Syncing problem using itunes on pc.

When I try to transfer data from PC to iPad Mini using iTunes it gets stuck in between. But when i transfer from iPad Mini to PC it gets easily transferred. Earlier everything was just fine. I think this problem has started since i updated my iPad Mini to ios 7.1 via OTA. Can anyone help?

That's probably my problem! I would consider that a design flaw. Maybe the people at Apple should consider allowing the iPhone (a mobile device) sync with more than one computer. Anyhow, thank you for answering my question, it has cleared up the issue for me.

Similar Messages

  • Audio and video sync problem using itunes player

    When I play a movie using itunes it starts out okay but after a few minutes the audio and the video are no longer in sync. Anyone have a solution for this problem
    Dennis

    I have the same problem.
    Motherboard: Gigabyte GA-MA785GPMT-UD2H
    Chipset:
    North Bridge: AMD 785G
    South Bridge: AMD SB710
    Video: Integrated ATI Radeon HD 4200
    HDMI Audio through the HDMI out port to one of the TV HDMI in port.
    Tried on Windows 7 Pro 32bit and Windows 8.1 Pro 64bit.
    Tried with the integrated ALC889A audio device enabled and disabled (It seems that the video card drives the HDMI audio device, because it still appears in Windows even if I disable the Audio device in BIOS).
    Latest iTunes and drivers installed.
    Apple, any suggestions? I'm not having a great customer experience after buying a pair of HD movies in iTunes.

  • I just got a new macbook pro. How do I get the 900  songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work.

    I just got a new macbook pro. How do I get the 900+  songs that I took off of cds into iTunes on my computer from my iPhone. I had no problems syncing the music I had purchased from iTunes. I have tried to sync it using iTunes match, this did not work. I would like to have access to my full library without going into the user profile of my old computer, which is on my new computers hard drive. I would like to eventually delete the old profile so that I have more space on my hard drive.

    http://support.apple.com/kb/HT4527?viewlocale=en_US&locale=en_US

  • After running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened??

    I was running the newest version of Snow Leopard, and after running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened?
    I really regret that I said "OK" to Software Update message... after Software Update of these updates on 7-26-11:
    Migration Assistant Update for Mac
    Mac OSX 10.6.8 Supplemental Update
    Safari
    iTunes
    Remote Desktop Client Update
    Now I get a message:
    iTunes cannot be opened because of a problem
    Check with developer to make sure iTunes works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX.
    Process:         iTunes [5092]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         ??? (???)
    Build Info:      iTunes-10315501~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [111]
    Date/Time:       2011-07-26 12:08:18.568 -0500
    OS Version:      Mac OS X 10.6.8 (10K540)
    Report Version:  6
    Interval Since Last Report:          504736 sec
    Crashes Since Last Report:           20
    Per-App Crashes Since Last Report:   13
    Anonymous UUID:                      B8B5EE28-970A-4E79-949B-EA2DD6E6DAA2
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: @loader_path/libgnsdk_musicid.1.8.2.dylib
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
    Model: Macmini3,1, BootROM MM31.00AD.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.35f1
    Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: External HDD, 0x1058  (Western Digital Technologies, Inc.), 0x0704, 0x24100000 / 2
    USB Device: Hub, 0x0424  (SMSC), 0x2507, 0x26400000 / 2
    USB Device: iMic USB audio system, 0x077d, 0x07af, 0x26440000 / 4
    USB Device: Hub, 0x0424  (SMSC), 0x2502, 0x26470000 / 3
    USB Device: Deskjet D4300 series, 0x03f0  (Hewlett Packard), 0x1f04, 0x26471000 / 5
    USB Device: GD-0608-U, 0x056a  (WACOM Co., Ltd.), 0x0021, 0x04700000 / 4
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000 / 3
    USB Device: Hub in Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x1003, 0x04300000 / 2
    USB Device: Apple Optical USB Mouse, 0x05ac  (Apple Inc.), 0x0307, 0x04310000 / 6
    USB Device: Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x020b, 0x04330000 / 5
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8216, 0x06110000 / 5
    FireWire Device: unknown_device, Unknown
    FireWire Device: d2 DVDRW FW, LaCie, Up to 400 Mb/sec

    Same thing happened to me and I get the same error message. These are the programs that don't work
    mail
    keynote
    pages
    all Office 2011 programs
    safari

  • Sync problems with itunes and latest IPod nano

    Hello,
    I have the latest IPod touch and later purchase the latest IPod Nano for GF. My problem is I can't sync itunes with Nano, my current itunes library is sync with my IPod touch.
    How can we manage a reciprocity where itunes enables accessibility for Nano to sync with my itunes library has it does recognize my IPod Touch.
    Hope you understand my problem, looking for your kind assistance.
    Thank you,
    Frank   

    There should be no problems connecting and syncing two different iPods with one iTunes library.  In fact there is NO limit to the number of iPads, iPhones, and iPods you can sync to one computer/iTunes library.
    There are several ways to manage multiple devices with one library.  All of them are described in more detail in this Apple support document.
    How to use multiple iPods, iPads, or iPhones with one computer
    B-rock

  • Iphone and appletv sync photos using itunes from a Network Drive; times out

    I have a brand new Imac and a synology network drive. The network drive contains all my photos.
    When I sync my various idevices (appletv, iphone, ipad) using itunes and specify a folder on the network drive. after a few hours or next day, when I plug a device to sync with itunes, i get a msg saying the folder can't be found.
    It appears that the network connection times out.
    How can I stop this from happenning ?

    Hi!
    could it be related to https://discussions.apple.com/message/13376559?searchText=Sync%20Photos%20from%2 0Synol#13376559 ?
    Did you resolve your problem in the mean time?

  • IPod Shuffle 2nd generation syncing problem with iTunes 7.3

    When I updated my iTunes to iTunes 7.3, I had problem syncing my songs with my iPod shuffle 2nd generation. The error read something like "Ipod shuffle attempt to copy to disk "iPod's name" failed. An error occurred (-54)". I reverted back to iTunes 7.2 and the problem does not seem to arise anymore.

    Well seems to me the only way to solve my problem was
    to revert back to iTunes 7.2. I tried iPod reset
    utility. restoring to default, resetting, everything
    I could think of when I used iTunes 7.3 but none of
    them succeeded. When I reverted to iTunes 7.2, it
    worked like a charm again. Of course we would all
    like the latest version of iTunes on our computers
    but this problem has made me stay with iTunes 7.2 for
    the moment. And does anyone feel that iTunes 7.3 is
    so laggy?
    Regardless of earlier comments on 7.2 vs 7.3, I think you've got something else going on with your system, iTunes 7.3 isn't laggy on my meager 2001 Dual-USB iBook G3 500MHz with 640MB running 10.3.9.

  • Problems using Itunes since last update (10.3.1.55)

    Hi
    I am experiencing problems trying to use itunes since it last updated and installed the latest version (10.3.1.55), a version which seems to be be really faulty if you look at the level of discussions it is generating.
    My problems concern my library:
    I used to be able to just click on a song to start it: now it won't. I have to either right click and select play 'x' or attempt the 'controls' button several times before its menu is willing to drop for me to select play
    I used to be able to also move from one song to another also by clicking on it. Now I can't
    I was also listening to a language programme and could not go back or even stop the listening function
    the cover 'flow' (view mode) certainly does not flow any more. It is very judery and seems to have a life of its own!
    Basically most functions perform poorly or not at all...
    I have not attempted to sync with my Ipod as I am not sure whether there is a danger its content might "disappear"!
    Either it is a case of someone out there has a brillant idea how to resolve this or Apple gets its act together and releases a better version pronto!
    Many thanks
    PS: I use Vista home premium 32 bit.

    Due to the number of problems with "upgrading" to this OS level, I suggest you try the very clean and very forceful AutoLoader OS Reload:
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
    Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
    You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Syncing contacts using itunes

    I have tried syncing my contacts and calendar with my Ipod using Itunes but eachtime my Itues freezes and I must force quit. I have followed intructions and tried reinstalling both the latest Ipod and Itunes software.
    Anyone else had this problem?
    Did you work it out?
    HELP

    Many ppl have experienced problems sync/adding contacts/calendar entries to their ipod... me included - I never solved the problem but I found a work around, I downloaded Outpod (http://www.tucows.com/preview/396266) and all my troubles were over. It's a little utility which imports your contact/cal entries to your ipod... works really well although I know you should be able to do it directly through itunes.
    MB67

  • Problem: Using iTunes 6 with multiple user accounts in XP

    I recently installed iTunes 6.0.0.18 as an upgrade in Windows XP Professional. After installing the software and a restart, I attempted to use iTunes with success as the Administrator. However as another user, iTunes when launched will prompt the user with the user license agreement. When the user accepts the agreement, iTunes never opens, however I have noticed that the hard drive where the music files are located is continually accessed. When logging out an "End Task" message pops up stating that Quicktime Helper Files are still being used.
    After the problem arose I attempted twice to completely uninstall iTunes, restart, cleanup the directories, reinstall, and then give all users full control permissions in both the directory structure of iTunes and the registry, with the exact same results.
    Currently I have no fix for this problem, but I suspect that it is an issue with the software (iTunes 6.0.0.18). I have since downgraded back to iTunes 5.0.1.4 and am not having any issues.

    Hello B,
    So I finally had time to download the latest version of iTunes (ver. 6.0.1.3) and install it (logged on as the Administrator account). Please note that during the install I did get an error message that stated something to the effect that "a program tried to access memory location XXXX which is "READ" only." I believe this to be the new memory lock "virus" deterrent system that Intel has recently introduced with the latest 64-bit processors and motherboards, (which I have) but I am only guessing. In any case the installer finished in the background without incident.
    After installing iTunes I launched it as the Administrator, and everything work just fine. I then logged off and logged in as my user account and attempted to run iTunes. I got the license agreement window, clicked "Accept" and nothing happened, but again I noticed that the Network card and my NAS were being accessed. I launched "services.msc" to check, as you suggested, to see if my QuickTime service had started. Much to my surprise the service was not listed. So I figured, well if there is such a service that needs to be launched then perhaps launching QuickTime would start this service, (still baffled to why the service is not listed in Windows Services). I launched QuickTime, and while leaving QuickTime open I then attempted to launch iTunes. Much to my surprise it started! I then closed both apps and have attempted to start iTunes several times since with success. A crazy fluke but, the steps listed above seemed to work for me. I can only hope that it helps others out who may be experiencing the same issue.
    So it seems that my issue has been resolved. Thank you for all your time and efforts on this matter, I do appreciate it.
    Jamie

  • Syncing problem with itunes after restoring to a new PC from iPod

    My old PC crashed and I copied my iTunes libray to a new PC from my iPod. The libray includes several songs taken from CD's I purchased plus several songs that I had purchased from iTunes. I also "authorized" the new PC. However, when I sync now none of the purchased songs from my new iTunes file will copy back to the iPod. It will only sync the songs from my personal CD collection. I get a message that the iPod is not authorized for these songs. Any suggestions for a fix?

    Try deauthorising your PC and authorise it over again, this can sometimes clear a "not authorised" problem: About iTunes Music Store Authorisation and Deauthorisation
    You could also have a look at this article: iPod does not play content purchased from the iTunes Music Store
    If you continue to have problems you can email Customer Services from this page, they may be able to help: iTunes Music Store - Authorization FAQ

  • IPod Error message when Sync'ing using itunes

    Every time I use itunes to sync my music onto my 5th generation iPod it does about... 50 files then i get the error message:
    'attempting to copy to the disk "DARROL'S iPOD" failed because the disk could not be read or written to'
    A few times i've managed to get all the music onto it but mostly I get that error message. I've done a full restore on the iPod twice but it still happens.
    I resorted to using the Winamp plugin to transfer the music and that seems to work a lot better but it doesn't seem to give album art, would like to use iTunes to do it, any help would be good.
      Windows XP Pro  

    See this troubleshooting article.
    Disk cannot be read from or written to error syncing iPod in iTunes.

  • ITunes, sync problem with iTunes 11.1.4

    Hello,
    I've a problem with iTunes 11.1.4. When I want to add music on my iPodTouch 5g 7.0.4, I can't find how to add the music. The button "Synchronize" is always grey.
    If I try to make anything I have a mesage on the banner at the top saying "Waiting for start the synchronization" or "Starting the synchronization" for 1 second.
    Thank you in advance for your help !
    (sorry for my English I'm French)

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: "Not enough free space" alert when trying to sync
    http://support.apple.com/kb/ts1503
     Cheers, Tom

  • IPhone 4 version 5.0 has sync problems with iTunes 10.5 on Mac OsX 10.6.8

    Hi there,
    I have Mac OsX 10.6.8, iTunes 10.5 and iPhone 4 version 5.0; all up to date.
    When I try to sync my phone with iTunes, the sync goes well until the apps start to sync .... then iTunes closes and I get varying error reports.
    I have tried updating everything (Mac, iTunes, iPhone) to no avail.
    I tried restoring the iPhone, that didn't help whatsoever.
    Does anyone have a solution? I am now tempted to downgrade to an earlier version of iTunes (ie: 10.4.3) as some people suggest in different posts.
    Thank you for your time in replying!
    Marmotte

    There is definitely a problem with iTunes 10.5 and iOS 5.0 syncing correctly.  I've seen lots of workarounds on the forums here.  Just search for it and see if you can come up with something that works.

  • Problem using iTunes songs in slideshow

    I am having a problem using a custom playlist from iTunes. I created a playlist in iTunes, pulled down the songs I wanted to include in the slideshow from the list and it worked. I tried to adjust the length of some songs by using the start and stop time on the Get Info Options tab in iTunes. That worked fine and the songs were shorter. Now that I have added a few more slides and want to adjust the length of the songs again iPhoto will not recognize the changes. Even though the start and stop boxes are no longer checked in iTunes, iPhoto still plays the shorter version of the song. I tried removing it from the custom playlist, I removed them from the iTunes playlist but nothing is working to get the song back to its original length. Can anyone offer any advice? I need to get this fixed before Saturday!

    You might try creating a duplicate playlist in iTunes, "Second Try" and copy all the tracks from the first playlist to the second playlist. Now in iPhoto remove the original playlist and add the new playlist. If iPhoto thinks you are adding a different playlist, it may re-read all the tracks properly this time around.
    Patrick

Maybe you are looking for

  • How do I put my ical on my iphone into 24hr clock?

    I recently reset my iphone and lost the 24 hr clock on my ical when creating a new event.  I have the standard 12 clock with no way to differentiate between am and pm. I have gone into settings/general/24-hour time but this has not changed the clock

  • Changing Russian letters to English (tagging? how???)

    I would like to convert the names of my Russian songs to English in iTunes, since when I connect my iPod to my car, the car displays dots on the screen instead of Russian letters. I want to permanently make Russian titles into English ones. How do I

  • ECC Service functionalities

    Hi All, Can someone please provide some input regarding which are the Service functionalities available in ECC 6.0 or even the earlier version. I need this information very urgently. You can please mail me at [email protected] Thanks, Chitra

  • Upgrading Seagate CR 6.0 to CRVS2010 Steps

    Hi All, I am using following APIs to loading the report in Seagate Crystal report 6.0 using VC++ 6.0 ,now we are upgraded to VC++ 6.0 to VS2010 and currently we are upgrading Seagate CR 6.0 to CRVS2010. PEOpenEngine PECloseEngine PEOpenPrintJob PEClo

  • User u2013exit  required for application e.g. Va01 (create sales order)

    If I want to know what I sthe list of user exits used for a particular application in a system. i.e  in this company  how have they modified the Sap standard VA01 standard application  and which user exit they used, how to see that quickly      Simil