Syncing and Clock Settings/Adjustment
Hi Everyone
I don't know if any of you do that, but I have the habit to moving my clock forward to make sure I'm on time.
All my clocks show a different time ( macbook +15 mn, Iphone +20mn )
I know it's a bit silly,but it helps me to be on time.
However it becomes a problem when all the sudden the Iphone shows the same time as my laptop.
It first happened after I sync, then I made sure to turn Off the Automatic Date and Time on the Iphone.
(General /Datre Time /Set Automatically OFF)
But When I recently upgraded to IOS 6, out of nowhere it adjusted to the laptop clock settings, althought the Iphone was still set to OFF.
What do you think causes that?
How Can I avoid it?
is it ueo to IOS upgrade?
Thanks for your help
David
Hi, Gothboy -
If the PMU reset that Tom suggests does not fix the problem, then try a reset of NVRAM -
- Start the computer and immediately hold down Command-Option-O-F
- When the computer starts it should open into a prompt screen (Open Firmware).
- Press Return, you will see OK.
- Type reset-nvram include the dash, here and below.
- Press Return
- Type set-defaults
- Press Return
- Type reset-all
- Press Return
The system should restart. If not, try typing exit or shutdown, or you can manually restart the system.
Note - some machines may return "unknown word" in response to the reset-nvram instruction; if that happens, try init-nvram instead.
Similar Messages
-
Ok
my setting for my mail accounts are the same on my mbp and my 4S
How come when I sync, the settings on the 4s changes ?It sounds like you might have two Apple IDs (maybe one for @me and one for iTunes with a different email?). Log out of iCloud and log in using your @me address that you already have.
-
Mobile Sync and Language Settings
Every one in our houshold uses mobile accounts on a few computers. No matter which computer you take, you can login with your server account. These are not network accounts, but mobile accounts with portable home directories (PHD) (so you can take the macbook with you) and they are synchronized with the server. My kids use the Dutch langauge for their OS interface. I manage everyone's preferences for mobility.
I found out the following: if you (for instance) add ~/Music to the skip list for home sync (so it all stays on one system), it turns out it does not work. I have to type that as ~/Muziek (Dutch word for Music). Hence: if a user of mine changes language settings he or she circumvents the managed preferences on this point. I find this completely unexpected. I would have thought that this would have been implemented at the unix level.
Ugh. I can understand the difficulties involved (e.g. translating a regex from one language to another is a no-go), but at least the language setting could have been well integrated with managing settings.
At least I would like to set the language for a user then, so I can control which interface language is used (and adapt the PHD rules accordingly). But I haven't been able to find a setting for that. Probably I have to set it once and after that manage acces too language in System Preferences? Is there a better way?I always like to back things up to an external hard drive though. Get a western digital external 1tb hard drive for 50 bucks online. Great thing to have. You can store all music and movies on there and free up that space on your computer so it runs smoother
-
How do I transfer my MacBook Air to my wife so she can sync her iTunes account and other settings with her iPad Mini?
You can change the account shortname to whatever you wish to use.
As you can see from my example above. Once you click on the Create User button a new account will be created.
She will need to get her own Apple ID setup so when she starts with iTunes she can open her own iTunes account unless you both want to share the use of the same Apple ID. This can create a bit of confusion if you have your own iPads or iPhones or iPods. As you have discovered it's pretty much one iDevice with one Apple ID.
As for the iTunes library that becomes a more complicated issue. -
Is there a way to sync the FF settings and keep them on a thumb drive for temporary use? I know you can try to copy the "default" folder in .mozilla, but that usually ends up a mess. The home computer runs on Linux, don't know what the borrowed one will be.
There's Portable Firefox for Windows - http://portableapps.com/apps/internet/firefox_portable - and another for Macs - http://www.freesmug.org/portableapps/firefox/ - not for Linux, AFAIK.
Firefox Sync works thru a server, either Mozilla's sync server or a local sync server the user has running on their own LAN. There's no way to sync the data to a thumb drive unless it has a version of Firefox on that thumb drive.
You didn't mention which "settings" are involved, but you can export your Firefox bookmarks in HTML format to a thumb drive, and view that bookmarks.html file on any web browser on just about any operating system.
Bookmarks > Show All Bookmarks ''(or Organize Bookmarks for 3.6 and earlier versions)''-> Import & Backup - Export HTML...
For your other personal data in Firefox, there is no real solution outside of using Firefox. -
Clock and date settings are not saved
clock and date settings are not saved in lion
I'd give AppleCare a call.
AppleCare Support Phone Number: 1-800-275-2273
open 6am to 6pm Pacific Time
International Technical Support Numbers
http://www.apple.com/support/contact/phone_contacts.html
You may want to look under date & time and set the clock from the internet. At least you will have the correct time after a while.
RObert -
Trouble with clock and date settings
Hi Folks,
Every time I start my G5 I get a message telling me to set the clock and date settings. I set them as requested and save them and put the little lock on them, but next time I start the computer the same message appears.
Would anybody be able to assist please?
Thanks in advance,
EddieYou might need a new battery. Go to http://support.apple.com/manuals/ and find your exact model - the manual should show you where it's located and which type you need to buy. They're not expensive.
-
Error: 0271: Real Time Clock Error - Check Date and Time settings.
Hello all,
I have lenovo T430s laptop that is configured with Bitlocker encruptions and TPM PIN entry. I don't think that has anything to do with the error msg I am getting but here it is. Error: 0271: Real Time Clock Error - Check Date and Time settings.
Press Esc to continue or F1 to enter setup. I am unable to get into BIOS or even the login screen for Windows 7.
Any advice would be appreciated.Thanks to everyone for the help. Just want to close this out. I had a IBM/Lenovo technician here today and he replaced the CMOS battery. Upon the change, the computer is fine being reconnected to the dock (the three times I tried it). So it has been resolved with the battery. Surprised by the incompatibility claim because I am not having issues now. Wondering if it's just a USB 2.0 vs. 3.0 thing (and Lenovo trying to sell more peripherals, of course).
Thanks! -
While syncing my iphone 4s, its saying unable to sync and restore to factory settings. But, My iphone 4s is factory unlocked. If I restore to factory settings will the iphone get locked to the carrier again.
vamsi Pothugunta wrote:
While syncing my iphone 4s, its saying unable to sync and restore to factory settings. But, My iphone 4s is factory unlocked. If I restore to factory settings will the iphone get locked to the carrier again.
It all depends on the definition of "factory unlocked". If the phone was purchased directly from Apple and the receipt says "Unlocked" then updating or restoring it will leave it unlocked (Apple never uses the term "factory unlocked" as there is no such thing; phones are unlocked at activation time). Similarly, if it had been locked to a carrier and the carrier authorized it to be unlocked, and you went through the unlocking steps they provided, it is permanently unlocked.
Unfortunately, a lot of the phones sold as "factory unlocked" were actually unlocked by hacking in the "factory" in the basement of some shop somewhere. These phones at best will become locked to the original carrier if restored, and in the worst case will be permanently disabled if restored. -
hi,
i cannot perform any syncs / back ups (including mobile me) on my imac other than old ipods.
i recieve this message
"An unknown error occurred while performing a sync operation. Please check your account and network settings, then try again".hi,
i cannot perform any syncs / back ups (including mobile me) on my imac other than old ipods.
i recieve this message
"An unknown error occurred while performing a sync operation. Please check your account and network settings, then try again". -
ICloud syncing Weather and Stocks settings
We are a family with multiple iPhones and have all upgraded to iOS5 and iCloud syncing. We have come across one odd thing, our phones now have a combination of the Stocks and Weather settings from all the phones. How can we de-couple these as we like having our individual settings?
Hi All, this worked for me.
In your iPhone/iPad, go to Settings > Privacy > Calendars ... check which Apps are accessing your Calendar - for e.g. if you use an AccuWeather app, when you first installed it, it would have asked for access to your Calendar ... if the the button is switched to "On" ... the weather app will post the temperatures (Min/Max) of the day in your Calendar.
- As the data appears in your Calendar, it's likely going to be replicated to everyone else's Calendar that you share an iCloud account with.
> Switching off the button in the Weather app, no temperatures appear in my Calendar.
- Do the same with the Stock app, switch the button to "Off", so it cannot access your Calendar/Contacts.
> In your iPhone/iPad, go to Settings > Privacy > Contacts ... check which Apps are accessing your Contacts ... turn off the ones you do no want the data fed into your Contacts.
Hope that helps.
Reply posted: 14Aug2014. -
Cannot adjust bass and treble settings.
I just installed the SoundBlaster Li've 24-bit sound card specifically so I could adjust the bass and treble settings under Advanced Options in speaker settings for a new job, but the bass and treble settings are greyed out. Can you tell me why this is? I have Windows XP.
Thanks,
DanielleI'm having the same problem -- I also have Win XP Home. So I'll be interested to hear of any suggestions for fixing this issue. Also, when I try to record voice using Windows Sound Recorder and play it back, the sound volume is very low and poor quality (yes the mic volume is turned up).
-
how come when I sync my 4th gen. nano it says its syncing and when its done i disconnect it and go into music and it says no songs then i go into settings and it says i have 1.0GB free but theres no videos, no music, nothing on the iPod
http://discussions.apple.com/docs/DOC-5142
-
When syncing iPhone with iTunes I get an iTunes stopped working and the network connection timed out message. I reinstalled iTunes and checked settings still no go.
Disable or turn off your firewall, anti-virus, and all security software and try the download again.
Stedman -
When i plug my ipod into my laptop, it comes up as a new ipod. It says it can't sync and wants me to restore it to its original factory settings but I don't want to because I will lose everything.
You have no choice but to restore the iPod. You can restore from backup if y have one.
To restore from backup see:
iOS: How to back up
Maybe you are looking for
-
The recent version of iTues 10.5 will not open ever since I restored my computer to an earlier time. A few days ago I got what looked like a trogan horse virus starting to take over my computer. What I have learned to do is to restore my computer to
-
I have two Apple ID's. How do I get rid of one?
I have two Apple ID's. One is my real Apple ID that I use for everything, and one I don't use and I don't know why it got created. How can I have the extraneous Apple ID deleted?
-
Mailbox Issues in New Databases in DAG
Ran across a strange problem after moving mailboxes into 2 new Databases in DAG. We have a 2 Server DAG that had 2 existing DBs. We created 3 additional DBs and planned on moving all MBs over to reclaim space from the older DBs. After moving 30 or so
-
From windows 7 laptop, "Insufficient access to connect to selected printer!
I am frustrated trying to setup printer sharing from Windows 7 laptop. Bonjour printer wizard keeps returning error message " You do not have sufficient access to your computer to connect to the selected printer" HELP PLEASE
-
How can I disable 1-click purchasing in the iTunes Store? Apple says to "reset warnings" in the Account Information section, but there is no indication there of this action's effect on 1-click. In fact, the Account Information section has no specific