Syncing issues post laptop restore. Need some help with getting media back off phone and into itunes again

I recently had to restore my HP laptop. After the restore, i re-installed itunes and can now not get all media on my iphone to re-sync back into itues.. any tips? I have all files backed up from laptop pre-restore, yet cant get this to work. any tips?

If any of your devices are running iOS7 then you need to use iTunes 11.1.1.
Using system restore can confuse the process of adding or removing software. Always use the supplied installer/removal process if possible.
Sometimes it may be necessary to reboot after adding or removing one component before the next can be added or removed.
Manually deleting files or registry entries is likely to make the problem more complicated, not less so, particularly if Windows still things the software is installed.
If an installer still won't complete try starting Windows in safe mode.
tt2

Similar Messages

Need some help with getting mail folders into Maverick please???

I have finally gotten my old Snow Leopard files transferred to Maverick partition on my hard drive but my mail did not pull over the old saved mailboxes with saved emails. How can I get those old saved emails into Mavericks so I can quit using Snow Leopard all together? The top picture below are my mailboxes you can see in Snow Leopard on the left of the screen (seems to have copied over the mail in my in-box but not my saved mailboxes. the second picture is what shows in Maverick. Can someone direct me on how to get my saved emails to Maverick please? All help is greatly appreciated and make the instructions simple, not real tech savy so need exact instructions. Thanks so much for any and all help:
Also, is there any way to not group mail from the same person/company in a folder? Can't seem to find in preferences where you can get each email on a separate line. For instance if I get several emails from Apple Support it groups them into one folder and I would just as soon have them all listed separately in mail. Thanks again, Gary

I couldn't have done any of this without the excelletn support from you Andy. You were patient with me and your assistance will never be forgotten. Thank you is not enough. I was so confused and now more aware of what is going on. I wasn't familiar with users vs. partitions I guess and was swiveling and seeing different things than when restarting and couldn't figure out what was going on. Again, thank you for your patience, and excellent skills to get me on the road to using Maverick. THANK YOU!!!

My adobe audition app I have payed disappeared so I had t uinstall the program and need to help to get it back: have tried to download it again but it dont work! This has happend twice now.

Hallo! I ned help to get my adobe audition app as I have payed for back to my computer. I had to uinstall the program also creative cloud since I didnt have the audition app any longer? This has happend before and I like have my money back as I have payed for it or help from tthe adobe team to install it again with the app.
Thank you for help
Lise Tollefsen Slembe

Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

My iPad has been stolen, I need some help with the Find my iPhone app and iCloud please

Hello people. I have (had) an iPad 1 (wifi only) - which was stolen two days ago. It's locked with a passcode but I am worried that someone will be able to get into it. I've got the Find app installed on my iPhone 4S and it shows that both my iPad and stolen iPod are offline.
Q - if either the iPad or the iPod goes into an unlocked wifi area, will I be notified on my phone?
Q - can anyone actually break into my iPad as it is locked?
Q - how does iCloud work in terms of the info that's on my iPad - photos etc that I don't want to lose?
Q - I've reported this to the police - does Apple need to know?
I'd be very grateful for any advice, many thanks in advance

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5

I need some help with getting qualified

Hi im looking to get qualified as a ACA (Adobe Certified Associate), but i would like to study for it by myself. Can anyone suggest the name of a compny or test centre where i don't have to do their training and can just phone up and book an exam?

Hi Natasha,
did you have a look here http://www.adobe.com/training/ or some more of these "Learning Links" like
http://www.adobe.com/communities/ and http://www.adobe.com/support/certification/.
Hans-Günter

I need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a hard drive.

i need some help. im getting error -69 when trying to sync my ipod. i dont kno what to do. ive tried googling as much info as i can on this subject but i cant seem to find a answer to get me off to a good starting point. i back all my music up on a external hard drive.

If the file was not originally from iTunes, you'll need to redownload it from it's original source or rerip it from the CD. Files can sometimes go bad and become corrupted. As to how or why that happens, there are a number of ways.
What format are the problematic tracks in? Have you tried converting them to another format in iTunes?
iTunes: How to convert a song to a different file format
B-rock

Need some help with downloading PDF's from the net.

need some help with downloading PDF's from the net. Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen? any suggestions?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Need some help with a Macally enclosure and a spare internal drive

Need some help with a Macally enclousure
Posted: Oct 1, 2010 10:55 AM
Reply Email
Aloha:
I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
Any suggestions?
Dan Page

Hi-
Drivers aren't typically needed for external enclosures.
Macally has none listed for that enclosure.
The same is true for the WD drive, internal or external; no drivers.
With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
How is the external connected?
Have you tried different cables, different ports?
Bad/damaged cables are fairly common.
Have you verified connections inside of the enclosure?

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Need some help with guitar setup...

jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
digitech gnx-3
alesis sr-16
sure mic's
yamaha e203 keyboard
here's the setup:
yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
here's the problem:
everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
any help would be greatly appreciated!

anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties

Need some help with region position

Hi,
I need som help with regions position....
Background:
I have 2 regions, I will call them reg1, reg2 and reg3.
reg1 = Page Template Body (2. items below region content), column 1, search region.
reg2 = Page Template Body (2. items below region content), column 2, import file region.
reg3 = Page Template Body (3. items above region content), column 1, search result, grid region, very wide.
Issue with the position, the setup explained makes my layout like this
reg1--------------------------------reg2
------------------reg3--------------------
What I want:
reg1-reg2
------------------reg3--------------------
What am I doing wrong?
Regards Daniel

Daniel,
this will also work:
Region1 HTML table cell attributes
width="10%"
Region2 HTML table cell attributes
align="left"
without touching the page template.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

I NEED SOME HELP WITH UPDATING MY IPOD TOUCH PLEASE

i need some help with my ipod the version is 3.1.3 and every time I'm trying to update it says it can not be restored then it says unknown error so i need some help updating my ipod to version 4.2

If you mean you're trying to update your ios go to settings/general/software update. then you should see the latest ios just tap it and it will automatically update your ipod. If you're trying to restore your ipod (as it's not quite clear in your query) try doing it through itunes instead of on the device itself

Please I need some help with a table

Hi All
I need some help with a table.
My table needs to hold prices that the user can update.
Also has a total of the column.
my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
I have tried using but as I need to set the toal with something like total
    totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
Can any one please advise on some way I can get this to work ?
Thanks for reading
Craig

Hi there camickr
thanks for the help the other day
this is my full code....
package printing;
import java.awt.*;
import java.awt.event.*;
import java.awt.print.*;
import javax.swing.*;
import javax.swing.table.*;
import java.text.DecimalFormat;
public class tablePanel
    extends JDialog implements Printable {
BorderLayout borderLayout1 = new BorderLayout();
private boolean printing = false;
private Dialog1 dialog;
JPanel jPanel = new JPanel();
JTable table;
JScrollPane scrollPane1 = new JScrollPane();
DefaultTableModel model;
private String[] columnNames = {
private Object[][] data;
private String selectTotal;
private double total;
public tablePanel(Dialog1 dp) {
    dp = dialog;
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
public tablePanel() {
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
private void jbInit() throws Exception {
    jPanel.setLayout(borderLayout1);
    scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
    this.add(jPanel);
    jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
    scrollPane1.getViewport().add(table);
    jPanel.setOpaque(true);
    newTable();
    addToModel();
    addRows();
    setTotal();
public static void main(String[] args) {
tablePanel tablePanel = new tablePanel();
tablePanel.pack();
tablePanel.setVisible(true);
public void setTotal() {
total = 0;
int i = table.getRowCount();
for (i = 0; i < table.getRowCount(); i++) {
    String name = (String) table.getValueAt(i, 1);
    if (!"".equals(name)) {
      if (i != table.getRowCount() - 1) {
        double dt = Double.parseDouble(name);
        total = total + dt;
String str = Double.toString(total);
table.setValueAt(str, table.getRowCount() - 1, 1);
super.repaint();
public void newTable() {
    model = new DefaultTableModel(data, columnNames) {
    table = new JTable() {
      public Component prepareRenderer(TableCellRenderer renderer,
                                       int row, int col) {
        Component c = super.prepareRenderer(renderer, row, col);
        if (printing) {
          c.setBackground(getBackground());
        else {
          if (row % 2 == 1 && !isCellSelected(row, col)) {
            c.setBackground(getBackground());
          else {
            c.setBackground(new Color(227, 239, 250));
          if (isCellSelected(row, col)) {
            c.setBackground(new Color(190, 220, 250));
        return c;
    table.addMouseListener(new MouseAdapter() {
      public void mouseClicked(MouseEvent e) {
        if (e.getClickCount() == 2) {
        if (e.getClickCount() == 1) {
          if (table.getSelectedColumn() == 1) {
   table.setTableHeader(null);
    table.setModel(model);
    scrollPane1.getViewport().add(table);
    table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
public void addToModel() {
    Object[] data = {
        "Price", "5800"};
    model.addRow(data);
public void addRows() {
    int rows = 20;
    for (int i = 0; i < rows; i++) {
      Object[] data = {
      model.addRow(data);
public void printOut() {
    PrinterJob pj = PrinterJob.getPrinterJob();
    pj.setPrintable(tablePanel.this);
    pj.printDialog();
    try {
      pj.print();
    catch (Exception PrintException) {}
public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
    Graphics2D g2 = (Graphics2D) g;
    g2.setColor(Color.black);
    int fontHeight = g2.getFontMetrics().getHeight();
    int fontDesent = g2.getFontMetrics().getDescent();
    //leave room for page number
    double pageHeight = pageFormat.getImageableHeight() - fontHeight;
    double pageWidth = pageFormat.getImageableWidth();
    double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
    double scale = 1;
    if (tableWidth >= pageWidth) {
      scale = pageWidth / tableWidth;
    double headerHeightOnPage = 16.0;
    //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
    //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
    double tableWidthOnPage = tableWidth * scale;
    double oneRowHeight = (table.getRowHeight() + table.getRowMargin()) * scale;
    int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
    double pageHeightForTable = oneRowHeight *numRowsOnAPage;
    int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
    if (pageIndex >= totalNumPages) {
      return NO_SUCH_PAGE;
    g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
//bottom center
    g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages), (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
    g2.translate(0f, headerHeightOnPage);
    g2.translate(0f, -pageIndex * pageHeightForTable);
    //If this piece of the table is smaller
    //than the size available,
    //clip to the appropriate bounds.
    if (pageIndex + 1 == totalNumPages) {
      int lastRowPrinted =
          numRowsOnAPage * pageIndex;
      int numRowsLeft =
          table.getRowCount()
          - lastRowPrinted;
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(oneRowHeight *
                                 numRowsLeft));
    //else clip to the entire area available.
    else {
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(pageHeightForTable));
    g2.scale(scale, scale);
    printing = true;
    try {
    table.paint(g2);
    finally {
      printing = false;
    //tableView.paint(g2);
    g2.scale(1 / scale, 1 / scale);
    g2.translate(0f, pageIndex * pageHeightForTable);
    g2.translate(0f, -headerHeightOnPage);
    g2.setClip(0, 0,
               (int) Math.ceil(tableWidthOnPage),
               (int) Math.ceil(headerHeightOnPage));
    g2.scale(scale, scale);
    //table.getTableHeader().paint(g2);
    //paint header at top
    return Printable.PAGE_EXISTS;
class TableRenderDollar extends DefaultTableCellRenderer{
    public Component getTableCellRendererComponent(
      JTable table,
      Object value,
      boolean isSelected,
      boolean isFocused,
      int row, int column) {
        setHorizontalAlignment(SwingConstants.RIGHT);
      Component component = super.getTableCellRendererComponent(
        table,
        value,
        isSelected,
        isFocused,
        row,
        column);
        if( value == null || value .equals("")){
          ( (JLabel) component).setText("");
        }else{
          double number = 0.0;
          number = new Double(value.toString()).doubleValue();
          DecimalFormat df = new DecimalFormat(",##0.00");
          ( (JLabel) component).setText(df.format(number));
      return component;
}

Need some help with putting a folder in users directory

I'm not sure how to do this, but what I want to do is put this file in C:/My Documents, but I need to be able to verify that C://My Documents exists, if not put it in C:/Program Files.
Can any one help me out?
try {
                    String[] contactArray = parseDatFile(fc.getSelectedFile());
                    Document document = createXMLDocument(contactArray);
                    saveToXMLFile(
                    document,
                    new File(
                    "C:/Program Files/xxx/",// looks for directory for list
                    "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"));
                } catch (Exception exc) {
                    File f = new File("C:/Program Files/xxx/");// setting directory for list if not there
                    boolean yes = true;
                    yes = f.mkdir();// creating directory
                    try {
                        String[] contactArray = parseDatFile(fc.getSelectedFile());
                        Document document = createXMLDocument(contactArray);
                        saveToXMLFile(
                        document,
                        new File(
                        "C:/Program Files/xxx/",// used only if the directory didn't exist
                        "xxxxxxxxxxxxxxxxxxxxxxx"));

Need some help with putting a folder in users directoryI recomend using System.getProperty( "user.home" ) not a hard-coded value.
This will use the users home folder ( C:\My Documents ) on Win9X (I guess), C:\Documents and Settings\<current user> on Win2K +, and ~ on Unix-a-likes.

Need some help with threads...

Hello all,
I am working on a project at work, and I am not the best programmer in the world. I have been trying to get my head around this for a couple of days and just cannot get it to work.
I am writing an instrumentation control program that will have three threads. One is the GUI, one will receive control information and set up the hardware, and one will check the hardware status and report it to the GUI periodically. I plan on using the invokeLater() method to communicate the status to the GUI and change the status display in the GUI. Communication from the GUI to the controller thread and from the status thread to the controller thread I had planned on being piped input/output stream as appropriate. I have a control class and a status class that need to be communicated over these piped streams. In some trial code I have been unable to wrap the piped input/output streams with object input/output streams. I really need some help with this. Here is the main thread code:
package playingwiththreads1;
import java.io.*;*
*public class PlayingWithThreads1 {*
public static void main(String[] args) {*
* PipedOutputStream outputPipe = new PipedOutputStream();*
* ObjectOutputStream oos = null;*
* ReceiverThread rt = new ReceiverThread(outputPipe);*
// Start the thread -- First try*
* Thread t = new Thread(rt);*
t.start();*
// Wrap the output pipe with an ObjectOutputStream*
try*
oos = new ObjectOutputStream(outputPipe);*
catch (IOException e)*
System.out.println(e);*
// Start the thread -- Second try*
//Thread t = new Thread(rt);*
//t.start();*
/** Send an object over the pipe. In reality this object will be a
class that contains control or status information */
try
if (!oos.equals(null))
oos.writeObject(new String ("Test"));
catch (IOException e)
try
Thread.sleep(5000);
catch (InterruptedException e)
I read somewhere that it matters where you start the thread relative to where you wrap piped streams with the object streams. So, I tried the two places I felt were obvious to start the thread. These are noted in the comments. Here is the code for the thread.
package playingwiththreads1;
import java.io.*;
public class ReceiverThread implements Runnable {
private PipedInputStream inputPipe = new PipedInputStream();
private ObjectInputStream inputObject;
ReceiverThread (PipedOutputStream outputPipe)
System.out.println("Thread initialization - start");
try
inputPipe.connect(outputPipe);
inputObject = new ObjectInputStream(inputPipe);
catch (IOException e)
System.out.println(e);
System.out.println("Thread initialization - complete");
public void run()
System.out.println("Thread started");
try
if (inputObject.available() > 0)
System.out.println(inputObject.read());
catch (IOException e)
System.out.println(e);
Through testing I have determined that no matter where I start the thread, the thread never gets past the "inputObject = new ObjectInputStream(inputPipe);" assignment.
Could someone please help me with this? There are other ways for me to write this program, but this is the one that I would like to make work.
Many thanks in advance,
Rob Hix
Edited by: RobertHix on Oct 6, 2009 3:54 AM

Thanks for the help, but that did not work. I tried flushing the ObjectOutputStream and it is still hanging when initializing the thread.
Here is a better look at the code since I was helped to figure out how to insert it:
The main method:
package playingwiththreads1;
import java.io.*;
public class PlayingWithThreads1 {
    public static void main(String[] args) {
        PipedOutputStream outputPipe = new PipedOutputStream();
        ObjectOutputStream oos = null;
        ReceiverThread rt = new ReceiverThread(outputPipe);
        // Start the thread -- First try
        //Thread t = new Thread(rt);
        //t.start();
        // Wrap the output pipe with an ObjectOutputStream
        try
            oos = new ObjectOutputStream(outputPipe);
            oos.flush();
        catch (IOException e)
            System.out.println(e);
        // Start the thread -- Second try
        Thread t = new Thread(rt);
        t.start();
        /* Send an object over the pipe. In reality this object will be a
         * class that contains control or status information */
        try
            if (!oos.equals(null))
                oos.writeObject(new String ("Test"));
                oos.flush();
        catch (IOException e)
            System.out.pringln(e);
        try
            Thread.sleep(5000);
        catch (InterruptedException e)
}The thread code:
package playingwiththreads1;
import java.io.*;
public class ReceiverThread implements Runnable {
    private PipedInputStream inputPipe = new PipedInputStream();
    private ObjectInputStream inputObject;
    ReceiverThread (PipedOutputStream outputPipe)
        System.out.println("Thread initialization - start");
        try
            inputPipe.connect(outputPipe);
            inputObject = new ObjectInputStream(inputPipe);
        catch (IOException e)
            System.out.println(e);
        System.out.println("Thread initialization - complete");
    public void run()
        System.out.println("Thread started");
        try
            if (inputObject.available() > 0)
                System.out.println(inputObject.read());
        catch (IOException e)
            System.out.println(e);
}Does anyone else have and ideas?

Syncing issues post laptop restore. Need some help with getting media back off phone and into itunes again

Similar Messages

Maybe you are looking for