Syncing Error after upgrading to iOS4

After my 3GS backs up for what seems like forever, I get "Syncing Error (-50). It seems to sync everything correctly except for my photographs. Nothing appears except "Camera Roll". I've had my iphone for a year and never had any issues until the iOS4

Delete the photo cache as described here:
http://support.apple.com/kb/TS1314

Similar Messages

Win7 Offline Files sync error after upgrade to Lion Server 10.7.2

Symptom: client is a Win7 laptop, the server is Mac OS X 10.7.3 Lion Server with SMB and AFP shares. Win7 Offline Files stopped working after I upgraded Snow Leopard (non-server version) to Lion Server 10.7.2. After updating to 10.7.3, the problem persists. When syncing, it gives thounsands of error like this: The process cannot access the file because it is being used by another process. WinXP clients are fine with the Offline Files function though.
I Googled and studied online for several days now and it might be related to the "Oppurtunistic Locking", or "Oplocks" for short, in the SMB protocol. Since Apple has re-written Samba, there's no "smb.conf" anymore to change the Oplocks setting. Maybe it's possible to change the setting in "com.apple.smb.server.plist"?
From the Internet:
1. Oplocks should be DISABLED on the server if there is any other file sharing protocol (AFP, etc.) other than SMB.
2. Offline Files will NOT work properly if Oplocks is disabled on the server side.
3. It was possible to config oplocks setting in smb.conf in Mac OS X versions prior to Lion but now there's no such config file.
My Question:
1. Does anyone else have similar problems?
2. Is it related to the Oppurtunistic Locking thing?
3. Is Oppurtunistic Locking enabled or disabled in Lion Server by default?
4. If it's related to Oplocks, how can I change the setting on the server?
5. I've noticed that the authentication from Windows PCs to the SMB share on the Lion Server is much slower then in SL. Could this somehow be related to my problem?
Thanks for your time! :-D

Any luck getting the info on SMBX parameters like OPLOCKS ? This is apparently causing an issue with Autodesk Revit. I am resorting to installing SMBUP.
There is an article that describes this method for altering the Lion smbd configuration parameters for honoring ACLs:
sudo defaults write /Library/Preferences/SystemConfiguration/com.apple.smb.server AclsEnabled -bool NO
from this article
http://support.apple.com/kb/TS4149
and this:
http://www.stanford.edu/group/macosxsig/blog/2011/08/enable-logging-with-107-smb x-w.html

IPod Sync Error after Upgrading to iTunes 10 and ios5

Some help please,
I've upgraded to iTunes 10 and installed ios5 on to my iPod Touch and I cant now sync as iTunes reports that the backup is corrupted or not compatable with the iPod
Thanks
Kris

Dear Mr. Sawyer,
To my surprise, the version is shown as 10.0.1.22. I will uninstall itunes and try loading the same again. After uninstalling do we need to delete any registry entries for Windows XP.
Thanks for your response and concern.
Regards
Amit Samel

A problem about iPhone 3GS after upgrading to iOS4

After upgrading to iOS4, when I switch on the 'Airoplane Mode' and record sound, I couldn't play back the material I had recorded. However, when my iPhone was in the version 3.1.X, materials recorded with 'Airplane Mode' on could be played back.

Made a new folder and that solved my problem

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

IPod in iPhone 3Gmusic doesn't work after upgrade to iOS4

My iPhone is very unstable after upgrade to iOS4 and one major failure is that iPod music doesn't work properly, some song (recently purchased from iTunes) cannot be played even if it is in the list. There are a lot of new space in memory after upgrade, seems songs are removed or compressed in some stupid way.
Spotify is also working like **** after upgrade to iOS4. Also big problems with the phone being slow and hanging in many different kind of modes.
From being a real iPhone fan, I am very disappointed. Maybe Apple think they are immortal now and think they can release any kind of crap and still keep their customers...

Try resetting the App Store and Clearing Cookies.
Reset Learned from Old Toad
App Store support. There is troubleshooting and a contact link.
Support
Time Machine
Inherit a Backup
Inherit a Backup (2)

Flash 9,0,124,0 security error after upgrade

I get the following error after upgrading my Flash Player
(after my system prompted me to install it while running the Flash
editor):
Internet Explorer has blocked this site from using an ActiveX
control in an unsafe manner.
I have uninstalled and reinstalled the player from the
browser, about 5 times now and it continues to be a problem for IE.
Works ok in Firefox if I manually download the FF installer. Is
there a standalone installer for Vista/IE7 or am I forced to use
the ActiveX installer which seems to have issues?

Fix: Removed both (!?more than one?!) versions of flash
player in my Programs and Features dialog, then ran
uninstall_flash_player.exe, reset IE7 to factory spec, then
reinstalled Flash from ActiveX. Seems to be working now.

TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
My iphoto was working with photostream and now it will not connect at all.
I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
help!

FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

Error after upgrade CRS 4.0.4SR1 to 4.0.5SR2

Hi,
I've got some errors after upgrading my CRS 4.0.4SR1 cluster to 4.0.5SR2.
First my publisher's status stay in "patch" status for near 2 days now. I'm not able to change anything in the configuration, i've got this message "Config Changes are not allowed during 'Patch' operation, which was started by '_ccbu_build' at 'Thu Apr 08 04:31:04 CEST 2010 '. Please try again after 'Patch' is complete."(ERREUR02.jpg). How can I change this status?
Then I've got errors in historical DB which is working but not on the publisher only on subscriber. How can I resynchronize this DB?
Thanks for your help.

Thanks Tammy for the reply
We already tried the suggested SAP Note couple of time without any luck.
Regards,
SJ

Error after upgrading from sap b1 pl 35 to pl 49

hello sap experts
iam getting the following error after upgrading from sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
"Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
regards
Jenny

Hello Jenny,
You may check by supreuser account first to see if you got the same error. If not, it probably just related to user authorization. If yes, it must be a bug.
Thanks,
Gordon

After upgrading to iOS4.1 there any green points problem at camera?

I was also had the green circle problem in take photo at the iphone4
If the ios4.0.2 after upgrading to ios4.1 , will not have this problem occur?
have anyone know that ?
thank you

No, the GM is not an unannounced public release. GMs are still beta and just for developers. All Gold Master means is the feature set is finalized but it can still have minor changes and bug fixes prior to release.
If it were an actual public release, you could get it from iTunes rather than torrent sites.

What can I do if I get an internal power error after upgrading to Windows 10?

QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
First, you'll need to quickly set the boot options to Safe Mode:
1. Hold the Windows key and press 'R' to open the run box.
2. Type MSCONFIG, then press ENTER.
3. Select the BOOT tab.
4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
5. Click Apply, then OK.
6. Click Restart. (If prompted, click Restart anyway.)
From Safe Mode disable the AMD Display Driver:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Disable, then click Yes to confirm.
7. Click Close.
8. Hold the Windows key and press the 'R' key to open the run box.
9. Type MSCONFIG, then press ENTER.
10. Select the BOOT tab.
11. Uncheck Safe boot.
12. Click Apply, then OK.
13. Click Restart. (If prompted, click Restart anyway.)
From Windows 10 started with the AMD Display Driver disabled:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Update Driver.
7. Click Search automatically for updated driver software.
8. An AMD driver should be found and installed.
The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.

I'm having the same problem. I got error message 21. I went to apple store. they are saying i have a hardware error. Really, my phone was working before the update. Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child.
Help please,
I will be glad to go back to the older software update

Imac error after upgrade to 10.8.4

I received an error after upgrade tp brand new imac. Error was upgrade was not installed. Upon reboot the version of SW in About thi Mac is 10.8.4. Bug?
iMac i7, 21.5" 16GB memory, fusion drive.
Thanks for input. I assume the upgrade took.

Verify Permissions gave me some errors, I deleted the repeats and the permissions fixed lines:
Repairing permissions for “Macintosh HD”
Warning: SUID file “System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig” has been modified and will not be repaired.
Warning: SUID file “usr/lib/sa/sadc” has been modified and will not be repaired.
Warning: SUID file “usr/bin/quota” has been modified and will not be repaired.
+++ (multiple repairs)
Permissions repair complete
I verfied the HD
Much text (removed)...
The volume Macintosh HD appears to be OK.
I also loaded the Apple downloads version of the upgarde and received the following (again):
The Installation failed
The insatllation encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Message was edited by: Steve51K

Konqueror error after upgrade

I upgraded my system today, and when I try to browse website with konqueror it gives me only this message back:
konqueror: ERROR: : couldn't create slave : Unable to create io-slave:
klauncher said: Error loading 'kio_http'.
Any suggestions?

Today I upgraded KDE to 3.5.3 but server wasn't completly sync, so there was no new openssl package. I had same problem as you, so I checked if kio_http.so file is in my system, and it was. Next thing I checked was ldd kio_http.so, and I noticed that libcrypto.so.0.9.8 was missing (this is a file from openssl package). I have manualy downloaded new openssl package, and after upgrading it, kio_http error was fixed.
So it should work in your system too. Maybe you should restart KDE or do "ldconfig /opt/kde/lib/kde3"

Syncing problem since upgrading to iOS4

I have a 3GS and I recently upgraded to iOS4. I sync my phone to two computers, one at home and one at work, to keep my calendars updated. Since installing iOS4, I've noticed that when I say "merge info" what happens is that the computer wins and erases any calendar events on the iPhone that are not on the computer. In other words, it is NOT merging the info. If I've synced to that same computer most recently then add an iPhone calendar event, that does sync to the computer next time I sync. The problem is only when I switch to the second computer and I have to manually click the calendar sync button.
Has anyone else had this problem? Is there a solution?
Thanks.

I also have this problem. It occurred on my iPod Touch only after I "upgraded" to iOS4, and it has always been the case with my new iPhone. Talking to the Genius Bar, they were surprised I was ever able to do this, and had no idea how to make it work, other than subscribing to MobileMe. But I've seen elsewhere in the forums that that might not even work.

Syncing Error after upgrading to iOS4

Similar Messages

Maybe you are looking for