Syncing offline files remotely with out using VPN & other applications

Hi
How can i setup the user (Windows 8.1Pro) which is part of the domain to make them access to the files and folders on the server and sync back remotely on a Windows 2008R2 Server.
These files & folders should be shared between 3 users.
Please let me know
Thanks

Hi,
Do you want to configure offline files on the Windows 8.1Pro or on the Windows 2008R2 Server? The Offline Files feature must be enabled on the client computer for files and programs to be automatically cached.
You could refer to the articles below to configure offline files on clinet computer:
Working with network files when you are offline
http://windows.microsoft.com/en-us/windows/working-with-network-files-offline#1TC=windows-7
Configure Offline Availability for a Shared Folder
http://technet.microsoft.com/en-us/library/cc755136.aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Same file name from sender to receiver file adapter with out using UDF

Hi All,
I am working on FILE TO FILE. My requirement is same file name from sender to receiver file adapter. Is it possible to do using only Adapter Specific message properties? i mean with out using UDF.
Thanks
Karthik

Hi,
>>>Is it possible to do using only Adapter Specific message properties?
yes
just enable Adapter Specific message properties in sender and receiver channel for file name
and you're done
Regards,
Michal Krawczyk

I have Ipod touch and now an Ipad2, can I sync both of them with out use of a computer?

I want to eliminate laptop. I have a Touch for work and I just got an Ipad2. Can I sync the touch and Ipad without use of computer & if so how?

I had a felling, but I figured I would ask to be sure. Thanks for the help.

How can we do the Testing in Idoc to File Scenario( With out using We19)

Hi All,
As all we know we can generate the Idocs from SAP R/3 to XI using the change Pointers,this we will apply in Production time.
But as of now in the Test system we can'd do it daily.
So we have already created materials in the SAP R/3 system.
I want to send the Idoc to XI by selecting some n number of materials.means i want to generate the Idoc for materials.this is like i have to do repeatedly for testing purpose.
Is there any T-code
How can we do this
Regards

Hi Vamsi,
   For the Message Type ORDERS you can configure Output Type (txn NACE) for IDoc generations and then you can trigger the IDoc using transaction WE15.
Selection Parameter will be as follows
Output application: This will be from Output Type
Object key          : Order Number
Output type         : Output Type name, that you configured
Transmission medium : A
Check the checkbox "Send Again".
Thanks,
Punit

How do you add/record audio in Keynote on your iPad with out using any other apps

I need to do this for a project, but it on my school iPad and I don't have many available apps to use like voice memos, and I can't download any apps. But I can email myself a voice memo recorded on my iPhone

You have posted in the wrong forum, this is Keynote Mac,
you should ask your question here: iOS forum

DWCC File:Open tries to use EVERY OTHER APPLICATION to open file

Hi
I'm on Dreamweaver CC and when I go to open a file it tried using my CS6, CS5.5, CS5 and finally CS4 versions of Dreamweaver to open the file (a .cfm file). I uninstalled ALL of those files and now, when in Dreamweaver CC I go to File: Open it automatically opens Apple Numbers, attempting to open the file.
Anyone know how to actually open a file with Dreamweaver and get Dreamweaver to actually open it?
Thanks in advance,
Rich

If you don't want to add the Legacy Extension or get the paid extensions from DMXZone, and you're a CC subscriber, you can have both DWCS6 (with database functionality by default) and DWCC installed at the same time under the same subscription (no additional cost). They just don't run at the same time.
Here's how you add DWCS6 through the Creative Cloud...
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html
Maybe if enough people request that the database features get added back, Adobe would return them to the program? It's happened with other features.
Here's the official form: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Error, can't use scanner with in use by other application or user!!!!!!!!!

Ive seen this over time but the only response was to re start, as well some instructions for PC Scanner isc Canoscan lide 210OS is mac osx , mavericks and ysemite and el capitian (beta), same issues on all O/S 's Any please help

Are you scanning from MP Navigator or ImageCapture?
on the 10.9 or 10.10 computers I'd download the ICA driver and the Scanner driver, along with the latest version of MP Navigator from the website and install them, then reboot.
http://usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_lide210#DriversAndSoftware
Try to scan using MP Navigator. If you get the error, close MP Navigator and try to scan using ImageCapture. Do you still get the error?
I'm not including suggestions for El Capitan because there aren't drivers available for it yet, so I wouldnt expect it to work.

Async-Sync scenario with out using BPM

Hi All,
With SP19 we can implement File-RFC-File scenario with out using BPM.
But can any one suggest how can I implement the following File-RFC-File scenario without using BPM.
My input file has five elements. A1,A2,A3,A4,A5
The RFC (BAPI) needs A2 and A3 as input and it produces the output R6.
Now in the destination I need to populate D1,D2,D3,D4,D5,D6.
D1 has to be mapped from A1 and so on till fifth element. D6 will be mapped from R6. In order to achieve this we need to store the value of source interface before calling the RFC so that when we get the response back we can populate the entire destination structure.
Can anyone advise how to go about it. I don't want to use a BPM here.
Thanks
Abinash

Hi
the following thread may help you
Weblog to send Response from RFC to File in Asyn Mode Using Proxy [original link is broken]
File - RFC - File without a BPM - Possible from SP 19.
Thanks,
Ram

Acknowledgement from receiver file Adapter with out BPM

Hi Gurus,
I am trying to get Acknowledgement from Receiver file Adapter with out Using BPM.
Here is the scenario. I am sending files from different Sender Adapters. There is only one target that is File Adapter. After each successfull and failure transaction I need an Acknowledgement that needs to trigger another receiver adapter and send the the file name and timestamp to that file.
Hope this is a complicated scenario. Please help me.
Thanks,
Kevin

from sap note 821267
6. Acknowledgements
    * Q: Does the File Adapter support acknowledgements?
    * A: You need to distinguish system acknowledgements (indicating that a message has been received by the target system) and application acknowledgements (indicating that the message has been successfully processed by the application on the receiver side).
           The receiver of an XI message will only send an acknowledgement back to the sender if the sender has requested one. However, the File Adapter has no functionality that relies on the receipt of an acknowledgement, so it never requests one.
           On the other hand, if a File Adapter Receiver receives a request to send an acknowledgement, it will do so for a system acknowledgement request. Application acknowledgements are not supported at all as the File Receiver has no way to determine if the written file has been correctly processed by the back-end application, which is what a positive application acknowledgement would imply.
this means that your requirement is ideally not possible without a BPM

How do I view ipod music files with out using I tunes?

I trying to view my Ipod music files without using itunes. But when I conect my Ipod to my pc I can only view contacts, notes, and caladar through the driver.
How do I view ipod music files with out using I tunes?

they should be under ur my music folder if u have windows

Adding data file with out using brtools /sapdba

Hi all,
How to add data file to table spaces with out using brtools /sapdba.Please let meknow.
Satya.

why would you do that? whats your requirement?
You can use sql commands (I prefer doing it via brtools),
example
alter tablespace <name of the tablespace> add datafile '<path of the datafile>' size <size in Mb>M autoextend <on/off> next <size> maxsize <size>;
regards
Juan

How to sync 2 different Mac users using the same Apple ID and with out mixing each other info?

How to sync 2 different Mac users using the same Apple ID and with out mixing each other info?
We are two people using three difrent Macs, 1 Iphone and 1 Ipad with separate USERS on each Mac but sharing the same Apple ID: xxxxxx
I set up the first user to iCloud and it was OK but when I set up the second user to use iCoud the first users's info gets mixed with the second user's info?
Do we have to set up a diffrent Apple ID for each other?
Sometime ago I added my friends E mail (yyyyy) to the main Apple ID (xxxx) as for using his E mail account (to separate our e mail accounts, and it's working ok) but now when I try to create a new apple ID whith the same friend's e mail (yyyyyy) it says that his mail (yyyyy) is already an apple ID when the Apple ID is really my E mail (xxxxx)... any clue?
Thanks

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

With out using IDX2.....in file to idoc scenario

Hi Masters,
                   i have one doubt .. Can i send normal file from sender system to sap system in the form of idoc.. with out using IDX2...
if it is possible then plz explain me about the steps .. and also explain me wht is the actual use of IDX2 .. as wel as IDX1,,
if u say in IDX2 we have to load the metadata of the idoc .. then we already uploaded the structure of the idoc in XI system ... then why we are using again IDX2 to load the metadata. i have full confusion now .. plz explain me in details ..
          hoping for quick response ..
               Thanks in advance ,
                   jp.

Hi,
You can send an idoc to SAP system through XI without using IDX2. When u send an Idoc through XI, the metadata will be automatically loaded in Idx2.
IDX1 is used for creating a port in XI for Idoc. This port will be responsible for loading the metadata.
Also have a look at this:
Importance of IDX1
Regards,
Divija.

How To Split File In to Multiple Files With out using B.P.M

Hi Guys,
How To Split File In to Multiple Files With out using B.P.M.
Thanks in advance
Regards's
KIran.B

Hello
below r the links were u will find message spilitting by graphicaaly i.e without using BPM.
/people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool
Sender File Adapter with file conversion Multimapping --file content conversion with split messg mapping
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2748---- [original link is broken] [original link is broken] [original link is broken]
multimappig
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
hope this resolve your problem
thank's
Chetan

How can i invoke a file chooser dialog box with out using input type=file

how can i invoke a file chooser dialog box with out using <input type=file> can any one help me mail me to [email protected]

You could use an applet...
Or maybe Javascript has some way to do it.

Syncing offline files remotely with out using VPN & other applications

Similar Messages

Maybe you are looking for