Syncing albums into nano-must I make a playlist?

I have just finished downloading ALL of my CDs into my Mac (about 100 of them). Obviously with an auto sync, the entire library went into my nano. It fits but...
Can I sync just one CD at a time? Or must I make a playlist out of each CD then sync the playlists manually?
I see how to sync all songs. I see how to sync individual songs. I see how to sync playlists...but I can't see how to sync one CD from the library without making a playlist?
Also, if I sync all music (1286 songs) and most recently added (again 1286 songs) does that mean over 2500 songs just went in my nano? It seems so.
If so, do I just delete that playlist from my nano?
I am struggling a little with some basic organizing skills!

If you sync all songs and also a playlist, you will only get the songs once each. The playlist just "references" the tracks on your iPod. So, no, you didn't sync twice as many songs as you have! You synced all your songs, plus a playlist that is just an ordering of the tracks on the iPod. You could sync 500 playlists and you'd still only end up with 1 copy of each song on your iPod. Hopefully that made sense!
Regarding adding just one CD. It depends on what you are asking. If you import another CD into iTunes, then the next time you sync, iTunes will copy that album to your iPod since you are syncing all songs. Until you fill up your iPod, you don't have to worry about it - it's all automatic.
Now, if and when you run out of space and need to pick and choose, then you have several options, but most people are probably best off creating a playlist that contains the songs/cds you want to have copied to your iPod, and then sync only that playlist. Note that when you are looking at the playlist, at the bottom of the iTunes window it will show you how much space the tracks take up. So you can estimate how much will fit. Give yourself some breathing room. If it doesn't all fit, iTunes will tell you that (and will also tell you how much over you were) when you try to sync and offer to sync a selection (random) of the tracks in the list, or to cancel the sync. You can either let it do that, or cancel and then pair down the playlist and then sync again, repeat until you get it small enough.
Another approach is to create a smart playlist which, for example, has 7 GB (or some number of GB) of music that was most recently added. I use a combination. I have a playlist like that, and then I also have a normal playlist in which I have albums I always want on my iPod. I sync both of those to my iPod. This way I always have the latest stuff I've added to my library, but I also have my favorites even if they were added a long time ago.
Another approach is to manually manage the music on your iPod. In that case you drag and drop tracks to and from your iPod. That's good, but it does have some downsides to it too. I'm not going to go into that here. I don't like manual management, but other people do. Once you get to the point that you've filled your iPod, then you can look into that.

Similar Messages

  • TS1425 purchased the new Muse album last week, put into nano but since then it wont work in my car through the cars system, it shows menus on the car screen but no sound

    loaded newly purchased Muse album into Nano and since then my nano wont play in my car, the cars screen lists album and track details but there is no sound?

    Did it used to work previously?  Have you tried resetting teh Nano to see if that helps?
    How to reset iPod
    B-rock

  • Ipod makes 1 album into 2.

    Just got an iPod Touch yesterday and it's great so far.
    But now I have a problem, I have the Born in 69 album by Bob Sinclar and in iTunes it looks fine.
    But when I transfer it to my iPod it splits the album into 2 albums with #7 in one of them and the rest in the other. Why is this happening.
    Thanks in advance!

    Check the spelling of the artist name and the name of the album. The grouping is case sensitive and it will also take into consideration spaces. Try selecting the entire album in iTunes, right click, 'Get Info' and under the info page retype the Album name. This should set all tracks with the same album name. Also, under info check 'Album Artist' to make sure it is blank or at least the same for all tracks.

  • How do I Merge 2 Albums into one and make CD 1&2

    ive tried everything followed other forums that had the same question they just wont merge. if i could insert a video on here to show but it wont let me the icon isnt shaded in and when i press it it wont respond.
    ive tried everything that was posted on this forum
    https://discussions.apple.com/thread/5046421

    you kind of solved my question but i didnt really understand it because of the wording but heres a better way of explaining that i found on a different forum
    i added an x to both albums artist and that didnt work
    then i added an x to both albums artist and album and it grouped
    Sometimes iTunes may split an album into one or more partial albums. This split may happen if some tracks from the album have different values for Artist, Album Artist (ignored on iPod), Album, No. of Discs. or Part of a Compilation. Tiny differences such as trailing spaces, accented characters, or variants of symbols can be quite hard to spot. Normally overtyping the desired value for each shared field will complete the grouping of the album into one entity. Occasionally, however, this method seems to fail. In this instance I've found that you can force every field to update properly by adding some extra text - e.g. a trailing X, which once applied seems to complete the joining of the tracks into one album. Once this has happened the extra data can be removed and the album should remain properly grouped.
    https://discussions.apple.com/thread/1670662

  • I downloaded a movie into my library and now it will not sync to my nano

    I download a movie to the library and it will not sync to the nano..any suggestions??

    I have tjis problem also, check your ipood to see how many GBs it has left, then check the movie's ammount of GBs/MB and see if you dont have eneough or something, but if that doesnt work, idk. tell me if it works or if u found another way1 thanks!

  • I want to create a playlist on an old iPod Nano (I think it's from the second generation), but the computer it was originally linked to via iTunes died years ago.  How can I make a playlist out of existing songs on the iPod?

    Hello there,
    I have an old iPod nano which I think is from the second generation (model number A1199 if that helps) with software at the latest version it can accept, 1.1.3.  I wish to make a playlist out of the songs currently on the iPod, but I can't see any easy way to do that from the iPod itself.  The next logical thought is to do it through iTunes, but the iTunes that was originally synced to the iPod died several years ago now, so I can't access that to make a playlist through (it's a very old iPod).  I do have iTunes currently on this computer, but that's synced with my iPhone and stores different songs which I don't want to be mixed with those from the old iPod (due to the mostly nostalgic nature of the iPod songs).  Is there any way I can either create a new playlist from the iPod itself, or through iTunes without having to sync?  Also note that most of the songs on the old iPod were uploaded to iTunes from CDs and so aren't connected with any iTunes Login.
    Thanks for any help you can give.  Also, I sorta need to create this playlist ASAP so any advice you could give would be much appreciated
    ~Imamadmad

    The old iTunes library was lost with the old PC.  However, it all that music and content is still on your iPod there are many ways you can extract this content from the iPod and import it back into iTunes.
    Your iPod is designed to sync with only one iTunes library at a time.  It will recognize the iTunes library on the new PC as a new library.  If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library.  So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Question about syncing albums with Facebook

    I have Aperture set up so I can publish albums to my FB account.  However, everytime I open Aperture and it goes to sync with FaceBook, it copies all my photos I have on Facebook that I don't have in Aperture into my library.  For example, all the pictures in my Cover Photos album in FB get copied into my library.  Is there a way to prevent this from happening?  Is there a way to make Aperture not copy of sync with 1 particualer album on FB, or to make it so I can publish photos from Aperture to FB, but not have photos from FB get copied into Aperture?

    Try unchecking the "Automatically check for newly published albums" setting in Preferences. In Aperture preferenced, click the Web pane and select the Facebook item in the Accounts list on the left first.

  • I sync my iPad. Now everything is messed up playlists and music are gone. Weird stuff showed up. And now I can't find the option to delete or make new playlists. 6.1.2 is my newest version!! NEED HELP!!

    So I don't sync my iPad very often. My dad and I share a computer. And I decided to do it the other day. I am pretty sure I did it all correctly selecting music that I wanted not deleting playlists but it seems to be that they are gone. And music I didn't want has appeared. And now I don't have an option (with this new iOS 6.1.2) to make new playlists or edit music I don't want out.
    I know I need help figuring those two things out 1 how to make a play list. There isn't a "add" button anymore in that screen I have a "you have no playlist"with a button underneath that says "go to iTunes Store" why I would need the store for that, I do not know.
    Then in the songs, artists, albums sections where you used to be able to hit "edit" button to delete the music you have that you don't want. I don't seem to be able to do anything at all to get rid of the random music I have.
    I need help. I know my iPad fairly well but I am not super savvy with it either.

    Is there a "New" button at the top right of the Playlists section of Music?
    There is no Edit button to delete music, swipe sideways on the song to reveal the delete button. Tap and hold on the artwork in Artists and albums to reveal the (X) button to delete. Or connect the iPad back up to iTunes on the computer and check your sync settings for music to ensure you are syncing the right content.

  • How do I get photos in a specific iPhoto Album into my Photo Stream?

    How do I get photos in a specific iPhoto album into My Photo Stream so that I can use my Apple TV to show them in a slideshow on my TV?

    That is not possible - PhotoStream has no organizational capability - no albums or other organization
    With the correct software versions You can import from PS into an iPhoto event on your Mac either automatically (by setting the iPhoto preference to do that) or manually and then you can add the photos ot an iPhoto album and sync to Apple TV
    what version of iPhoto do you have? Is OS X 10.7.5 correct for your OS?
    LN

  • How do I put all the songs from a compilation album into the same /album/folder in Itunes v12

    How do I put all the songs from a compilation album into the same /album/folder in Itunes v12 i know in other versions it was via get info but as all of the tunes have the same album title , I am not sure what tio change to achieve this ?

    I don't see your screenshot but I assume you're starting with something like this, i.e., the compilation split into multiple albums:
    If you select all the items that you want to be in a single album, right-click > Get Info you'll see this:
    As you say, in iTunes 12 you don't see a field to enter a distinct Album Artist value.  You can, however, address this by clicking the Add Field button and selecting Album Artist:
    That makes the field available in the metadata dialog so that you can enter the required value:
    You can also show the pre-iTunes 12 version of the dialog by holding the SHIFT key when selecting Get Info - this allows you to enter the Album Artist directly:

  • I have a nano 5th gen bought new. I no longer have the computer that I registered it w and created music library on. I want to allow my new computer and itunes to sync w my nano w/o losing the music on it. When I try it tells me i

    I have a nano 5th gen which I bought new. I no longer have the computer that I sync'd it with and created library on. I have new computer and Itunes library which I want to sync w my nano and songs on it. When I try it tells me I will loose all the songs on my nano bc Im already sync'd on a dif library. How do I keep from loosing all my songs?

    Your iPod is designed to sync with only one iTunes library at a time.  If you try to sync it with a new or different iTunes library, it will erase what is currently on the iPod and replace it with what is in the new library.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Can you sort multiple albums into one single album....?

    So my situation is like this...
    I have multiple albums from one specific Band (in this case its music from Shin Megami Persona.) I have all 8 albums sorted separately in Itunes. When it is sync'd to my Iphone it will show all of them in order which is typical. What I am curious about is if I can put the Albums into one Album name and when I click it, it will then show the 8 albums. Basically, this is for the sake of not having a lengthy album list on the iphone.
    If my question/explanation was unclear, maybe this might help.
    My current Album list looks like this:
    Albums- P
    Paramore
    Persona Reincarnation
    Persona 3 OST
    Persona 4 OST
    Persona 3 FES OST
    Persona 3 Portable OST
    Persona Music Live 2008
    Persona Music Live 2009
    Persona Music Live Band
    Pink Floyd Greatest Hits
    ect... ect...
    What I would like is for it to be like this:
    Album-P
    Paramore
    Persona Sountracks <------ click on this
    Pinkfloyd Greatest Hits
    ect...ect...
    Clicking leads to below
    Persona Soundtracks:
    Persona Reincarnation
    Persona 3 OST
    Persona 4 OST
    Persona 3 FES OST
    Persona 3 Portable OST
    Persona Music Live 2008
    Persona Music Live 2009
    Persona Music Live Band
    I've been able group them all together by changing them all to the same album name but it just leads to a extremely lengthy list of songs. So if there is anyway to sort by the way I explained above, I am open for suggestions. Thanks!!!1!1!1!1

    Thanks. That was very easy and works perfectly. Do you know if I can get my 08 edited footage back into 06 for some additional editing without exporting as a Quicktime movie that I can't edit? I want to add audio tracks that I can edit in synch with my video footage like I can in 06. Thanks!

  • Combining all classical albums into one folder

    can i combine my 11 classical albums into one folder or category to remove clutter in my music library?

    mark4440,
    As a general rule, once music is in your iTunes library, it is best not to rename or move any of their files or folders. iTunes loses track of the files when you do that.
    As noted from time to time on this forum, the basic iTunes structure of album/artist/song does not really suit classical music that well. Many folks like to edit the artist field to include the composer so that they can see the composer on the iPod.
    Does your library include non-classical as well as classical music? If so, make sure you have filled out the "genre" for each of your classical pieces. To do that, right-click on the song, "Get Info," select the genre field, then "OK.". Also make sure that Genre is visible in your iTunes music view (View > Options if you need to adjust). You can also create a smart playlist, keying on genre, that includes only your classical music.
    Ed

  • I want to sync data into an app.how to do so?

    i want to sync data into an app.how to do so?

    For example: Import PDFs to your iPod. The "Adobe Reader" app must be installed and the iDevice must be connected to iTunes.
    @ ishan anthony In the "iPod" tab go to Apps and then click Open. Select your file (must be compatible with the app" and click Copy. No syncing, nothing. File will be just copied.

  • Is it possible to incorporate old photo albums into a Web Gallery?

    I created 9 photo albums with the first iteration of iWeb. Now I'm using iWeb '08 and have been consistently adding new photos to an existing Web Gallery via iPhoto. But I'd like to import or add those older albums into the Web Gallery.
    Looking for answers...

    Perhaps it would be better to just direct you to what I'm talking about.
    Here is a URL to the site I maintain for our family photos and movies:
    http://www.Derners.ws
    Along the top you will see navigation links to Web Galleries, Photo Albums and Movies. The Web Galleries were created as a result of iWeb 2.0 and the overall inclusion of the Web Gallery feature with iLife '08.
    The Photo Albums and Movies however, were created back in iWeb 1. These are still online as standalone pages. What my original question alludes to are these Photo Albums. I want to pull the content of the Photo Albums and incorporate it into my Web Galleries, thereby having all of it in one place. So when I complete this process a visitor who browses Derners.ws will go directly to the Web Galleries. No more "Photo Albums", no more "Movies". Just one stop for viewing everything.
    Does that make sense?

Maybe you are looking for

  • Error message in the report

    Hi When i execute my report am getting the error message as ""gw_data-NAFAP" must be a character-type data object (data type C, N,D, T or STRING). field string)."           What is the reason for it and how to correct it. I have declared in the inter

  • My IPad is loosing battery life fast and I have shut down my apps

    My IPad is loosing battery power fast and I have turned off all apps I am not using

  • Interpreting crash logs

    Mac Pro Early 2008, OS X 10.8.5, 12 GB 800 MHz DDR2, ATI Radeon HD 2600 XT 256 MB Crashing with increasing frequency, link to Firefox/Safari?  I will be reading a web page, especially any page with embedded video, e.g. follow a link on cnn.com, sudde

  • Maintainence view for HRHAP_APPER

    Is it possible to create a maintainence view for this table  - HRHAP_APPER ? After creating one , I need to asign a custom tcode (z tcode )  to the view . Thanks, Nitu Kumari

  • FCE viewer does not play smoothly when dragging play head manually.

    Any settings I need to be able to scroll through clips in the viewer without it skipping frames? Rendered clips are fine on the canvass. Thanks Greg