Syncing iPhone with selected groups: selection not possible

I'm trying to sync only a part of my address book to my iPhone 4, but iTunes did not sync the group named iPhone (the group was created in the iPhone, but was empty). Then I've created a new group called "Mobil" in the address book with 300 or so contacts. But now iTunes is not able to see this group (as shown in the screen shot below).
Any hints from an experienced sync expert? Should I look for some third party apps to sync properly?

Mac OS X 10.6.7
Contact application is Apples Address Book 5.0.3
Here's the screenshot (didn't upload the first time)

Similar Messages

Syncing iPhone with one Mac but not another

I have a home Mac and a work Mac.
I want the iPhone 3GS to sync with my home Mac, and it does so perfectly.
Sometimes I'm at work and I need to charge the phone, so I plug it into the work Mac, and it launches iTunes and attempts to sync with it (which, if I let it continue, would erase all my loaded stuff). I always stop it manually.
I see the option in iTunes checked for "Always sync the iPhone to this Mac" (or something like that). If I uncheck it, it fixes this, but next time I go home, the iPhone doesn't sync with the home phone because this option unchecks itself at home too!
So how do I make sure it syncs to the home Mac, but does not erase itself when plugged into the work Mac?

From the user guide, page 16, http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
You may want to prevent iPhone from syncing automatically when you connect iPhone to a computer other than the one you usually sync with.
1. Turn off automatic syncing for iPhone: Connect iPhone to your computer. In iTunes, select iPhone in the sidebar, then click the Summary tab. Deselect “Automatically sync when this iPhone is connected.” You can always sync by clicking the Sync button.
2. Prevent automatic syncing for all iPhones and iPods: In iTunes choose iTunes > Preferences (on a Mac) or Edit > Preferences (on a PC), click Devices, and select “Disable automatic syncing for all iPhones and iPods. If this checkbox is selected, iPhone won’t sync automatically, even if “Automatically sync when this iPhone is connected” is selected in the Summary pane.
3. Prevent automatic syncing one time, without changing settings: Open iTunes. Then, as you connect iPhone to your computer, press and hold Command-Option (on a Mac) or Shift-Control (on a PC) until you see iPhone appear in the sidebar."
I use option 3 without any problems.

Recently downloaded latest version of iTunes software, afterwards, while trying to sync iphone with PC received this error message: Unable to Load Resource not found; SyncUICoreLocalized.dll; please advise, thank you

Recently upgraded PC with latest edition of iTunes (1/30/2014), afterwards, received this error message while attempting to sync iphone with PC: Unable to load, resource not found, SyncUICoreLocalized.dll

THIS HAS EVERY APPEARANCE OF A SOFTWARE GLITCH BY APPLE ... So first suggestion is NOT to begin reinstalling various software but to await some answer & fix from Apple. Too many have same problem on various systems, in my view (I am not an Apple rep but have certainly faced many glitches over the years).
PS - LOTS of Apple software problems these days, including many people having their Contacts shredded. What's going on with Apple?

The old computer is broken so I bought a new one. I have downloaded itunes but will not sync iphone with the new itunes. What should I do to get all the apps, songs and photos on itunes?

The old computer is broken so I bought a new one. I have downloaded itunes but will not sync iphone with the new itunes. What should I do to get all the apps, songs and photos on itunes?

See Recover your iTunes library from your iPod or iOS device.
tt2

I have an iphone 4S with broken wifi (!) and I need to sync my contacts before I set up my new iphone 6. I thought contacts synced automatically with itunes but seems not. I've found my Apple address book but contacts are outdated. What to do? Help!

I have an iphone 4S with broken wif i :-( and I need to sync my contacts before I set up my new iphone 6. I thought contacts synced automatically with itunes but seems not. I've found my Apple address book but contacts are outdated. What to do? Help!

If your Bluetooth is working, you may be able to tether your phone to another device, and backup that way. Either via iCloud or one of many Apps that send yourself a VCF file containing your contacts.
You may have to update to a later IOS via USB and iTunes, not sure if IOS 6 has Bluetooth Tethering.
I would have thought you could also switch off cloud sync'ing for your contacts, this should ask a question if you want to keep the contacts on your phone. An iTunes Backup and then Restore to your new iPhone should restore the local contacts. Then sync these back to the iCloud.
Hope this helps.

I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. Please help

I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. There's only a few things that could be my passcode, but because it disables for an hour, it is time consuming trying to figure it out. What do I do? I do not care about having to erase everything since it's new and there's nothing on it, but it was never synced with iTunes.

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

While F-92 posting with T type 210 not possible (No acquisition posted)

Hi
Asset Retirement Not Possible
We have uploded legacy data in our Production server on 01.04.2010.. after that we have to sale one of them asset .
I am using T.code :- F-92 .. but i couldn't sale that and system gives me error
Posting with trans.type 210 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
Ajay
yes we are using Group Assets for income tax depreciation
when checked at AS83 no values found under taken over value for the group asset
***. aquistion val - 0
and all other values are zero
Edited by: johnrambo on Oct 4, 2010 12:09 PM
Moderator: Don't repost threads which were locked by moderator

Hi
As I said, go to AS82 and upload the Income tax values for this group asset....
Unless you do that, system wont allow you to proceed.. May be you can enter a nominal value if it is important to sell the asset now and later on correct it
Regards
Ajay M

FI _AA errr Posting with trans.type 210 not possible (No acquisition posted

Asset Retirement Not Possible
Dear,
We have uploded legacy data in our Production server on 01.04.2010.. after that we have to sale one of them asset .
I am using T.code :- F-92 .. but i couldn't sale that and system gives me error
Posting with trans.type 210 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
Can anyone Help on this topic
Regards,
rambo
deleted
Moderator: Please, search SDN*

Hi Rambo
I think you are using Group Assets for income tax depreciation
If yes, have you uploaded values into Group assets from AS82? Can you please check this and revert
Regards
Ajay M

MIRO error Posting with trans.type 159 not possible (No acquisition posted)

Hi,
I have the following probem while doing MIRO. Would appreciate if someone could help.
Error in Purchase invoice posting MIRO :-
The user has created a PO for asset in FY2010 and has performed a MIGO in FY2010.
Now in FY2011 the user tries to invoice against the above asset and wants to post it thru Trans MIRO.
System gives an error during MIRO "Posting with trans.type 159 not possible (No acquisition posted)" Message no AA 324
Trans type 159 has trans type group 12 attached to it.
MIGO can not be reversed because it belongs to the closed FY.
Please help

Hi
refer notes 1526247 and 1507808... Though it relates to Japan, but the issue is same
Br, Ajay M

ABUMN: Posting with trans.type 300 not possible (No acquisition posted)

Hello everyone,
I have seen a few threads on this topic, however I am still not finding a resolution to my issue. I am very new to the FICO configuration scene and probably need a little more hand holding than the others who have asked this question.
I am having and issue using ABUMN while transfering a Capital Investment Project (CIP Asset) under a asset class of AUC, to a standard fixed asset. The CIP has been capitalized. However, when I try to perform the transfer I am receiving the following error:
Posting with trans.type 300 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 300 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
I have read through SAP NOTE 327088 (for retirements transfer variant 4) and it just doesn't help me with the issue. I know it probably should, but I do not know enough about this process in order for it to make a whole lot of sense.
If anyone can help me with this, it would be greatly appreciated. Again, I am very new, so I will probably have several follow-up questions as well.
Thanks in advance for the help!
Rhonda

Okay...
I have finally figured this out on my own.
When trying to transfer a capital investment project asset with an AuC class (asset under construction), ABUMN is not to be used.
1st. The internal order needs to be fully settled (KO02). Create a settlement rule "FUL" for the designated fixed asset.
2nd. Run "Actual Settlement" run via KO88.
This should transfer everything from the CIP asset to the fixed asset. You can double check this via the S_ALR_87011967 - ... by Plant report. Run this report prior to performing the steps above and the money will show in the CIP asset account, run it again after the above steps. The CIP should be zeroed out and the fixed asset should now carry the amount.

Posting with trans.type 200 not possible

Dear Gurus,
when I try to scrap the asset, I am getting an error as below
Posting with trans.type 200 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 200 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
Thanks in advance and Regards

Tried all Transaction types.
Sometimes I get this error
Retirement of old assets data not possible (No existing old assets data)
Message no. AA416
Diagnosis
You have tried to post an retirement based on amount, using a transaction type which refers to old assets data (acquisitions from previous years).
However, the sum of the APC at the start of the fiscal year and the transactions, related to the past, equals 0.
Procedure
Check the transaction type entered and the asset.
When I tried for other company code it is working
Compared the configurations of both the company codes. Everything is same.
We are using Group Assets. Group Asset is a required field in Tax Depreciation Area. I am giving that.
Is there anything else I need to check?
Please help.
Regards

Posting with trans.type 300 not possible (No acquisition posted)

Dear Gurus,
When I execute the T-code ABUMN, i've got the following message:
Posting with trans.type 300 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 300 belongs to a transaction type group, which can only
be used to post to assets to which posting has already been performed.
However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used
for the first acquisition to an asset.
Regards

Hi sapraj ,
Transaction type 300 is "transfer of retire. old assets data from cap. asset" ,which means before you transfer this asset, it has to be first capitalized , for asset capitalization, you may use transaction type 100
Mu

Posting with trans.type 210 not possible (No acquisition posted)

Hi,
While doing asset retirment through f-02 we are facing this error
Posting with trans.type 210 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
Please provide solution.
Regards
Kuldeep singh

Hi
Values are there in the asset .
capitalisation date is 21.05.2008. and the value in transaction tab is 149,715.00 Rs. Is there other way to retire the current year assets.
regards
Kuldeep singh

Posting with trans.type 300 not possible (No acquisition posted)   Message

Dear Gurus,
When I execute the T-code ABUMN, i've got the following message:
Posting with trans.type 300 not possible (No acquisition posted)
     Message no. AA324
Diagnosis
     Transaction type 300 belongs to a transaction type group, which can only
     be used to post to assets to which posting has already been performed.
     However, no postings have been made to this asset.
Procedure
     Use a transaction type from a transaction type group, which can be used
     for the first acquisition to an asset.
I don't know why I've got this problem. I did those tries:
Asset Accounting => transaction => inter-company asset transfers => define transfer variants => define transfer variant:
I don't know which transaction type to use? (Of course, if the problem can be solve here, i juste suppose it ).
And I tried also to use an other asset (they said that there isn't any acquisition in this asset so I tried with others, that has got acquisitions).
Thanks for replying,
With regards,
Gül'

Thanks for helping,
But the problem occures again...
After transfert variant, I choose the variant 4 'transfert within a company code", then I enter 100 like you said it to me in the 2 cases:
- Transaction type in selling company code
- Transaction type for receiving company code
but i've got a new message:
Transfer variant 4 02 *: Method 1 retmt TTY not allowed
     Message no. AC636
Diagnosis
     Transfer method 1 is specified for depreciation area *. A retirement
     transaction type must therefore be assigned.
Procedure
     Assign a retirement transaction type.
Then I tried others tranfers methods but it doesn't work! And I tried others transaction type too (always the same error message)

I cant access control on syncing iphone with mac air to get contact via outlook to change on phone

I cant access control on syncing iphone with mac air to get contacts via outlook to change on phone. Worked fine on old itunes.

Hi Steve, Thanks for that. When I conect the phone it comes up with iphoto and starts to sync and then when that is finnished the itunes window shows my phone syncing at the top of the screen. The only button that says iphone which is on top right only asks if I want to eject and then disapears when sync finnishes. I can not see any other way of showing a side bar view and i can not access any way of controling the sycn service. It seems to be syncing calander but not my contacts. Have I missed something?

Adobe Acrobat XI pro version, Windows 7, running on iMac parallels, converting pdf to a pdf with reduced size is not possible, error: error in converting the file! What to do? Its a bit annoying not to be able to store pdf files in reduced size, any idea?

Adobe Acrobat XI pro version, Windows 7, running on iMac parallels, converting pdf to a pdf with reduced size is not possible, error: error in converting the file! What to do? Its a bit annoying not to be able to store pdf files in reduced size, any idea?? Thanks, Jörg

Hi Jorg ,
Are you trying to reduce the file size with the "Reduced size PDF" in the save as other option.
Give it a try if you haven't done it prior.
Open that PDF>File>Save as Other>Reduced size PDF.
If possible ,please share the snapshot of the error message with us so that we can have a look in order to assist you further.
Regards
Sukrit Dhingra

Syncing iPhone with selected groups: selection not possible

Similar Messages

Maybe you are looking for