Synchronous & asynchronous ---- very urgent
Could any one answer my question.What is the difference between 1.Asynchronous and synchronous process.
2.Asynchronous and synchronous database update.
3. Asynchronous and synchronous method
Thanks & Regards
sai
Asynchronous Update The program does not wait for the work process to finish the update. Commit Work.
Synchronous Update The program wait for the work process to finish the update. Commit Work and Wait.
Check this link for more details.
http://fuller.mit.edu/tech/sync_asynchronous.html
Regards,
Maha
Similar Messages
-
Personnel Data Iview Error (It's very Urgent)
Hi All,
Personal Data
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
failed to create or init instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN' in scope APPLICATION_SCOPE with instanceId 'null'
Caused by: com.sap.tc.webdynpro.progmodel.model.api.WDModelException: failed to create instance of model 'com.sap.xss.hr.per.in.pdata.model.HRXSS_PER_P0002_IN'
at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getNewModelInstance(WDModelFactory.java:392)
at com.sap.tc.webdynpro.progmodel.model.api.WDModelFactory.getOrCreateModelInstanceFromScopeMaintainer(WDModelFactory.java:329)
... 65 more
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: no jcoMetadata found for RFC function 'HRXSS_PER_GET_F4_P0002_IN'! Please verify, that your model is consistent with the ABAP backend: 'EC6'.
Hi Please help me to solve this error it's very urgent ?
thanks and regards,
Phanikumar.Hi Ashutosh Gulkhobre,
I coppied the dump from the ST22.
Now please tell me solution fro this error ?
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception CX_SY_REF_IS_INITIAL
Date and Time 27.06.2007 09:54:55
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it
has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component.
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
"SAPLHRXSS_PER_MAC" or "LHRXSS_PER_MACU04"
"HRXSS_PER_CLEANUP"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"HRXSS_PER_CLEANUP" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "ptgsap10"
Network address...... "192.168.1.18"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x Intel 80686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "PTGSAP10"
Database type..... "ORACLE"
Database name..... "EC6"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 29 2006 00:18:21"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.1.0) "
Patch level. 75
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 2090448
Heap.... 0
Page.... 0
MM Used. 1208256
MM Free. 880672
User and Transaction
Client.............. 001
User................ "ESS_USER1"
Language Key........ "E"
Transaction......... " "
Program............. "SAPLHRXSS_PER_MAC"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 645
Kernel Release...... 700
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........." "
Function Module..... "HRXSS_PER_CLEANUP"
Call Destination.... "ptgsap10_EC6_10"
Source Server....... "EPSAND1"
Source IP Address... "192.168.1.36"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in
"HRXSS_PER_CLEANUP".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 13
of the (Include) program "LHRXSS_PER_MACU04".
The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLHRXSS_PER_MAC "; its source code begins in
line
1 of the (Include program "LHRXSS_PER_MACU04 ".
Source Code Extract
Line SourceCde
1 FUNCTION hrxss_per_cleanup.
2 *"----
3 ""Local interface:
4 *" EXPORTING
5 *" VALUE(MESSAGES) TYPE BAPIRETTAB
6 *"----
7
8 * CALL METHOD mac_adapter->cleanup
9 * IMPORTING
10 * messages = messages.
11
12 * TRY.
>>>>> CALL METHOD xss_adapter->cleanup
14 .
15 * CATCH CX_HRPA_VIOLATED_ASSERTION .
16 * ENDTRY.
17 IF NOT xss_adapter2 IS INITIAL.
18 CALL METHOD xss_adapter2->cleanup.
19 ENDIF.
20
21 ENDFUNCTION.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 2
SY-TABIX 13
SY-DBCNT 30
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20070627
SY-UZEIT 095455
SY-XPROG SAPLHRXSS_PER_MAC
SY-XFORM HRXSS_PER_CLEANUP
Active Calls/Events
No. Ty. Program Include Line
Name
4 FUNCTION SAPLHRXSS_PER_MAC LHRXSS_PER_MACU04 13
HRXSS_PER_CLEANUP
3 FORM SAPLHRXSS_PER_MAC LHRXSS_PER_MACU04 1
HRXSS_PER_CLEANUP
2 FORM SAPMSSY1 SAPMSSY1 85
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 4 Ty. FUNCTION
Name HRXSS_PER_CLEANUP
MESSAGES
Table[initial]
SY-XFORM
HRXSS_PER_CLEANUP
455555545544444552222222222222
82833F052F3C51E500000000000000
000000000000000000000000000000
000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
XSS_ADAPTER2
F0000000
F0000000
No. 3 Ty. FORM
Name HRXSS_PER_CLEANUP
SYST-REPID
SAPLHRXSS_PER_MAC
5454455555545544422222222222222222222222
310C82833F052FD1300000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_%_MESSAGES
Table[initial]
No. 2 Ty. FORM
Name REMOTE_FUNCTION_CALL
%_DUMMY$$
2222
0000
0000
0000
SY-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SYST-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
HEADER
000000000000
000000000000
TYPE
3
0000
3000
SY-XPROG
SAPLHRXSS_PER_MAC
5454455555545544422222222222222222222222
310C82833F052FD1300000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RC
0
0000
0000
SY-XFORM
HRXSS_PER_CLEANUP
455555545544444552222222222222
82833F052F3C51E500000000000000
000000000000000000000000000000
000000000000000000000000000000
%_SPACE
2
0
0
0
No. 1 Ty. MODULE (PBO)
Name %_RFC_START
%_PRINT
000 0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RFCTYPE_INTERNAL
3
0000
3000
Internal notes
The termination was triggered in function "method_call_iref"
of the SAP kernel, in line 2203 of the module
"//bas/700_REL/src/krn/runt/abmethod.c#7".
The internal operation just processed is "METH".
Internal mode was started at 20070627095455.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=24080)
When : 6/27/2007 9:54:55.565
Threads : 2
Computer Name : PTGSAP10
User Name : SAPServiceEC6
Number of Processors: 2
Processor Type: x86 Family 6 Model 11 Stepping 1
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 6cd0
eax=000a7358 ebx=00000464 ecx=00000248 edx=00000000 esi=00000464 edi=00000000
eip=7c82ed54 esp=0549c640 ebp=0549c6b0 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:0549c640=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:27f2ac53=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0549c6b0 77e6ba12 00000464 0001d4c0 00000000 0549c6e8 ntdll!KiFastSystemCallRet
0549c6c4 0101f939 00000464 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
0549c6e8 005641c2 005641fb 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess [ntstcdbg.c (501)]
0549c6ec 005641fb 7c38b5c8 7c38b5c8 7c38b5c8 01d87888 disp+work!NTStack [dptstack.c (1367)]
0549c708 0056422f 7c38b5c8 00000000 0085f2b9 7c38b5c8 disp+work!CTrcStack2 [dptstack.c (352)]
0549c714 0085f2b9 7c38b5c8 00000000 005f0059 00300030 disp+work!CTrcStack [dptstack.c (182)]
0549c738 008626fb 3ccf0c10 00008006 00000000 00660bd8 disp+work!rabax_CStackSave [abrabax.c (7020)
0549cfe0 0067f9fc 01285324 012852e4 0000089b 2054de20 disp+work!ab_rabax [abrabax.c (1243)]
0549d010 006914a8 00000003 3cda5308 00000000 0549d078 disp+work!method_call_iref [abmethod.c (2203
0549d078 007c8d1e 00000000 3cda5308 0549d1c4 3cda67e8 disp+work!ab_extri [abextri.c (552)]
0549d08c 008433d6 00000000 3cda6768 0059fdb0 3cda64b4 disp+work!ab_xevent [abrunt1.c (281)]
0549d098 0059fdb0 3cda64b4 00000008 3cda6768 00000000 disp+work!ab_dstep [abdynpro.c (491)]
0549d1c4 005a2ae2 3cda5308 3cda5308 0549fd04 005a2654 disp+work!dynpmcal [dymainstp.c (2394)]
0549d1d4 005a2654 3cda5308 3cda5308 00000003 0549fd04 disp+work!dynppbo0 [dymainstp.c (542)]
0549d1f0 00577116 3cda5308 00000004 00000000 0000001a disp+work!dynprctl [dymainstp.c (359)]
0549fd04 004741c6 0000001a 00000001 00000001 0049792f disp+work!dynpen00 [dymain.c (1464)]
0549fd14 0049792f 00000004 00000000 00000003 00000002 disp+work!Thdynpen00 [thxxhead.c (4683)]
0549fee0 00497ead 00000001 00000000 00000000 00430000 disp+work!TskhLoop [thxxhead.c (4395)]
0549ff00 004214f1 00000000 00000000 7ffd5000 0549ff60 disp+work!ThStart [thxxhead.c (1153)]
0549ff14 00401080 00000003 056368d8 00000001 00000000 disp+work!DpMain [dpxxdisp.c (1119)]
0549ff60 011bf720 00000003 056368d8 056378c8 01c05000 disp+work!nlsui_main [thxxanf.c (82)]
0549ffc0 77e523cd 00000000 00000000 7ffd5000 80938fd6 disp+work!wmainCRTStartup [crtexe.c (395)]
0549fff0 00000000 011bf5dd 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 6408
eax=00000001 ebx=00000103 ecx=0770fee8 edx=7c82ed54 esi=00000000 edi=00000000
eip=7c82ed54 esp=0770fec0 ebp=0770ff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:0770fec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:2a19e4d3=????????
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
0770ff04 0110e0b7 000006e0 00000000 00000000 059ca9d8 ntdll!KiFastSystemCallRet
0770ff84 7c349565 00000000 00000000 00000000 0563a508 disp+work!SigIMsgFunc [signt.c (594)]
0770ffb8 77e66063 0563a508 00000000 00000000 0563a508 MSVCR71!endthreadex
0770ffec 00000000 7c3494f6 0563a508 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Index Typ Program Group Date Time Size Lang.
0 Prg SAPMSSY1 0 11.04.2005 09:27:15 21504 E
1 Prg SAPLHRXSS_SER_AUTHORITHY_CHECK 1 13.02.2005 19:00:30 16384 E
2 Prg SAPLASTAT_TRIG 2 09.09.2004 14:18:33 13312 E
3 Typ ASTAT_TYP2 0 10.11.1998 05:35:18 2048
4 Typ ASTAT_TYP1 0 30.11.1998 15:54:16 2048
5 Prg SAPLSAUTHTRACE 5 07.03.2005 08:51:05 57344 E
6 Typ USOBHASH 0 02.07.2003 13:15:24 3072
7 Prg SAPLSECH 7 05.07.2005 13:10:18 26624 E
8 Typ CVERS 0 09.11.2000 14:05:49 2048
9 Prg SAPLHRXSS_PER_MAC 9 10.02.2004 14:21:15 49152 E
10 Prg CX_SY_REF_IS_INITIAL==========CP 10 05.07.2005 13:10:16 10240 E
11 Typ SCX_SRCPOS 0 18.05.2004 14:07:11 2048
12 Prg CX_DYNAMIC_CHECK==============CP 12 05.07.2005 13:10:16 10240 E
13 Prg CX_ROOT=======================CP 13 05.07.2005 13:10:16 11264 E
14 Prg CX_NO_CHECK===================CP 14 05.07.2005 13:10:16 10240 E
15 Prg CX_SY_NO_HANDLER==============CP 15 05.07.2005 13:10:16 10240 E
16 Typ SYST 0 09.09.2004 14:18:12 31744
Directory of Application Tables
Name Date Time Lngth
Val.
Program SAPMSSY1
SYST . . : : 00004612
\0\0\0\0\x000D\0\x000F\0\0\0\0\0\0\0\0\0\0\0\0\0\x001E\0\0
ABAP Control Blocks (CONT)
Index Name Fl PAR0 PAR1 PAR2 PAR3 PAR4 PAR5 PAR6 Source Code Line
246 FUNC 03 0020 LHRXSS_PER_MACU03 1
247 PAR2 02 0000 001B C000 LHRXSS_PER_MACU03 1
249 FUNC 13 0003 LHRXSS_PER_MACU03 1
250 PAR2 01 0000 0011 C001 LHRXSS_PER_MACU03 1
252 FUNC FF 0000 LHRXSS_PER_MACU03 1
253 ENDF 00 0000 LHRXSS_PER_MACU03 1
254 -
00 0000 LHRXSS_PER_MACU03 1
255 STCK 02 C001 LHRXSS_PER_MACU03 1
256 CPOP 00 0000 LHRXSS_PER_MACU03 1
257 -
00 0000 LHRXSS_PER_MACU03 1
258 FUNP 3E 0000 0011 8000 0000 8000 0000 0000 LHRXSS_PER_MACU04 1
262 FUNP 80 0000 0000 0000 0000 0000 0000 0000 LHRXSS_PER_MACU04 1
>>>>> METH 03 0000 0000 8006 0000 0000 0000 0000 LHRXSS_PER_MACU04 13
270 PAR2 00 0000 0001 0000 LHRXSS_PER_MACU04 13
272 CMPS 20 024B 001B 001B LHRXSS_PER_MACU04 17
274 BRAF 05 0007 LHRXSS_PER_MACU04 17
275 METH 03 0000 0001 8006 0000 0000 0000 0000 LHRXSS_PER_MACU04 18
279 PAR2 00 0000 0001 0000 LHRXSS_PER_MACU04 18
281 FUNE 00 0000 LHRXSS_PER_MACU04 21
282 -
00 0000 LHRXSS_PER_MACU04 21
Thanks and Regards,
Phanikumar -
Error while opening a module. plz help me, very urgent.
when i try to open a module, the following error message appears on my screen.
" no j2ee component found in d:\krisp\programs\servlets".
i've installed bea in c: drive and my servlet program is in d: drive.
plz help me, it's very urgent.Can you provide some more information? What were you doing when this happened?
Can you post the entire error message?
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/ -
Need help, MMC tree got deleted, very urgent.
Hi,
My sap MMC tree, got deleted in the server. I have been trying to restore since 2 days and couldnt succeed, please help me.
1) i have uncared the sapmmc.sar from Kernal\NT\I386\MMC\sapmmc.sar file
2) i got about 7 files, in which there is one sapmmc file i have tried to double click it, n check but no go.
3) i also tried to run the Sapstartsrv.exe file and fill in up the values in pop up window. & filled up the following values :-
SID: DEV
NR: 00
StartProfile: (entire start profile path given)
user: devadm
passwd; (given)
- but it says "the account name is invalid or does not exist or the password is invalid for account name specified"/
- no go in both the cases.
Please need help very urgent.
Regards,
Satish.siva,
I am getting same error since 2 days
SID: DEV
NR: 00
Start Profile: (entire start profile path)
User: <hostname>/devadm
passwd: ****
Error:
cannot install service
create service failed:421
The account name is invalid or doesnot exist, or the passwd is invalid for the account name specified.
Edited by: satish c on Jun 4, 2008 11:12 AM -
How to write code for this logic in a routine, very urgent --help me
hi all,
i want to apply this logic into one subroutin ZABC.
here i m giving my logic ,can any body help me in coding for this, this is very urgent, i hv to submit on wednesday.
4.1 Read the company code number BSEG-BUKRS from document line item.
4.2 Fetch PRDHA from MARA into GV_PRDHA where MATNR = BSEG-MATNR.
4.3 Fetch Business area (GSBER) from ZFIBU into GV_GSBER where (PRDHA = GV_PRDHA and BUKRS = BSEG-BUKRS) OR (PRDHA = GV_PRDHA and BUKRS = SPACE).
4.4 If business area match is found, go to step 3.9. Else continue.
4.5 If BKPF-BLART IN set ZVS_POSDT OR BKPF-XBLNR starts with I0*, execute steps below. Else, go to Step 3.6.
i. MOVE: BSEG-BKURS TO work area field WA_ZFIBUE-BUKRS,
BSEG-MATNR TO work area field WA_ZFIBUE-MATNR,
GV_PRDHA TO work area field WA_ZFIBUE-PRDHA,
BSEG-HKONT TO work area field WA_ZFIBUE-HKONT,
BSEG-GSBER TO work area field WA_ZFIBUE-GSBER,
BSEG-PSWBT TO work area field WA_ZFIBUE-PSWBT,
BKPF-BUDAT TO work area field WA_ZFIBUE-BUDAT,
SY-DATUM TO work area field WA_ZFIBUE-CREDATE,
SY-UZEIT TO work area field WA_ZFIBUE-CRETIME,
Fetch running serial number (WA_ZFIBUE-SERIALNO) from ZFICO. This number will be stored in ZFICO with PARAMTYPE = "BPM030307", SUBTYPE = "ZFIBUE" and KEY1 = "SERIALNO". The actual serial number will be stored in the field VALUE1.
i. Insert WA_ZFIBUE INTO ZFIBUE.
ii. Send email notification to the user (if it is not already sent to user on the same posting date).
Use function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail.
Fetch email address and date of last email from ZFICO. These values will be stored in ZFICO with PARAMTYPE = "BPM030307", SUBTYPE = "EMAIL" and KEY1 = "<USERNAME>". The email address will be stored in the field VALUE1 and posting date in VALUE2. Once mail is sent, VALUE2 is updated with latest posting date (BKPF-BUDAT).
iii. Increment the running serial number and update ZFICO with new serial number.
a. GV_ SERIALNO = WA_ZFIBUE-SERIALNO + 1
b. Update ZFICO Set value1 = GV_SERIALNO
Where PARAMTYPE = "BPM030307" AND
SUBTYPE = "ZFIBUE" AND
KEY1 = "SERIALNO".
iv Move VDFT to BSEG-GSBER.
v. Exit routine.
4.6 Fetch MTART into GV_MTART from MARA where MATNR = BSEG-MATNR.
4.7 If SY-BATCH = INITIAL AND GV_MTART <> ROH, issue the error message - Maintain the mapping of product hierarchy <PRDHA> from article <MATNR> for <BUKRS>. Else, go to step 3.8.
4.8 If SY-BATCH <> INITIAL AND GV_MTART <> ROH, issue the error message - Maintain product hierarchy on article master. Go to step 3.10.
4.9 Move GV_GSBER TO BSEG-GSBER.
4.10 Exit Routine
plz give me reply asap --this is very urgent
thanks in advance
swathiHi Swathi,
If it's very very urgent then you better get on with it, don't waste time on the web. Chop chop. -
Update Routine ... Help me Please--VERY URGENT
Hi All ,
I Moving data from Cube to ODS . Let me explain abt the records in the cube .
There are 6 key figures in the cube as well as dimensions, UNIQKEY TRANSACTION is One Dimension and ARTICLE is another dimension which is having an Navigational attribute called CORE ELEMENT.
I am showing the data with those two dimension and the key figures which are to be used in the routine.
Charc----
Key Figures
UNIQKEY-ARTICLE-Coreelement--
billqty
in base unit
A00N----1006330--1--
10.5
A00M -
1006320----2--
2.5
A00P-----1006330--1--
10.5
A00P-----1006320--2--
2.5
A00Q-----1006320--2--
2.5
A00Q-----1006340--3--
10.5
Now Lets see what the core element numbers mean,
core element 1 means -- fuel .
Core elemnet other 1 -- food .
I need to move these data into ODS Which will have an extra field called No of items in the transaction --ITEMS.For this i need to write a routine .
The Logic is ...
1.if Materail is of type 1(Means if the core element - 1)
I need to Populate the No of items in tnx = 1 .--ITEMS.
2.If Material is of type(Means if the core element)2or 3 I need to populate the billing quantity to the no of transcations.--ITEMS
3. If the Uniqkey tanscation contains two line items as suppose that you have 20 litres of fuel and 2 cans of coke, then No of Items in the transaction should be 3 and Billing Quantity in BUoM 22
billing quantity in BUoM = 20 litres for the first line item and 2 for the second line item...
then as the first line item is fuel, field No OF Items in the Transcation should be 1 (replacing the 20) + 2 = 3
so the final result in the ODS should be billing quantity in BUoM = 22 and The Items in the Transcation= 3
So the ODS Data should look like this.
UNIQKEY--billqty--
ITEMS
in base unit
A00N--10.5--
1
A00M--2.5--
2.5
A00P--13--
3.5
A00Q--13--
12.5
NOTE : IN the ODS only the UNIQKEY IS THE KEY FIELD and the rest are DATA FIELDS.
I Posted this one before also. But didnt get proper responses.
I am Pasting the piece of code which I have written . This code will work for the first two records in the cube , But it is failing for the UNIQKEY Transcation having Line items.
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BI0/PMATERIAL.
DATA: TITEMS LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS,
CORE_ELEMENT like /BI0/PMATERIAL-RPA_WGH1.
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CS8ZPOCTUS04
RECORD_NO LIKE SY-TABIX
RECORD_ALL LIKE SY-TABIX
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS
RETURNCODE LIKE SY-SUBRC "Do not use!
ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
check not COMM_STRUCTURE-material is initial.
select SINGLE RPA_WGH1
INTO CORE_ELEMENT
from /BI0/PMATERIAL
where
material = COMM_STRUCTURE-material
and OBJVERS <>'D'.
IF CORE_ELEMENT EQ '1'.
TITEMS = '1'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = titems
IMPORTING
OUTPUT = titems
ELSE.
TITEMS = COMM_STRUCTURE-BILL_QTY.
ENDIF.
result value of the routine
RESULT = TITEMS..
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
PLease give me ideas on how to acheive this . As I am not Aware of ABAP very well.. PLease try to give me the code. I hope one of you may got the same requirement before.
Its very urgent and I need to deliver it today itself.
Thanks in advance , you can mail me to [email protected]. If anybody intersted to discuss this Issue they can reach at +91 9845922955.Hi ,
While I am moving the data from cube to ods . I need to create the update rules with cube -- 8cube . WHen i am doing this the billqty is a key figure in cube so that is not a problem but the ITEMS is not there in the cube ,SO for that I need to write a routine to populate that one.
Its strange but the user what to analyse with the UNIQKEY transaction. And these objects will be added as navigational attributes to the Characteristic. as it acts as another dimension.
He wants to laod these from ODS to Master data -Characteristic.
to say for each transcation hpw many items are getting sold.
Message was edited by: Nagarjuna Reddy
ONce again thanks for the qucik replies
Message was edited by: Nagarjuna Reddy -
UPDATE ROUTINE --- CUBE --- ODS Very Very URGENT
Hi Collegues/Friends ,
First I need to thank for the intiators of this site , as I came to know that for many
problems we will get different best solutions ... Hoping the same I am posting a question
which is very very very urgent as the client is running after me for this .
My Requirement is as Follows. ..
I Moving the data from Cube to ODS . While i need to write a routine for an extra field in
ODS based on Billing Quantity in Base Unit of Measure . The Key Field in the ODS Is UNIQKEY
Transaction and It is a Characterstic in the Cube and we have MAterial as another
Characteristic and core element as navigational attribute .
In the Cube for every UNIQKEY transaction- there are more than One line items.
My data fields in the ODS are Billing Quantity in Base Unit of MEasure and and EXTRA FIELD
: No of Items in Transaction . But the thing is that I have only Billing Quantity in Base
Unit of Measure in cube as a key figure
BAsing on the UNIQKEY transcation and Billing Quantity In Base Unit Of Measure I need to
populate the No of Items in Transaction... For this i need to write a routine .
Let suppose say that for the Materials the core elements are as follows
Material Core element
10 1 -- fuel -- In liters
20 2 -- Cigar - in PAck
30 3 -- Coke - in Cans
Now Lets see how the records are there in InfoCUbe
Uniqkey / Material / Core element /Billin Quantiy
A / 10 / 1 / 22
B / 30 / 3 / 2
C / 10 / 1 / 15
C / 30 / 3 / 2
D / 20 / 2 / 10
D / 30 / 3 / 2
And IN the ODS -- I need to Populate the No OF items in Transaction.
the Logic behind this as follows .
1.if Materail is of type 1(Mean if the core element - 1)
I need to Populate the No of items in tnx = 1
2.If Material id of type 2 or 3 I need to populate the billing quantity to the no of
transcations.
3. If the Uniqkey tanscation contains two line items as suppose that you have 20 litres of
fuel and 2 cans of coke, then No of Items in the transaction should be 3 and Billing
Quantity in BUoM 22
billing quantity in BUoM = 20 litres for the first line item and 2 for the second line
item...
then as the first line item is fuel, field No OF Items in the Transcation should be 1
(replacing the 20) + 2 = 3
so the final result in the ODS should be billing quantity in BUoM = 22 and The Items in the
Transcation = 3
For this I have Written a Rouinte like this for that field
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BI0/PMATERIAL.
DATA: TITEMS LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS,
CORE_ELEMENT like /BI0/PMATERIAL-RPA_WGH1.
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CS8ZPOCTUS04
RECORD_NO LIKE SY-TABIX
RECORD_ALL LIKE SY-TABIX
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS
RETURNCODE LIKE SY-SUBRC "Do not use!
ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
check not COMM_STRUCTURE-material is initial.
select SINGLE RPA_WGH1
INTO CORE_ELEMENT
from /BI0/PMATERIAL
where
material = COMM_STRUCTURE-material
and OBJVERS <>'D'.
IF CORE_ELEMENT EQ '1'.
TITEMS = '1'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = titems
IMPORTING
OUTPUT = titems
ELSE.
TITEMS = COMM_STRUCTURE-BILL_QTY.
ENDIF.
result value of the routine
RESULT = TITEMS..
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
Does it satisfy all the conditions ?? mentioned above if . As far As i know as the only key
field in the transcation it will satisfy the first two conditions .
I want to know or If possioble anybody pls take some pain for me to send the code or any
Ideas for satisfying all the conditions.
Hope I will get immediate replies....
Mail me to [email protected]Reddy,
Please do not post in all sections ... makes it hard to follow up on posts..
Arun -
Open items for purchase order its very urgent
hi
my requirement is to write extract program for purchase order(me21) to extract only open items.
please provide sample code its very urgent.
thanks in advance.
points will be rewarded.
thanks
hari prasad reddycheck the below report :
REPORT ZMM_OPEN_PO_REPORT no standard page heading
line-size 255
message-id zwave.
======================================================================
Program Name : ZMM_OPEN_PO_REPORT *
Description : This report displays all Open PO Items and output *
would be PO Number,Material number and so on *
Author : Seshu *
Date : 01/24/2007 *
MODIFICATION HISTORY *
DATE | AUTHOR | CHANGE # | DESCRIPTION OF MODIFICATION *
--|||--
01/24/07| Seshu | DEVK921979 | Initial *
D A T A D E C L A R A T I O N P A R T ***
type-pools
type-pools : slis.
Tables
tables : ekko, " Purchase order Header
ekpo, " Purchase order Item
marc. " Material with Plant data
Internal table for output.
data : begin of i_output occurs 0,
ebeln like ekko-ebeln,
matnr like ekpo-matnr,
end of i_output.
ALV Data declaration.
data : v_repid like sy-repid.
ALV Function Module Variables
DATA: gs_layout type slis_layout_alv,
g_exit_caused_by_caller,
gs_exit_caused_by_user type slis_exit_by_user.
DATA: gt_fieldcat type slis_t_fieldcat_alv,
gs_print type slis_print_alv,
gt_events type slis_t_event,
gt_list_top_of_page type slis_t_listheader,
g_status_set type slis_formname value 'PF_STATUS_SET',
g_user_command type slis_formname value 'USER_COMMAND',
g_top_of_page type slis_formname value 'TOP_OF_PAGE',
g_top_of_list type slis_formname value 'TOP_OF_LIST',
g_end_of_list type slis_formname value 'END_OF_LIST',
g_variant LIKE disvariant,
g_save(1) TYPE c,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
g_exit(1) TYPE c,
gx_variant LIKE disvariant.
data : gr_layout_bck type slis_layout_alv.
Ranges
ranges r_eindt for eket-eindt.
initialization.
v_repid = sy-repid.
start-of-selection.
Get the data from EKKO ,EKPO and MARC Table
perform get_data_tables.
end-of-selection.
display the data in the form of ALV
perform display_data.
*& Form get_data_tables
Get the data from EKKO,EKPO and MARC Table
FORM get_data_tables.
clear : i_output.
refresh : i_output.
fill the dates in ranges
r_eindt-low = sy-datum - 7.
r_eindt-high = sy-datum + 14.
r_eindt-option = 'BT'.
r_eindt-sign = 'I'.
append r_eindt.
Get the data from EKKO,EKPO and EKET Tables
select aebeln bmatnr into table i_output
from ekko as a inner join
ekpo as b on aebeln = bebeln
inner join marc as c on cmatnr = bmatnr
inner join mara as d on dmatnr = bmatnr
inner join eket as e on eebeln = aebeln
and eebelp = bebelp
where c~beskz = 'E'
and c~werks = '1000'
and d~mtart = 'FERT'
and b~loekz = space
and b~elikz = space
and e~eindt in r_eindt.
if sy-subrc ne 0.
message e000(zwave) with 'No open purchase order found'.
endif.
ENDFORM. " get_data_tables
*& Form display_data
text
FORM display_data.
Fill the Fiedlcat
PERFORM fieldcat_init using gt_fieldcat[].
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = g_user_command
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = gr_layout_bck
IT_FIELDCAT = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = g_save
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = i_output
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display_data
*& Form fieldcat_init
text
-->P_GT_FIELDCAT[] text
FORM fieldcat_init USING e01_lt_fieldcat type slis_t_fieldcat_alv.
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
Purchase order number
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'EBELN'.
LS_FIELDCAT-ref_fieldname = 'EBELN'.
LS_FIELDCAT-ref_tabname = 'EKKO'.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Purchase Order'.
ls_fieldcat-seltext_M = 'Purchase Order'.
ls_fieldcat-seltext_S = 'Purchase Order'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material #
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MATNR'.
LS_FIELDCAT-ref_fieldname = 'MATNR'.
LS_FIELDCAT-ref_tabname = 'EKPO'.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Material'.
ls_fieldcat-seltext_M = 'Material'.
ls_fieldcat-seltext_S = 'Material'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
ENDFORM. " fieldcat_init -
Communication b/w SAP and VB .exe file - Very urgent.
hi,
I am currently in a project implementing SAP for a cement manufacturing company. Here we have a VB .exe file which takes parameters and return values. now we need to connect this to application to SAP R/3 to pass data to that application and access the data from that .exe file.
Note: we don't have any source code for that vb .exe file its a third party software.
Its an very urgent one....
please guide me how to do it with all steps.
Any material please pass to [email protected]
Thanks in advance.form grosswt .
refresh itab3.
clear itab3.
Executing VB EXE file to get the weight from weigh bridge
call function 'WS_EXECUTE'
exporting
DOCUMENT = ' '
CD = ' '
COMMANDLINE = ' '
inform = 'X'
cd = 'C:\SAPWEI'
program = 'C:\sapwei\MyVB.exe'
STAT = ' '
WINID = ' '
OSMAC_SCRIPT = ' '
OSMAC_CREATOR = ' '
WIN16_EXT = ' '
EXEC_RC = ' '
IMPORTING
RBUFF =
EXCEPTIONS
FRONTEND_ERROR = 1
NO_BATCH = 2
PROG_NOT_FOUND = 3
ILLEGAL_OPTION = 4
GUI_REFUSE_EXECUTE = 5
OTHERS = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Fetching Value from VB text file
call function 'WS_UPLOAD'
exporting
CODEPAGE = ' '
filename = 'C:\sapwei\w1.txt'
FILETYPE = 'ASC'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
tables
data_tab = itab3
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at itab3.
v1 = itab3-num.
pgrwt = v1.
endloop.
message 'Save Gross Weight' type 'S'.
endform. " grosswt -
Manula Clearing of GR/IR a/cs -- very urgent
HI peers
How to do manual clearing of GR/IR a/cs. Plz explain me in detail how to do it. Also let me know the T.Code to clear it. Very Urgent.
Regards
RajaramHi,
U will clearning of GR/IR account to use t.code f.13. if you clearning same account for grouping u use t.code f.19
then will solve your problem
regards
cvsreddy -
VERY URGENT!! How to Pass a "% " symbol from form to Report
Hi
I am using oracle 10g and passing a symbol "%" as a parameter to the report from a form. But it shows error as follows:
REP-52006: Failed to decode the specified URL PARAMETER1=%.
But it is working when it runs in the Report directly.
Then Why we can't pass the symbol "%" to the report from form.
Please reply me as soon as possible. IT IS VERY URGENT !!Hi,
Try using a lexical parameter(&parm_1) for a string of values or a bind parameter(:parm_1) for a single value
Thanks,
Kimosabe -
CAN ANY BODY EXPLAIN THESE QUESTIONS, VERY URGENT
WHAT IS THE USE OF CHAPTER ID, IN CHAPTER ID RATES WILL BE DETERMINES.
HOW MANY TAX CODES NEED CST, LST.
WHERE CAN I SEE EXCISE REGISTER
WHAT IS MEANT BY RG1 CAN ANY BODY EXPLAIN BRIEFLY, WHAT IS THE USE OF RG1
HOW DO I GET OPENING BALANCE FOR EVERY MONTH.
IN DEPOT SALES, IF CREATING EXCISE INVOICE A CERTIFICATED WILL ISSUE, IN A CERTIFICATE WHICH FIELDS WILL BE THERE.
WHAT IS MEANT BY JURISDICTION CODE & COUNTY CODE.
IN SD FACTORY SALES WHICH A/C ENTERIES GENERATED.
CAN ANY BODY EXPLAIN THESE FORMS, WHICH SITUATION THESE FORMS WE ARE USING. I NEED VERY URGENT.
a) A form
b) D form
c) C form
d) H form
e) DDP form
f) TR6 form
g) D3 form.
H) ARE.
I) ARE 1
j) ARE 2
IN DEPOT SALES PRICING PROCEDURE JFACT, WHICH CONDITION TYPES WILL COME,
IN FACTORY SALES PRICING PROCEDURE JFACT, WHICH CONDITION TYPES WILL COME
NOW WHAT IS THE VAT TAX.
what is the use of common distribution channel and common divisions
PLS FORWARD ANSWERS TO THIS MAIL ID.
i hope that definitely people will help
thanks every body.Dear vara prasad
You can take it for granted if you post so much questions in one thread like this, nobody will answer / clarify you.
So please make one thread per question.
Meanwhile, just I would like to clarify for few questions
1) The most important feature of chapter id is that based on this chapter id which you maintain in "Excise Tax Rate", all your excise tax rates will be flowing into your sale order / billing
2) If the rate of tax differs, then you need to maintain a separate tax code. For example, the LST / VAT in some state is 4%, and in some state it is 12%. So in this case, you need to maintain two tax codes
thanks
G. Lakshmipathi -
Excise Duty Value in Export Invoice - Very Urgent
Hi Gurus,
I have created a Export delivery & Billing Documents. I am trying to create Excise Invoice in which Excise Duty values are coming as "0". We are using TAXINN Procedure , ECC 6.0
Is there any specific note or any customization required for this ?
Due to this ARE1 is also giving "0" values & subsequent "0" value in Bond Register.
Can anybody help me on this ? It is very urgent.
Thanks in advance
VikasHi Vikas,
Could you help yaar ...if you got solution for it ..I am facing same problem..We are going live very soon,
help of ur's could help me lot ..My mail id [email protected]
Thanks in advanec in for your help.
regards,
Vijay Khochare -
Searching for the fields of a table(very very urgent)
Hi all,
i am in graet trouble now.i am searching for the fields like
1)country of origin where the finished good is created.
2) customer sales order number
3)customer sales order line number
i am writing a report for delivery order.in this report i have to refer customer PO & customer SO .
i mean, my company has a customer ( seagate) & seagate has a customer (let maxtor).initially maxtor will give a PO to seagate then seagate will raise a SO againest maxtor.
Then seagate will send PO number(of maxtor), PO line number,SO number(seagate), SO line number(seagate) to our company.
Then i have to write a report for sales order & delivery order.in these reports i have to refer seagate PO number & seagate SO number for reference.
i got PO number as vbkd-bstkd but not getting any field for reference Sales order.plz advice me on this. it is very very urgent.
ur idea is highly appreaciated.
Thank u very much.
Regards
pabitracheck out tables VBAK(sales order header), VBAP(sales items)
-
How to write code for this logic, plz help me very urgent
Hi All,
i am new to sap-abap, i got this work and i m working on this can any body help me in writing code, plz help me, this is very very urgent.
here i m giving my logic, can anybody send me the code related to this logic.
this is very urgent .
this program o/p should be in ALV format and need to create one commond 'SAVE" on this o/t list if user clicks save processedon and processedby fields in ZFIBUE should be updated automatically.
i am creating one custom table zfibue having fields: (serialno, bukrs, matnr,prdha,hkont,gsber,wrbtr,budat, credate, cretime,processed, processedon, processedby,mapped)
fields of zfibue:
serailno = numc
bukrs = char
matnr = char
prdha = char
hkont = char
gsber = char
wrbtr = char
budat = date
credate = date
cretime = time
processed= char
processedon = date
processedby = char
mapped = char are belongs to above type data types
and seelct-optionfields: s_bukrs for bseg-bukrs
s_hkont for bseg-hkont,
s_budat for bkpf-budat,
s_processed for zfibue-processed,
s_processedon for zfibue-processedon,
s_mapped. for zfibue-mapped
parameters: p_chk1 as checkbox,
p_chk2 as checkbox.
p_filepath type rlgrap-filename.
1.1 Validate the user inputs (S_BUKRS and S_HKONT) against respective check tables (T001 and SKB1). If the validation fails, provide respective error message. Eg: Invalid input for Company Code.
1.2 Fetch SERIALNO, BUKRS, MATNR, PRDHA, HKONT, GSBER, WRBTR, BUDAT, CREDATE, CRETIME, PROCESSED, PROCESSEDON, PROCESSEDBY, MAPPED from table ZFIBUE into internal table GT_ZFIBUE where BUKRS IN S_BUKRS, HKONT IN S_HKONT, BUDAT IN S_BUDAT, PROCESSED IN S_PROCESSED, PROCESSEDON IN S_PROCESSEDON, and MAPPED IN S_MAPPED.
1.3 If P_CHK2 = X, go to step 1.11. Else continue.
1.4 If P_CHK1 = X, continue. Else go to step 1.9
1.5 Fetch MATNR, PRDHA from MARA into GT_MARA for all entries in GT_ZFIBUE where MATNR = GT_ZFIBUE-MATNR.
1.6 Sort and delete adjacent duplicates from GT_MARA based on MATNR.
1.7 Loop through GT_ZFIBUE where PRDHA = blank.
Read Table GT_MARA based on MATNR = GT_ZFIBUE-MATNR.
IF sy-subrc = 0.
Move GT_MARA-PRDHA to GT_ZFIBUE-PRDHA.
Modify Table GT_ZFIBUE. Update Product Hierarchy
Endif.
Fetch PRDHA, GSBER from ZFIBU into GT_ZFIBU for all entries in GT_ZFIBUE where PRDHA = GT_ZFIBUE-PRDHA.
Read Table GT_ZFIBU based on PRDHA = GT_ZFIBUE-PRDHA.
IF sy-subrc = 0.
Move GT_ZFIBU-GSBER to GT_ZFIBUE-GSBER.
Move X to GT_ZFIBUE-MAPPED.
Modify Table GT_ZFIBUE.
Endif.
Endloop.
1.8 Modify database table ZFIBUE from GT_ZFIBUE.
1.9 Fill the field catalog table GT_FIELDCAT using the details of output fields listed in section Inputs/Outputs (above).
Eg: LWA_ FIELDCAT -SELTEXT_L = 'Serial Number.
LWA_ FIELDCAT -DATATYPE = NUMC.
LWA_ FIELDCAT -OUTPUTLEN = 9.
LWA_ FIELDCAT -TABNAME = 'GT_ZFIBUE'.
LWA_ FIELDCAT-FIELDNAME = 'SERIALNO'.
Append LWA_FIELDCAT to GT_FIELDCAT
Note: a) The output field GT_ZFIBUE-PROCESSED will be editable marking INPUT = X in field catalog (GT_FIELDCAT).
b) The standard ALV functionality will be used to give the user option for selecting all or blocks of entries at a time.
c) The PF-STATUS STANDARD_FULLSCREEN from function group SLVC_FULLSCREEN will be copied to the program and modified to include a SAVE button.
1.10 Call the function module REUSE_ALV_GRID_DISPLAY passing output table GT_ZFIBUE and field catalog GT_FIELDCAT. Additional parameters like I_CALLBACK_PF_STATUS_SET (= ZFIBUESTAT) and I_CALLBACK_USER_COMMAND (=HANDLE_USER_ACTION) will also be passed to handle user events. Go to 2.14.
1.11 Download the file to P_FILEPATH using function module GUI_DOWNLOAD passing GT_ZFIBUE.
1.12 Exit Program.
Logic to be implemented in routine Handle_User_Action
This routine will have the following interface:
FORM Handle_User_Action USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
ENDFORM.
Following logic will be implemented in this routine:
1. If r_ucomm = SAVE, continue. Else exit.
2. Loop through GT_ZFIBUE where SEL_ROW = X. Row is selected
a. IF GT_ZFIBUE-PROCESSED = X.
i. GT_ZFIBUE-PROCESSEDON = SY-DATUM.
ii. GT_ZFIBUE-PROCESSEDBY = SY-UNAME.
iii. MODIFY ZFIBUE FROM work area GT_ZFIBUE.
Endif.
Endloop.Hi Swathi,
If it's very very urgent then you better get on with it, don't waste time on the web. Chop chop.
Maybe you are looking for
-
Is this an issue with my battery or something else?
I'm aware that my battery isn't going to stay perfect forever and that over time the life of your battery will decrease but since researching about it on the Apple website and learning about Cycle counts I'm wondering if my issues are related to my b
-
Looking for an insert statement to insert into a table around 500 rows
Hi Gurus, Your help is greatly appreciated !!, I need to have a query to insert into the mer_spec_feature table with the following , Please sugesst apart from the Utl_file ,input thing as the data is differnt in the regions and am lokking if it work
-
Windows 7 64bit Office 2010 64bit and Captivate v5.5
I am due to have a new PC with Windows 7 64bit and Office 2010 64bit. I am running Captivate v5.5. Does anyone know if I am going to run into any problems with the above PC spec when working with Captivate v5.5? Thanks in advance, Noel
-
SimpleDateFormat Easy Question..
I can't get SimpleDateFormat to work, I get this exception: Unparseable date: "Sat Jun 15 20:23:23 CDT 2002" Here's the code: System.out.println(new SimpleDateFormat("yyyy-MM-dd").parse(new java.util.Date().toString()));What's wrong? When I was looki
-
I have a sunbox that's all set up and ready to be used as an intranet server except for one small feature...I need a few things to start running automatically when the computer is booted up and logged in (Specifically: Apache, PHP and MySQL which are