Syncing files with Windows 7 after installing Lion

I keep my original files on my iMac desktop and sync with my Windows 7 laptop via home network. After installing Lion I have been unable to sync offline files. Was working fine with Leopard. When I run sync center from the laptop it gives me an error saying all the files are in use by another process. None of the files are open on the mac so not sure what is causing it. I have fiddled with permissions on the mac but doesn't seem to make any difference. Anybody got any ideas?

Though this is an old thread...
I have the exact same problem: Win7 64-bit, and even waited for the Lion Server 10.7.3 update hoping the problem would be fixed... but NO, the same problem is still there.
Symptom: client is a Win7 laptop, the server is Mac OS X 10.7.3 Lion Server with SMB and AFP shares. Win7 Offline Files stopped working after I upgraded Snow Leopard to Lion Server. It keep saying "The process cannot access the file because it is being used by another process". Some other WinXP clients are fine with the Offline Files though.
I Googled and studied online for several days now and it might be related to the "Oppurtunistic Locking", or "oplocks" for short, in the SMB protocol. Since Apple has re-written SMB, there's no "smb.conf" anymore to change oplocks setting. Does anyone know how to change the setting in "com.apple.smb.server.plist"?
From the Internet:
1. Oplocks should be DISABLED on the server if there is any other file sharing protocol (AFP) other than SMB.
2. Offline Files will NOT work if Oplocks is disabled on the server side.
3. It was possible to config oplocks setting in smb.conf before Lion but now there's no such file anymore.

Similar Messages

Problems with iWeb, after installing Lion

Hi,
Ever since I installed Lion, I have been having problems with iWeb. Any changes I make in iWeb, and then publish to my site, via mobileme, are not saved, and the site reverts to the orignial site, after closing the website, and iWeb also loses the cahnges. I am unable to sue the Publish Site button, and the option for Publish Site changes is not available.
I am using iLife 11.
These problems have only occurred since I installed Lion.
Any help greatly appreciated.
Nozza

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
For opening your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
You can download an already compiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Is anyone having issues with trackpad after install lion?

Since I have installed Lion(clean install from flashdrive) my track pad makes me "click" and hold to move windows around. I use to be able to just "tap" without fully compressing the trackpad. Is anyone else having this issue?
Thanks

I've noticed peculiarities with the trackpad on both Mac laptops as well as the Magic Trackpad on our home iMac since updating to Lion.
The biggest one is random right-click only where it seems the touchpad gets stuck in right-click mode. The only way to stop it is to "tap" rather than click and it seems to fix it. Otherwise, I've not had problems with dragging or anything.
What you may try is turning the option off/on again in Trackpad under System Preferences that is giving you problems. I had this problem on our home iMac with the Magic Trackpad with three-finger drag. Works fine now.

I am having problems with iChat after installing Lion, can anyone help?

I installed Lion this week after I installed everything seemed to be working great. However, if I open iChat and then log in and log out it will not let me log back into iChat

Try logging on to AIM on port 443 rather than port 5190.
Go to IChat in the menu bar > Preferences > Accounts.
Log out of AIM and then use the Server Settings tab
Set the port to 443(press return/enter(you might have to tick and untick SSL for 443 to stick)).
Log back in again.

Troubles with Windows after installing Acrobat X

I built a Windows 7 machine from scratch twice and ended up with the same issue. As soon as I install Adobe Acrobat X Standard, Windows Explorer freezes whenever I right-click on something in Windows Explorer (icon on desktop or inside folder). I disabled the Acrobat Shell Extension but still have other problems. I was unable to print anything to any of my printers. If I right-clicked on a printer, it would freeze up again. If I restarted the print spooler service, it resumed normal operation. The first time I upgraded to the latest update (10.1.13) and had the same problem. After the second reload, I left it at the default version 10.0.0. I have the same problem either way. I was able to remove all of the printers from Windows through registry and Windows System32 and recreated my printers. I also recreated the Adobe PDF printer per Adobe's instructions on their website. My initial tests proved successful. But when my user went to try it, the "Creating Adobe PDF" window came up and he got about 3 bars and it froze. I went in and tried printing some other PDFs, and it did create the files, but it would not let me delete the files. It indicated that Acrobat.exe still had the file locked. When I tried uninstalling Acrobat, it would stall part way through until I restarted the Print Spooler service. I have also tried disabling the AntiVirus (SEP).
I have spent way too many hours setting up this PC 3 different times and troubleshooting this. My gut says that there is a Windows update that may be interfering with this. But I don't know where to start. This worked fine on his previous machine (same version of all software.
I would appreciate any assistance. Surely someone else has run into this before. Thanks in advance.
Bill

Hi William ,
Please perform the following steps .
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check
Regards
Sukrit Dhingra

Sound Problems After Installing Lion

I see many are having issues with sound after installing Lion. I have sound and then will lose sound after closing and reopening. I have to restart to restore sound. This is getting old quick. Does anyone know a fix or if one is coming? Thanks!

Not sure how much it helps, but here is my experience:
I have found that after a while, midi-style sounds stop playing. Most obvious to me is the crinkle tune when throwing away trash, or the click when placing something into the trash. When these sounds stop playing, I can still set the volume (and the up/down volume sounds will play) but the midi tracks don't start playing.
A while back I was hunting for a solution to this problem and rebooted and messed around, etc, etc. One person suggested changing the midi format since they knew there was a bug in the midi playback in Lion (a beta comment I think). So I used the Audio MIDI Setup application to change the Built-In Output format to 2ch-32bit float. For a while the sounds were back.
Just now, I noticed that they had disappeared again, so I went back to Audio MIDI Setup and changed it back to 2ch-24bit Integer. All of a sudden, a stream of old sounds started playing - presumably everything that had not been correctly played for a while.
Not sure if it will work again, but next time the sound vanishes, I will try to change the format again and report back what happens. My guess is that just changing the format will cause the queue to reset and play any old sounds. Then the sounds will work for a while until the bug is triggered again. Perhaps the workaround for now is to just keep flipping the Ouput MIDI format?

Lion and snow leopard bootcamp, after installing lion snow leopard bootcamp with windows 7 does not boot

Just installed Lion OS on my 2nd mac (on the 1st without an issue) but as I had a partition with windows 7 (installed with Snow Leopard bootcamp).
It seems that Lion OS renamed the Bootcamp partition but I am not able to rename it through OS.
Is there a solution for this or do I need to re-install?
Many thanks for your help
Rui

Hi Jack.........ok ive managed to create a link to that video on how to install bootcamp.....this is the tutorial i used and i managed to gain 100% completion on bootcamp 1st time no messing......like i said in my previous reply did you save the windows support files from apple....(Critical).....ok no point in messing about i suggest you start again from scratch........these are the things i used and YOU will need to complete bootcamp
mem stick or cd-r / dvd-r......original copy disc of win 7 ...i never used an iso i used original disc....allow a minimum of 30gb of space for your win 7 partition.....if you want bootcamp so you can use big programs like windows based games i.e.....Crysis/Call of duty etc etc ..then you will need to consider that you will need to allow a bigger partition to allow your HD to store the files.....this is the reason i installed bootcamp and so i made my partition i have a 750GB HD so i made a partition of 300gb for windows 7 and left the other 450gb for Mac....so you need to partition enough for what you want bootcamp for remember once you get bootcamp working you will need to install ALL Important Windows updates Including Win 7 SP1......once everything is installed you will have bootcamp up and running lovely.....u can then boot up with either win7 or mac......click this link and watch carefully and do exactly as shown ok and you should be fine...if you have any probs contact me again ok.....let me know how you get on ok..:)...http://www.youtube.com/watch?feature=fvwp&v=QFIWtXTl4d0&NR=1

Mail doesn't sync properly with my university IMAP mail account after installing LION... help!

Mail doesn't sync properly with my university IMAP mail account after installing LION... worked great before with snow leopard.
when i try to configer the "incoming mail server" section, I fill everything out correctly and yet I get this message:
"can't verify the identity of imap.'myuniversityname'.ca"
there is some text explaining it after. If i press continue anyway, no new messages are transfered from my university server to mail on my mac.
I am running a 2010 13" macbookpro
thanks for any help!

Try one of these other free email clients:
http://email.about.com/od/macemailclients/tp/free.htm
You might put in a call to your university's tech support department. What you're experiencing is likely an issue they can help you with.

Using Windows 7 after installing Lion.

I have Windows 7 Ultimate using Bootcamp in my iMac. Will it be safe after installing Lion or will it get corrupted?

Will not be safe.
https://discussions.apple.com/thread/3199099?tstart=0
It may, but it could also present unable to boot back into Windows, it may change the partition number and require editinig BCD or just boot from Windows DVD and repair if possible and lucky.
I would install Lion to another drive, which is possible. It will need to erase the entire drive. Then clone the OS back if you want - or just run Lion off external and test it for a few days.
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Things that can be done now with Lion on your external that could not be done before
New Disk Utility features:
Manage all partitions with Disk Utility in OS X
Check partition table health in Lion's Disk Utility
Five quick Lion tips to make the transition easier

After Installing Lion how do i get the windows partition back?

The Windows Partition is not showing up after installing Lion.
I only get the option of booting Mac or Recovery
How do I get it back.

Hi!
I had the similar problem, where my windows option went missing after installing Lion. I gave up trying to resolve it and did a clean installation on windows again by re-configuring my Windows partition & install Windows 7 on it. It seems to work well for now...
Apple should have warned us that the Windows partition will be unreadable when u install Lion. Hence, allowing users to back their files up on Windows environment before installing Lion.
Thank god I did not have any important files save in Windows.

I just bought a 15" macbook pro, do the cds that come with the mac have the drivers i need to update windows after installing windows using boot camp?

I just bought a 15" macbook pro, do the cds that come with the mac have the drivers i need to update windows after installing windows using boot camp?

What DVDs are this ?
If it is OSX Snow Leopard Installation DVD then yes this disc contains the BootCamp Drivers version 3.x and is needed after the installation of Windows to install the BootCamp Drivers.
With OSX Lion BootCamp is at version 4.x and the BootCamp Drivers have to be downloaded during use of the BootCamp Assistant in OSX.
Boot Camp 3.0, Mac OS X 10.6 FAQ
Frequently asked questions about Lion and Boot Camp 4.0
Stefan

Having many problem with wifi....after installing lion......

Having many problem with wifi....after installing lion......it connect with wifi but not with Internet and at the same time iPad 2, iPhone 4 works smooth......help......I have MacBook air without thunderbolt and mac mini

I had the same problem last night. Boot into OSX and reboot the router - fine. Boot into Windows and wrong. Here were my fixes:
Firstly, I kept all the settings on my router solid. Just leave them as they are. Boot into OSX and check the Network settings and make a note of your IP address and the router's IP address.
Second, boot into Windows, then open up your wireless connection settings and navigate through to the properties where you can set the IP address.
Third: Set the IP address to your routers IP address changing the last set of digits to a value between 5 and 255 (I have 8 devices so I set the last two digits to 10.) This will keep the IP static.
Tab through the Mask settings to default those.
Then set the default gateway to your router's IP address.
Check that the Network Adapter's setting has IPv6 disabled (uncheck the box)
Finally: Set the primary DNS server to 8.8.8.8 then the secondary to 8.8.4.4 and then reboot the router.
That's what got my connection running.

Why can´t i connect to Windows servers after installing Lion?

Why can´t i connect to Windows servers after installing Lion?

Me too!
MacBook Pro 15" 2011, OS X Lion 10.7

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?

First sentence in OPs question:
I use a two button mouse with my Mac Book Pro
I guess the track pad settings would look similar to my screen shot?
Regards,
Colin R.

Cannot open iTunes after installing Lion.Says it is trying to restore windows and quit unexpectedly

Cannot open itunes after installing Lion. Says trying to restore windows and then quits

same
Message was edited by: Ben123212321

Syncing files with Windows 7 after installing Lion

Similar Messages

Maybe you are looking for