Syncing my Palm Z22 with newly purchased Apple Mac Pro

I have just bought a Mac Pro with the latest Snow Leopard OS. I downloaded the Z22 app and was able to transfer data held on the Z22 with the Palm address and calendar that came with the download. However l want to sync with i cal and the Mac address book rather then use the palm address and calendar. I would be grateful for any advice on this please?
Post relates to: Palm Z22

We do not support Snow Leopard(10.6) Macs. If you want to sync with iCal and Address Book the best solution would be Missing Sync from Mark Space.
http://www.markspace.com/products/palm/palm-sync-software.html

Similar Messages

I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

I have Adobe Photoshop Elements 10 and Adobe Premier 10 loaded on a Dell PC. Do I need to uninstall from the Dell before I install on a recently purchased Apple Mac Pro? There are separate disks for Mac and PC in the package.

Generally, it's ok to install on two machines as long as they are both yours and you only use one version at a time.
BTW, this is the forum for Adobe Contribute.

How can I sync my Palm memos with my iBook/Apple application(s)?

Hi, I used to sync my Palm Tungsten E2 with my office PC (to Lotus Notes via Intellisync, a 3rd party system - not a good experience). I gave up and recently set my Palm up to sync with my iBook G4 at home. However, I've discovered that iSync only syncs Contact and Calendar information, at least that's how it appears. I want to also sync my Palm memos, a Palm application that I use extensively. Does anyone know how I can do this? I haven't been able to figure out a way to do this in iSync, at least not a way that is obvious. Thanks in advance for your advice...
And yes, someday I will get an iPhone so this is all moot! But until then...

Welcome to Apple Discussions.
To enable memo synchronization with your Palm device, simply drag the following pair of conduits…
• Memo Conduit
• Memos Conduit
…out of the Disabled Conduits folder where the iSync Palm Conduit installer placed them, and back into the active Conduits folder. This will re-enable memo synchronization to the Palm Desktop application.
And, don't count on the iPhone resolving your issues: there is no synchronized equivalent to the Palm memo capability in the iPhone and iTunes.

Hot Synching Palm Z22 with 64 bit Windows 7

I just purchased a new Sony Vaio running 64 bit Windows 7 and I'm unable to Hot Sync my Palm Z22 to my computer. I've been a Palm user for years, with my current one being my 3rd model and it's been my lifeline but I'm highly agitated and frustrated that the Palm folks haven't posted any updates to handle my current situation. Everything I read here indicates spending additional money to go the infrared route and some people aren't even having success while others struggled a long time to make it eventually sync. Does anyone out there have an identical situation as mine, who'd be willing to give me sound advice as to what I need to do and how to do it in order to get my Palm to communicate with my 64 bit Windows 7 platform? Thank you to anyone who's able to assist.
Post relates to: Palm Z22
This question was solved.
View Solution.

@MrCobol:
This subject has been discussed and beaten to death in many other threads here. The facts (again) are:
1. Palm sold the rights to Palm Desktop many years ago. Railing against Palm/HP makes no sense. If you want an update, complain to Access of Japan. They are the owners of the software, and they chose to drop the ball.
2. Many other companies have struggled to come up with 64bit drivers for their existing software (that they actually own!)
3. Palm OS devices were EOL'd quite a while ago. They were supported through Vista 32 bit. Microsoft changed things, and you chose to buy a 64bit system. HPalm has moved on to a whole new OS and devices, and support for PalmOS is nearing an end.
Yes, it would have been great if Access stepped up to the "plat" and provided a 64bit version of Palm Desktop, but that didn't happen. Workarounds have been provided on this forum by devoted users, and they do work!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.

Syncing a Palm V with a MacBook OS X 10.5.6

I have just upgraded from a Mac Powerbook G4 running OS X 10.4 to a MacBook running OS X 10.5.6. I had been able to sync my Palm V with the Powerbook without any problem. I am not able to get the sync to work on the MacBook. Can anyone provide a solution?
Post relates to: Palm V
Post relates to: Palm V

So I just got back from working with the Mac Genius on the syncing problem. I took both my PowerBookG4 and my MacBook. He pointed out the when I connected the USB travel sync device to the PowerBookG4 while HotSync/Conduitsettings was open, there appeared an icon called "serial connection" which DID NOT appear in the conduitsettings list on the MacBook (only USB and PalmConnect). Obviously this other icon "serial connection" is needed to make the sync work. So... why does it not appear when the USB cable is connected to the PowerBook?
Well, his theory (assuming that the Palm software is working exactly the same on each) is that something is preventing the Palm software from connecting to the handheld (and hence popping up that serial icon) and didn't think it was on the Mac side for the following reasons... He pointed out that when you go into system profiler on the MacBook is DOES show a serial connection that is definitely the USB travel/sync connector (we confirmed that by plugging and unplugging and there was a definite recognition) and it DOES power the device. Hence we can assume that the port is open and ready to receive... that it's not the MacBook port or drivers that are causing the problem.
He thought the engineering of the travel USB sync cable might be such that its drivers (he said it would have drivers) were somehow not compatible and not allowing the handheld to talk to the computer. He suggested talking to the manufacturer to see if there was a later version, or perhaps a more updated cable made by Palm or someone else that has a USB connection that might work.
Another test he suggested is to get a serial to USB connector onto the original (heavy) handheld cradle (which only has a serial connector) and see if the original cradle, when put into a USB connector is capable of talking to the MacBook.
That's were I am so far... Anything from your side?
Graham
Post relates to: Palm V

I cannot convert a pdf to work with my newly purchased adobe acrobat pro XI

i cannot convert a pdf to work with my newly purchased adobe acrobat pro XI

Sorry I cannot convert pdf to Word document (typo)
Richard Gabai
Please note my new email address: [email protected]<mailto:[email protected]>
UnionPay International
208 Plaza 10, Harborside Financial Center, Jersey City, NJ 07311
Office (201) 577 5479 / Cell (917) 860 2642 / Fax (201) 577 5480 / UnionPayInt’l.com<http://140.207.194.112/column/en/en_ylsy/index.shtml>
cid:[email protected]
This e-mail contains information that may be confidential and/or proprietary. It is intended solely for the addressee. Access to this e-mail by anyone else is unauthorized. If you are not the intended recipient of this transmission, any disclosure, copying, use, or distribution of the information included in this e-mail and any attachments is prohibited. If you have received this transmission in error, please notify us by reply e-mail and permanently delete all. Thank you.

How can I sync my husbands iPad with a different apple id with my ical?

How can I sync my husbands iPad with a different apple id with my ical?
He just got an ipad and he has a seperate Apple id, and we need to sync the address book and the ical togeher?

You can add your iCloud account to his iPad as a secondary account to his primary account (settings > mail, contacts, calendars) and enable just contacts and calendars.

Since purchasing my Mac Pro with retina display, I can no longer change the preferences on MP Navigator for Canon MX870. Help?

Since purchasing my Mac Pro with retina display, I can no longer change the preferences on MP Navigator for Canon MX870. I can change them on my old Mac Pro with Lion, but not the new one. I can scan but I can't save it to a folder on my hard drive. I can only let it default to a back up date folder. Tried all sorts of things to change the preferences and folders, nothing worked. Ideas?
Stephanie

To prevent your iPhone from automatically syncing when you plug it in, click on iTunes in the menu bar, then preferences, then "devices", then tick "prevent iPhones, iPad's and iPod's from syncing automatically".
Plug it in, then on the iPhone sync summary screen, click "info" along the top.
Make sure the "sync contacts" option is not ticked. as long as it's not ticked, then it won't sync with your mac's contacts but will still include them in backups.
Also, if you use iCloud, make sure that the iPhone/mac are either not signed into the same account, or that "contacts" is not turned on for both of them

2008 Apple Mac Pro with SAPPHIRE TRI-X R9 290 4GB GDDR5 OC (UEFI)

Dear Apple,
Can you please add hardware/drivers support for the Sapphire Tri-X R9 290 GDDR5 OC (UEFI) Graphics cards to the latest Mac OS X 10.10 operating system?
We have a few Apple Mac Pro's that we installed older Radeon 7970 graphics cards in (a few years back) and now we are upgrading the graphics cards to the newest Radeon R9 290 Series cards (Sapphire Tri-X R9 290 4GB GDDR5 OC UEFI).
We chose the Sapphire Tri-X R9 290 4GB GDDR5 OC (UEFI) (11227-00-40G) Graphics cards.
The Sapphire Graphics card can be found here:
http://www.sapphiretech.com/presentation/product/?cid=1&gid=3&sgid=1227&pid=2091 &psn=&lid=1&leg=0
We have been trying to figure out how to get this graphics card to work with the latest OS X 10.10 Yosemite. We are installing two Sapphire R9 290 graphics cards per machine.
We want to make sure that the OS X drivers support multiple monitors, CrossFire, as well as HDMI audio, and support GPU hardware support in the latest OS X 10.10 Yosemite.
Has anyone managed to get the Sapphire Tri-X R9 290 (SKU ID: 11227-00-40G) working in a 2008 or 2009 Apple Mac Pro?
We have 24 Apple Mac Pro's and we purchased 48 of the Sapphire Tri-X R9 290 graphics cards (to install into the Apple Mac Pro's) and we're trying to figure out how to add driver support to OS X for the Sapphire Tri-X R9 290 / Radeon R9 290 to the latest Mac OS X.
If I go into the "Graphics/Displays" Hardware section it shows that the Sapphire card (in Slot 2) is installed, but it only displays the name "Display".
The properties of the Sapphire Tri-X R9 290 graphics card are:
Vendor: ATI (0x1002)
Device ID: 0x67b1
Revision ID: 0x0000
Kernel Extension Info: No Kext Loaded
Any ideas as to how to install hardware drivers to get these graphics cards to work properly in OS X 10.10 Yosemite and to enable GPU hardware support in OS X and also enable HDMI Audio?

Over a YEAR has passed, and we still can't get Apple to add the latest hardware drivers for the newest/latest AMD Graphics Cards (AMD R9 290 series).
We have contacted AMD, and Sapphire, and everyone has pointed their fingers back at Apple, and said that Apple is the only ones that can add the latest graphics drivers to their Apple OS X Operating System.
So the problem lies on Apple, and Apple refuses to update it's operating system to support the newest/latest hardware.
AMD pointed us right back to Apple and said that it's Apple's OS X Operating System, and that it's Apple's job to add and write the newest/latest graphics display drivers to their OS X operating system.
AMD says it's Apple's fault. Sapphire says it's Apple's fault. Apple just refuses to do anything, and ultimately it's Apple's operating system and Apple's closed-ended ecosystem that refuses to allow customers/users to upgrade their Apple Mac Pro computers to the newest/latest hardware.
In the end, I guess the only solution is to abandon Apple Mac Pro products, and just start purchasing "Microsoft Windows PC" computers that we can upgrade and that have PCIe slots that we can just swap out the graphics cards (every year) with the newest/latest graphics card hardware.
Here: http://forums.amd.com/game/messageview.cfm?catid=440&threadid=181379
Here: https://www.sapphireforum.com/showthread.php?33574-2008-2012-Apple-Mac-Pro-with- SAPPHIRE-TRI-X-R9-290-4GB-GDDR5-OC-(UEFI)&p=277467#post277467
Apple seems to be a "dead end" and they don't support their high-end customers and don't seem to support Apple Mac Pro (high-end) users. Apple only seems to be concerned about selling iPods and iPads and iPhones, and they've abandoned their HIGH-END Apple Mac Pro users that want HIGH-END workstations for professional use.
I guess if you want a high-end workstation, you have to go back to buying a Microsoft Windows PC, and start going back to using the Adobe suite, and just completely abandon Apple and Apple products all together. (Apple is not in the business of designing or selling "high-end" products anymore). Apple just designs low-end "overpriced" hardware, that you can't upgrade, and must toss in the garbage every other year, because you can't upgrade it.
Apple has been heading this way for years, and the newest/latest "Black Shiny Trash Can" (that is NOT upgradeable and has no upgradeable PCIe slots and no way to even upgrade the video cards) and Apple has turned into a "disposable" computer company/business that just builds "All-In-One" garbage computers (that become extremely outdated and must be thrown away every other year, because they are not upgradeable) and you can't swap out video cards using standard COTS (Commercial Off The Shelf) latest Graphics Card adapters, and we can't even get the latest Mac OS X operating system to support the newest/latest graphics display hardware, it seems like our only choice (as others have stated before) is to abandon Apple products and begin moving/migrating back to Microsoft Windows 8.1 Pro machines.
We can't get Apple to support their customers or update their operating system or support the newest/latest hardware in their operating system, so it seems to be a "dead end" ecosystem, and Windows 8.1 Pro and using standard PC hardware is probably a much cheaper/affordable route and it's a long-term solution, because Apple seems to come out with one nice product (every ten years) and then they don't support the product or it's users, or don't follow-up with Apple OS X operating system upgrades, and then you are stuck with very old outdated hardware because you can't even get the newest/latest drivers for the latest graphics cards/hardware.
The only solution is to boot directly into Windows 8.1 Pro, and use Windows drivers, but then why even own a Apple Mac Pro if we can't use Apple OS X and can't even use our OS X software, and the only solution is to use our Apple Mac Pro as a Windows PC?
We're really disappointed in Apple and how Apple fails to update Apple OS X and fails to support the latest graphics cards (such as the AMD R9 290 graphics card).
I think 2014 is the last year that we are going to deal with Apple. Starting in 2015, as part of our 2015 New Year's Resolution, I guess we'll start e-baying our Apple Mac Pro equipment, or selling it (as salvage) and begin purchasing standard Microsoft Windows 8.1 Pro high-end workstations, and get away from the old legacy dead-end Apple garbage hardware and dead-end Apple OS X operating system.
It shouldn't be this hard, just to get some graphics drivers released to support the latest graphics card (which has been out for over a year now). The Radeon R9 290 graphics cards were out in mid 2013 (for over a year and a half, almost 2 years now...) and we are already coming up on 2015, and Apple still hasn't added drivers support for the R9 290 series graphics cards to it's latest Apple OS X 10.10.1 Yosemite.
It's a shame, but Apple has really gone downhill over the past few years. Nothing but really old and outdated hardware, and even their "latest" Apple Mac Pro is 2-3 year old hardware (that Apple is marketing as "new") and it's non-upgradeable, and you can't even run/install the latest graphics cards into it.
Apple is dead-end and it's not a place for "high-end" users anymore. I guess Apple doesn't care about it's "high-end" user market anymore, and is just interested in designing silly iPhones and iPods/iPads.

Is the Apple Mac Pro RAID card (v 2.0) compatible with the Mac Pro (v. 1.1)?

Hello,
Just wondering if any of you experts know if the Apple Mac Pro RAID card (v 2.0) is functional with the Mac Pro (v 1.1)?
I have an original Mac Pro and a new (black) Mac Pro RAID card. I would like to know if I can get any functionality.
I initially thought that the only difference was that the later RAID card did not have the same limitations on the HDs. I am aware that my original Mac Pro has a SATA II bus rather than a SATA III bus- but I am hoping this will not present any issues other than speed.
I am currently using Disk Utility for a striped software RAID (0) but would like to move to a parity hardware RAID (5); hence the purchase. If this isn't possible I'm not overly concerned as I managed to get hold of the RAID card for next to nothing so thought I would take the chance.
Any feedback would be appreciated as everything I've dug up online over the past few days has been a little inconclusive.
Julius.

The black-substrate card requires a 2009 or later model, and works only in slot 4, which has a special connector for it there.
The blue-substrate card requires the ipass cable and connector feature in the 2008 and older models.
These cards are both showing their age, and limit drive size to 2.2TB each. Their data-backup batteries have been extremely troublesome. You should probably look at other alternatives as well.
Mac Pro RAID Card: Identification and compatibility

I have a 2009 Apple Mac Pro with no windows,can I surf the web on virgin media wifi

Can I surf the web on the Apple Mac Pro with out windows on Virgin media wifi

What are you asking? Are you saying you do not have Microsoft Windows on your computer? If so, Microsoft Windows is not needed to surf the Internet. Or, are you saying that the site you are surfing to requires Windows Internet Explorer which you do not have?
Rephrase your question being more specific as to your issue.

I have an iPod which i currently sync on my iMac, I want to sync it on my Apple mac pro, how do I do this? Is there a way of doing this without restoring my iPod?

I have an iPod which I currently sync on my iMac, but I want to sync it on my Apple mac pro, how do I do this? Is there a way of doing it without restoring my iPod?

Post here:
https://discussions.apple.com/community/ipod

As iMac user upgraded to Mountain Lion and lost all Legacy connection with years of Apple/Mac data storage. How can recovery since every default says "no longer supported, After years of Mac software use now it is not accessible ??????

As iMac user upgraded to Mountain Lion lost all Legacy connection with years of Apple/Mac data storage. How can recovery since every default says "no longer supported, After years of Mac software use now it is not accessible ??????

Please provide more details. What version OS X were you using?
Are you saying that Mail faIled to upgrade and you lost your old mail?
Are you asking about PowerPC applications that require Rosetta to run like AppleWorks and Microsoft Office 2004?

Hello, I have an apple Mac Pro. It is an older machine but I just had the Apple Store install a new drive with OSX 10.6.8. It runs great but I need to load software. Will it run CS4 Design Standard? Or, will I need CS5.

Hello, I have an Apple Mac Pro Laptop. It is an older machine but I just had the Apple Store install a new hard drive with OSX 10.6.8. It runs great but I need to load software. Will it run CS4 Design Standard? Or, will I need CS5. This machine can't run 10.7.

Hi There,
As per CS5.5 Design Standard release notes it can run on 10.6.8.
Kindly try to install in and share the results so that we can assist you if needed.
Please find the download link in my previous post.
Thanks,
Atul Saini

Syncing my Palm Z22 with newly purchased Apple Mac Pro

Similar Messages

Maybe you are looking for