Syncing photographs to AppleTV from an External Drive

With iPhoto linked to a library is held on an external drive AppleTV seems to find no photos in Iphoto when trying to sync. I have experimented as follows. Move the library to the iMac drive and everything is OK. I experimented as follows
Exported all my photos as jpg files to a new folder.
Opened iPhoto creating a new library and importing 7 photos
Opened iTunes and successfully synced the 7 photos to the AppleTV
Opened iPhoto and added 3 new photos from jpg folder. iPhoto now recorded 10 photos with 3 in 'last imports'.
Opened iTunes but the photos to sync remained at 7 no matter what I tried. Strangely enough the any new album structure was seen with iTunes but not with the correct number of photos
Anyone have any thoughts on this issue?
Regards
Chris Giles (A very new Apple user)

Thank you for your response.
No the photos were in a folder (as jpgs) located on an external NAS drive. Because things seemed to have little consistency I decided to start clean so to speak. New photos and a new library created within and by iPhoto. New photos imported (7) and then iPhoto used to sync through AppleTV, and this worked OK until I imported some more into iPhoto, only the original 7 appeared for syncing in AppleTV, none of the ones added. Since posting the original question I did some more experimentation. I changed the libraries within iPhoto both those on the iMac drive and those on the external NAS drive. The AppleTV syncing could see all photos and albums on the iMac drive, it continued to see the 7 original photos in the library on the external drive, but not the additions, but it would see any of the photos in the library copy from the iMac drive held on the external drive although unbelievably, all the albums headings did appear.
The criteria I used to select the photos to sync was via the iPhoto option, believing that this way it would use whatever library iPhoto currently was using. I did try to select the library directly from the 'folder' option but all the libraries, including the one on the iMac drive were grayed out and unelectable.

Similar Messages

Ipod sync freezes when trying to sync from an external drive

I just bought a Seagate FreeAgent external hard drive (model # ST305004DA1E1-RK)because I was running out of space on my desktop. I have itunes set up on my desktop hard drive and my library set up on my external and the itunes works fine when listening and/or orgainizing my music, but when I plug in my ipod while the external is pluggged in I get a 'USB Device Not Recognized' warning. But if I unplug the external and re-plug in the ipod, itunes will recognize it. But if I re-plug in the hard drive and try to sync the ipod, it freezes up. I have tried to run the itunes software directly from the external drive, but I get the same 'USB Device Not Recognized' warning when I plug in the ipod while the external is still plugged in. Any thoughts?

As a test, try removing all USB devices except a standard keyboard and mouse, including any USB hub. Connect the hard drive and iPod directly to the computer. See if that works.
If it works, try to figure out which USB device makes it NOT work, treating any USB hub as a device.
If it still does not work, try using the Restore button in iTunes to see of that helps. This will erase the iPod and restore it to original settings.

How do I sync music from an external drive

I recently moved all my iTunes content including music to an external hard drive (multiple reasons: space, SONOS capability, etc.). In addition, I purchased a new iMac. I can wipe the nano, no problem, but how do I get music from the external drive that is not on my computer (but which iTunes will play via iCloud) onto the nano?
Do I need to download everything back to my computer from iCloud and sync that way or is there some toggle I'm missing that allows me to load the external drive --> iTunes--> nano?
Thanks!

Jairy,
You may need to run through the following steps:
Once you've done that, follow the next set of steps to change your iTunes Media folder location to the new drive and then consolidate your library to the new location. This not only copies your audio and media files over, it also retains your ratings and playlists. Note: If you move your music and media to an external hard drive, you will need to have that drive connected to access your files. No matter what, it's always a good idea to have a backup of the media you have in iTunes.
Open iTunes.
From the iTunes menu, choose Preferences.
Click the Advanced button in the Preferences window.
Click the Change button in the iTunes Media folder location pane.
In the Change Media Folder Location window that appears, navigate to the location where you would like your new iTunes Media folder to be created.
Note: By default, your iTunes Media folder is a folder named "iTunes Media" in ~/Music/iTunes/ where the tilde "~" represents your home directory.
Click the New Folder button in the Change Media Folder Location window.
In the New Folder window that appears, enter the name of the new iTunes Media folder.
Click Create.
Click Choose in the Change Media Folder Location window.
Click OK in the Advanced window.
From the File menu, choose Library and then Organize Library if using iTunes 9 or later. If you're using iTunes 7 or iTunes 8 for Mac, choose File > Library and then Consolidate Library.
In the Organize Library (or Consolidate Library) window, select Consolidate files.
Click OK. Important: This action copies all of your music and media files to the new location. There must be enough hard disk space available to copy all of your music and media files.
After the folder has been copied, locate your original iTunes Media folder, and drag it to the Trash. Important: Don't remove the iTunes Library files that may be in the same location as the iTunes Media folder. For more information about the iTunes Library files, see this article.
Quit iTunes and then open iTunes once more.
If you receive the alert "The folder containing "iTunes Library" cannot be found, and is required. Please choose or create a new iTunes library," you most likely moved the iTunes Library files. If this is the case, move them out of the Trash and back to where they were.
If you can open and close iTunes without encountering the above alert, empty the Trash.
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/HT1449
Cheers,
Allen

I am having trouble keeping the quality of my video when exporting to my external drive. I change the kind to "original" but when I view the video from the external drive once exported, the sound and picture are distorted.

I am having trouble keeping the quality of my video when exporting to my external hard drive. I have tried to export from iphoto with changing kind to "original" but when I open the video from the external drive the quality is effected. I have also tried copying the video to my desktop and then dragging and dropping onto the drive...same problem. Any suggestions? I would like to save everything to my external drive so that I can delete all of iphoto library and then reimport to correct a few things.

The file sizes are identical. In the finder I did a search for all .mov files. Then when they came up, I went through them and named each one so that they would be easier to find. I am a new mac user and am used to windows. I realized later that I should not have done this....with a mac files should be named within iphoto app...not finder....When I went to open the videos in iphoto, it wouldn't allow me. I had to go into finder, copy to desktop and reimport into iphoto. Then the videos worked again. However, I had the problem with the poor video quality when copied to external drive before that. Actually the first problem I had was when I copied to ext drive...videos were copying as an image...so I learned that you have to change "kind" to original before exporting....then that problem was solved...now they are videos, not images but not of a great quality. Skips, sound and images are not in sync...etc...

How do I add music from an external drive to iTunes

I have been trying to add music from my collection on the external drive to iTunes, so that I can further add it on my iPod Touch. Trying to do that I lost a lot of songs that I had on my iPod already. The latest versions of iTunes have made it difficult to understand & not so user friendly. Can somone help

Open up itunes and on that home screen simply drag and drop the songs(from the external drive) to the itunes library and the plug in your ipod, go to the music section and check sync all songs from the library, thats all!

HT1473 How do I import my library from an external drive to Itunes quickly

How do I import my library from an external drive to my Itunes on my computer quickly? When I pull up ITunes, I only show Add File to Library and so I would have to manually add each file one by one, isn't there a faster way? In the old Itunes there used to be Import Library?

Press ALT or CTRL+B to display the menu bar. This gives access to File > Add Folder to Library.
If the external drive contains a complete self-contained iTunes library that you want to open, press and hold down shift as you launch iTunes and keep holding until prompted to choose or create a library. Click choose and browse to the iTunes Library.itl file on the external drive.
If you have devices that sync with your previous iTunes library either open the copy on the external as above, or copy the entire iTunes folder into your internal drive and keep the external as a backup.
tt2

Sync macbook pro data only to external drive

How can I sync the data (not only music and movies in iTunes but also documents from Pages, Keynote, Numbers, pdf, photos and etc) to an external USB drive? I only want to sync those data and not backup the whole system. If I delete the data on my macbook, it should also delete from the external drive. Is there any software? Something like DropBox concept. I tried the Time Machine but it seems that it can only do whole system backup.
Appreciate options and opinions. Thank you so much!

Will it work if you were to run Windows as a VM?
I just picked up a nice USB3 250GB pocket drive that is affordable $160.
You can install your programs and use the external device, and it is light and small and gets around 90MB/sec which should be fine using it for programs and data. you could have NTFS and use some of it as HFS+
MyDigitalSSD 256GB PocketVault
http://www.amazon.com/gp/product/B00E3WWFD6/

[Guide] Install and run Windows 7/8 from an external drive without using bootcamp (works for late 2012 iMacs with 3TB drive)

This is a copy of a post from my blog, you can also Read it on my blog...
Introduction
After I received my new iMac with a 3 TB Fusion Drive, I was disappointed when I realized that Bootcamp was not running on this model and prevented me from installing Windows on it. I wanted to take advantage of the powerful iMac hardware to play games but I couldn't.
There are a few ways of working around this limitation, but I found most of them quite complex and most of the time they required formatting the internal hard drive or repartitioning it and go for a brand new installation of Mac OS X. I was not comfortable with that.
But there is another way, and that is to install Windows on an external hard drive, using either USB or Thunderbolt. Personally I used a Lacie Rugged 1 TB drive that has both USB3 and Thunderbolt connectors. Both work very well.
This guide may interest you if:
You have an internal hard drive of more than 2TB and you can't run bootcamp at all (like late 2012 iMacs with a 3TB drive)
You have limited space or you don't want to dedicate disk space on your internal hard disk drive to a Windows installation
What this guide will make you do:
It will make you erase all your data from your external USB3/Thunderbolt hard drive
It will make you install Windows on your external USB3/Thunderbolt hard drive
It will make you install bootcamp drivers
What this will not make you do:
It will not make you modify anything on your internal Mac hard drive
It will not make you use or install the bootcamp assistant
It will not activate the Preference Pane for the default boot drive. You have to boot by pressing the ALT key to manually select your boot drive each tome you want to boot Windows.
What you'll need
An external hard drive with a USB3 and/or Thunderbolt connector. This drive will be formatted so ensure you saved your files before going further. You can use either an SSD drive or a classic hard drive.
A Windows 7 or 8 install DVD or ISO (check whether to install 32 or 64 bits versions based on your Bootcamp drivers) and the corresponding Windows serial number.
One of the following:
Mac OS X with a Windows 7 or 8 Virtual Machine (use VMWare Fusion or Parallels Desktop for example. Note: VMWare Fusion seems to have some issues with Thunderbolt and USB3. Plug your drive to a USB2 enclosure or hub to work around this -it worked for me-, or use another VM software) → Read the important note below
A PC running Windows 7 or 8 → Read the important note below
Windows AIK (free) running on your Virtual Machine or on your PC, or just the imagex.exe file (the rest of the Windows AIK package is not needed)
Download imagex.exe
Download Windows AIK (this download and installation is not required if you have already downloaded imagex.exe)
Bootcamp drivers for your Mac. You can get these either by running bootcamp from your Mac (Applications > Utilities > Bootcamp) or, if like me you have a 3TB drive and can't run bootcamp at all, use the direct download links here.
A USB stick to store your bootcamp drivers
IMPORTANT: If your Mac has a 64 bits processor, your Windows Virtual Machine on OSX, your Windows installation on your PC and your Windows DVD/ISO must also be in 64 bits!
Step by Step guide
Step 1: Get the install.wim file
If you have a Windows ISO file:
Mount the ISO
If you're on OS X: double click on the ISO file
If you're on on Windows 7: Use a software like Virtual Clone Drive (free)
If you're on Windows 8: double click on the ISO file
Open the mounted drive, then go to the "sources" folder and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
If you have a Windows DVD: open the "sources" folder on the DVD and locate the "install.wim" file. Save this file to C:\wim\ on your Windows installation or virtual machine.
IMPORTANT: If instead of a "install.wim" file, you have "install.esd", you can not continue this step by step guide. And an ESD file can not be converted into a WIM file. So you must get a version of the Windows installation DVD/ISO that has an install.wim file.
Step 2: Clean, partition and format your external hard drive
On your Windows installation or virtual machine, plug in your external hard drive (can be plugged using USB2, USB3 or Thunderbolt at this stage)
Open the command prompt in administrator mode (cmd.exe). To run it in administrator mode, right click on cmd.exe > Run as admin.
Type the following and hit enter to open the disk partitioner utility:
diskpartType the following and hit enter to list your drives:
list disk
This will display a list of disks mounted on your computer or virtual machine. Make sure your drive is listed here before you continue.Identify the disk ID of your external hard drive. Replace # by your real external disk ID in the command below:
select disk #Clean all partitions by typing the following (warning: this will erase all data from your external drive!):
clean
Create the boot parition by typing the following followed by the enter key:
create partition primary size=350
This will create a 350MB partition on your external driveFormat the partition in FAT32 by typing the following:
format fs=fat32 quick
Set this partition to active by typing:
active
Assign a letter to mount this partition. We will use letter B in our example. If B is already used on your PC, replace B by any other available letter:
assign letter=b
Windows will detect a new drive and probably display a pop-up. Ignore that.Create the Windows installation partition using all the remaining space available on the external drive by typing the following:
create partition primary
Format the new partition in NTFS:
format fs=ntfs quick
Assign a letter to mount this partition. We will use letter O in our example. If O is already used on your PC, replace O by any other available letter:
assign letter=o
Windows will detect a new drive and probably display a pop-up. Ignore that.Exit the disk partitioner utility by typing:
exit
Step 3: Deploy the Windows installation image
Still using the command prompt in admin mode (you didn't close it, did you? ), locate the imagex.exe file mentioned in the "What you'll need" section and access its folder. In our example, we have put this file in C:\imagex\imagex.exe
Type the following and hit enter (remember to replace o: with the letter you have chosen in the previous step):
imagex.exe /apply C:\wim\install.wim 1 o:
This will take some time. The Windows installation image is being deployed to your external driveOnce done, type the following to create the boot section (remember to replace o: and b: with the letters you've chosen in the previous step):
o:\windows\system32\bcdboot o:\windows /f ALL /s b:
If you get an error message saying that you can't run this program on your PC, then most probably you are running on a 32 bits installation of windows and you're trying to deploy a 64 bits install. This means you did not read the important notes in the beginning of this guide
If you get an error message on the options that can be used with the BCDBOOT command, then it's because you're installing Windows 7, and the /f option is not supported. If that is the case, remove /f ALL from the command and retry.
Step 4: Boot from your external drive and install Windows
Plug in your external drive:
If you've done all the previous steps from a Windows PC, unplug your external drive from your PC and plug it to your Mac, either on a USB3 or a Thunderbolt port.
If you've done all the previous steps from your Mac using a Virtual Machine, ensure the external drive is plugged in to a USB3 or Thunderbolt port. Using USB2 should also work but you'll get very poor performance so I don't recommend doing that.
Reboot your Mac and once the bootup sound is over, immediately press the ALT (option) key and release it only when the boot drives selection screen appears. If you did not get the boot drives selection screen, reboot and try again. The timing to press the ALT (option) key is quite short. It must not be too early or too late.
On the boot selection screen, choose "Windows" using the arrow keys on your keyboard, then press enter.
The Windows installation starts. Follow the on-screen instructions as normal. The installation program will restart your computer one or 2 times. Don't forget to press ALT (option) right after the bootup sound, and boot on Windows again each time to continue the installation.
Step 5: Install bootcamp drivers
Once the Windows installation is complete, plug in the USB stick where you stored the bootcamp drivers (see "what you'll need" section), open it and right click on "setup.exe" and select "Run as admin". Follow the on-screen instructions.If you have an error saying that you can't run this program on this PC, obviously you have installed a 32 bits version of Windows and the bootcamp drivers for your Mac are made for a 64 bits version. You have to restart the whole guide and make sure to get a 64 bits version of Windows this time!
Once the bootcamp drivers are all installed, reboot and press ALT (option) after the bootup sound to boot on Windows again. And Voilà, you have Windows installed on your USB3/Thunderbolt drive running on your Mac.
Now each time you want to boot on Windows, press and hold the ALT (option) key after the startup sound and select "Windows", then press Enter.

Hi i'm trying to follow your guide, I installed windows 8 on bootcamp to do it planning to remove it after the operation is done, but i get stuck at part 3: every command i give to imagex i get a pop-up ftom windws asking how do I want to open this kind of file install.wim and imagex does nothing, what do i have to do to stop those pop-ups?

Steps to put itunes (50 gb) on external drive and delete from imac. How would I update my ipods and ipad from the external drive if I do this

I am planning to put itunes library on external hard drive. My Imac is running out of room and itunes is 50+ gb of music.
What steps do I take to do this. Also, if I do so, how do I update my ipods and my ipad 2. I do back up my files with time machine. This would be a completely separate new external hard drive. Thanks in advance for any help.

Two ways:
1. After transferring to the external drive create an alias to the iTunes Music folder on the external drive. Copy the alias into your Home folder. Rename the alias to "iTunes Music." Delete the alias from the external drive.
2. In the iTunes preferences click on the Advanced icon in the toolbar. You should see a field labeled, "iTunes Media Folder Location." Click on the Change button and select the /iTunes Music/ folder on the external drive.

How do I move an iTunes library from one external drive to another?

I need to move my iTunes library from one external disk to another, because the original disk is about to fail. So, I went into iTunes Perferences --> Advanced, and set the library to a new, empty folder on the new drive.
Nothing changed. I expected all my music to vanish from iTunes, so that I would have to re-import it. However, all the music remained, still on the old disk. At this point, if I were to recreate the library on the new disk, I would have all of my music twice.
Is it possible to move an iTunes library from one external drive to another, or am I stuck with my original choice until I buy a new machine? If I can move it, can one of you clever folks explain how it could be done?

Paul Seymour1 wrote:
However, those are all dealing with old versions of iTunes that still contained the Advanced --> Consolidate Library command which is no longer part of the app. (I'm on iTunes 10.6.1.)
Consolidate is still part of iTunes.
It is in iTunes menu File > Library > Manage library > Consolidate.
The article you linked to is old and it is (and was) a hacky way of doing it.
Just copy the entire /Music/iTunes/ folder to new location, hold Option (Mac) or Shift (Windows) when launching iTunes.

My computer recently crashed. I had everything on an externa drive. I'm trying to reload my music into itunes from my external drive. I do not have an itunes library document for some reason. How do I get my library back onto itunes?

I'm trying to figure out how to access my music library from my external drive. I do not have a media library document and believe that I would have to create one based on the music that is on my external drive. Can someone help?

If you're running Windows 8.1, this seems to be a common theme, or some variation there of at least. Myself, I can't even back-up on my iPhone 4S which has iOS 7.1.2 and I'm running iTunes 11.3.0.54 and have resorted to purchased the iTunes Match service to ensure that music on my primary desktop PC (which is paired to my iPhone) will be available on both the iPhone and my Windows 8.1 laptop. Regarding backing up of the iPhone, I'm thinking about going to a third party solution until either Apple and/or Microsoft can figure out why Windows 8.1 is having so many problems with the current version of iTunes (as of this writing 11.3.0.54).

Can I set up my Macbook Pro to boot to Win 7 from an external drive?

Rather than partition my internal drive for having to work with Windows & Office 2010 (specifically Access 2010) can I set up my macbook pro to boot to Win 7 from an external drive?

No, not with Boot Camp. I've never even tried it with a VM (which I use) - I keep all the data on my internal drive. I'm not saying that it couldn't be done with a VM, I've just never tried it.
Clinton

How do I move a project from an external drive back into Imovie

I recently bought an Iomega external hard drive to store documentary movies so that I wouldn't jam up my Imac's free space. However, after I moved an imovie/idvd project to it, and wanted to make changes, I could not move the project back into the Imac's drive. (It also would not burn from the external, giving me a multiplex error) When I tried to move the movie back into Imovie on the Imac it said Quicktime couldn't parse it. I saw various posts about parsing, but not about specifically about moving a project from an external drive. Can anyone offer any suggestions? It seems to me that I should be able to move a project back and forth without that much trouble.

Sounds like you have a DVD format (MPEG-2) and not an iMovie Project file.
The key phrases are "multiplex" and "parse". Both suggest MPEG-2 format when opened in QuickTime. It would also throw an error -2048 message if MPEG-2.
But another issue could be the file format of the external drive. Most ship pre-formatted for the Windows OS's but a Mac user should format using HFS+ (and others). If you didn't format the drive before moving the large iMovie Project onto it it may have become severely fragmented if the external used FAT 16 or FAT 32 (very common) formats. They have a 2 or 4 GB file size limit, respectively and would have made your Project unreadable when moved back and forth.
Use the Disk Utility app to find out the format of your external drive.

How do I consolidate backed up music from an external drive into itunes?

I had to replace my ipod and am trying to consolidate my old music from an external drive with the itunes library on our home computer. My gf has music there already. I have tried consolidate library, edit/prefereces/change, copied my music in itunes folder BUT nothing works. iTunes just will NOT pick up/recognize my music. Any ideas will be much appreciated. cheers

Consolidate takes what is in the iTunes library (what you see when you open iTunes) & copies it into the iTunes music folder as shown in iTunes prefs - > Advanced.
If you cannot see the songs when you open iTunes, you need to File -> Add folder to library and select the folder with your music.

Can I transfer data from one external drive to another using my MacAir as a platform?

I am trying to transfer about 94 Gigs of data from one external drive (Touro) to another (Seagate) using my Mac Air which only has about 14 Gigs of available space. How best can I accomplish this operation?

Niel - I know that I must be a real dunce on this. I tried opening the additional window on finder and then dragging and dropping from the Touro drive to the other open finder window for the Seagate drive. Again, it bounced back. What is NTFS? And how do I find if either or both of the drives are formatted in that manner?
Again, thanks for you help on this.
JC
PS I just got the info on the Seagate that it is Windows NTFS formatted. What do I do now? Is Paragon something I can download off the Internet? Why, since I formatted the Seagate to run on my Mac Air would there still be a problem? The packaging on the Seagate says it is compatible with Mac OS systems. jc

Syncing photographs to AppleTV from an External Drive

Similar Messages

Maybe you are looking for