Syncing a project in QA...

The SolMan project creates its own IMG (say Project A), but I have replaced this with an existing IMG (Project B) on the dev system.
Now I add a QA system in the SolMan landscape. How does one ensure that Project B would get synced on the QA system.
In fact, using SOLAR_PORJECT_ADMIN and then going to System Landscapes > IMG Projects, the IMGs shown under Development System and Quality Assurance System are different.
Development System shows Project B ( the replaced one from the dev system) and the Quality Assurance System shows Project A (the original IMG created by SolMan).
This seems to be a strange situation, but the IMG was already created on the dev and Sol Man introduced later into the landscape.
Any suggestions, ideas, comments are welcome ...

Thanks Prakhar.. appreciate your quick response.
I had already transported Project B from dev to quality and had done the replacement in the same way that you have just suggested (replacing Project A by Proejct B in SolMan).
However, I am not sure if this arrangement will ensure that the dev and QA are always in sync. What has you experience been so far on this? Or point to any links on sdn, smp etc.?

Similar Messages

Project Server 2010 / Sharepoint 2010 Permissions not syncing to Project Site

Project Permissions not syncing to Project Site
Project Manager Group
New project is created and published project server sends permissions to Sharepoint which puts users into the following groups:
<dir><dir></dir></dir><dir><dir>
Web Administrator (Microsoft Project Server)
Project Managers (Microsoft Project Server)
Team members (Microsoft Project Server)
Readers (Microsoft Project Server)
At this time the creator/owner, owner’s management, portfolio managers, and executives should all have Project Manager rights on the sharepoint site, and Admins will have Web Admin permissions.
Issue #1: Only the Web Admin permissions and creator/owner permissions are being added to the Sharepoint permission groups
Workaround #1: Going into the project site permissions and adding the
Project Managers (Microsoft Project Server) group manually and the sync will keep the permissions
Workaround #2: Going into the Server Settings, Manager Groups then removing or add all users to the No Permission Group, which forces an sync to all workspaces. Con: This workaround can only be down at night when users are not active since it will
block the queue for at least an hour.
Project Owner Transfer
Previously created project has owner change, once saved and published project server sends permissions to update user’s permission to
Project Managers (Microsoft Project Server) on Sharepoint project site.
Issue #2: When Project owner is changed and project is published the owner is not getting permissions to the Sharepoint project site. However, if owner is also added to the team using the Build Team Feature the sync will give the owner Project
Manager permissions on the Project Site.
Workaround #1: Going into Server Settings, Project Sites, select project and Synchronize. Once this is done, the owner will have Project Manager Permissions without being added to the team.
Users who have been added to this project in Project Server 2010, but not assigned to tasks. Users who have assignments in this project in Project Server 2010 and are contributors to the project workspace site,
meaning that they can create and edit documents, issues, and risks. Users who have published this project or who have
Save Project permission in Project Web App and are contributors to the project workspace site, meaning that they can create and edit documents, issues, and risks. Users who have
Manage SharePoint Foundation permission in Project Web App and are contributors to the project workspace site, meaning that they can create and edit documents, issues, and risks.</dir></dir>

By default when you create project build team add users in the task and publish the project plan then All the User which are available in the project plan including Project owner will go to below mentioned group in project site:
1. creator/owner, owner’s management, portfolio managers, and executives should all have Project Manager will get access to Project Managers (Microsoft Project Server)
2. User who are having team member access to PWA will get Team members (Microsoft Project Server) access if they are assigned to the project task.
3. User who are having team member access to PWA will get Readers (Microsoft Project Server) access if they are not assigned to the project task.
4. Only PWA Administrator will get the access to Web Administrator (Microsoft Project Server)
Sharepoint permission you have to use when you want to give permission manually to users on project site
In the Project Site provisioning setting under Server setting if you have Check to automatically synchronize Project Web App users with Project Sites when they are created, when project managers publish projects, and when user permissions change in Project
Server.
Then all the user get access as per describe above and if you will give access manually to any of the user either in project server group or in Sharepoint group once you will publish the project next time all the manually given permission will go away.
IF you want to give permission to user manually to sharepoint group or project server group then uncheck automatically synchronize Project Web App users with Project Sites when they are created, when project managers publish projects, and when user permissions
change in Project Server.
You check PWA site setting --> Site permission then member of Sharepoint group user who will have access to sharepoint group in PWA site setting site permission will have access to all the project site sharepoint group as Project site inherit permission
from PWA root site.
Both the issue which you have described is behavior of project site.
For issue 2 when first time project owner create and publish the project and projectsite is getting created then porject owner name gets access in the porject manager (project server group) nect time if you will change the owner and publish the project
until he will not present in the project plan will not get the permission.
If you want to give sharepoint permission to users then uncheck automatically synchronize Project Web App users with Project Sites when they are created, when project managers publish projects, and when user permissions change in Project Server and give
the permission manually.
Project site in 2010 has some issue and not full filling customer need some time ,Ms has came up with 2013 which is having tight integration with project sites .
Project workspace security groups are equal to the SharePoint Server 2010 security groups.
Web Administrator equals Full Control
Project Managers equals Design
Team members equals Contribute
Readers equals Read
Users who have Manage
SharePoint Foundation permission in Project Web App and are contributors to the project workspace site, meaning that they can
create and edit documents, issues, and risks will get access to Web Administrator (Microsoft Project Server)
http://technet.microsoft.com/en-us/library/cc197668(v=office.14).aspx
kirtesh

Sync GarageBand projects across school iPads

I'm a music teacher in an elementary school that just purchased 50 iPads to use in the classrooms. I have a lot of ideas for music projects, but there is one concern I have regarding the use of Garageband.
I would like to use GarageBand to compose songs over the course of many classes. At the moment, I'm planning on talking to the IT guy so that I may reserve the same 5 iPads every week, and each group can continue working on their locally saved project each week. The problem with this is if another teacher grabs one of those iPad before me or something happens to it, then one group won't be able to continue working.
Is there a way to sync a project to the cloud or export it so that I can grab any of the schools iPads each week and be able to access/import the projects regardless of which iPad they were working on the week before.
As these are school iPads, their functionality is a bit limited. But the IT guy is open to suggestions. Any ideas on how to organize this?
Thank you!

Thanks for your response. I had tried this before but thought it wasn't working. On the master image I had created a web clip and placed it on the iPad dock and then restored via backup to a new iPad. The web clip on the new iPad was not placed on the dock. Not a big deal, at least all the apps are organized correctly. Thank you.

How to sync garageband projects from mac to iPad and vice versa

how can I sync garageband projects from iPad to MAC and vice versa

Hi Marko,
Please send your .muse file to [email protected] Add link to this forum post and refer it to me. I'll investigate the issue.
Also, please send the file you created on MAC.
Regards,
Aish

Sync Entourage Projects between computers?

I'm running OS 10.4.8 and Entourage 11.2.5 and I'd like to be able to sync/share the Entourage Projects I create with my laptop. I haven't seen any specific instructions on how to do this.
I have a .Mac account, too. I know that might come in handy.
iBook G4 Mac OS X (10.4.8) Power Mac G5

Welcome to Apple Discussions.
I do not believe that sort of synchronization is currently supported with Entourage under the Sync Services framework, but one of these two links should send you in the right direction…
This is a link to an overview of Entourage and Sync Services:
http://www.microsoft.com/mac/products/entourage2004/using.aspx?pid=usingentourag e2004&type=howto&article=/mac/library/howto_articles/office2004/ensyncservices.xml
Here is a link to an area where specific issues regarding Entourage synchronization are addressed:
http://www.entourage.mvps.org/faqtopic/syncservices.html

A/V synced in project, but not upon rendering, CS3

Unfortunately, I'm still using CS3. Can't afford to upgrade yet.
Anyway, I have a mid-level computer system. I've got a video project that I did a couple years ago which is sort of like a music video in that I had to sync a lot of the video motions very carefully (to the frame) to look appropriate with the audio bed track. After the project was put together (in Premiere 7.0) and rendered, the project played perfectly in sync. I exported it at the time to a movie format (I think mpeg, if I remember correctly), and submitted the project, and everything was good. Still perfectly in sync. It even went up on YouTube and got several thousand views, and is still synced fine as a streamed video.
Anyway, I wanted to re-encode the video at a higher quality, so I imported the project into CS3, which converted it with no problems. I re-rendered in the computer, and everything is still in sync. However, I tried exporting and the finished product is NOT in sync anymore. Two other projects that I did at the same time, with the same settings, did not exhibit this problem. The only significant difference that I can see between this project and the one a few years ago is that I am currently trying to export as a .MOV using H264. I would have figured that would be the problem, except that the other two videos that I just exported to the same format did NOT experience the un-syncing.
Very confused, would appreciate any thoughts. I'm currently trying to export into a variety of other formats to see if I can get any to work and stay properly synced.

Hey, that WAS pretty quick!
Now, I just hope that one of the other H.264 CODEC's works as well for you, as they have for many others.
Good luck,
Hunt

Aperture not syncing all projects with ipod

I've got an Ipod touch 3rd gen and am syncing it with Aperture. I choose the option to have projects from the last 12 months, but it's not syncing them all. Seems to be a somewhat random selection, but particularly missing more recent projects. Any idea why this is happening?

Hello,
When you connect your iPod and select in the "Photos" tab what to sync, what do you see?
Do the projects that do not sync appear in the "Projects and Albums" section and just do not sync, even if you enabled them?
Or are they not visible at all, even if you set the selector to "selected projects and albums"?
If they are visible, but do not sync properly,you better ask in the iPod Touch forum, maybe your iPod needs troube shooting, but if not all Aperture projects are showing in the "projects and Albums" section, then check your Aperture Preferences -> Previews: maybe your recent projects need Previews to be build.
Have you set Aperture to always share previews and to automatically build Previews for new projects?
Rebuild the Previews for the missing projects by selecting all images in them, ctrl click the selection, hold down the option-key, and select: Generate Previews.
Quit Aperture.
If you do not see your new projects in iTunes, even after rebuilding the Previews, you may need to trouble shoot your Aperture Library: Repair the Permission, and if necessary, repair the Library using the "First Aid" as described here:
Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
Regards
Léonie

Syncing a project between two computers

I just got a new MacBook which I use when I travel every week. I have a project that I started at home on my 24" iMac. When I'm at home I would like to continue using the iMac because of the big screen. However I would still like to work on the project when I have time on the road.
So the question is "Is is possible to copy / sync a whole project with clips between two computers and be able to go back and forth between the computers?" I realize I might have to copy the whole file.
Better yet is there a way to keep the project on an external drive and use iMovie on each computer to open up and work on the project.
Thanks,
Alan

Yes this is possible.
First, make sure your external drive is formatted as MacOS (journalled) or HFS+ (journalled)
Go into iMovie and from the Project list, drag your project to the External Drive by dragging the project name to the icon for the external drive in the project list in iMovie.
Now select File/Consolidate Media and choose Move (not copy). Everything will be consolidated to the external drive where the project is. You can open it on another Mac.
See the iMovie Help for further details.

Audio/midi out of sync when project moved from different computers

i work on logic with both my imac and macbook. when i move project x from one to the other machine (in either direction) the audio and midi get out of sync. as i do not do things to the grid, i can't specify how far things are going out of wack. recording delay settings are the same, as are those for buffer size, etc. I am using a Duet interface with both machines.
any help is greatly appreciated!

Hi,
Have had the same problem but with Powerpoint. All I could imagine is that this problem has something to do with the difference of the internal speed of the Imac and MacBook Pro. Solution: nothing but always working on the same machine (for me).
PeKes

Audio/video out of sync on project, raw okay

Okay, I have a project where the Audio and video get out of sync in cs5, but the original file is just fine.
So, my file is an mpeg 1440/1080 4 hour 40 minute, 53Meg file. When I preview it in a viewer like media player, it plays perfect, no video/audio
sync issues.
But, with this file in a Pro CS5 project, the video/audio lose sync. I have found this has messed up a lot of my final products which I had not seen.
So, any ideas?

Have you installed the recent updates?
There was a bug fix in a recent update for audio/video synchronization issues. The bug was in the indexing and conforming phase, so you would need to clear the media cache and re-index the assets for the fix to take effect.

Is it possible to Sync logic projects between two computers?

Hi All,
I've never had to do this before, but now I have two Macs running Logic Pro (X). As stated above, how would I go about syncing projects? I use Dropbox to sync some data from apps back and forth, and it works pretty well, but that seems impractical with the large file sizes. (Not that I've written it out, but I'm just sayin...) There's no iCloud support, right? Okay, and if this a repeat question, my apologies.

If the two Macs are on the same network.. Use a shared network drive to store and access everything?
There is no iCloud support.. I'm guessing simply because of the size of files that would be stored up there.. which would in essence, have the same issues as using Dropbox would..

Is it Possible to Sync Certain Projects Between Macs?

It would be very helpful if my wife and I could synchronize certain Aperture projects (not our entire Aperture libraries) between the Aperture libraries on several Macs. Is this possible? We both use the .aplibrary scheme to store our photos.
Thanks!

Hi David,
Aperture is a single-user application, designed to be used by one person in one place at one time. It provides no multi-user functions, nor is there any automatic way to sync Libraries for use in different locations.
There are work-arounds involving exporting and importing/merging, or putting the shared Projects on a Library on a (literally) shared disk that only one of you opens at any time. That's it, afaik.
You can add your voice to the chorus asking for some sharing/syncing via "Aperture➞Provide Aperture Feedback".

IMovie on iPad won't sync the projects shared on iTunes?

iMovie on iPad wont recognise shared projects on iTunes

iMovie Mac and iMovie iOS are not the same.
There is some confusion here, but they are not compatible as far as projects go.
You can only transfer iOS projects, not Desktop to iOS or vise-versa.
If you are trying to share a video then it's a bit hit and miss if it will work.
I have found encoding video in the same format as the video taken with my iPhone is able to be edited in iMovie iOS.
But essentially iMovie iOS is really only a quick simple editor for video shot on your device.
Apple does have an iapp return policy if you bought it but can't use it.
Try
https://expresslane.apple.com/

Pls help! Audio out of sync - PAL project

Hi,
I have run into the annoying audio out of synch problem
I have a PAL project put together in FCP HD 4.5 and exported as "mpeg1 dvd - all" in compressor.
By the end of the 15 minute project the audio is out of synch by more than 1 second (25 frames or more).
I really need to get this project burned tonight so I guess I have 2 questions....
Given what I already own, (Production Suite), what steps do I need to do to get this project finished tonight - ie compressor settings, fiddling etc etc
And secondly, what do I need to do to properly fix this bug - for it IS a bug - so I don't run into it again.
Many thanks for all you help in advance.
Kenny
kennymillar-at-mac-dot-remove-this-bit-dot-com

I used compressor to export as MPEG2 (I chose MPEG 2 High Quality 60 Minute) and it created an aiff file, which is also out of synch at the end of the project by more than 1 second.
So that didn't work
Please someone give the guys at Apple a shake and ask them to get this fixed.
in the meantime, can someone please help me achieve this simple task.

When syncing Aperture projects/albums to an iOS device, are the original files synced or are they the previews?

My concern is that sincing the original RAW files will eat up the space on my iPhone quickly.
So what size/quality are the photos from Aperture synced to my iPhone (or iOS device)
Thanks in advance.

Are you asking about syncing using iTunes?
iTunes will sync jpeg previews images to your iOS devices, that are reduced in size. It creates a cache inside your photo libraries - the iPod Photo Cache.
See: iTunes: Understanding the iPod Photo Cache folder
or: Syncing photos using iTunes
If you want to have the original raw photos on your iDevices, upload them using the Photo Stream; that supports a variety of other formats ( JPEG, TIFF, PNG, and most RAW photo formats).
http://support.apple.com/kb/HT4486

Syncing a project in QA...

Similar Messages

Maybe you are looking for