUTA8IMRj5gcs=, sha1
------=_Part_53997_14786767.1232032071906--
------=_Part_53998_23619909.1232032071968--
============================
The communication with our TP is going well, we are able to send, receive messages over AS2 and send back MDN, but we are not able
to receive their MDN.
Edit:
It seems that after the latest MLR patch, the error changed to [IPT_HttpSendError] HTTP encounters send error :. Premature EOF encounter but the roots seem to lead to the problem with MDN as B2B is sending the message a couple of times now and gives the mentioned EOF error.
Please advise,
Thank you
Edited by: Kamil Zadora on Jan 30, 2009 3:44 AM

Hi Ramesh,
Yes, agreement uses AS2 IDentifiers. Incoming messages are recognized correctly, and we send back sync MDN that is correctly received by our TP. They also recieve our messages correctly although Oracle B2B does not recognize the MDN from them. I think that this causes that, now after applying the latest MLR patch, B2B tries to send it around 6 times and gives the Unexpected EOF error.
Thank you for your help in advance,
Kind regards,

Can I handle the outgoing AS2 MDN in a sync fashion ?

... before they are returned to the partner using the same http connection ?
As per the guide, it tells me there is no subscription to the messagebox. I need to capture the outgoing sync mdn before it is sent to the partner (connected to a request-response port), pretty much as we are doing so today with the outgoing async mdns.
Fabrikam will send us a message, the receive pipeline will validate, I need to handle the mdn resolution just before it goes back throught the as2 send pipeline. Is this possible ?

Hi René,
Not tried it personally but I hope you can. I am not sure whether you can edit the disposition. But handle it like access it context properties etc.
Give it a go..
In case of synchronous mode, the MDN will
generated by the AS2 Decoder in the AS2Receive receive pipeline. You will get
MDN message (if enabled) as well as payload message
after the disassemble stage. Here (may be in party resolution stage) you can create a custom pipeline component to handle the MDN as per your requirement. At this stage you will have both the
MDN and AS2 message-payload, so you have to differentiate whether it’s a MDN or payload by the following code:
if (!(bool)inmsg.Context.Read("IsAS2PayloadMessage", "http://schemas.microsoft.com/BizTalk/2006/as2-properties"))
//Then this is a MDN not a AS2-Payload message
//Handle the MDN here..
Once the MDN has been generated (after you handle it), AS2 Encoder of AS2 Send pipeline
acts as a passthrough pipeline and route the MDN.
Refer
this BizTalk Hotrod magazine and check the “Custom Pipeline Component for Promoting Properties” section where the
author handle the payload where as in your case you have to handle the MDN.
Regards,
M.R.ASHWINPRABHU
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Missing file name while receiving AS2 MDN acknowledgement

We are using BizTalk 2010.
We send one AS2 package to our TP and our TP send us back 4 Acknowledgement files.
Most of the acknowledgement files that we receive from the TP contains the ReceivedFileName property which contains the file name, except for the 1st acknowledgement or the MDN, which doesnt contain the file name.
Our TP has informed us that they do send us the MDN with a file name.
In our BizTalk 2010 system :
- We have a One-way receive port, which monitors all the content received from TP.
- We have defined a CustomPipeline for all inbound AS2 packages (AS2Receive pipeline). In this custom pipeline, in the Execute method, I had looked at all the properties from the base message context. I was not able to find ReceivedFileName, PreservedFileName,
AS2PayloadContentType properties. I also looked at the InBoundHttpHeaders and couldnt find the file name in there.
I heard that BizTalk 2010 has fixed this issue. Where can I find what was fixed? I had looked at the following links, but it didnt help:
http://geekswithblogs.net/VishnuTiwariBlog/archive/2010/10/14/as2-integration-between-seeburger-bis-6.0-and-biztalk-server-2009.aspx
http://www.postseek.com/meta/60dd56c855adc621edd20d64f0b106d5
Is there any other place, I could look for the file name?
And what could be reason that, the system is able to retain the file name for all the other acknowledgement, but for Ack1/MDN?
Or is there a way to look at the raw content with the header send by my TP? (tried using Fiddler / Wireshark)
Or is there a way to prove, that I indeed not receive any file name?
Thanks for your help.
Thanks and Regards, Vikram

Hi VNSuvarna,
>>I heard that BizTalk 2010 has fixed this issue. Where can I find what was fixed?
Here are a series of cumulative update package 6 for BizTalk Server 2010, please check which is available for you. Check out https://support.microsoft.com/en-us/kb/2855367?wa=wsignin1.0 for further information.
>> Or is there a way to look at the raw content with the header send by my TP? (tried using Fiddler / Wireshark)
You can also use Fiddler, it captures HTTP(S) traffic and logs it for the user to review.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

AS2: MDN is not forwarded to PI (Integration Server)

Hello,
we still have some problems with the AS2 receiver configuration. FInally the AS2 message is sent out with request for synchronous MDN.
We receive the MDN and it shows up in the seeburger message monitor (MDN: Payload state ok, correlation successful).
However we want to forward the MDN to the Integration Server and checked therefore the flag "Handle received MDN - Refer MDN to XI system".
I also configured the sender MDN channel and the sender agreement accordingly.
However I do not see anything in SXMB_MONI , there is no error message either. So obviously the MDN is not forwarded as expected.
Have you ever had similar problems? Any other settings I could check?
Thank you for your advice!

Make sure that you have created an AS2 Sender channel with Message Protocol Reports.
Without checking this option, can you receive the sync MDNs in Seeburger Monitor?
Regards,
Prateek

AS2 MDN Structure - Details

Hi all,
I have an scenario IDOC->PI->AS2. when we send to the Partner via AS2 they sent us back a Synchronous MDN, but we don't process it yet.
I want to build an interface to process the MDN for bussiness to check if the Invoice they sent was received succesfully on partner side.
My question is:
Which information come into the MDN XML? i just identify the below fields in the message monitor of Seeburger:
Type                           sync
MDN Message ID        <xxxx@xxxx>
Partner ID                    xxxxx
Payload State             ok
Payload State Details <empty>
MDN Timestamp         09/01/2011 00:00:26
MDN Sigend
Own ID                       XXXXX
The MDN Message ID is not the same we use for the invoice, so we cant match the messages.
I want to build something like this:
Associate the Invoice# with the AS2 Message ID or PI Message ID in a table, then with the information received in the MDN complete the match, and give a "Received by partner" status to the invoice.
Maybe the MDN contains more information to complete that match.
Please help.
Regards.

Hi Israel Toledo,
Just wanted to check with if you were able to figure out this?
Regards,
BRV.

Error in AS2 reciever Communication channel

Hi all,
We are working on Idoc to AS2 scenario using SAP PI 7.1. we have installed the certificates provided by the AS2 partner on the PI system and used them in the Reciever agreement. When trying to test this interface, we are getting the following error in AS2 communication channel:
Message-Verarbeitung fehlgeschlagen. Grund: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ediint.edi.EDIMessageException: EDI message composing failed: signature generation failed: signature generation failed: java.security.NoSuchProviderException: provider BC not found., SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: com.seeburger.ediint.edi.EDIMessageException: EDI message composing failed: signature generation failed: signature generation failed: java.security.NoSuchProviderException: provider BC not found.
Can anyone please help us in resolving this?
Regards
Jagruthi

Hi Jagruti,
I am also looking for the same scenarios with Receiver AS2 adapter on PI 7.1
I have noticed that in my AS2 receiver adaper i am not getting AS2 server details instead the conf is different from previous AS2 adapter.
I am getting below options
channel attribute for RTP
Scurity attribute for RTP etc.
can u pls help me whether anything is missing in deployment why I am not getting other optins.
can u also share any conf doc which u hav
chirag

How to set Reporting-UA for AS2 MDN ?

I notice that the MDN that the B2B sends out looks like this : Reporting-UA:abc.com
How can I set the abc.com to a different value ?

Hi,
I am not very sure but this should be the name of one of the servers in communication. You may like to check your configuration (specially TP Identifier, Exchange, transport, document protocol and tip.prop) to find that where exactly this value has been mentioned.
Let us know the result please.
Regards,
Anuj
Edited by: Anuj Dwivedi, Infosys on Aug 8, 2009 3:34 PM

How can we resend AS2 MDN messages back to TP when initial try failed.

Hi,
We would like to auto retry a failed AS MDN messages back to our TP. We are connected with AS2 and at the channel level we set the retry interval and retry count, but it seems still the MDN is not retried automatically when initial try failed for any reason.
Appreciate your help.
Thanks,
Levey

I have and iPhone 6 and have been receiving the same error message. I have done all the trouble shooting possible, and still receive the message. Are there any other suggestions? Thank you kindly!

Synchronous AS2 - MDN communication

Similar Messages

Maybe you are looking for