Syncing Palm E2 - Windows 7 - 64 bit

I am having trouble syncing my Palm E2 with my new Dell laptop with Windows 7 (64 bit). I have installed all the software from the installation disk that came with the Palm and upgraded to the highest version 7.02.01 available for W7 on Palm's site, but sync still does not work. Is there a driver or patch I can download to allow me to use my Palm on my laptop?
Post relates to: Tungsten E2

Please read the thread at the top of this section entitled, "64bit Palm Desktop drivers are here".
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

IPhone 3GS SYnc problems with Windows 7 64 Bit

I am having sync problems with windows 7 64 Bit.
The iPhone syncs a few tracks then hangs, a few minutes later itunes tells me the iphone has timed out.
Anyone have any ideas about this. I have tried different USB ports, cleaned the apple USB cable contacts with Servisol, restored the iPhone and reinstalled itunes.
iPhone and iTunes are latest versions.
Thanks
Joe

"Try this connect the iPhone, let the mtp driver installation fail, then go into the device manager and uninstall the unknown mtp device. If you then scan for new hardware from the device manager it should recognize the iPhone & update the driver."
Ok here's what I did:
1) Connect the iPhone (iTunes had been installed)
2) No MTP driver installation is happening as Windows detects iPhone successfully
3) Open Device Manager
4) There seems to be 2 drivers for iPhone that are active now, although I still can't see which one is the MPT driver you're referring to.
One of them sits under Portable Devices: "Apple iPhone". If I view the details of this driver, it lists the following files:
- C:\Windows\system32\DRIVERS\UMDF\WpdMtpDr.dll
- C:\Windows\system32\DRIVERS\winusb.sys
- C:\Windows\system32\DRIVERS\WUDFRd.sys
- C:\Windows\system32\WpdMtp.dll
- C:\Windows\system32\WpdMtpUS.dll
The other one sits under Universal Serial Bus controllers: "Apple Mobile Device USB Driver". And as indicated by Joe above, it lists the following files when I view the Details:
- C:\Windows\system32\Drivers\usbaapl64.sys
- C:\Windows\system32\usbaaplrc.dll

Download and sync m515 to windows 7 (64 bit)

My computer died and I was able to save my palm data on the handheld and I do not have a Palm OS disc anymore. I have a new Windows 7 64 bit computer but I need to both download Palm software and sync to my new system.
I am also nervous, not being a techie, that I may lose my data in the process, something that happened once before in a "regular" hotsync. I have connected before with a USB cradle.
Clear and not too technical help would be a lifesaver. Thanks

You can find Windows Mobile Device Center here
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
Microsoft has identified some users who are having driver related issues when trying to sync this is generally resolved by reinstalling windows mobile device center again.
It is important that you install WMDC before connecting your device to your PC. However if you have already connected your device and received the Driver failed to install error message, you can resolve the issue by removing the devices generic RNDIS driver entry from Device Manager.
Disconnect your device for your PC
From the start Menu open the control panel
Select “Hardware and Sound” then “Device Manager”
Now connect your device to you PC so that the associated driver shows up under “Network adapter”
Right click on the driver and select Uninstall
At this point disconnect your device, install WMDC if you haven’t already done so and the reconnect your device. WMDC should recognize the device and complete the driver install.

Booksmark not syncing - Iphone 4, Windows 7 64 bit OS.

I'm having a problem with synching my IPhone 4 to my Windows 7 64 bit OS. I've found the following failure log from the sync log. anyone know how to resolve this? I've removed the reported offending folder, but can't get anywhere else.
com.apple.Outlook.client.exe ends
===================================
[7496 @ Tue Mar 29 11:31:39 2011] [YSLog com.apple.IE.client.exe] defaults key ShouldLog in domain com.apple.IE.client.exe is (null)
[7496 @ Tue Mar 29 11:31:39 2011] [com.apple.console com.apple.IE.client.exe] name of links directory: Links
[7496 @ Tue Mar 29 11:31:40 2011] [_ISDVLog com.apple.IE.client.exe] com.apple.IE: refresh sync com.apple.bookmarks.Bookmark, com.apple.bookmarks.Folder
[7496 @ Tue Mar 29 11:31:40 2011] [_ISDVLog com.apple.IE.client.exe] com.apple.IE: prepare to refresh com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder
[6672 @ Tue Mar 29 11:31:40 2011] [_ISDVLog AppleMobileSync.exe] com.apple.MobileSync.a7bfb8b29b8b54e2f6c1164e595e62ce49393064: fast sync com.apple.bookmarks.Bookmark, com.apple.bookmarks.Folder
[7496 @ Tue Mar 29 11:31:40 2011] [_ISDVLog com.apple.IE.client.exe] SyncServices precondition failure in [ISyncConcreteSession pushChangesFromRecord:withIdentifier:]: you can't change the record's entity name from com.apple.calendars.CalDAVAccount to com.apple.bookmarks.Folder in {
"com.apple.syncservices.RecordEntityName" = "com.apple.bookmarks.Folder";
name = "Internal Links";
position = 1;
[7496 @ Tue Mar 29 11:31:40 2011] [YSLog com.apple.IE.client.exe] objcMain caught an exception:
name : ISyncInvalidArgumentsException
reason : [ISyncConcreteSession pushChangesFromRecord:withIdentifier:]: you can't change the record's entity name from com.apple.calendars.CalDAVAccount to com.apple.bookmarks.Folder in {
"com.apple.syncservices.RecordEntityName" = "com.apple.bookmarks.Folder";
name = "Internal Links";
position = 1;
user info : (null)
call stack : (
[7496 @ Tue Mar 29 11:31:40 2011] [YSLoader com.apple.IE.client.exe]
==============================
com.apple.IE.client.exe ends
==============================

dylan1981 wrote:
The EXACT same thing is happening to me. My phone is brand new, so the fact that I can't activate it due to this problem is really frustrating. I've uninstalled and reinstalled iTunes several times, followed apple's instructions in its problem solvers guide...nothing seems to work. I've messed around with the drivers a bit too, with no luck. Anyone have any ideas?
Go to the Event Viewer (Control Panel || Administrative Tools || Event Viewer) and look under Windows Logs || Application. Do you see any Bonjour errors? Since Windows 7 recognizes the camera part of the iPhone (nicely done Win7 integration!) Microsoft is probably not the culprit here.
Uninstall/reinstall iTunes is part of the process, but you also have to make sure you uninstall all the other components Apple installs (Apple Mobile Device Support, Bonjour for Windows, QuickTime), do a reboot, and then install everything from scratch. That may fix the problem.
This is exactly what an Apple guy talked me through over the phone. (I think I even uninstalled Apple Software Updater) I had a similar problem with the iPad on Win7 x64 - it was Bonjour that is the culprit. The x64 flavor of Bonjour for Windows is not as stable as the 32-bit version.
But everything has been golden for me since the reinstall...
Give that a try.
Then if not, you could start looking to see if there is another ZeroConf/SSDP provider that is conflicting with Apple's somehow.
SS

IPhone sync problems with Windows 7 64 bit

I am using Windows 7 64 bit and Outlook 2010. I am trying to sync my iPhone 4 with my Outlook calendar and contacs but am not able to do so. I have checked that I want to sync under the info tab in iTunes and I have the latest iTunes and the latest ios for the phone. Can someone tell me what I can do to get my contacts and calendar to sync with Outlook 2010?

"Try this connect the iPhone, let the mtp driver installation fail, then go into the device manager and uninstall the unknown mtp device. If you then scan for new hardware from the device manager it should recognize the iPhone & update the driver."
Ok here's what I did:
1) Connect the iPhone (iTunes had been installed)
2) No MTP driver installation is happening as Windows detects iPhone successfully
3) Open Device Manager
4) There seems to be 2 drivers for iPhone that are active now, although I still can't see which one is the MPT driver you're referring to.
One of them sits under Portable Devices: "Apple iPhone". If I view the details of this driver, it lists the following files:
- C:\Windows\system32\DRIVERS\UMDF\WpdMtpDr.dll
- C:\Windows\system32\DRIVERS\winusb.sys
- C:\Windows\system32\DRIVERS\WUDFRd.sys
- C:\Windows\system32\WpdMtp.dll
- C:\Windows\system32\WpdMtpUS.dll
The other one sits under Universal Serial Bus controllers: "Apple Mobile Device USB Driver". And as indicated by Joe above, it lists the following files when I view the Details:
- C:\Windows\system32\Drivers\usbaapl64.sys
- C:\Windows\system32\usbaaplrc.dll

Sync Problem With Windows 7 64 Bit

just purchased an iphone 4 and it won't sync properly with iTunes. When I first connected it, it stated that it could not read the contents and said I had to restore the iphone to factory settings. I did this and it still throws up the same message. It does appear as a device in iTunes with the name of the phone but only allows me to have the restore option. I have also unistalled and reinstalled iTunes with the 64 bit version of the program as I am running Windows 7 64 bit addition. Any help is welcome.

Hey all,
are you running your computer in Admin mode? Meaning can you do all the things an admin can do when logged in as you on your computeR? I have Win 7 64bit and have had not one problem syncing my Iphone 4. TRy a differetn usb spot as well. And when you first plugged in your iphone did your OS install the driver for it? That might have something to do with it as well! try running itunes in admin mode or compatibility mode Win XP. Its not the phone but something in your systems isn't reading the phone as it should. just my 2 cents.

Can't sync photos using Windows 7, 64 bit

I just got the iPad. Am using a PC with Windows 7, 64 bit. When I try to sync selected photo folders, sync begins, but never ends. I have to manually stop the sync, and none of the photos are copied. If I try to sync the iPad without photos, it works.

ronsir wrote:
There are only 4 photos in the file and they are quite small. How long should the sync take? I quit after about 5 minutes. Does it take longer?
I sync'ed about 400 the first time and they took about 5 minutes. Yours should be pretty fast. I watched the status bar at the top count through the photos as they optimized...
Try 4 different photos. Maybe one of the photos can't be optimized. (or whatever is done to them)

Setting up Bluetooth HotSync - Palm Centro, Windows 7, 64 bit

A couple of days ago I posted on here trying to figure out how to HotSync my Palm Centro with my new computer that has Windows 7 (64 bit). I followed the instructions - had to go and buy a Bluetooth Adapter for the computer - and went through the instructions from the sticky that was pointed out to me in my original question. I'm to the point where I'm trying to set up the phone to do a Bluetooth HotSync but when it's searching for computers it doesn't find any...
HELP!!!!! What do I need to do now. It may take me a couple of days to get back if anyone answers this quickly because I have a very hectic weekend but any and all advice is appreciated. Thanks.

Thanks for sharing your solution andygc!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Does Microsoft Sync work with Windows 7 64 bit Outlook 2010 when you connect via Bluetooth?

I was using Microsoft Sync and connecting to my laptop using the sync cable when I was running a 32 bit OS and Windows Vista. I just got my new laptop and it has Outlook 2010 running on Windows 7 64 bit. I've read it'll still work using bluetooth to connect vs the ync cable. Has anyone been successful doing it that way? I have a 700W treo.
Thanks,
Bob

Nope. The printer now appears in the list, but I can't print to it. The port is shown as:

Synchronizing Palm Centro Windows 7 (64 bit)

I was dismayed to discover, when I had to purchase a new PC, which came with Windows 7 (64 bit), that my Centro (Verizon) could not HotSync via the USB cable. I did find the following instructions to HotSync with Bluetooth (with which I am not familiar).
http://kb.palm.com/wps/portal/kb/common/article/49229_en.html
I purchased a Targus Bluetooth 2.0 Adapter (ACB10US) at our local Staples, then phoned Targus to verify that it i
s compatible with Windows 7 (64 bit). I was advised that it is - to follow the installation directions (for Vista) in the package and, if it did not install successfully to download an update from the Broadcom website - but, this was not necessary.
Once I installed the Bluetooth Adapter and it appeared on my PC as a device, I followed the directions on the page above, but my Centro did not find my PC.
I phoned Palm Support and a rep guided me through configuring the Bluetooth settings and settings in HotSync Manager to change for first time synchronization. My Centro "found" my PC and I was able to successfully HotSync! It took a while (about 25 minutes) as I have a lot of third party programs on the Centro. There was only one minor error (SysZLib.prc already exists), but everything else appears to be just fine, including adding files to third party desktop programs (E-Wallet, ThoughtManager, etc.). Everything seems fine.
I hope this will be helpful to others with a Palm Centro and Windows 7 (64 bit).
Post relates to: Centro (Verizon)

Thank you for this information I also just created an post located here: http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=53678
I do apologize this was not out there earlier so you could make use of it

Successful Hotsync - Palm T3 Windows 7 64-bit by Bluetooth

After a lot of frustration and some blue screens trying other methods, it worked for me...
HP p6675uk - 2 x dual core - Windows 7 64-bit
Downloaded Palm Desktop 6.2 and installed it, but skipped the hotsync.
Installed a Buetooth dongle - I used a dirt cheap one - the Dynamode BT-USB-M2
It did not install properly, but I ran the Troubleshooter and Windows found the updated driver (CSR is the maker)
Then the dongle kept dropping out - a yellow exclamation mark on the icon in the Devices and Printers window.
Then I ran services.msc (Start - Run - type in "services.msc" - OK) to discover that the bluetooth service wasn't running! Enabled it in automatic mode.
Opened Bluetooth properties and made the dongle discoverable.
On the Palm, started Bluetooth and made a new trusted connection to the PC.
On the Palm set Hotsync to use the newly created Bluetooth conection
On the PC opened HotSync Settings → Connections to use Bluetooth only
Start Hotsync from the Palm.
That worked!
Tried again, got the “can't connect being used by another program" error message on the Palm.
Looked in Devices and Printers, the yellow exclamtion mark was back. Experimented and found an answer that works reliably for me.
Now I have a routine:
After Windows start-up, when I want to run Hotsync, open Devices and Printers. Bluetooth has the exclamation mark.
* Open the Device Manager. Open the Bluetooth device. In the Driver tab, disable the driver, click OK. Go back in, enable the driver, click OK. Look again at the Devices and Printers window:
1. Exclamation mark gone. Switch on Palm, Palm appears in Devices screen, run Hotsync. Goto End
2. Exclamation mark there. Remove dongle, replace dongle
2a. Exclamation mark gone, goto 1
2b. Exclamation mark returns, goto * above
End - It worked, I'm happy.
Post relates to: Tungsten T3

Thanks for sharing your solution andygc!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Palm Pixi Sprint sync with Outlook-Windows 7 64 bit

I have a new Palm Pixi (use to have a Palm 850 which sync Outlook great.
Is there any App that work synchronizing Outlook, I haven't found anything. Help!!!

There are some third party solutions. Here are a few of the main ones. They are available in the app catalog.
http://www.palm.com/us/products/software/sync.html

Unknown error -50 while syncing CONTACTS in Windows Vista 64 Bit & iTunes 9

My operating environment: Windows Vista Home Premium 64 Bit; iTunes 9.0.2.25. iPod is Classic 80 GB, setup for a hard rive also. Music sync is fine. iPod plays the music tracks fine.
Problem: Few days back I tried to sync my "contacts" from my Windows Mail. This worked fine. But, I noticed that my Contacts in the Windows Mail had dupicates and not in proper sequence (last name, first name). So, I spent a lot of time in fixing the records in Windows Mail. I then re-synced the revised Contacts with my iPod. The sync process ended quickly normally, but, nothing changed in the iPod - still showing old records. I tried this sync process couple of times, but no chnage!
Next, I went to Windows Explorer and opened the Computer, and RT-clicked on the iPod icon and opened the properties and deleted the file shown on the hard drive/iPod. and then resynced again. Now I got an error message: "The ipod "--------" cannot be synced. An unlnown error occurred (-50).
Can some one please tell me: 1) how to sync the contacts so they show my new, revised contacts? and 2) how to get rid of this -50 error?
Thank you.

Hi,
I unfortunately have no solution but same error is occuring on mine as well. Also Vista. It happened first 2 days ago after having sync my ipod to latest software 1.1.2 I have then updated to iTunes 9 but no change. Music is seeming to update but the error maintains. If we as user have no idea whom could we contact at apple to get pro help? I mean we are purchasing expensive stuff and we could expect some help. all the best Matt

Wi-Fi Sync not working Windows 7 64 bit iOS 5 Itunes 10.5

The computer where Itunes is installed is hard wired to a switch which is connected to my wireless router. I am unable to sync wirelessly to my Iphone 4. I have iOS 5 installed and am running itunes 10.5. I connected iPhone to computer with the USB cable for initial sync and checked sync this iphone over wi-fi under iphone > summary > options in itunes. I can use the apple remote to control my itunes library so I do know that I am connected on the network, yet Wi-Fi sync will not work. My hardware configuration is as follows Windows 7 Profeesional 64 bit, Cisco Lynksis switch, Netgear WNDR 3700 router, I am running Norton 360 but I had completely removed it and tried syncing but that made no difference. Any help would be appreciated. Thanks in advance.

Update
After trying ever tip posted in these discussion threads (firewall, restarting itunes, resetting phone, disabling and re enabling UPnP on router, etc. etc.) the only thing that worked was uninstalling itunes and then re-installing. At first the phone appeared after unplugging right away but then disappeared after 5 minutes. After restarting itunes it seems to have fixed itself and I couldn't be happier. Anyone having problems with the wireless sync should try uninstalling itunes and then re-installing. It worked for me.

How do I resolve syncing issues between Windows 7 64-Bit and my IPhone 4?

I keep getting an error when trying to sync my iPhone 4 to my new computer.
The error reads as follows:
This iPhone cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.
I cannot tell you how fed up I am with this error and Apple's lack of willingness to resolve the issue without purchasing support.
Does anyone have a fix for this issue to include step by step instructions? Any help would be greatly appreciated, thnak you.

I had the same problem. The following link solved my problem, in particular "Step 5". The regestry entries did the job. I think there is a problem with the iTunes 64-bit installer.
http://randomwindowstips.wordpress.com/2009/12/08/windows-7-itunes-9-software-is -not-installed/
Good luck!

Syncing Palm E2 - Windows 7 - 64 bit

Similar Messages

Maybe you are looking for