Syncing problems with BB 8320 and lotus notes

Hi everybody.
I have recently acquired a brand new 8320 BB.
But when I start the configured syncing for my contacts, I get an error message telling me that the database cannot be found .
The paths indicated "C:\Program Files\lotus\notes\data\names.nsf" does well exist !
It works fine with outlook but no more with Lotus Notes.
Has anyone an idea ?
Thanks in advance
Kris

See this post for some info:
http://supportforums.blackberry.com/t5/BlackBerry-Link/BlackBerry-Link-OSX-new-Photo-app/td-p/308625...

Similar Messages

I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

Online Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Sync Problem with iPod Touch and Apple TV relating to iPhoto

I have recently recovered from a crash and has to restore everything from my time machine.
I have an iPod touch that syncs with my itunes and therefore with my iPhoto.
Same thing with my Apple TV syncing via itunes with my iPhoto.
After the restore. I have this message:" itunes cannot sync photos to the Apple TV because of a problem on your computer. You do not have enough access privileges for this operation.
Previously I got the same message when syncing iPod touch with iPhoto. Then I opened iPhoto package content and remove the iPod Photo cache. that solves my iPod touch sync problem.
How can I sync with Apple TV again?

I believe you need to reset the Sync services data. Assuming your data on the Mac is correct (or correctable), try this:
1. If it is easy enough to do, clean up iCal. There are AppleScripts and other tools on the Internet to do this.
2. Save a copy of you calendar. Just in case. (File, Back up iCal...)
3. Exit iCal.
4. Start iSync.
5. Preferences, Reset Sync History. (If it is greyed out, wait a few minutes.)
6. Quit iSync.
7. Start iTunes and plug in your iPod.
8. Select your iPod and go to the Info tab.
9. Make sure you have the correct Calendars selected. At the bottom, under Advanced, under Replace information on this iPod, select Calendars.
10. Sync.
That should do it.
Normally, the fiddling with iSync should clear things up, so you can try just that, and syncing, but since your have a messed up situation, I'd go through all these steps once.
-fred

Sync problem with OVI / Outlook of the notes with ...

Hello,
I'm desperate and close to open the gaz :-). I used to sync my Outlook notes with all my former phones with PC-suite. Since I have a new N8, I'm forced to use OVI instead of PC-Suite as it doesn' support this model phone. Everything seems to be possible in the set up but the sync doesn't work and always return an error code : 83860026. It even ask to reinstall Outlook which took sometime but never changed anything. As it might be due to other unknown variables, I tried the same Outlook database with other PC with XP or W7, office 2003, 2007 and even 2010 and the sync always fail with the same miserable error code. I'm fairly suprised to see this problem still there since I gave up, years ago, to use OVI because of this. My N97 and 6303 do the same. Can someone bring some good help to resolve this annoying trouble please?
Thanks in advance, Fabrice

Dear Satari,
thanks a lot for the advice but in the meantime I found another post stating that version 7.1.40.6 PC-Suite works great with the N8. I kept it in my archives and I can state that it WORKED GREAT in less than 5mn!
So far your suggestions might resolve the OVI sync problem but I have no more courage to follow it. I was yet using the latest version of OVI and W7 and Office2010.
However, if it would work, I would recommand the OVI software team to find out why one of their software work very fine while the other seem to cause trouble to the entire world. I could not find a single complain about PC-Suite while the support discussion ifs full of OVI reported troubles for the last 2,5 years. What a shame!
Furthermore, it is unacceptable that NOKIA force their client to use OVI with any phone while they know this software is so unstable. I would add that the "gift" is even worst when it comes to the most expensive product of the range. As the general manager of a software company, I have learnt that it is never good to insist with a product when the development team is unable to cope with bugs and troubles. Whatever the cause could be, it is better to restart from scratch and get rid of EVERYTHING and EVERYBODY involved in the mess! Please Mr Nokia new president, act positively and do your homeworks in the interest of your clients and sharholders. Additionnally, if I had not spoken English I would still be on the road side! Thanks in advance to care of us MORE.

Recommend a Sync software for my TX and Lotus Notes 8

I was wondering what the general consensus was about which software I should use to sync my TX with Lotus Notes 8. I have tried Pylon and it really sucks - lots of bugs. I'm wondering if EasySync Pro works any better? Thanks in advance for your help!
Post relates to: Palm TX

It's a Lotus Notes bug. You have to get an update from them. The update is called "Lotus Notes 852 FP2 SHF191 W32 standard".
Technical details: Password Manager uses a window hook to capture/input passwords in windows applications. The presense of a window hook exposes this bug in Lotus Notes. We worked with Lotus during August 2011 to solve the bug in their software.

Sync problem with Palm IIIxe and outlook

I am unable to sync my PalmIIIxe with Outlook 2007 on my PC running MS Vista Home premium 32 bit. The Palm IIIxe is using Palm OS 4.1 with Hotsync 4.0. I have installed palm outlook 2007 conduits.
I do not get any options to either set up or configure conduits from the desktop Hotsync manger 7.0.2. When I first installed Palm Desktop by Access version 6.2.2 it asked if I wanted to sync with Palm desktop or Outlook, I chose outlook…..but it will not sync, although I have been able to load apps.
Any ideas?

Hi there,
I would recommend reviewing the process for syncing Outlook with iTunes. Take a look at the article below for more information.
iOS: Syncing your data with iTunes
http://support.apple.com/kb/HT1386
If you experience issues during that process then you may want to take a look at some of the troubleshooting steps found in the article below.
iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows
http://support.apple.com/kb/HT1692
-Griff W.

Sync problem with iphone 4 and Outlook 2010 Calendar

See several older post (1 year ago) but not replies to similar question. Anyone solve this bugaboo yet?

Hi there,
I would recommend reviewing the process for syncing Outlook with iTunes. Take a look at the article below for more information.
iOS: Syncing your data with iTunes
http://support.apple.com/kb/HT1386
If you experience issues during that process then you may want to take a look at some of the troubleshooting steps found in the article below.
iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows
http://support.apple.com/kb/HT1692
-Griff W.

ITunes 11 sync problems with iPhone 5 and ios 7

I just installed itunes 11 and it iTunes will no longer sync with my iPhone 5. It would say that it was syncing and then the new files would not be transferred. I uninstalled and re-installed. All of my files were present in iTunes. I would try to sync again and now it tells me I need 500 MB of space to complete the sync I am only trying to sync 9 new songs. No way its 500 MB. Besides the bar at the bottom of itunes says I have 3.2 GB of space. Is anyone else having trouble with the new iTunes?

Ok folks .. here is the solution that has finally worked for me. After spending over 45 days on and off the phone with Apple support, this is the work around solution for the ibooks.
Set your IPAD as new and go through that whole set up process. Plug in your device so it can communicate with iTunes. When you load your books from iTunes to the IPAD do not synic the first time. You will have to drag and drop from iTunes the books/music you want loaded. After you manually do this, the synic seems to work fine.
Also things I have found. By dragging and dropping the volume of books I have. It took less time to load on my IPAD then it did trying to synic and waiting over 24 hours to load in IPAD (at which time you can't touch your device). It was during this huge file load that the Ibooks App/iTunes/Cloud and whatever other Apple software all talk, that the books being loaded start to go squirrely and go into limbo.
Here is the problem. When you get the message "waiting for files to copy", itunes and your device are having an issue. So files that iTunes thinks it has copied over, actually go into limbo and sit there greyed out and won't work on your device. When you try to re-synic again, iTunes says "hey! I have already copied these over" and will sit there on "waiting for files to copy".
A way to fix the files that are in limbo, delete your app and re-download it. The files that moved over from iTunes to your device will still be there, however, the files that are in limbo will disappear. This should stop the synic issue ... or it will identify that there are issues with some of your files.
Is this a great fix ... nope!   I pushed and pushed to be allowed to talk with someone from DEV and got stonewalled. I even brought in their Customer Support from Corp Head office and got absolutely no where.
BOTTOM LINE: iTunes and your devices can not handle a huge transfer of files from iTunes to the device and it creates this limbo "waiting for files to be copied". I find this ironic, because I have never had this problem when it comes to my music (transfering from iTunes to my IPOD), however, I haven't synic that device in awhile, guess i am scared it will do the same crap.
I also got Apple to acknowledge that when they test out their new software upgrades and devices that they ONLY test with iTunes Store only products (ie: music/books/apps). Infact, Apple DOES NOT test any outside source materials. I found this rather pathethically sad, since 99.9% of the users of any devices get their music/books from sources OTHER then the Apple Store. This means that a file that USED to work for you (example: a song) and was loaded on your device fine before all these software upgrades in Nov/2013 might not work anymore because of a change they have made in their software.
Last conversation I had with Apple (both Support and Customer Service) was them telling me that DEV was looking into the problem but did not have an ETA on when a fix would happen.
Also keep in mind, I found that even with a 128kg AIR, it doesn't like to hang alot of books.   I found that at around 3k in books, the device starts to freeze up. This contradicts the Apple concept, that the device can hold as many songs/books as you want, until you reach the max room available on the device. I can clearly tell you this statement is infact false. The device does not like to hold that many files and it starts to delay on you (quite noticeable) at 3k.
So, that in a nutshell has been my experience with Apple Support. 45 days later, I have reset my Air 10 times, tried to load all my books (at one time) 9 times, to finally find that the only way to get them in was a drag and drop the alphabetic (one letter at a time) and let it load on the IPAD before I would drag and drop more. The synic problem doesnt happen anymore, I had to eliminate 2 books that itunes just would not send over to the IPAD even though there was nothing wrong with the file. Am I happy?   NOPE ... talk about bait and switch.
Consumers beware ... Apple doesn't necessarily deliver what it says it will.

Sync problem with Outlook 2007 and BDS version 7.1

I upgraded from 6 to 7,1 on Blackberry Desktop Software and now get the following error when trying to USB sync. I use homail account through outlook connector.
"Unable to access local folders. If your Outlook profile uses Hotmail connector, you must create a local data store (PST) and set it as the default delivery location for the profile."
I have had no problems syncing until I upgraded to version 7.1. Is there a fix for this or how do I reinstal version 6.
Thanks in advance

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB32597 A Hotmail connector error appears when attempting to synchronize with Microsoft Outlook using the BlackBerry Desktop Software
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
As an alternative, I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

PROBLEM WITH XML PUBLISHER AND GRAPH NOT DISPLAYING IN ORACLE APPS

Hi
All you XML Gurus here. I have a problem, When i create a report in XML Publisher desktop i can see a graph im putting into the report on preview and works fine. But when i upload the report as a rtf file into Oracle applications i can see everything else the table logo and stuff .. But just not the Graph Itself when run on the concurrant manager....
Problem number 2
Is there a way that i can use XML Desktop and create a line graph with 2 lines rather than 1 plotting
here is my xml for graph i have made with one line
chart:
<Graph>
<Title text="" visible="true" horizontalAlignment="CENTER"/>
<LocalGridData colCount="{count(.//SELF_OTHERS)}" rowCount="1">
<RowLabels><Label></Label></RowLabels>
<ColLabels>
<xsl:for-each select=".//SELF_OTHERS"> <Label><xsl:value-of select="BEHAVIOUR"/></Label>
</xsl:for-each>
</ColLabels>
<DataValues>
<RowData>
<xsl:for-each select=".//SELF_OTHERS"> <Cell><xsl:value-of select="SCORE"/></Cell>
</xsl:for-each> </RowData>
</DataValues>
</LocalGridData>
</Graph>
All help would be much appreciated to my 2 problems....
Thanks
Sha

Hi All
Will post solution tomorrow or Monday on blog. Heres the chart XML for now.
chart:
<Graph graphType="LINE_VERT_ABS"><LegendArea visible="true" />
<LocalGridData colCount="{count(xdoxslt:group(.//SALE, 'YEAR'))}" rowCount="3">
<RowLabels>
<Label>SOFTWARE</Label>
<Label>HARDWARE</Label>
<Label>SERVICES</Label>
</RowLabels>
<ColLabels>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Label>
<xsl:value-of select="current-group()/YEAR" />
</Label>
</xsl:for-each-group>
</ColLabels>
<DataValues>
<RowData>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/SOFTWARE)" />
</Cell>
</xsl:for-each-group>
</RowData>
<RowData>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/HARDWARE)" />
</Cell>
</xsl:for-each-group>
</RowData>
<RowData>
<xsl:for-each-group select=".//SALE" group-by="YEAR" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Cell>
<xsl:value-of select="sum(current-group()/SERVICES)" />
</Cell>
</xsl:for-each-group>
</RowData>
</DataValues>
</LocalGridData>
</Graph>
with the following data
<?xml version="1.0" encoding="UTF-8"?>
<SALES>
     <SALE>
          <YEAR>2006</YEAR>
          <SOFTWARE>1200</SOFTWARE>
          <HARDWARE>850</HARDWARE>
          <SERVICES>2000</SERVICES>
     </SALE>
     <SALE>
          <YEAR>2007</YEAR>
          <SOFTWARE>1000</SOFTWARE>
          <HARDWARE>800</HARDWARE>
          <SERVICES>1100</SERVICES>
     </SALE>
     <SALE>
          <YEAR>2008</YEAR>
          <SOFTWARE>900</SOFTWARE>
          <HARDWARE>1200</HARDWARE>
          <SERVICES>1500</SERVICES>
     </SALE>
</SALES>
The latest Template Builder makes this a cinch!
Regards
Tim
http://blogs.oracle.com/xmlpublisher

Problems with cached previews and File Not Found errors in preview and build

I am having serious issues with Encore CS5.
When I try and build a preview or disk/image I am getting File Not Found errors. I have emptied the media cache in the preferences but my project still seems to be referencing previously cached files or rendered menus. Is there any way to manually delete previous previews or the cache. I know that there are no missing files in my project. Any help would be very much appreciated.
I am running Mac OS 10.6.4 and Encore 5.0

To fix your locales, see http://wiki.archlinux.org/index.php/Configuring_locales -- in specific, you'll need to uncomment the en_US.utf8 locale at least, since that's the one that's specified in your rc.conf

Syncing problems with iphone 3g and dell computer

Whenever I connect my iphone to my computer, it recognizes it as a camera, not as a phone, and it asks me if I want to use microsoft word or another random program to see photos. itunes doesn't recognize it at all. How do I get itunes to recognize it?

A couple of things that might help out.
Open computer management by clicking on start and right clicking on my computer, then choose manage.
When the computer management window opens, expand services and applications on the left.
Click on services and see if Apple Mobile Device is running on the right.
If it is not running, or is not set to automatic, try starting it.
Also if apple mobile devise is not installed or will not start, this article might help out uninstalling and reinstalling itunes.
http://support.apple.com/kb/HT1926?viewlocale=en_US
If the apple mobile device is installed and will just not start, try uninstalling your security software.
Once uninstalled, restart your computer.
Once the computer is restarted, open computer management to see if apple mobile device will start.
Hope this helps.

Sync problem with Outlook 2010 and BBStorm - no times transfer to Outlook

Everything seems to sync find except the calendar. It duplicates appointments on the phone, probably because all appointments it puts on Outlook turn into all day events without times or subjects. I mean, it's good to know I have something on the calendar that day, but it would be better to know what it is and when to show up. I try syncing again and the blank appointment duplicates onto the phone and still no details in Outlook. It says everything worked. What's up?

For the record - The Torch does the same thing.

I am getting sync problems with Exchange Server and local outlook. Error code is 18439. Does anybody have an idea what the problem might be?

I am using Outlook on my Imac, which is linked to the Windows Exchange Server. All off a sudden I keep receiving messages saying that the message Re: xxxx cannot be synchronized with the exchange server. When I delete the message from my local mail box, all is fine, but after a while another one pops up. The error code is 18493. Does anyone have an idea what could be going wrong???
Thanks for your help already now!

Hello Wolfgang,
I get the same error, but I cannot figure it out too. I hope you or I get some responses back! I do not know why there isnt an edit feature in outlook to acknowledge the individual alarm so it does not alarm again!
Fil

Problems with OSX Yosemite and iCal not running workflows to back up documents folder.

I am trying to get my workflow I created to automatically back up to a SD Flash card I have in my Macbook Pro. I have the workflow set up as an event on iCal but all the forums I have seen say to set the alert as "run the script" and I do not have that option. In order for me to run my workflow I manually have to go into automator and run it. Plus many times when I want the program to run, my computer is sleeping/closed. Any Ideas on how to get this process running automatically?
Thanks!

http://www.macworld.com/article/1157339/automate_backup.html is the link I used originally for the workflow.
I just tried what you said in making the workflow into an application and then use it to run as an iCal alarm. The application works great when I manually select it, but iCal still will not open it when it is set to open that specific application at the alarm time.

Syncing problems with BB 8320 and lotus notes

Similar Messages

Maybe you are looking for