Syncing 2 Macs & Lots of Items Added or Deleted Every Time

I sync my iCal calenders between my home and work computers with .Mac. It has been working great though recently, the last couple weeks, every time I start up my computer at work and syncs it says it wants to add 40 some items and when I go home at night and start & sync that computer it says it wants to delete 40 some items. It is always about 40, which is more events than I ever usually add on a day to day basis. Can anyone figure out what is going on here? When I check my Calender it looks like everything is OK, but I am getting increasingly nervous that things are/are going to start disappearing without me noticing it. If there was some way to figure out what items were causing the abnormality I could go and get rid of them off of both computers.
Any ideas would be great, thanks....

Zachary,
I think if you just check one of your computers to be sure the data is "correct" there, you can then use .Mac system preferences (advanced tab) on both Mac to "Reset Sync Data..."
Comeback if you need more help than this.
BTW: Very few problems are associated with .Mac sync though several do appear associated with iSync (and there is a very good set of trouble shooting direction for that here: Craig Fer, "iCal crashes on launch", 07:57pm Jul 22, 2005 CDT )

Similar Messages

  • Hello, my mac book air won't update. Every time i try it goes onto the purple starry screen and stays that way for hours, so i just have to shut it down. I have deleted a lot on my laptop so there is enough space, please help?

    Hello, my mac book air won't update. Every time i try it goes onto the purple starry screen and stays that way for hours, so i just have to shut it down. I have deleted a lot on my laptop so there is enough space, please help?

    I believe that system has a hall sensor on it to detect when the lid is closed so it can put the system to sleep and/or disable the monitor so it can be used with an external monitor only. If the sensor is marginal or has a bad cable, it may intermittently cut the monitor on and off, and may likewise put the system to sleep. One way to check would be to plug in an external monitor and if the laptop's screen cuts off or doesn't show up, start using the trackpad and press on a non-typing key like the shift key. If the external display suddenly pops and becomes active while the laptop display remains black, it's probably a problem with the sensor or the cable/connection. You might be able to fool the sensor into kicking on and off by moving a magnet over it. It's located on the left had side of the base with the unit opened up, and right over the audio output plug.
    I know of some people that put a small magnet right over the hall sensor's location so the laptop display turns off and they use the system with an external monitor, keyboard, and mouse. If fooling with magnets, make sure they're small and don't get them close to the hard drive because a strong magnet can wipe them out.
    I don't know if this will help you much, but it might.

  • I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

    I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

    Oh, dear.
    If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
    OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
    I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
    PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

  • I have a draft in Yosemite Mail which I cannot delete - every time I try Mail crashes.

    I have a draft in Yosemite Mail which I cannot delete - every time I try Mail crashes.

    In Mail Preferences > Accounts > Mailbox Behaviours there are options for deleting junk mail. Try setting it to "Delete junk messages when quitting mail."

  • Why does my mac mini's mouse show a pinwheel every time I hover over the date area? Also, sometimes the date shows up incorrectly.

    Why does my mac mini's mouse show a pinwheel every time I hover over the date area? Also, sometimes the date/time shows up incorrectly. It started happening after I updated to OS X Mountain Lion.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Outlook Calendar items added and deleted at same time

    I have several repeating calendar items (like birthdays) in my Outlook calendar.  When I sync, I find that some are added (that I thought were there before) but some show as added and deleted at the same time to my blackberry... any ideas what may be causing the confusion?

    I find myself with the same issue, I just wiped my computer and began syncing and installing all programs back into laptop,now i have noticed that outlook does not add the some events in my calender, for instance, birthdays , one thing that i have noticed is that it only syncs items that have my work email, my other 2 emails are not being synced and those are my blackberry and personal emails.
    my syncing preferences are made to go both way sync ... what seems to be the problem 
    thanks 

  • Why does it take 10 or more minutes for i tunes to "determine tracks to sync" when i haven't added or deleted songs?

    why does it take i tunes more than 10 minutes to "determine tracks to syn" when i haven't added or deleted songs? all i have done is change the name of a playlist.

    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    See also;
    *http://kb.mozillazine.org/Error_loading_websites

  • I installed Facetime on my Mac but it doesnt show "Contacts" . Every time I sign in to my account, I can only see the icon"Next" but nothing happens when I click that. Is there an way to uninstall and reinstall facetime ?

    Is there a way to uninstall and reinstall Facetime on Mac ? The present version simply doesn't work. It shows me no "Contacts'. Infact once I click Next after I login, nothing at all happens. The video works fine though, I can see ,myself. But I have used Facetime a couple of times in the past from this same MAC.
    Hence I wanna know if there's a way to uninstall and reinstall Facetime. Infact it doesn't even allow me to uninstall Facetime , every time I try it says, 'your Mac OS X needs Facetime'. PLEASE HELP !!!

    deltajane wrote:
    My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream.  I did see everything there several weeks ago, so I know it worked. How do I access those from my computer.  I can't find how to sign on. 
    This is the article that will assist with this part of your post:
    http://support.apple.com/kb/ht4486
    deltajane wrote:
    I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
    What you've outlined in this part of the post is all that icloud stores for you outside of the backup. If you want to restore from the icloud backup you will then have for all practical purposes a carbon restoration back to your device if you restore from the icloud backup.
    deltajane wrote:
    I want to delete photos that are on my iphone, by doing so from the computer, not my phone.
    Syncing your device with itunes will then enable you to remove whatever photos you wish to remove from your device deleting them with the computer and not the iphone.

  • What do I do to stop Finder in Mac OS 10.9.3 from crashin every time I open a Dropbox Folder ?

    Right after I installed the latest version of Dropbox 2.8.3 on my MacBook Air with Mavericks 10.9.3, my Finder restarts every time I try to access the Dropbox folder.
    I know the documents are there because I can access some of them directly from the "Recent items" menu in some programs.
    The problem persists even after I quit the Dropbox Program on the menu bar. I have also restarted the computer (also tried it in Safe Mode).
    Don't know what else to try. 
    Pretty much all my documents are in Dropbox so the Mac is almost useless until I solve this problem. 
    Any suggestions Please ?
    Thanks.

    Linc Davis
    Posted his solution here:
    https://discussions.apple.com/thread/3768164?start=0&tstart=0 :
    Back up all data if you haven’t already done so. Before proceeding, you must be sure you can restore your system to the state it’s in now.
    Launch the Terminal application by entering the first few letters of its name into a Spotlight search. If that doesn’t work, then in the Finder, press the key combination shift-command-U. The application is in the folder that opens.
    Copy or drag – do not type – the line below into the Terminal window, then press return:
    find ~ -type f -name .DS_Store -delete
    The command will take a noticeable amount of time to run. When a new dollar-sign (“$”) prompt appears below what you entered, quit Terminal.
    It solved the problem.

  • My iPod playlists are deleted every time I plug my iPod into my MacBook Pro.

    Every time I plug my iPod into my MacBook Pro, my iPod playlists are deleted.  I have all the sync features turned off on both the iPod and computer.  What is happening?  I hate having to remake my "Workout" playlist everytime I plug in!

    Correct.  All sync features are turned off and if is 'manually manage' somewhere, I have checked the box to do so.  So basically everything is set for me to manage manually, yet my iPod playlists are still being deleted.

  • Mac OSX 10.5.6 update fails every time

    Hi,
    I recently did a defrag on my macbook pro and reinstalled it from the leopard disk. And so it was reset to mac OSX 10.5, now every time I try the combined update to 10.5.6 it fails, I tried twice with the updated deleting in after the first try. I then downloaded it from the downloads but to no avail.

    Hello and welcome to the discussions. Just recently the 10.5.6 combo update was revised to allow the update from 10.5.0. Before it was required 10.5.1 to update using the 10.5.6 combo. Try updating to 10.5.1 then run the 10.5.6 combo.
    You can download 10.5.1 here:
    http://support.apple.com/downloads/MacOS_X_10_5_1Update
    Hope it works for you,
    Glynn

  • I am trying to sync my wifes iphone on her macbook and every time we do this it reverts to her old iphone and erases all photos, contacts, emails etc. I seem to get in trouble each time i do this. Any suggestions?

    I am trying to update my wifes iphone5 to her macbook. The macbook already has her old iphone4s information. I would like to set up a new id for her so that I can keep all of the information on her phone and get rid of the old stuff on her macbook now. Is there an easy way to do this now. I have an account on my laptop and dont sync with my macbook so it doesnt really matter to me with my iphone5, but i would like to start fresh with hers. It seems like every time I go to sync it i get a message that there is already an account under that user name. Can i keep the same user name and start fresh with what is on her 5.

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • IPhone syncs same 213 songs  and same 21 photos every time

    Lately, every time I plug my iPhone to my computer, the same 213 songs and the same 21 photos sync every time. I have the option checked to convert songs to 128 kbps AAC to free up more room on my phone, but it is annoying because I have to wait for these songs to finish before any new movies can be synced, and I really do enjoy not having to manually add every new song to my iPhone that goes into my library, but I'm getting tired of it taking this long to sync every time. Anybody else having similar issues?

    I was having the same issue when syncing my iPhone using the conversion option to my MacbookPro. It was syncing the same 12 songs every time I would sync. I updated iTunes to the latest version 9.1(12). The version I was using was 9.1(11) and for some reason, software update was not picking up the version 9.1(12), so I had to manually download it and install it from the Apple site. Anyway, after the install, everything synced fine.

  • I have a problem with a popup saying that my browserhistorie is beeing deleted every time

    when i open Firefox i get a popup deleting my browser historie every time saying "browser historie is now deleting"
    this is very annoying and i don't want my browser histories deleted.
    how can i stop this? please help

    This can happen if you use [[Clear Recent History]] to close the History if you close Firefox and Firefox wasn't able to clear the history. Firefox will clear the selected on the next start in that case.<br />
    Make sure that Firefox is closing properly.<br />
    See "Hang at exit":
    * http://kb.mozillazine.org/Firefox_hangs
    * [[Firefox hangs]]
    * http://kb.mozillazine.org/Kill_application

  • How can I stop Mac OS X from resetting proxy settings every time it reboots

    I have an issue I have been working on for a few weeks now.  We have several Mac Pros that connect to a Windows network.  We use an automatic proxy pac file from the proxy service.  I can change the settings in the network control panel, and in the browsers, even as the root ID in hopes it would hold and affect all of the users that may login.  But every time the Mac Pro reboots, the settings are reverted to the previous setting.
    I have tried setting up a fresh new location in the network control panel, but that has not helped.
    I am still learning Mac OS X and I have not figured this one out yet.
    Anyone have any ideas on how to set a proxy setting and have it apply to all the users that will login to our new settings?
    Thanks in advance.

    There are multiple ways to configure the proxy settings on a Mac it sounds like your trying to do it manually. All the places I have been that have used a proxy server have used the "Auto Proxy Discovery" method and this has worked fine. This will work fine for multiple user accounts on multiple Macs.
    For those unaware "Auto Proxy Discovery" uses WPAD (Windows Proxy Auto-Discovery) protocol. This means it either 'learns' the address to download a PAC file from via DHCP option code 252 (preferred), or if it cannot get that address via DHCP it tries using the DNS method.
    All the Mac web-browsers use the proxy settings learned via System Preferences -> Network -> Advanced -> Proxies however some other software particularly command-line tools may need configuring individually. For example curl needs to be told separately.

Maybe you are looking for

  • Windows XP installation on Satellite L300 11G

    Hello, I have a problem installing windows XP on my Toshiba Satellite L300 11G. It does not recognize the SATA HDD. SO I downloaded the files that were needed (Intel Storage....) and then I get an error: iaStor is corrupted. I am pretty new in comput

  • Windows 7 64-bit problems

    Hi all. I'm aware that this is a fairly prominent problem and, reading around, I have seen that some people have been able to resolve this particular issue. I am having problems however, and cannot aptly describe the sheer frustration I am feeling. R

  • With ADOBE READER 10.1.2 I have problem to print 2-side of paper

    With ADOBE READER 10.1.2 I have problem to print 2-side of paper. The same document(s) print correctly with option 1-side. With option 2-side it print only last page, aditionally without any adjustement, just cut a half of last line. Even I want to r

  • Can we create export dump files on client side??

    Hi, Please see this link http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_overview.htm#i1010293 Check the "NOTE" which says that All Data Pump Export and Import processing, including the reading and writing of dump files, is done

  • How to make BI 7.0 workbook available in analyzer

    Hello, I need your help on this: Basis transported my workbook including its role from 3.5 prod system to 7.0 prod system(due to our upgrade from 3.5 to 7.0). I am able to see my workbook in the transport connection in 7.0 but it is not in the analyz