Syncing on't override the device
I'm noticing that I can put things on my 8310, but not take them off. For instance, if I generate an empty address book on my laptop (running leopard) and select override device in the syncing options for the address book, nothing changes on the bb. Also, I put mobipocket on my bb and after realizing that I couldn't sync documents to the bb I used the uninstall option in the SyncManager. The program is still on the bb and seems functional, but I no longer have the ability to uninstall it through the SyncManager. Also, whenever I try the reset commands in SyncManager nothing happens on the bb.
Any suggestions? At this point I'm not sure I want to invest $$ into another piece of software that may or may not work.
Thanks,
Pat
Try resetting it by holding the power and home buttons at the same time until you see the Apple logo, then releasing. You won't lose any data by doing this.
Similar Messages
-
Yesterday I reset my settings on my iphone 4 to correct a problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?
Best practices says plug the USB cable into the computer, then plug the 30 pin connector into the iPhone.
If everything is working correctly, you should be able to plug the iPhone in at any time. Before or after opening iTunes.
Depending on what settings are selected in iTunes, the program may or may not automatically open when you connect the device. -
I used to be able to sync my iphone with itunes, but now when I plug my iphone into my computer it no longer syncs or even shows the device icon. Could this be because I have an old iphone and it's not compatible with the latest version of itunes?
Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
Hi! I have an iPhone 4S with iOS 6.1.3 and I have iTunes 11.1.3.8. on my Windows 8. Now I can't sync my iPhone, because the device is not recognised by iTunes. Somebody have any idea why, or what can I do (except refresh the iPhone software) ?
Hi Drazse,
Thanks for visiting Apple Support Communities.
If your iPhone is not recognized by iTunes for Windows, the troubleshooting steps in this article may help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jeremy -
Hi all,
Would you know whether there is an incompatibility between iPad2 and outlook 2010 calendar? I can sync outlook appointmens down to the device but not up to the computer calendar. The same occurs with my iPhone 4, can sync appointments down to the device, but not back up to the computer. Any help appreciated!Most computer's USB ports do not have enough power to charge iPads while they are active. An iPad will charge while in sleep mode, but very slowly.
-
My new ipad will not sync with itunes. the device does not show up in itunes
my new ipad will not sync with itunes. the device does not show up in itunes. I am on a Windows system
Do you have the absolute latest version of iTunes downloaded? If your iTunes software has not been updated in some time, your iPad will not be recognized. With iTunes open, click on Store at the top. Check for available downloads and if there are any, download them. Once you've verified you have the latest software, connect your device again, and it should be recognized.
-
I have had several computers in recent years and when i try to sync my iphone and ipad to my new computer, it says it cant because the devices are registered on too many computers. I only need them synced up to two computers - how do i fix this?
In iTunes, under the "Store" menu, you can select "Deauthorize this computer". That will remove that computer from your iTunes account and free up a spot for the new computer.
If you have already sold or wiped your previous computers, you can log into your iTunes account from the Store menu in iTunes by selecting "View My Account xxxx@xxxx". Once you are logged in, about 1/4 the way down the page it will tell you that you have "xx computers are authorized......". Beside that you have the option to deauthorize all of the connected devices. That is the only option, you will have to deauthorize all and then set up the ones you want to use.
I think 10 is the maximum number of devices that can sync to one iTunes account. -
Each device (pc + android phone) is logged into Sync, but there is no sync sharing happening
<sub>edit: removed personal information for your protection. (philipp)</sub>HI msknack,
Thank you for your question. I understand that both of the devices are not syncing to match. Can you please check the following:
*Are they on the same version of sync? (Android account should not list Firefox Sync (deprecated))
*Are the managed items checked to be synced in the sync options?
Posting back could help out other users as well. -
I created a Sync account before but uninstalled it without saving the code. But now installed it again and having trouble finding my account code to setup my Sync. Is there a way to retrieve my Sync code without creating another account?
Thanks!Contact iTunes:
Apple - Support - iTunes - Contact Us -
Movie videos are not syncing properly from iTunes to the ipad
Yes, I have checked off each of the 4 movies and did not click on the "manually manage videos & photos". At one point I even scratch the entire ipad and started it as "new", and added everything back on ....... they did display at first (the 4 movies), but the next time I synced, it went back to the over movies and the 4 movies disappeared .......
-
My ipod will never finish syncing it always says the device timed out
the ipod gets to the last phase then stops responding its 4g ipod touch
The device only times out if itunes stops responding
-
Phone: IPhone 6
Version: 8.3
Carrier: verizon
Model: MG5Y2LL/A
I need help in figuring out why the phone will not appear as a device on any Mac computer.
Is it because of the fire vault? Recently I have been having issues with the fire vault.
Should i re-istall itunes?
Please help.See this support document for some assistance. If you don't see your connected device in iTunes for Mac - Apple Support
-
Recently upgraded to I cloud. Have I Mac, I pad 2 and I phone. Calendar is not updating from I phone to other devices. Any help on what I can do to correct this?
dd3858,
Check iCloud: Troubleshooting iCloud Calendar for a possible solution to your problem. -
Please help me out. My iTunes does not recognize my iPod classic as a device and I don't know how to add it. Since it does not appear in my list of preferences I am unable to sync my tunes to the device.
Hello Kathryn165,
The following article would be a good starting point for diagnosing and sorting the source of the trouble with iTunes and your iPod.
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
Cheers,
Allen -
i have recently purchased an ipod touch 5th generation ipod for my girlfriends daughters! im trying to sync some music onto the device but it is not been recognized on itunes. i have the device plugged in but i cant find the device on itunes! I have plugged my phone in to check if its the cable but the cable is fine as my iphone synced up perfectly! wondering if anyone could help me out??
Hello there, dtumman.
It seems that for the issue you are describing you were referred to us from the very article that provides the troubleshooting steps to help resolve your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Keep in mind:
Follow these steps, testing to see if the issue is resolved after each section.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Maybe you are looking for
-
Data not seen in Table Control --Print Preview
Hi I am creating one Standard Transaction Iview for CATS . While doing print preview(Portal Side) in IE 6 , I am not able to see data in Table control(Data Entry Area ). Can you please provide me the solution for how I can see the data in Table Cont
-
JDBC BUG WITH SYNONYM TABLES AND DB-LINK
I have created a database link within my schema. Then i have created a synonym for a table in the linked database. When using metadata.getColumns() for the synonym table there are no columns returned. When using metadata.getTables() the synonym table
-
Hi all, I process a sales order with 3 item. In the flow we have sales order and billing (third part scenario) My problem is when I'm going to process billing document, I didn't see the total item insert in the sales order but only the first. What ca
-
[OIM] Cannot use special character in User Group Name
Dear IdM expert, I have problem creating user group in OIM if user group name contain special character like '&', '<' or '+'. I read Note 430081.1 : Can a Field Label in an Object Form Contain Special Characters? and change <AppFirewall><SecurityLeve
-
Hi, Does it possible to display the Customer Material number and invoice date also in the reference object screen of the notification while complaint registration. if it require any kind of enhancement please help me on the logic to fix this requir