Syncing issues while connected to itunes

Hello People?
My iPhone is connected to my iTunes, via my iMac. It goes through the normal 5 steps for syncing, but then says finishing syncing, but never finishes!!! WHY IS THIS HAPPENING? AAAAAAAARRRRRGGGGHHHH!!!!
Your advice people will be gratefully appreciated!

I was able to do a total reset to factory settings which fixed everything.Not sure what caused the first problem.

Similar Messages

Syncing app while connected to itunes

My touch will not allow me to sync my apps nor will it let me check the box to sync my apps when connected to itunes. The screen is faded and will not let me choose anything! Please help!

iTunes was restricted so I had to go and make it unrestricted. That still didn't work until I logged into iTunes through the touch which required me to enter the security code on my credit card. I powered down and back up then connected to iTunes. This worked!
Your help was much appreciated!
Thanks!

TS4431 Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

Resolve iOS update and restore errors

My mini ipad is blocking while connecting with itunes. I do?

my mini ipad is blocking while connecting with itunes.
I do?

Hello Gamerpapanatas,
Based on the information you have provided, it sounds like your iPad mini is not connecting to iTunes. The following article may help to resolve your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Ipod classic 160GB very slow sync and cannot connect to itunes store windows 7 ansd itunes 10.6.0.40. I have now been trying for 3 weeks to restore my iPod. Really frustrated, any ideas would be welcome.

Ipod classic 160GB very slow sync and cannot connect to itunes store windows 7 ansd itunes 10.6.0.40. I have now been trying for 3 weeks to restore my iPod. Really frustrated, any ideas would be welcome.

Cured the problem! Reinstalled an earlier version of itunes from oldapps.com (version 10) now everything works as it should. I would suggest that if you are experiencing these problems that you do the same. I must say that it is a brave business decision on behalf of apple to effectively lock out all windows 7 users from their products and sales channels and I can only wish them luck in this very shortsighted policy.

Ipod Worked by voice control in my Ford Sync, then I connected to Itunes to update and voice control no longer works!

My Ipod worked by voice control when it was connected to my Ford Sync. I connected to Itunes to update and transfer music and voice control no longer works. Help?

Its is a 5th Generation Ipod Classic with video NOT a NANO!

10.9.2 Update Issue (VPN) - Eclipse Perl debugger issues while connected to VPN

This post was initially added to this discussion: 10.9.2 Mavericks update issues
I have yet another issue related to 10.9.2 update - Eclipse Perl debugger issues while connected to VPN...
One of the big changes introduced by 10.9.2 update - are VPN changes (security fixes). Unfortunately, whatever these changes are - they "broke" Eclipse (OpenSource IDE) debugger. I am not sure if *all* programming languages (Eclipse plugins) are affected by this, but I know for sure that 'Epic' (Perl plugin) debugger *stopped working* while system is connected through VPN.
Here is the error that gets “popped-up” in the Eclipse:
Timed out while waiting for Perl debugger connection
… and here is exact exception stack that gets printed:
Unable to connect to remote host: 130.10.210.74:5000
Compilation failed in require.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
main::BEGIN() called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
eval {...} called at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 0
BEGIN failed--compilation aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
Can't use an undefined value as a symbol reference at /Users/valeriy/workspace/.metadata/.plugins/org.epic.debug/perl5db.pl line 7596.
END failed--call queue aborted.
at /Users/valeriy/workspace/ROBO-PROD-RA-685/src/lib/test/Val_test.pm line 0.
(of course IP address changes dynamically for each VPN connection session)…
I was able to prove that this issue is related to 10.9.2 update:
Issue *does not* exist under 10.9.1 (I had to revert back to 10.9.1 to get it working again)
No updates were performed around the same time 10.9.2 update occurred (I verified that using Software Update log)
No configuration changes were introduced around the same time
Reverting back to 10.9.1 using Time Machine (thanks god I had backup !!!) fixed the issue
Steps to reproduce this issue:
In Eclipse, try to use 'Epic' (Perl plugin) to debug any perl script while *not* connected through VPNEpic debugger works
Connect to VPN
Start Epic debugger to debug same script
Debugger *does not* start, and "Timed out while waiting for Perl debugger connection" error pop-up comes up after some time. At the same time, exception stack (listed above) is printed in Eclipse's console
I am programmer/software developer, I work remotely (telecommute) and thus have to rely on use of VPN to connect to company's intranet. Perl - is primary language used by my team, and we use Eclipse IDE with Epic plugin - heavily. Use of Epic's debugger - is a *very large* aspect of my work, I cannot work without it. So in essense, 10.9.2 has *entirely* disrupted my ability to work! It took me almost a week to get back to normal work environment, and I cannot afford to let it happen again... I need Apple's development team resolve this VPN related issue, as soon as possible! Because of this issue, I am *stuck* with 10.9.1 and can not upgrade my laptop to any other versions. In fact, I had to disable system updates - just so I do not run into this issue again... I contacted Apple's Tech Support on 02/28 with this issue (Ref: 582428110), asking to raise trouble ticket. Since then, I tried to follow-up on that issue, but do not get any information. Please advise on the status:
is there a trouble ticket to track this issue?
is there any progress?
what's the ETA for an update that fixes this problem?
- Val
Message was edited by: vpogrebi

Am I the only one experiencing this issue ???

MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

Sounds like you may have been in extended display mode. If so, all you had to do was drag a window to the projector display. Or, if you wanted mirrored mode, in display preferences select check mirror display.

I have iphone 4 and want to delete some contacts while connected to itunes?

Hi there,
I have iphone 4 and want to delete some contacts while connected to itunes?
Please help!

Thankyou,
But I was hoping to have all my contacts on the computer screen and do it that way. Is this possible or have to do it on the iphone only?
thanks again

Issue while connecting from Biztalk adapter to SAP ECC 6.0

Hi Friends
Issue while connecting from Visulal Studio 2005 to SAP ECC 6.0 throgh Biztalk adapter2.0, even if we pass the correct login details, system is throwing an error like incorrect user/password.
Can you please tell anybody the solution for this.
Regards
Praveen

HI,
is there a special "formation" to put in the user / pass ?
maybe a missing domain ? or missing values like "/" or "\" ?
Do you getting this error in the Biztalk Monitor (Visual 2005) ?

TS1424 while connecting to itunes error occuring code 11556

while connecting to itunes error occuring code 11556 so plz send details to rectfy

Hello Negaz
When you uninstalled iTunes, did you uninstall it by using the article below or just uninstalled iTunes? The best practice is to remove not only iTunes, but also other associating software in the order that the first article give. If that does not work, then check out the second article for more troubleshooting options for connecting your iPhone to your computer.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G.

While connecting to itunes mesgae appears the SIM card inserted in this iphone dose not appear to be supported what to do

while connecting to itunes mesgae appears the SIM card inserted in this iphone dose not appear to be supported what to do

I'm sure someone will reply to one of your two OTHER nearly identical threads.

Dear All Has anyone found a break through with the issue of Connect to itunes to use push notifications

Dear All Has anyone found a break through with the issue of Connect to itunes to use push notifications

Did you get any help on this? From what I can see from surfing this site, it's a BUG that no one has offered a solution to. It sometimes happens after a 'reset' and going to ITunes does not offer a way to 'set up push notifications'.

I have a iphone 3gs. while connecting to itune, it advised me to upgrade the phone to ios 6. ii downloaded and upgraded the phone to ios 6.but the phone is not going for set up and not reading the sim. Please advise.

i have a iphone 3gs. while connecting to itune, it advised me to upgrade the phone to ios 6. ii downloaded and upgraded the phone to ios 6.but the phone is not going for set up and not reading the sim. Please advise.

YOu'll have to restore, nothing else you can do.
If you have an older backup you can restore to that.

Syncing issues with the new iTunes..

Hi,
I just downloaded the new iTunes (11.0.1.12) and am facing some sunc issues.
In my previous itunes, when i would download an app to my iPod over wifi and then connect it to my PC, iTunes would automatically sync and maintain a copy of the app in my PC. My iPod and the PC would be in sync.
But now after I've downloaded this latest iTunes, I downloaded an app to my iPod and when I tried to sync with the PC, the app no longer got copied to my PC. I've tried syncing many times. Its there on my iPod but never gets copied to the PC during sync. Why is is this happening?
Help!

There aren't any issues with the new iTunes. You need the most recent iTunes to sync your iPod

Syncing issues while connected to itunes

Similar Messages

Maybe you are looking for