Synchronous Sender HTTP

Scenario
HTTP(Synchronous) -
> XI -
> RFC (Synchronous)
Question :
Since the Sender is an HTTP "NO SENDER AGREEMENT " is Required, whether my understanding is Correct? (I am getting confused because the Sender HTTP is a Synchronous System). Please clarify.
Thanks.

HI Jenni,
It is not required to have sender Http Adapter so there is not required to have Sender Agreement,
Inorder to do Synchronous communication, in the http client , you need to give Quality of Service as <b>BE</b> i.e Best Effort. If so, then it will act as a Synchronous call. As usual you need to have Http Req and Resp data structure to handle this
Regards,
Moorthy

Similar Messages

Synchronous Send step showing errors in process designer

Hi All,
I have few questions in using a synchronous send step in
BPM.
Can I use a synchronous send step without opening Sync/async bridge.
When is the sync/async bridge opened?
Scenario:
File async --> XI (receive async) --> sync send step to J2ee application (HTTP post) --> async response send to File
Sync Abstract Interface:
Input:
Message type (same as outbound)
Response:
Message type (same as Http response)
When I use the synchronous step, I see errors in the process designer saying
Message to be sent and synchronous interface are not of the same type. This happens for both request and response message.
Please help me.
Regards,
Meher

I think the Problem is with the INTERFACE Determination.
You need a BPM for the above scenario, but not a Sync/Asynch Brindge
In BPM
Step 1 : Receive from File 1
Step 2 : Do Transformation from File1 format to J2EE Request Format
Step 3 : Send a Synchronous send Step to J2EE
Step 4 : Transform the HTTP response to your File2 Format Response
Step 5 : Send the Response to File2
Interface Determination
File1 to j2ee Request
J2ee Request/Response To J2EE Request/Response
J2ee Response to file 2
Please check your Interface determination very closely.

ERROR IN BPM Synchronous Sender-Urgent

Hi ALL,
I has the following Integration Process:
Receiver-----Synchronous Sender--
Sender(async)
When iam trying to Split the Message in Synchronous Sender
where the receiver for Synchronous send message is a HTTP adapter iam getting the following Error in SXMB_MONI
"Messages in multi message format can be sent to one adapter engine only ".
Is there any solution for this?Its urgent
Is there any solution that can split and send the messages individually to the HTTP so that i can Split the message inside a BPM and use the BPM to send each individual message seperately.
Please Help me in this Issue its Urgent
Thanks
YeswanthRaj

Hi YeswanthRaj,
you have to use the send step in a block with mode:
ParForEach or
ForEach.
You cannot send a multilieContainerElement!
See: http://help.sap.com/saphelp_nw04/helpdata/en/f6/e1283f2bbad036e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ce/bb2c421f3fda2ce10000000a1550b0/content.htm
You have also a sample in your integration repository; See SWC: SAP BASIS
BPM: MultipleFlightBookingCoordination
Regards Mario

Error when Splitting the Message in Synchronous Sender -BPM

Hi ALL,
I has the following Integration Process:
Receiver-----Synchronous Sender--
Sender(async)
When iam trying to Split the Message in Synchronous Sender
where the receiver for Synchronous send message is a HTTP adapter iam getting the following Error in SXMB_MONI
"Messages in multi message format can be sent to one adapter engine only ".
Is there any solution for this?Its urgent
Is there any solution that can split and send the messages individually to the HTTP so that i can Split the message inside a BPM and use the BPM to send each individual message seperately.
Please Help me in this Issue its Urgent
Thanks
YeswanthRaj

Use a transformation step to split the message then use a Block with par for each option and have the sync send in side it. Then send this asynchronously to the system you want to send it to.
VJ

Synchronous Sending followed by Transformation

Hi All,
In my problematic business process, a synchronous sending step is used to send a request to a web service and get the response of the web service. A following transformation step converts the received response message to another message. Error occurs in this process.
If I doesn't use the response as the input of the transformation, no error occurs.
It seems that there's some problem in the response message. But that message can be correctly sent in a send step (close S/A mode).
The error message is like this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Pipeline timeout condition satisfied</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Does anybody have similar experience?

Hi
Go thru these blogs
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/ravikumar.allampallam/blog/2005/02/17/bridging-the-sync-async-bridge-with-fork-xi
Chk did u followed all the steps from these blogs.
Regrds
Arpit Seth

Synchronous Send Step

Hi
Can someone tell me about sync send step in detail
because in my scenario I am using a sync. send step and the other end is oracle database which uses a SP(stored procedure) for updation.
problem is that I am able to see updation process successfully in the database i.e.the adapter says processing successful.
but after certain amount of time the send step in the sxmb_moni shows error
I think the problem is with the return flag that I am using as an acknowledgement
which is sent by the SP, any suggestions pls
Ranjit

Hi,
This might help you
Synchronous Sending followed by Transformation
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
Re: Sync - Async Bridge
Regards
Agasthuri Doss

Can anyone plz send HTTP to RFC scenario

Hi everyone,
can u guys send me the HTTP to RFC scenario? plz send the detail scenario for HTTP-XI-RFC.
thank u in advance
xilearner

1.Created data types for mapping with HTTP request and response.
2. Created messsage types and assigned corresponding data types to the message types.
3. Created one Message Interface (Outbound/Synchronous) for HTTP type and no need to create interface for RFC. You ca use the one which you have imported from R/3.
4. Create request and response message mapping and one Inteface mapping (with request tab and response tab) properly assigned.
Defined the following in ID:
1. Created HTTP business system (no communication channel)
2. Created communication channel for receiving system (SAP).
3. Created receiving determination and interface determination, receiver agreement, no sender agreement.
Check this link on how to configure RFC channel.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
Send XML message from HTTP client and you will see the response in the same.
Regards,
Sudheer.

Sender HTTP and validation

Hallo,
we have a HTTP sender to allow partners to send HTTP/XML message. THese messages are converted to IDOCs and are posted to the R/3 system.
HTTP -> IDOC scencario
Until now we have no validation of the incomming XML message.
Goal is not to accept the wrong XML message and to send back a HTTP error code to the sender.
Is it possible to have an adapter module on the planHTTP adapter? As I understood this is not possible???!!!
Is it possible to use the SOAPsender Adapter with the option "No Soap"? I still want to receive HTTP/XML message and I do not want to force my partners to call a webservice.
Can I implement a adapter module in the SOAPsender to return a specific HTTP code if the XML validation fails?
Can this be done only in SYNCHRON mode?
The problem is, the the IDOC to SAP is only asynchron, so do I have to implement a BPM with SYNCH-ASYNCH bridge then?
I know, a lot of questions but all because there is no valiation on XI at the moment.
Best regards
Werner Magerl

Hi,
> Irrespective of where you are doing the validation,
> as Idoc is an Asynch always, wouldnt you need a BPM
> with a Synch - Asynch bridge.
Yes, this is clear and I have implemented this BPM to cover this SYNC-ASYNC problem. I ecpected here, also, that I can send back a HTTP error code, but the only thing which is sent back is HTTP-200 for ok and HTTP-500 (time out).....
> Even if the XML message
> is valid and Idoc is sent succesfully, are you not
> going to send some response back to the HTTP? Wouldnt
> you be using a BPM in this case too?
this is the reason, why I try to do this in an adapter module. Because I think, then the HTTP connection is still open and I can send each HTTP code I want before the message arrives in the integration server or in a BPM
> There are 2 options from what I can understand of the
> requirement,
>
> 1. Either make an Asynch call and avoid a BPM
> altogether , but not propogate back any success or
> error message.
no, we wnat to show an error
> 2. Make a synch call and use a BPM, and propgate
> either a success or failure message.
this is also a way we are working on, but here we have the problem of defining the answer message interfaces.
The incomming message is defined by a industry specific XSD and I was not able to enhance this message interface to be SYNCHRON and with ANSWER message.
But if adapter mdouel is not possible we will work on this again.
reagrds
Werner
>
> Regards,
> Bhavesh

Synchronous sender JDBC to RFC

Hi alll
in case of sender JDBC Adapter,
i would like to put a result value of processing of target system at sender side.
but i have no idea with sender JDBC,
anyone has idea? if i am not going to use BPM

Hi Tony,
Check these threads, they contain solution to your scenario.
JDBC source in a Synchronous BAPI call.
Re: Can I configure JDBC Sender to process the RFC response message?
Re: JDBC Sender Synchronously?
Configuring JDBC sender
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Configuring JDBC Receiver
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
Regards
Anand

Problem in sending HTTP request to the server.

Hi,
i dveloped an ant script for sar deployment.
i deployed a sar to my local soa server with ant script. it got deployed succesfully..
but when i try to deploy to a remote server, getting the below error..
"Problem in sending HTTP request to the server. Please make sure the server is up and/or check standard HTTP response code for 404"
but the server is up and runnig and i am able to ping it from my machine and also access the console...
below is my script
build.properties
wn.bea.home=C:/Oracle/Middleware
all.needed.jars.path=D:/SourceCode/neededJAR
oracle.soa.home=C:/Oracle/Middleware/Oracle_SOA1
java.passed.home=C:/Oracle/Middleware/jdk160_24
#Deployment environment
deployment.plan.environment=DEV
#Deploy Action
deployAction =redeploy
#credentials
user=weblogic
password=welcome1
#For Composite deployment
serverURL=http://10.177.154.6:7001
forceDefault=true
server=10.177.154.6
port=7001
sarLocation=D:/SourceCode/JAR
build.xml
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="soaDeployAll" default="deployAll">
     <echo>basedir ${basedir}</echo>
     <property environment="env"/>
<echo>current folder ${basedir}</echo>
     <property file="${basedir}/build.properties"/>
     <taskdef resource="net/sf/antcontrib/antlib.xml">
     <classpath>
          <pathelement location="${all.needed.jars.path}/ant-contrib.jar"/>
     </classpath>
     </taskdef>
     <target name="init">
          <tstamp>
               <format property="timestamp" pattern="yyyy-MM-dd_HH-mm-ss"/>
          </tstamp>
          <property name="build.log.dir" location="${basedir}/buildlogs"/>
          <mkdir dir="${build.log.dir}"/> <property name="build.log.filename" value="build_${timestamp}.log"/>
          <record name="${build.log.dir}/${build.log.filename}" loglevel="verbose" append="false"/>
          <echo message="Build logged to ${build.log.filename}"/>
     </target>
     <target name="deployAll" depends="init">
     <echo>Deploy for environment ${deployment.plan.environment}</echo>
     <antcall target="deployAllComposites"/>
</target>

     <target name="deployAllComposites" depends="init">
     <foreach target="deployComposites" param="Files">
          <fileset dir="${sarLocation}" casesensitive="no" includes="*.jar"/>
     </foreach>
     </target>
     <target name="deployComposites" depends="init">
     <basename file="${Files}" property="basename"/>
<echo>Deploy Project ${basename} for environment ${deployment.plan.environment}</echo>
          <if>
               <equals arg1="${deployAction}" arg2="deploy" />
               <then>
                    <echo message="Deploying composites in Managed server........." />
                    <ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
                         <property name="serverURL" value="${serverURL}"/>
                         <property name="user" value="${user}"/>
                         <property name="password" value="${password}"/>
                         <property name="overwrite" value="false"/>
                         <property name="forceDefault" value="${forceDefault}"/>
                         <property name="sarLocation" value="${sarLocation}/${basename}"/>
                    </ant>
               </then>
               <else>
                    <echo message="ReDeploying composites in Managed server........." />
                    <ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
                         <property name="serverURL" value="${serverURL}"/>
                         <property name="user" value="${user}"/>
                         <property name="password" value="${password}"/>
                         <property name="overwrite" value="true"/>
                         <property name="forceDefault" value="${forceDefault}"/>
                         <property name="sarLocation" value="${sarLocation}/${basename}"/>
                    </ant>
               </else>
          </if>
</target>
</project>
please help....

Hi,
Give the serverURL as http://<host>:<managed.server.port>/soa-infra/deployer and try.
e.g . http://10.177.154.6:8001/soa-infra/deployer
Regards,
Neeraj Sehgal

Fault message in synchronous send step in BPM

Hi,
When executing a synchronous send step in BPM it is possible to handle application errors (fault messages) with an exception branch. But how do you get hold of the actual data in the Fault message(faultText, faultURL, faultDetail etc) for further processing (mapping)?
Kind regards Johan

Johan,
u have to define another container element in integration process.
For that container element an Async Abstract interface has to created with falult message as the message.
Do u have the fault message defined already...
Also go through this thread.
Fault message handling in BPM
-Naveen.

BPM Error: Synchronous Send Step

Hi All,
I am getting the below error in the synchronous send step of my BPM.
Interface urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
I am trying to send a query and get data from a table in this step. I have an abstract synchronous interface attached to this step and I have an inbound synchronous interface at the configuration side as the receiver for the BPM sync. interface.
The errored out interface is the abstract interface used as the response message at the BPM sync step.
Does anyone has encountered this before?
additional error info)(
Work item 000000364714: Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed
Message no. WL821
Diagnosis
The calling of the object method for the work item ended with a return value for which no handling is modeled in the workflow.
System Response
The work item was forced into the error status.
Procedure
Refer to your workflow system administrator.
Procedure for System Administration
Also check the binding between the task container and the method container.
Appreciate your help!
Regards,
Shiny

Hi,
e urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
Are u using 7.1 versin of PI, if so can u check if u r consistently using operation name in interface
Babu

ABAP Program to send HTTP message

Hi All,
I tried executing the program in "[ABAP-Based HTTP Client for Messages to SAP XI|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ae388f45-0901-0010-0f99-a76d785e3ccc]" Article to send HTTP messages to XI system.
Entered all required parameters and entered XMl Payload with the option "Insert Payload as Text"
The scenario in XI has Integration Process and the first step is a Sync-Async step.
The message execution fails in that step with status "Pipeline Timeout"
I can see only half of the xml payload in sxmb_moni.
There are no short dumps and the Integration Process is working fine when I send messages using HTTP client.
Let me know if there are any checks for tracing the problem.
Thanks,
Uma

Hi,
I have gone thru this blog but I want send SMS to US Mobile no.I checked other webservice but it supports only few cellular networks in US.
any other alternate for this...
anyway thanks for your reply
Regards,
Nivas

Sender http adapter - decoding (URL unescape)

PI 7.0
Incoming http request in XI is URL decoded. Currently I am using java mapping to decode it. Is there a way to set any adapter specific properties in sender http adater so that I can avoid the java mapping for decoding. Or any settings in SICF? In other words, how can XI handle encoded http requests?
When XI makes a external http request, I can set a property "Mask Special Charcters (URL Escaping)" in the receiver http adapter. XI will make a encoded http request, meaning the xml will encoded in UT-8.

Hi Ted,
I'm currently trying to do something like that, but not yet totally successed with a base64 encoded payload.
Here two documents that I really find interresting:
How to Configure Message Level Security in SAP Exchange Infrastructure 7.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d024ca8e-e76e-2910-c183-8ea4ba681c51
How to handle unstructured source contents for Adapters (with Java mapping or with Module)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/482aae19-0301-0010-3485-8efd618818d0
if you find others... I'm ok to know it also
Cheers.
Mickael

How to send HTTP Post to URL (third party software) in JSP/JSPDynpage

Hello,
we want to integrate a third party application in our Portal Component (JSPDynpage using JSP and HTMLB). This third party component is called like this:
http://servername:port/cgi-bin/cgi.exe?request=map&format=html&swldy_ace=GDF&swldy_image_format=p n g&width=525&height=375
How can we do this in the JSP using HTMLB?
Thanks for your help.
Best regards,
Daniel

Hi Detlev,
thanks for your hint regarding the App. Integrator, but it seemn not to be what we want to do: We call a CGI and get a JEPG Image back as request.
Now we used the java.net.URLConnection to do the HTTP post in the JSPDynpage:
// send HTTP POST
try {
u = new URL("http://server/path/ourcgi.exe");
} catch(MalformedURLException ex) {
System.err.println("MalformedURLException");
// build query sting
String query = "request=plot&format=jpeg&template_name=......."
int cl = query.length();
try {
// open the connection and prepare it to POST
URLConnection uc = u.openConnection();
uc.setDoOutput(true);
uc.setDoInput(true);
uc.setAllowUserInteraction(false);
DataOutputStream dos = new DataOutputStream(uc.getOutputStream());
dos.writeBytes(query);
dos.close();
} catch ...
Best regards,
Daniel

Synchronous Sender HTTP

Similar Messages

Maybe you are looking for