Synchronous Multi mapping in HTTP

Dear Process Integrators
I have a requirement where I am receiving an HTTP req (Synchronous) as an xml bundle, from System A. I have to split this incoming xml bundled message into individual messages and send it to another system B via a synchronous HTTP call.
The receiver system B will respond back for each message and then these responses had to be clubed together send it back to the sendersystem A.
Is it possible using sync/async bridge inside BPM?
Regards
Sourabh

receiver system B will respond back for each message and then these responses had to be clubed together send it back to
the sendersystem A.
You will have to make use of a FOR EACH block which will asynchronously send request to SysB and receive the response Asynchronously.
If you know that the message is to be splitted into only two messages, then the approach suggested by Jai (of having two SYNC Send Steps) wil work.

Similar Messages

Does Captivate 7/8 support *Dynamic* Streaming Video for synchronized Multi-Slide videos?

I'm experimenting with inserting Streaming Video into Captivate Lessons. I've set up an Adobe Media Server (AMS) to stream the video.
When inserting Multi-Slide Synchronized video, it's not clear whether/how I can insert a Dynamic Streaming Video link in a synchronized Multi-Slide Video.
(The Dynamic videos can switch between videos of varying quality based on the user's available bandwidth.)
I think you're supposed use a URL that points to a manifest file (.F4M), which catalogs the videos of varying bitrates. However, I can't seem to get it to work in Captivate and Adobe is a little vague on how/if one references the manifest file. (i.e. I can't find any examples.)
So, does Captivate support dynamic streaming video?
If not, which is more robust in Captivate? HTTP progressive download or regular (non-Dynamic) RTMP Streaming Video?

Thanks Erik.
We did some more tests/checking-around and have convinced ourselves that the URL needs to point to the manifest file in order for Dynamic Media Streaming to work.
When we examined the Adobe Media Server sample web page (below), we found buttons to select different media sources.
The 'Multiple Bitrate' button under RTMP Dynamic Streaming Sample is mapped to the URL of an F4M (manifest) file.
The 'Single Bitrate' button is mapped to an individual mp4 file.
We also found more clues in the FlowPlayer RTMP F4M page.
Also, I'm guessing that Captivate can't handle adaptive bitrate streaming from non-RTMP sources based on the menu options. (See screen capture below)
If the menu above is correct, the first choice is the opposite of streaming media, because it says 'Progressive Download'. (Progressive download caches the video file on the client machine.)
The next one is for private Adobe Media Streaming and the third is for 3rd-party Adobe Media Streaming services.
So, I'm pretty much convinced that it's not supported.

Multi Mapping

Hi all,
I need a help on how to go about the following scenerio.
XI first performs a multi-mapping that creates two output messages:
One is the target message in Flat File Format. The mapping also generates the filename for the output message which should follow the format 11_<Unique ID>.txt. This filename is written into the XML Payload of the message. The File Adapter later does a flat file conversion on the message. In this step, the filename is not written into the flat file. Instead, it is used by the file adapter as the target filename.
The file should be placed in a specified directory.
The mapping also creates a second message, which only contains the same filename in the payload. This message goes to a second File Adapter, which also does a flat file conversion. Its output only contains the filename that was created by the mapping, followed by a line break. The output of this File Adapter is written into the same directory as the first file. The name of the output file is 11.catlg. If the file already exists in the target directory, the output needs to be appended to this file.
Thankyou.

Shruthi,
It seems the payload contains the filename and this filename as to be used in the Communication Channel of file adapter.If my understanding is correct the problem can be solved by the Variable substitution. Refer the below link:[http://****************/Tutorials/XI/Variable/substitution.htm]
Regards,
Kiran Bobbala

Multi Mapping error

Hi,
I am required to have a IP recieve 3 IDOC types triggered from BD10 . It can trigger 3 or more IDOCs. For Eg.
1 ARTMAS (only 1) , 2 INFRECs and 1 LIKOND.
If anyone IDOC has come then after a waiting period of 1 minute it should come out of FORK.
My IP is like this.
In a FORK there are 4 branches.
1) ARTMAS receiver
2) Loop(infinite) with INFREC Receiver and a Container Operation to collect all IDOCs
3) Loop(infinite) with LIKOND Receiver and a Container Operation to collect all IDOCs
4) A wait Step with a container operation to initialize endtime variable
necesary branches: 4
The Fork Comes out when the end condition is met ie the End variable is Set or if all the IDOCS have come.
Corelation on MATNR.
Next I have the transormation and send step.
In the MM i have 3 Source and 1 Target.
Artmas 0-1 occurance
INFREC 0 - unbounded
LINKND 0-unbounded
I have created the Target with External Definition and have set the correct occurance in the XSD file
I have mapped the neceessary Segments from INFREC and LIKOND and all the Segments of ARTMAS to the Target structure.
In SXMBMONI it says error on Outbound side and
I see Mapping Exception when I seen in WORKFLOW.
Is my design Correct?
I have tested the Interface & Message Mapping they are correct
Request your help.
John Rajesh
<?xml version="1.0" encoding="utf-8" ?>
- <MappingTrace>
<Trace level="1" type="T">Mapping-Namespace:http://test.com/usa/SapRetail/ARTICLE_CLASSIFY/TESTDEMO</Trace>
<Trace level="1" type="T">Mapping-Name:IM_ARTMAS04_TO_ZARTMAS04_PUB01</Trace>
<Trace level="1" type="T">Mapping-SWCV:00000000000000000000000000000000</Trace>
<Trace level="1" type="T">Mapping-Type:JAVA</Trace>
<Trace level="1" type="T">Mapping-Program:com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="3" type="T">Multi mapping required.</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_.</Trace>
<Trace level="3" type="T">Load b8f12d30-2c45-11da-90af-ef160a892024, http://test.com/usa/SapRetail/ARTICLE_CLASSIFY/TESTDEMO, -1, com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_.class.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_.class (http://test.com/usa/SapRetail/ARTICLE_CLASSIFY/TESTDEMO, -1) in swcv b8f12d30-2c45-11da-90af-ef160a892024.</Trace>
<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MM_ARTMAS04_TO_ZARTMAS04_PUB_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns4:Messages/ns4:Message1/ZARTMAS04_PUB/IDOC. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:292) at

Check the following
1. Have u mapped the root level element?
2. Inside interface mapping, when u say read interface, is it diplaying both the interface.
Also check ur input
may be u r not providing proper input
Regards,
Prateek

SP14 Multi-mapping - error in receiver idoc adapter

Hi,
I have a scenario where a business service should send some XML to SAP CRM. I get the file via a sender JMS adapter and try to post it to CRM via a receiver IDOC adapter.
I have created a multimapping (1:N - 1 XML file to many Idocs) as should in the repository.
In the configuration under Interface Determination, I have chosen 'RB_SPLIT' and selected the interface multimapping.
It should be pointed out, that when testing both interface and message mapping i get no error. All idocs seem to be created as they should.
When testing the setup 'real life' the message fails. The error message in the monitor says:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>InterfaceCollection</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to interpret IDoc interface InterfaceCollection</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Notice that the above error is when trying to send only 1 record, which in turn then should result in only 1 idoc.
If trying to send multiple XML records, i get the following error:
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">MMF_ENGINETYPE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>A system error occurred in the outbound binding</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In the monitor in the payload of 'Request message mapping' I see as many Maindocument, Submaindocument pairs as should be Idocs.
Now i really don't know how to interpret the error messages in both cases, so I'm a little lost here...
It should be pointed out that the idoc being used everywhere in this scenario, has not been modified - from all places it is being used (and only exists) in the 'Imported objects | Idocs' place.
Also the Idoc is also being used as Inbound interface - so no mistakes here either.
I really hope someone can help me here, as I'm otherwise pretty stuck in this case.
Best regards,
Daniel

Hi Daniel,
I have exactly the same type of scenario (under SPS14 and now also SPS15), sending an XML message over JMS to XI and trying a multi-mapping to many IDocs (actually a list of orders in XML is mapped to n ORDERS Idocs).
I also face problems doing so, when I use the IDoc Adapter as outbound in the Receiver Agreement. I receive the following error:
CO_TXT_MMF_ENGINETYPE
Messages in multi message format can be sent to one adapter engine only
However, I tested the same scenario by just changing the Receiver Agreement to a File Communication Channel and - surprise, surprise - it works. One file per IDoc is created.
Of course, this is not what we want to accomplish, but when I checked this piece of documentation (sorry another link
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed364cf8593eebe10000000a1553f7/content.htm
the IDoc adapter is not listed in the list of Adapters that are supported. Does that mean, that this feature is not supported for generating IDocs? Maybe that's a question for a SAP OSS Message?
I hope that helped you a little further - if you find out more I'd be happy to learn about it.
regards,
Peter

Multi-mapping for ibound IDOC

Hi! All
It would be of great help if you provide your suggestions on:
Mapping one XML source file to 6 IDOC receivers, 2 of them are of the same type and 4 are distinct idoc types.
I tried multi-mapping and received the following error:
"Messages in multi-message format can only be sent to one Adapter Engine"
Looks like IDOC adapter does not support multi mapping...
Can you please suggest any other option apart from using BPM(since it consumes lot of resources).
Thanks a lot!!
Regards,
Patrick

Hey
its not possible to do Multimapping over IDOC's without BPM.
other way around can be to do a single -single scenario,suppose u have 6 IDOC's to post then u need to design 6 different scenarios for them.
without BPM you cant do multimapping for IDOC or HTTP
Thanx
Aamir
Message was edited by:
Aamir Suhail

Multi-Mapping without BPM

Hi ,
I am following this weblog
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
but stuck up with what are the fields contained by ID in target message2 ...
Please check this for your clarification
http://www.flickr.com/photos/11212307@N08/1135395357/
Thanks
dushanth

ID will have only ID under it. instead of creating flat structure like the one above Jin has changed the strucutre below . you will have only ID field in it or you want u can add other fields in it .
Regards
Sreeram.G.Reddy

Multi-mapping activate changes error

Good afternoon!
I want to use multi-mapping to split one IDoc(WBBDLD04) to some xml documents.I want XI to create one xml document per segment E1WBB01 of WBBDLD04 IDoc. I set Occurrence = 0..unbounded for target interface in interface mapping . Then I try to activate changes. IX generate errors:
MaterialMasterRequestMapping | http://sap.com/xi/SBO:
A multi-mapping with multiple source or target interface instances is only recommended with asynchronous interfaces, since only a mapping of this type can be used in the process editor. IDoc WBBDLD.WBBDLD04 | urn:sap-com:document:sap:idoc:messages are not asynchronous abstract interfaces
Mapping program Message Mapping MaterialMaster2SBO_GT2 | http://sap.com/xi/SBO does not match the interface mapping. The number or frequencies of source or target messages for the message mapping are not identical to the number or frequencies of source or target interfaces.
Tell me please, what I do wrong?
Thanks!
Lositskiy Alexandr

Alexandr,
You need to create an Abstract from your IDoc (Message Interface).
To use mutli mapping, you need to create a Business Process. Then in your Business Scenario, use your Business Process and reference your multi map.
Hope this helps.
Regards,
Simon

Need help in Multi mapping

Hi experts,
we have a scenario need to send an EDI text file to 2 different receivers. We are receving the EDI file using the JMS adapter as Sender and File/FTP adapter as a receiver.
We are using Multi mapping (includes Java mapping and Graphical ) to send the Messages to receivers, While sending we are getting the Error In Moni as "Error in creating Multi XML Document".
In Java Mapping we are Converting the EDI text to EDI xml with <ns0:Messages1> and the output of Java mapping to Graphical Mapping,
While testing in Interface Mapping Test it works fine.
Please provide your Valuable inputs.
Thanks,
Ramg

HI
The below is the output im getting from Interface mapping
=====
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1><ns2:MT_Req xmlns:ns2="http://test.com/CommonServices"><DataConversionArea><SapQtySign>P</SapQtySign><Filler> </Filler></DataConversionArea><DataElement><RspShipToLoc>000000</RspShipToLoc><Filler> </Filler></DataElement></ns2:MT_Req></ns0:Message1>
<ns0:Message2><ns2:MT_In_Req xmlns:ns2="http://test.com/CommonServices"><DataElements><ProdSchedNbr> </ProdSchedNbr><Filler>0030</Filler></DataElements></ns2:MT_In_Req></ns0:Message2></ns0:Messages>
=====
Thanks
Ramg

Issue with java mapping in a multi-mapping scenario

Hi
 We have a 1:n multiple mapping scenario in XI and the source is R3 proxy and target side is files. So, creating multiple file from a single message from R3 .
R3 --> XI --> Multiple files
Structure of the output of the multi-mapping is
- <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
- <ns0:Message1>
<Transaction>
</Transaction>
<Transaction>
</Transaction></ns0:Message1>
</ns0:Messages>
wherein each Transaction node represents a file.
Now, we need to introduce a constant /string like
<!DOCTYPE Transaction PUBLIC \"-//XXXXXX//DTD BatchReceiptAuthorization//EN\" \"http://dtd.XXXXXXX.com/dtds/ReceiptAuthorization.dtd\">
on each of the files at the very beginning - i.e within each transaction node , in the above structure, we need the above DTD string to be written. To do this, we added a java mapping as the second mapping after the message mapping that creates this string. Is this the right approach and would it produce what we are expecting ?
import java.io.BufferedReader;
import java.io.InputStream;
import java.io.InputStreamReader;
import java.io.OutputStream;
import java.util.Map;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationException;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import com.sap.aii.mapping.api.DynamicConfiguration;
import com.sap.aii.mapping.api.AbstractTrace;
public class ModifyRootAndDelay implements StreamTransformation {
 AbstractTrace myTrace;
public void execute(InputStream input, OutputStream output) throws StreamTransformationException {
 try{
 BufferedReader reader = new BufferedReader(new InputStreamReader(input));
 String NameSpacePrefix = "<!DOCTYPE Transaction PUBLIC \"-//innotrac//DTD BatchReceiptAuthorization//EN\" \"http://dtd.innotrac.com/dtds/ReceiptAuthorization.dtd\">";
 String sLine = null;
 StringBuffer XmlMsg= new StringBuffer();
 String Result,PayloadBody;
 int indexOfFirst;
 while ((sLine = reader.readLine()) != null) {
 XmlMsg.append(sLine);
 String StartingTag = XmlMsg.toString();
 indexOfFirst = StartingTag.indexOf("<MerchantID>") ;
 PayloadBody=new String(XmlMsg.substring(indexOfFirst));
 Result=NameSpacePrefix.concat(PayloadBody);
 output.write(Result.getBytes());
 /* Thread.sleep(200000); */
 }catch(Exception e){
 myTrace.addWarning("Exception raised in the JavaMapping:modifyNamespace.java""\n The Exception Message: " e.getMessage());
 throw new RuntimeException(e.getMessage()) ;
 } public void setParameter(Map param) {
 myTrace = (AbstractTrace) param
 .get(StreamTransformationConstants.MAPPING_TRACE);

Hi XI Gurus
 In my scenario, I sent the inputstream that is being passed to the Java execute method - to trace and I see that the whole of the xml file - as shown below - which is the output of message mapping ( from the first mapping step ) in sent to the execute method of the java mapping a single call
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<Transaction> </Transaction>
<Transaction> </Transaction>
</ns0:Message1>
<ns0:Messages>
So, I modified Java mapping program to look for multiple occurences of <Transaction> tag and prefix them with my constant DTD Literal - which is the primary reason , why I had to use Java mappings after the message mapping.
Now, I get an error is XI- SXMB_MONI
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING" />
<SAP:P1>unexpected symbol; expected '<', '</', entity refe</SAP:P1>
<SAP:P2>rence, character data, CDATA section, processing i</SAP:P2>
<SAP:P3>0</SAP:P3>
<SAP:P4>113</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The exception occurred (program: CL_XMS_MAIN===================CP, include CL_XMS_MAIN===================CM00A, line: 609)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Should I create multiple outputs - as many as the numberof target split files ( of type outputstream ) from the execute method in the java program ?

Multi-Mapping Error in PI 7.1 - External Definitions

Hi all,
We have just upgraded to PI 7.1 from 7.0 and run into an issue with message multi-mappings, just wondered if anyone else had met the same issue and worked it out...
When creating a message mapping, we are using as the target an external definition which is defined by an XSD generated by a third party tool (Seeburger).
When I map 1:1 (1 source message to one target message) in the message mapper, all is fine but if I try to create a multi mapping, I get an error. The process is:
a) I have a message mapping with one target message, defined as an External Definition.
b) I then go to Signature tab and add a second target message as an External Definition
c) Click back to Definition tab
d) Get the error "Object XXXXX | YYYYY not found" - where XXXXX is the external def name and YYYYY is the namespace (the SWCV namespace that is, not the XML namespace)
This only seems to happen with External Definitions which are autogenerated and I strongly suspect that is has to do with the fact that the tool that generates them always does so without an XML namespace. I have not proved this though (other Ext Defs with namespaces work for multi-mappings but that is not the only difference so I can't be sure that is the issue but have a strong hunch. This problem did not occur in 7.0.
Anyone got any ideas?
Thanks,
Chris

Hi,
This would not be of much help but, I was able to encounter this issue in XI 3.0.
What we did was to manually edit the XSD and add a namespace to it. I'm not sure if PI 7.1 is able to handle mutiple namespaces, so we limited it to this value <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified"> and made sure that this value is used for all the External Definitions used in the multi-mapping.
Regards,

Error: 1:n multi-mapping using BPM for file to file scenario

Hi. Iu2019m trying to do 1:n multi-mapping using bpm scenario. I use file to file. Input file consists of many records and then I want many record to be transformed into many file at target system. I follow step in http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/. However, I have a problem when file is retrieved in to XI. It doesnu2019t create any output file.
When I look at SXMB_MONI, it shows u201CNo object type found for the message Check that the corresponding process is activated.u201D Besides, it shows error message "Unable to perform action for selected message" when i clikc at PE in SXMB_MONI.
I have check at many previous posts with the same error message but still couldnu2019t solve it. I already activate my BPM and check that status in SXI_CACHE = 0. There is noting left in change list of my IR and ID.
Here is my design and configuration.
IR
Data Type: DT_file_split -> for both input and output file
Message Type: MT_file_split_sender, MT_file_split_receiver
Message Interface: SI_file_split_in, SI_file_split_out, SI_file_abs_source, SI_file_abs_target
Message mapping: MM_file_split for mapping MT_file_split_sender with MT_file_split_receiver
Interface mapping: OM_file_split
u2022 Source = SI_file_split_out
u2022 Target = SI_file_split_in
u2022 Mapping Program = MM_file_split
BPM following this link http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/.
ID
Import my Integration process
2 Communication Channel for getting input file (CC_File_split_sender) and creating output file (CC_File_split)
2 Receiver determination:
u2022 Source system to BPM using interface SI_File_Abs_source
u2022 BPM to target system using interface SI_File_Abs_target
1 Interface determination:
u2022 from source system to BPM
u2022 Sender interface: SI_File_Split_Out
u2022 Receiver interface: SI_file_abs_source
1 Sender Agreement
u2022 Commu. Component: Source System
u2022 Using interface: SI_File_Abs_source
u2022 Sender Communication Channel: CC_File_Split_Sender
1 Receiver Agreement
u2022 Sender Communication Component: BPM
u2022 Receiver Communication Component: Target System
u2022 Receiver Interface: SI_File_Split_In
u2022 Receiver Communication Channel: CC_File_Split
Anyone know how to fix this?
Thanks,
Pavin

Hi,
Yes, thats the problem.
You are creating file from test tab of 1..N mapping .
In case of 1..N mappping in mapping Extra tags of messages are addded to the data.As shown here:-
Messages
 Message1
 MessageType
When you use this mapping to generate xml message then it will add additional tags for <Messages> and <Message1>, which is not correct. it should only have structure of you MT.
So remove start and end tag of <Messages> and <Message1> from your data file. Mentioned below in bold.
<xml......>
<Messages>
<Message1>
<MT_...>
</MT_...>
</Message1>
</Messages>
This should solve your problem.
Regards,
Sami.

Error in Multi-mapping without BPM

Hi frnds,
I am doing a scenario File-XI-File. I am using the multi-splitting thing in the Message mapping. I have taken care of all the occurance's and "enhanced" thing in the IR and ID resp. I m using SP16. I want to avoid BPM.
But therez sme error cming up. When I check the MONI, its shwing "No messages created from split mapping" and when I test my interface using the Test Configuration in the ID, its shwing error in the Receiver Determination -- "HTTP connection to ABAP Runtime failed. Error: 403 Forbidden"
I have checked most of the blogs and forum suggestions. I have checked the ICF activations as well ...
So, do come back to me with your valuable suggestions, and I will award them points, if they really help me out.
Thanks and regards.
Neetesh

Hi Neetesh,

When I check the MONI, its shwing "No messages created from split mapping"
For this, Can you check the source XML. Does it contain Tags like <messages> .. If yes, you need to remove them from your source XML.
If i am right, you have copied the XML from the TEST tab of the message mapping and pasted it in a notepad and saved it without making any changes at all..... Just do as i have mentioned above and i am sure you will no more get that error message in your MONI....
Also go through this weblog which talks about multi-mapping without BPM,
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards,
Abhy

Reg:multi mapping

Hi,
I'm working on multi mapping using BPM and the i'm using xslt mapping.
So can u guys post some useful links regarding multimapping using xslt mapping in BPM.
regards
jithesh

the thing in case of multimapping, internally the structure (XML) of the message looks like say eg;
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <ns0:Message1> <CREMAS01>
 <IDOC BEGIN="">
 <EDI_DC40 SEGMENT="">
 <TABNAM/>
 <MANDT/>
 <DOCNUM/>
So in your XSLT you need to handle that nodes. Rest will be same as any XSLT mapping.

Multi-Mapping and Dynamic Configuration

Hello,
Is it possible to use dynamic configuration in mulltip-mapping? (message split?)
in a proxy-mail scenario I am using a multi-mapping. The message gets splited by a specif field.
(Field of source message-SplitByValue(Value Change)-CollapseCOntext->Target Message(1..N)
WIthin the graphical mapping I have a dynamic configuration for the "Mail Subject"
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey keySubj = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/Mail", "THeaderSUBJECT");
conf.put(keySubj, pSubject);
return pSubject ;
I have mapped this field to a field in the target message.
The messages are being splitted as expected and the value of pSubject is also correct.
BUT when receiving emails the subject field has the same value for all splitted messages.
My Question is "conf.put(keySubj, pSubject);" overwitting all splitted outgoing messages?
Thanks for the Help
EMW

As stated in http://help.sap.com/saphelp_nw70/helpdata/EN/43/09b16006526e72e10000000a422035/frameset.htm
Adapter-Specific Attributes and Multi-Mappings
In multi-mappings, there are multiple message headers with adapter-specific attributes. The mapping API can only access one message header. This has the following consequences depending on whether there are multiple source or target messages:
●     1:n Transformation
If there are multiple target messages, the header for the adapter-specific attributes is copied for each message. This means that you can only create one header for all adapter-specific attributes, and not individual headers.
●     n:1 Transformation
This variant is only possible for multi-mappings in integration processes. If there is more than one source message, read-access to the adapter-specific attributes of the various message headers is not possible at runtime.
●     m:n Transformation
All afore-mentioned restrictions apply here. Developers can at most write the same adapter-specific attributes for all target messages to the header, without read-access to the attributes of the source messages. m:n transformations are only supported within integration processes.
Regards,
Henrique.

Synchronous Multi mapping in HTTP

Similar Messages

Maybe you are looking for