Syncing not working correctly

For the past few days, my syncing has been on the fritz. It is not syncing really at all. It will only go through 4 steps instead of the 5 and when I purchased a new song (on my iphone 5 itself) it doesn't even show in my recently added, which I have never had a problem. I have tried deleting all the music off the phone, and even a hard reset and nothing seems to be working. Also, when it gets to step 4 (saving changes) it takes forever to finish. Any ideas?

Click on the video to select it, then choose File->export->make sure that "original file format" is selected and hit ok. After that your file should show up as IMG_xxxx.mov .

Similar Messages

Firefox sync not working correctly

I set up sync and used my favorite gmail address (sun-).
It seems I should have used the gmail address I set up my google/gmail account with ( allu-)
Now it seems I have sync on my computer, and my tablet, but I'm not sure. I know this sounds weird, but when I have sync set up on my computer, and I go to pair a device (my tablet) I have sync numbers in both my computer, and my tablet, and I am unable to erase the 3 boxes to add in numbers to either device.
I still would like to add my android phone, but I would like to fix this problem.
I guess what I would like to do is delete/uninstall my 'sync' account so I can start new with my google/gmail account (allu-).
I thought i did this, but the same thing came up, numbers in both sync set up pages on my computer, and tablet.
So maybe I have this entirely wrong, and I need to look at it from another perspective, but whatever reason, it is becoming frustrating because I need this, want this, and can't make it happen. So I would like, no need some help with this, so I can coordinate all my devices with Firefox.
I am thinking this is possible with what I read, but like I said I am definitely missing something, or I have made some mistake, that can't be fixed, because that is what I seem to have done. HELP

That seemed to work. I have not tried to sync my other devices yet, but I am hopeful.
It almost looks like you are saying the Aurora version 28 is a version to switch to, when it is released.
Will I be notified by Mozzila when this comes out?
I know I might be taking advantage of you with these questions, but it is hard to find good answers without spending lots of time searching here, there and everywhere, so to speak.
So one more question, how come my password saving has stopped. It worked in the past but as of late, it sporadically asked me if I want to say updated passwords, and then it doesn't. I have a few sites, that use to have there passwords saved, and now I get nothing, very frustrating.
So is there anything I can do to get my passwords back.
I have switched from Ice Dragon when that didn't do well with passwords, then tried Chrome, I liked that as well, but then I realized that wasn't doing as good as Firefox did for me, so now I am back to Firefox, and that is not working very well either
Thank you for what you do.................................
Mike

Album sync not working correct

Hello everybody,
i use the Photos app since the first Beta and i think that there is potential to be a good App. (IOS really needs the possibility to delete only the local picture an not the one in the include )
Now i updated to the new Yosemite and try to sync the pictures from iCloud. Everything works fine, except my albums.
My Albums are sorted like this:
- Cars
-- Car 1
-- Car 2
-People
-- People 1
-- People 2
-Meeting
-- Meeting 1
-- Meeting 2
- Events
-- Event 1
-- Event 2
On my iphone everything works fine. I See all picture an albums.
On Photos first everything was fine but suddenly after a restart all Albums were gone. I tried to sync them into a new library but all i got was maybe 1/3 of my albums like this:
- Cars
-- Car 1
-- Car 2
-People
-- People 1
-- People 2
All pictures are synced right...
It was the second time now that they gone and i really don't want to tag the faces and the Albums new all the time
hope somebody can help me...
Hope somebody can help
greets
Rigo
P.S. I have a backup library... maybe i can copy the album/faces files from there ?
EDIT:
The Photos.App shows that everything is up to date (Albums still not shown)
Message was edited by: DaReelRigo

Good luck. I had duplicate albums created also, but am also missing a lot of pictures which do not sync over to other devices or to the web based Photos. I have deleted the Photo library and forced it to import from iPhoto a second time, but the same pictures are missing and have even more duplicate albums. Fortunately I am not doing this with my primary photo library so I can just delete everything and go back to iPhoto.

Aperture to iPhone sync not working correctly

When sync'ing photo's from Aperture to my iPhone 6+ , I have filters that work perfectly in Aperture, but I still end up with photo's I shouldn't have (should have been filtered out) sent to my iPhone.
is this a known bug?
How do I fix this?
Thanks,
Mark

Ignore what Apple have said about my iPhone. it's a 6+ with iOS8.

-contact sync not working correctly

Frustrated w/my i4. spent 4 hrs w/verizon and 1 1/2 @ apple store. still issues. my contacts denote contact duplication (some, not all, have duplicated 3 times). Also, experienced lost contacts (my kids, some biz associates).
Apple conducted hard reset...and when I plugged in, there was an error message...and then the contact duplication.
NOW...the mobilme has an error "contacts could not be synced due to inconsistent data. (says to go to the Preferences to confirm. not much to confirm as it only asks for order (last or first name sort) and phone numbers (will format automatically).

Hello and welcome....
(says to go to the Preferences to confirm. not much to confirm as it only asks for order (last or first name sort) and phone numbers (will format automatically).
I think that message is referring to System Preferences on your Mac. (Applications/System Preferences). Make sure have the boxes checked for the items you want synced and select the box next to: Synchronize with MobileMe.
the mobilme has an error "contacts could not be synced due to inconsistent data.
Try resetting sync data.
Open System Preferences then select the Sync tab. Then click the Advanced tab.
Click: Reset Sync Data
Click: Done.
Restart your Mac and your iPhone.
Carolyn

Generic sync not work correctly

Hi,
We are trying to get the inbound container in Java application, we use the method
GetElementsWithFieldName(String) in the object InboundContainer, this method returns an array that has only one entry, but really the wrapper function in R3 returns 6500 entries.
Best regards.
Thanks all.
SCZ

hi Satur,
Is your Generic Sync Application Synchronous? you may find it in using the OutBoundContainer Type. if it is TYPE_OUTBOUND its asynchronous otherwise (TYPE_REQUEST) its synchronous. The same information can be found in MESYHEAD table entries too.
If it is Asynchrnous, then the MESYBODY Containers won't get deleted unless you sync from the client. if it is synchronous, it will disappear immediately.
I suggest your application be ASynchronous and check the same. If it still happens, there's some problem with your middleware. It is not taking the container as ASynchronous Processing. You'll have to go all over your Post-Installation Settings to check if all are right. (Tedious process indeed)
If it is synchrnous and your client is not receiving all the entries, the problem is with your receiver code handling. check your Process() method.
Regards
Ak.

The calendar sync is recently not working correctly, not display "All events" but it only displays the last six months for my individual entries. My repeating entires do go back further, though. How do I fix?

I have an iPad 5.1.1. The calendar sync has started to not work correctly. I have it checked "All events," but it only displays the last two months for my individual entries. My repeating entires do go back further, though. How do I fix?

HI Jason269. Thanks for your reply, however I wrote that I already have "All events" checked. If All Events is checked and it doesn't diaplay all events, how do I fix? It seems this is a common issue, as I have read many others on here state the same problem.
I believe my problem occurred when I synced my iMac calendar to my iPad calendar using yahoo. Yesterday, I unsynced them on my iMac controls. When I checked my iPad calendar, all of my old entries reappeared - but only for five seconds and disappeared again. So, the data is saved and still there but cannot be displayed, even when I have All events checked. In fact, it only shows my individual entries for the last two months, but does show all my recurring entries. If I switched to last six months, I will see everything for the last six months. If I switch back to all events, it is only for the last two months.
As I mentioned, others on here have expressed exactly the same issue, including the two month example and having used yahoo.
For legal purposes, I need to be able to use the information from my indidual calendar entries in an upcoming court case. So I really need to fix this ASAP!

Wifi Sync not working on iOS 6 and iTunes 10.7 with iPhone 4S

I am running Windows 7 64-bit but WiFi Sync is not working on either my iPhone 4S or my wife's iPhone 4S. Worked fine before upgrading. All settings look correct in iTunes 10.7 and on our iPhones 4S's. Already tried uninstalling iTunes and all associated Apple programs (Bonjour, Apple Mobile Device Support, Apple Application Support, etc) and reinstalling iTunes but no help. Temporarily disabling Norton Firewall did not help. If I hook up either of our two 4S phones via USB wire, they Sync and Backup fine. Just WiFi Sync not working. Can't initiate sync from iPhones because button is ghosted stating it is waiting for PC to be present. Phones don't show up under Devices in iTunes unless hard-wired via USB cable. Any suggestions?

I am getting sync issues too (although on OSX) - seems like others are getting issues too:
https://discussions.apple.com/message/19834721#19834721
Good luck,
Chris

Exchange 2013 - 2007 coexistence - activesync 2007 does not work correctly

Exchange 2013 SP1. On going Saga- Last night we cut over to full co-existence with DNS changes for use of legacy namespace and had to roll back again. We had only two issues but one was considered a show stopper.
The main issue was that Active Sync would not work correctly for 2007 users. It failed the exchange connectivity test and would only work on a device if the domain was entered - or if the legacy namespace was entered manually. That would have meant
chaos for several thousand users so we rolled back. (It worked perfectly for 2013 users).
The error given by the test was "foldersync failed" when I drilled down into the detail. It found autodiscover but failed after the initial handshake. (All other tests passed for 2007 and 2013 users)
We tried:
1. Populating both Autodisover internal and external urls with the legacy namespace
2. Populating only the internal url and leaving the external blank (both 1 and 2 had the same result)
3. Leaving both URLs blank to force 2013 to proxy to the 2007 cas (totally broke it- would not resolve at all)
I don't know if this is related but SSO is failing for 2007 OWA - two prompts.
Environment notes- all internal co-existence is working and the internal LTM F5's are working. Externally we use 2 GTM F5 to the LTM f5's to Ex2013. 2007 has SSL being passed through all the way to the CAS. Servers are split into CAS and MBX over 2 DC's.
Everything else externally was working when we cut over.
any and all help appreciated
Tony

Hi,
Glad to know that you have found the solution.
Thanks for your generous sharing.
Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support

10.9.2 Mail not working correctly

I'm the only person in the office to upgrade to 10.9.2 (thankfully!). Since then, Mail has not worked correctly. It is an IMAP account.
When I click on an existing message in my inbox, instead of displaying instantly it takes 3-4 seconds. The screen scrolls light grey, dark grey, light grey, dark grey then the message. I can live with this but it's very annoying.
But worse, I now cannot perform any mail searches to refer back to existing messages I have in any of my mailboxes. Search functions 'to, 'from' 'entire message', 'any' do not work. Even if the message or sender is in the inbox, it can’t find it. This is serious as I'm constantly using this function.
Many thanks if you can help.
Simon

My wife is having the exact same problem all of a sudden with gmail on her MacBook Air. Also running 10.9.2. Everything is running perfectly on the iPhone, but on the Mac, no new email is downloading and the inbox is not syncing.
Hoping someone can help. Thanks!

ITunes not Working Correctly

When I use iTunes without connecting my iPhone, it seems OK. When I connect the iPhone, after the sync has been performed, I get a message that my iTunes is not working correctly and has to be closed. Is anyone else having this problem or know how to address it.
Thanks.

Thanks. Before I saw your reply, I shut down my iPhone fully, restarted it (I had to reset the defaults) and reconnected. The problem did not reoccur. It also seemed to correct a problem I was having the "weather" function on my iPhone. Thanks again.

Need help iPhone 5 not working correctly

my iPhone 5 keeps pressing all the keys around the key I want it to press on the keyboard also problems using lock screen numbers have re-started and the phone just reverts to not working correctly
also when I got this phone I did it from a back up of my old iPhone 4 but not all the songs have fully downloaded (they are there, but cannot play) when I look on iTunes it says I have no songs that arn't on my iPhone that I've bought?
Should I take my phone back to my carrier which is 3? Or make an appointment at the Genius Bar?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).
Backups do not contain media, all the media should be in iTunes on your computer. Simply select the content desired to sync to the device and sync.

TS4062 Wifi Syncing not working

I have an iPod Touch 4th Gen and it will not let me sync through Wifi

Howdy Rythmwolf,
It sounds like your wifi syncing option is not working correctly. I found this article for you while researching issues with wifi syncing, and want to recommend the troubleshootings steps it has for the issue:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/TS4062
Here is an overview of what the troubleshooting will entail:
1. Verify system requirements
2. Make sure Wi-Fi Syncing is enabled
3. Quit and reopen iTunes and restart your iOS device
4. Restart your network router
5. Check your network connection
6. Check for network interference
7. Check firewall settings
Thank you for using Apple Support Communities.
Cheers,
Sterling

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
     <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
     </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
    hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

Syncing not working correctly

Similar Messages

Maybe you are looking for