Syncing on 2 different computors and 2 different itunes?

OK, I have 2 different Laptops and 2 different i tunes libraries. How can I sync both libraries on my nano. Every time I hook up to my other laptop it gives me a warning that all previous songs will be erased.I have made purchases on one of my laptops and I'm not sure if or how I can transfer to my other laptop?

Click here and follow the instructions.
(35378)

Similar Messages

  • I have an iPhone 5, yesterday it wasn't receiving any signal. I reset it and when it cam back on it said plug into iTunes, i did that but now it comes up with error 9006 and 39. What do i do, i have tried different wires, and different plug

    I have an iPhone 5, yesterday it wasn't receiving any signal. I reset it and when it cam back on it said plug into iTunes, i did that but now it comes up with error 9006 and 39. What do i do, i have tried different wires, and different plug in holes, I've left it for the night and tired again this morning.

    Error code 9006 is related to the computer's security software settings, 39 is not listed inResolve iOS update and restore errors try turning the security/anti-virus software off if you are using something like that.  Then you may need to restore via the recovery mode since that is what the graphic of a USB wire connecting to iTunes means, it has already entered recovery mode...see http://support.apple.com/kb/HT1808 for instructions on recovery mode restoring.

  • HT1476 My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones. I'm stumped :/

    My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones and a USB cord that works from the laptop won't work from 3 or 4 different wall boxes that work for others. I'm stumped :/

    Update: It seems as though the phone will charge if I plug it in and then turn it off.  It will not charge while the phone is on.  Also iTunes will not recognize it, so I can't sync or anything.  I read somewhere that it could be a fuse somewhere?? Or maybe the dock connector. Where is the best place to get this repaired?

  • I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?

    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
    Thanks,
    Shir

    sbmgrams wrote:
    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
    See here:
    Reading PhotoDeluxe PDD Files

  • HT4528 Can I put the same information on two different i-phones with different numbers and different ID's?

    Can I put the same information on two different i-phones with different numbers and different ID's?

    Yes and no it really depends on what information you are putting on the devices.

  • TS2771 My ipod touch will not hare no matter what and I've tried many different cables and different ways to charge it. What should I do? If I complain to the Apple store co. will they replace my ipod for free?

    My ipod touch will not hare no matter what and I've tried many different cables and different ways to charge it. What should I do? If I complain to the Apple store co. will they replace my ipod for free?

    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red (!) and says that its no data. I have tried with different cards and different cardreaders, but it

    I cannot import my AVCHD files by using log and transfer. I can see all the files, but when I add the file to import que it doesnt work, the status is a red and says that its no data. I have tried with different cards and different cardreaders, but it is still the same. Why?!

    Please give us more specific information -
    What make/model camcorder are you using?
    Are you absolutely certain this is AVCHD video?  Tell us more about the video settings you used in the camcorder (eg, frame size, frame rate, quality level)
    Why are you attempting Log & Transfer from a card reader instead of from your camcorder?  Have you tried doing Log & Transfer from your camcorder?
    Are the SD cards straight from the camcorder, unaltered, or are you just using the cards as storage?
    Are you using FCE 4.0 or FCE 4.0.1?

  • Sync ipod to a different computer and different itunes account

    I bought my dad an ipod and put a bunch of songs from his CD's on it using my computer and bought him songs from itunes using my account. Now he wants to use itunes (his own account) to put more songs on it using his computer. When we plug it in it wants to sync it to his computer and says that everything will be erased off of his ipod. Is there anyway to add to it with out erasing the hundreds of songs I put on there already or even get the songs on the ipod onto his computer?

    The following documents might be of some assistance with that:
    Using iPod with multiple computers
    Managing content manually on iPod
    Copying music between authorized computers with iTunes for Windows
    Although the last document refers to purchased music, those techniques (with the exception of the reverse sync of purchases) can also be used to transfer songs that you've ripped from CDs from one PC to the other.

  • I use 2 iphones with different numbers and different contacts.

    These iphones (a 4 and a 4S) are used as local phones for 2 different countries. As a result I end up adding contacts into the iphone that I am using at any given time. However, the contacts are common and may be required from the other iphone as well. THe iphones have different names and are backed up separately. How can I ensure that if a contact is added to one is also automatically updated to the other? If not automatic, how do I sync them to a common contact list which keeps accreting contacts from both?

    syncing contacts, with either iCloud or iTunes, mean all contacts or nothing. You can set up iCloud, that means adding a contact to one iPhone it will automatically appear on the other one, but all the other contacts will be on both phones, including the ones you might not want there, if you insist on keeping part of your contacts seperate.
    If you don't mind having all contacts on both phones, do the following on both devices:
    Go to Settings - iCloud - login with your Apple ID - turn on Contacts.
    Hope this helps
    Stijn

  • Eventing between iView on different pages and different models

    Hi guys,
    Though I read carefully as many related posts as possible,
    I haven’t been able to determine a definite answer to the following question.
    I am creating an ‘application’ that will show several graphs about a month n in the portal.  Each graph is an iView in a different page, and I want the iViews to be completely independent.  I mean, I can’t go for the option of having all the iViews in the same model.
    Therefore, I have to design each iView with an event in,
    They would receive as parameter, the month n issued as event out of a first iView.
    I have not been able to have those iView communicating with each others up to now.
    I saw that maybe Guided Procedure would be an alternative, but fear that I then have to pass in the graphs in the exact same following order each time, which I want to avoid.
    Any pointer is welcome.
    Ch

    Thanks for your trial, Jan.
    Using one single model is not an option (and I know how to do it should I decide to go that way).
    Think about authorizations, for instance : user1 can see graph a b c and user2 can see graph a d e. 
    If the graphs are all in a big iView, I can't segregate graphs b c d e that are not common to the two users.  If each graph is in a different iView/page, I can assign them one by one.
    Another application of the concept : if I have a 'summary' page and a 'detailed' page, showing the same graph but at a different size, for instance : going for the 'indenpendancy' solution allows me to re-use exactly the same iView, just the layout properties would be changed at 'portal' level.
    Ch

  • Partition Restore Cold Backup Different System and Different Version DB

    Is it possible, can we restore the cold backup at different database version and different operating system(but same ENDIAN_FORMAT) ????????
    My original system HP-UX (64-bit) and database version 10.2.0.3.0 i have cold backup and i want to partion restore on Linux Redhot 5.5 (64-bit), database version 10.1.0.4.0 .
    If it is possible. How can i do this.

    My original system HP-UX (64-bit) and database version 10.2.0.3.0 i have cold backup and i want to partion restore on Linux Redhot 5.5 (64-bit), database version 10.1.0.4.0 .1. AFAIK you can not do it i mean wiht cold backup move from HP to linux
    2. You can try to use exp-imp if you want to change db version.
    See below notes:
    Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
    Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
    Regard
    Helios

  • How can i synchronize different contacts and different calendars with different iOS devices using the same Apple ID and iTune ID?

    I have the following situation. 1 Apple ID. 1 iTune account. I have 2 ipads and 2 iPhones
    1- I would like to have a set of 1 ipad and 1 iphone (mine) sharing the same contacts and calendar entries (synching from outlook)
    2- I would like to have another set of 1 ipad and 1 iphone (my wife's) sharing contacts and calendar entries but obviously these would be a different set of contacts and calendar entries than mine
    How can I set up my four devices to do this?
    Thanks for your help
    Cheers

    Have your wife log in to her user account on the laptop. Launch iTunes, then connect her phone to the computer with the USB cable. Sync. That should put back all apps and media. Since you already upgraded her to iOS 5 she'll have to manually enter all her settings and preferences, and organize her home screens.

  • How do you share library's with different accounts and different users

    My family has lots of music and to save hours of time we want to share our music, is this possible? The only problem is, we each have different Apple ID's and our own computers.

    Each device will ONLY sync what you select.
    Just do not select the apps that you do not want.  Only select the apps that you do want.

  • Using different datasources and different view objects.. (ADF 11g)

    In our application we have the need for using two different datasource (an old version and a new verision) - but not at the same time.
    Isn't it possible to base a viewobject on top of two sub viewobjects and run time decide which sub viewobject to use?
    If possible - could someone please show some code examples?
    Thanks...

    Hi,
    no, not exactly. You can have polymorphic views, but the use case is a different. The transaction is maintained by the AM, so if you want to connect to different data sources then you have to connect to them when starting the application, For this you can configure it for dynamic JDBC connect
    Frank

  • Moving transport to different systems and different mandants

    Hi all,
    I'm new to sap transport managment, so I hope this is not too obvious question.
    I've this kind of hypothetical situation. I have one develoopment system and 2 quality. On development system I have mandants 100, 200 and 300. On quality 1 I have mandants 100 and 200, and on quality 2 only 100.
    DEV: 100, 200, 300
    QL1: 100, 200
    QL2: 100
    Transport routes should go like this
    DEV 100 -> QL1 100
    DEV 200 -> QL1 200
    DEV 300 -> QL2 100
    What is important is that I would like to have it all within one transport layer. How it can be done? Is it connected with Standard Transport Layer?
    Best regards
    Marcin Cholewczuk

    Hi Mark,
    Thank you for response, I thought that target groups work differently. For example
                                             ------100--------> QL1
    DEV --------------> /CUST target group/  ------200--------> QL1
                                             ------100--------> QL2
    I thought that in such case when someone release transport in DEV system than this transport is being imported (after import operation) to all 3 locations (QL1 100, QL1 200 and QL2 100). So if in DEV system I release something in mandant 100 it will go to all 3 locations, if I release it in mandant 200 it will also go to all 3 locations and so on.
    Second question would be how to enforce that data from DEV 300 goes to QL2 100 (change of mandant).
    Best regards
    Marcin Cholewczuk

Maybe you are looking for