Synchronous message mapping - access to originating request message?

Say you have a synchronous message - like a SOAP web service request - and you map it to an RFC call, is there any way for the message mapping from the RFC response message to the SOAP response message to access fields from the original SOAP request message? Or even just a temporary storage area that I could store values from the originating request message?

Hi Jonathon!
First of all, why not access the original soap request message inside the RFC..you will be receiving this data in your RFC...is the RFC is standard, maybe you can make a wrapper with a Z RFC of your own to store the original data and use it later to build the RFC response.
Another idea: you could call a RFC via JCO inside a UDF in mapping.. this RFC could write some data in XI business system during the request mapping and another call to a "reading" RFC could read that data in the response mapping.
Other idea: use BPM, you can use containers to store the request SOAP message, call synchronously the RFC and then use a transform step (mapping) to use the original request SOAP message and the RFC response message to "merge"/build the response for the SOAP.
Regards,
Matias.
PD: please give points if useful.

Similar Messages

Parameterized Message Mapping (RFCLookup) test in ESB message behaviour

Hi Gurus,
I am using parameterized message mapping using RFCLookup function
In the TEST tab of the mapping, I've provided my test xml instance message and inputted the Message Mapping Parameter (MMP) value with the RFC Receiver Communication Channel I am using,
looking at the Trace level in the editor, the source field value was put to the RFC as the import parameter, but the mapping fails with error that the RFC returned my defined exception (no POnumber available for MaterialNumber) --> which is not the expected result because in the ERP backend there is an existing PO for the material. I tested the RFC in the backend ERP itself and it is performing ok, with a PO number returned for the material (testing in SE37)
I checked on the Comm Channel and my message is being passed to the RFC adapter, but up to this point only:
RfcAdapter received a synchronous message. Trying to send sRFC for Z_RFC_NAME.
RfcAdapter received a synchronous message. Trying to send sRFC for PIREPUSER.
I have created the Binding for the Operation Mapping.
Would any of you have an idea on what is missing or what is wrong?
P.S. my RFC has a defined exception in it, but currently I am not using it in the RFCLookup mapping (unchecked "Use Exception" checkbox)

Hi All,
Solved the issue by passing the complete length of input parameter as defined in my RFC, e.g. input param in RFC is TYPE to a 12 char field, and the input parameter value being passed by the IDoc is only 6 chars.
In this case i used formatNumber function to put leading zeroes to complete the input parameter length
sourceField -->formatNumber --> RFCLookup --> targetField
Weird behaviour though is that even if my message is successfully received in the receiving system, the RFC CommChannel that my RFCLookup is using is still only showing this:
2010-12-01 23:14:32 Information RfcAdapter received a synchronous message. Trying to send sRFC for Z_FM_NAME.
2010-12-01 23:14:32 Information RfcAdapter received a synchronous message. Trying to send sRFC for J2EE_GUEST.
Why isn't the whole request response of the RFC captured by the RFC adapter? (e.g. MDT has status DLVG, DLV...)

Handling/Mapping a SOAP response message back to the RFC request Message

Hi
I was wondering if you could kindly offer some advice on how to handle the SOAP response back to an RFC in a RFC>SOAP>RFC.Response scenario. When executing an RFC function module that triggers a message to XI, the outbound message seems to process successfully, however, there is an error in the response message. I am not sure how to map the response back to the function module response message because it looks like the response payload is empty. It is also strange that the interface seems to run in synchronous mode despite being configured as an asynchronous interface. If it ran in asynchronous mode, there would not be a problem because we actually do not need a response back. The interface also runs perfectly when executing it from the Runtime Workbench, and it also runs in asynchronous mode as it should.
I would really appreciate any suggestions on how to solve this problem.
Thank you,
Brendon

Hi Reyaz,
This is actually an RFC-->SOAP scenario where the message structure of the source and target systems are different. We don't actually need a reponse back from the SOAP system. I was wondering if you perhaps know how we can cancel the Response response back to the requestor or at leaset map the SOAP response back?
The interface runs perfectly in asynchronous mode when executing it from the Runtime Workbench in the test section, but it runs in synchronous mode for some reason when executing the RFC function call in SAP.
Thank you,
Brendon

How to use result of message mapping as source to another message mapping

Hi.
I need to map iDoc to MT_A (MessageType) using MessageMapping.
And then using the result of the above mapping, map MT_A to MT_B using JavaMapping.
Can I do this all at once in my scenario or what is the best way to do this?
Regards,
Hjortur

Hi,
chk this:
/people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
Ur flow will be something like this under operation mapping :
1) Graphical mapping( iDoc to MT_A)
2) Java mappinmg.(MT_A to MT_B)
Thanks
Amit

Accessing the original message body in Error handler

Hello everybody,
The loanGatewy3 proxy service in the OSB tutorial uses a stage in the request pipeline for validation. If a validation error occurs the error handler reports the original body message using a reporting action.
Now if an error happens inside the Routing node; and if an error handler is defined to report the original message ($body), the reporting action will report the error message not the original message. It seems that the $body variable contains the erroneous response instead of the original message. So is there a way to access the original request $body inside a node error handler?
Best regards,
Tarek

you can always put the original message into a dummy variable $origMessage, then in the event of an error report on $origMessage not $body
cheers
James

Message mapping response error

Hi..All,
i am doing RFC-SOAP scenario, in request message mapping i am giving the values at sender side executed, i am getting the fields at target side, in resonse message mapping giving the all fields at sender side,i executed , but in target side not getting any fields, pls suggest me.
****for helpful answers i will give points***********
thanks in advance,
Pasi

Hi
when you do the RFC to SOAP scenario then you have to craete the two message mapping
one mapping will be b/w both the request messages
and other mapping will be b/w the response messages.
in the interface mapping you select the request message mapping in the request tab and response message mapping in the response tab.
both the message interfaces outbound as well as inbound interface of the synchronous type.
if u still face the problem please reply me back
Thanks
Rinku

Message Mapping - External Definitions

My Scenario
1) File1(Request with Employee Number) - Sent to XI (Async)
2) XI will send the Request over HTTP and will Receive the Response(Employee Details) (Synchronous)
3) The HTTP Response will be sent to File2(Employee Details) (Async)
The Request and Responses are XSD Messages. I have Imported them into External Definition in my Repository.
Created a File Request - Abstract - Asynchronous - Message interface
Created a HTTP Request-Response - Abstract - Synch - Message interface
Created a File Response - Abstract - Asynchronous - Message interface
Message Mapping: (I am stuck here)
I need to Map the File Request to HTTP Request
I need to Map the HTTP Response to File2Response
How can I creat the Message Mapping for the above situation?
Thanks.

Hi,
You will need to create the following message mapping:
1. File Request - HTTP Request
2. HTTP Response - File Response
you can map Message Types to External Definitions and vice versa.
They should appear in the list for the relevant software component.
Or am I missimng something here ?
Cheers
colin.

Monitering the Message Mapping

Hi all,<br>
I want to see the message payload exactly before the mapping and exactly after mapping (through sap GUI or RWB). <br>
We are encrypting on target side so i need to see the target structure before encryption.

Hi Raghu,
There are two ways you can monitor your messages......
Go to SXMB_MONI (for BPM go SXMB_MONI_BPE)+ select the message +double click. There above u can see two/three messages...
Original XML message(thats the request message ) and
Response message....or acknowledgement message with a ID.....
Click any message and below u can see all details like Receiver Identification, Interface determination, inbound message or request message as an XML payload
<b>Workbench</b>:
Go to RWB
Select Message Monitoring
In Messages from Components - > under Adapter Engine
Click Start. You will be able to see the message before mapping under payload
for after mapping
Go to RWB
Select Message Monitoring. In Messages - > Integration Engine
here u can see all the detalis...
Regards
Biplab

Message Mapping Vs Interface Mapping

What are the differences between Message Mapping and Interface Mapping?

Hi,
Message mapping
1) Transformation from one message structure to another message structure
2) Message Mapping is nothing but a set of rules for producing target XML from the source XML according to business requirement.These rules are nothing but relations between the source XML tags and target XML tags
3) 4 types(graphical, java, xslt, abap) mapping
4) You can check whether a complete message mapping functions at runtime once you have described it, by using the Test tab page.
Interface mapping
1) Interface mapping registers a pair of interfaces for a scenario and specifies the message mapping to be used
2) you can execute multiple mapping programs consecutively
3) To check whether an interface mapping that you have defined functions at runtime, test the interface mapping on the Test tab page.
Limitations
1) value mapping table cannot be accessed here
2) runtime constants of the mapping runtime are not set,but set to dummy values.
differences
message mapping you declare how the source message will be mapped to the the target message.
What source field will be mapped to the target field and any conditions for it to happen.
interface mapping you define what interfaces that will be communicating with each other. You will also see what message mapping the interfaces are using to exchange data. You need to do the message mapping before you do the interface mapping to get it correct.
Other releated things
->I think there can be Interface mappings without any Message mappings. This will work properly if both the source and target interfaces are of same type.
There might be less sense in these scenarios but they cannot be ruled out. They can help at times.
Interface mappings register your mapping program for an interface pair in the Integration Repository. If you require a mapping at runtime, it is sufficient to select the interface mapping for the interface pair at configuration time.
->The Integration Server uses the interface mapping to identify associated mapping programs for request messages, response messages, fault messages, or all three.
You can also create multiple interface mappings for the same interface pair.
For Multi MAppings Refer
http://help.sap.com/saphelp_erp2005vp/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/frameset.htm
Please reward points if it helps
Thanks
Vikranth

Data &message types,message interface, interface&message mapping

hi
I am very new to XI, i want to know about
1) Data Types
2)Message Types
3)message interface
4) interface mapping
5)message mapping
i am totally confused with eachother, can you please give me the clear definitions for these things
regards
pradeep

Hi Pradeep,
A data type is a basic unit for defining the structure of the data for a message type and, as a result, for the message to be exchanged
->A data type is a basic unit for defining the structure of the data for a message type and, as a result, for the message to be exchanged.
A data type is an XML Schema Definition (XSD). This definition determines how the valid payload of a message will look. Data types in XML schema are only an abstract description of a structure that you can assign to elements in an XML schema definition. A message type or a fault message type that references a data type determines the name of the root element of a message.
Ref link
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
2)Message Types
A message type comprises a data type that describes the structure of a message. At the following points in SAP Exchange Infrastructure you can refer to the message to be exchanged at runtime by using the message type:
· More than one message interface can use the same message type. For example, an asynchronous outbound message interface and an asynchronous inbound message interface can reference the same message type because the request message does not need to be mapped.
· When defining a message mapping you can directly reference message types to map messages from an outbound interface to messages from a receiver interface.
3)message interface
You use a message interface to describe a platform-independent or programming-language-independent interface, which you want to use to exchange messages between application components using SAP Exchange Infrastructure.
4) interface mapping
Interface mappings register your mapping program for an interface pair in the Integration Repository.
5)message mapping
A message mapping refers to a mapping of messages and is supported by a graphical mapping editor. The editor enables you to design a structure mapping between any two XML structures and connect to a value mapping.
Follow these Ref Link for all answers...
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Regards,
Ramesh.

Activation error in message mapping

Hi,
while activating Message mapping i am getting the error like this.
how to get rid of this error?
error:
Activation of the change list canceled Check result for Message Mapping MM_XXXXXX | http://www.xyerxd.com/mm
Imported source message has invalid reference IDoc
DEBMAS.DEBMAS06 | urn:sap-com:document:sap:idoc:messages
Imported target message has invalid reference Message Type MT_Receiver | http://www.xyerxd.com/mm

hi
Hope you are using the inactive versions of message/Idoc types for mapping.
First activate the message/Idoc types used in the message mapping.
Then open the message mapping, from the menu choose refresh.
Complete the mapping and test.
Now do the activation.
rgds,
Arun

Send Alerts(e-mail) for errors in SXMB_MONI(message mapping exceptions)

Good afternoon !
        I´m configuring SAP Netweaver PI 7.0(SP13) to use Alert Framework to send Alerts when errors occurs in the interfaces processing.
        I just achieved configure to send alerts when errors ocurrs in the Adapter Framework but, I can´t configure correctly to send alerts when errors ocurred only in SXMB_MONI(for example, message mapping exception in asyncronous interface).
        I just followed the instructions at Michal Krawczyk
weblog(/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step) and, initially, this was not sufficient to start to send alert when errors occurs only on SXMB_MONI, so, I researched and found some configurations to do in CCMS(started from here: http://help.sap.com/saphelp_nw70/helpdata/en/e3/bf3b7a8ccb8040b638ff732c551aeb/content.htm), jobs to start events collectors, etc, and after this, I could see a mail for an message mapping exception. BUT, this message, sent from CCMS to ALM, doesn´t carry out all the message parameters, like message Id, sender(service, interface), receiver(service, interface), that is very important to help to find the message with errors to be solved.
        There is somebody here that already done the Alert configuration to send messages for errors found only in SXMB_MONI(Monitor for processed XML Messages) ?
        There is a better way to achieve this ?
        Thank you for your attention,
        Wilson Rodrigo dos Santos
        SAP Netweaver XI/PI Consultant

Hi
Go through these links and follow it.
ALERTS CONFIG AND STUFF
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
Triggering by Calling a Function Module Directly.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Alerts with variables from the messages payload (XI) u2013 UPDATED
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Simple Steps to Get Descriptive Alerts from BPM in XI
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Triggering XI Alerts from a User Defined Function
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Throwing Smart Exceptions in XI Graphical Mapping
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1
/people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.ht
http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
check this links.
https://www.sdn.sap.com/irj/sdn/forums
Trouble shooting Alert configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
/people/matt.kangas/blog/2006/06/27/personalized-alert-delivery
Thanks
Saiyog

Message Mapping Transformation error in E-filing GB

Hi All,
I am running the E-filing GB interface and at the Message mapping I get Process Error:
The source structure, target structure, or a function library has been changed or could not be found in the Enterprise Services Repository. The mapping definition contains elements or attributes that do not exist in the changed structure, or functions that were changed in a function library. The relevant entries will be deleted.
Node with path /ns0:GovTalkMessage/ns0:Body/ns1:IRenvelope/ns1:EndOfYearReturn/ns1:P14/ns1:NICs/ns1:Earn/ns1:ETtoUEL not found in source structure Node with path /ns0:GovTalkMessage/ns0:Body/ns1:IRenvelope/ns1:EndOfYearReturn/ns1:P14/ns1:NICs/ns1:Earn/ns1:ETtoUEL/@Currency not found in source structure
I have already tested a few steps like:
1. We have applied the latest patch to E-filing GB. This did not help solve the problem.
2. Tested the Message Mapping. No error at Message Mapping.
Is there anything we are missing out on?? Please suggest.
Thanks,
Shwetha

Hi,
for me its looks cache issue,did you changed structure of source and target ?? check your function liabraris code,it is valid or not.
Regards,
Raj

XI 2.0 Message Mapping Activation Problem

Hi All,
When I attempt to activate a message mapping, I receive the following message:
Activation of change list cancelled
Check Result for Object Message Mapping ZHRMD_A05toEAI | http://com.sl.xi:
*Starting Compilation
*Error while Compiling
This is a rather large IDoc, so I'm wondering if it's a memory problem. Do you know where I can "Check Result"? The actual mapping is very routine, so I don't think it's a syntax problem.
Any help is greatly appreciated!
Kind Regards,
Jeff
Message was edited by: Jeff Kocur

It does appear to be a resource issue. Following your suggestion, I ran a test and received this message:
Messages:C:\jdk1.3.1_11\bin\javac -encoding UTF8 -classpath .;.\system-lib\boot.jar;.\system-lib\jaas.jar -extdirs .\additional-lib;.\services\deploy\work\applications\ExchangeRepository -d C:\WINNT\TEMP\12_9_21_22_10_2004 C:\WINNT\TEMP\12_9_21_22_10_2004\com\sap\xi\tf\_ZHRMD_A05BtoEAIZHRMD_A05B_.java
The system is out of resources.
Consult the following stack trace for details.
java.lang.OutOfMemoryError
<<no stack trace available>>
Compilation error

Regarding Message Mapping in JDBC Scenario

Hello Experts,
I got struct up in message mapping. In message mapping we can able to see different types of Functions. So I need some clarifications on it. Functions are available like...
Conversions
Boolean
Node Functions
Constants
Date
Text
Static
Arithmetic
So please explain in simple for each functions.
Points will be rewarded.
Thank you

Hi
*Boolean*:-
And -- checks for 2condition, return a true value if both condition are satisfied
Or --checks for 2condition, return a true value if one condition is true.
Not - checks if the condition is not equal to.
Equals - Check whether 2 Boolean values are equal
NotEquals
If u2013 Returns second value if the first argument is true. otherwise returns third argument
If WithoutElse u2013 Returns value of second argument, if first argument is true.
Node Functions:-
createIf - Produces empty value if argument is true; Resultlist.SUPPRESS otherwise
removeContexts u2013 Produces plain stream of values with No context changes
replaceValue u2013 replaces value of source field to value specified in Function Properties.
Exists u2013 Returns true, if Node exists otherwise false
SplitByValue u2013 inserts context changes after event specified
collapseContexts u2013 Produces one empty string value out of each arguments context. All arguments are in one context
useOneAsMany u2013 Use First Argument as IS on same level as third argument. second argument defines when next value of first argument is used
sort u2013 sorts values in each context
sortByKey u2013 Sorts values in second queue by keys from first queue
mapwithDefault u2013 Inserts default values specified in the function properties into empty contexts
formatByExample u2013 Takes values from the first queue and inserts them in the structure of second queue.
Constants:-
Constant u2013 Generates constant value
CopyValue u2013 Takes specified value in argument stream and copies it an infinite number of times
Sender u2013 Sender System
Receiver u2013 Receiver System
Date:-
CurrentDate u2013 Return current date in specified format
DateTrans u2013 Transforms date from input format to output format
Dateafter u2013 Returns True if first date is after second otherwise false
DAteBefore - Returns True if first date is before second otherwise false
CompareDates u2013 Compares two dates
Text:-
Substring u2013 Returns substring depending upon the given parameters
Concat u2013 concatenates 2 strings inserting delimiter string parameter between them
Equals u2013 Check whether Strings are equal
indexOf2 u2013 returns the index where the second string is found for the first time in the first string
indexOf3 u2013 As with indexOf with 2 parameters, But starting search at the specified position
lastindexOf2 u2013 Returns the index where the second string is found for the last time in the first string
lastIndexOf3 u2013 As with lastIndexOf with 2 parameters starting search at the specified position
compare u2013 compares 2 strings lexicographically
replaceString u2013 Replaces each occurrence of pattern(2nd argument ) of source string(1st arg). By third string
length u2013 returns length of string
endsWith u2013 Tests whether string ends with specified suffix
startsWith2 u2013 Tests whether string starts with specified prefix
startsWith3 u2013 Tests whether string starts with specified prefix beginning at specified location
toUpperCase u2013 Converts all characters in string to upper case
trim u2013 Removes white space from both ends of string
toLowerCase u2013 Converts all characters in String to Lower case
Statistic:-
sum u2013 calculates sum of all numbers in each context
average u2013 calculates the average of all numbers in each context
count u2013 Counts number of values in each context
Index u2013 For each incoming value, this Function returns the index number of the incoming value in the context, String from the initial index and increasing by the increment defined in the parameters.
Arithmetic:-
Add u2013 add two values
Subtract u2013 subtracts second value from the first value
equalsA u2013 Returns true; If float numbers represented by argument strings are equal otherwise returns false
abs u2013 returns Absolute value of argument
sqrt u2013 Returns square root of the number
sqr u2013 Returns square of the number
sign u2013 Returns -1 if number is negative, +1 if positive, 0 if 0
neg u2013 Multiplies number to -1
1/x u2013 calculates 1/x
Power u2013 Returns value of the first argument to the power of the second argument
Less u2013 Returns true if the first number is less than the second number otherwise false
Greater - Returns true if the first number is greater than the second number otherwise false
Multiply u2013 Multiplies 2 values
Divide u2013 Divides first value by the second value
Max u2013 Returns maximum of 2 numbers
Min u2013 Returns Minimum of the 2 numbers
Ceil u2013 Returns the smallest (closest to the negative infinity) initial value that is not less than the argument and it is equal to the mathematical integer.
Floor - Returns the largest (closest to the negative infinity) initial value that is not Greater than the argument and it is equal to the mathematical integer.
Round u2013 Returns closest initial value to the argument
Counter u2013 Counts number of invocations. Initial value and increment defined by Parameters.
FormatNum u2013 Formats Number with given pattern.
Conversions:-
FixValues u2013 Creates a Local Table to perform a value Mapping
ValueMapping u2013 Define jump to Value Mapping table of Integration Directory.
Message Mapping(Node Function) Part-1
Message Mapping Simplified - Part I
Sravaya Talanki- Message Mapping(Node Function) Part-2
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Standard Functions
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/frameset.htm
Advanced mapping function(mapwithdefault,formatbyexample,sort,sortbykey)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9202d890-0201-0010-1588-adb5e89a6638
Hope this is useful
Saiyog
Edited by: Saiyog Gonsalves on Jul 11, 2008 1:14 PM

Synchronous message mapping - access to originating request message?

Similar Messages

Maybe you are looking for