Syncing selected playlists set but get more than are checked

Recently changed to syncing selected playlists to make room on iPod as library got too big. Problem is that list of playlists on iPod is different from those that are checked in settings for iPod. More are on iPod than are checked.
I thought it might be because one of my smart playlists uses another as one of the rules but one of the extras is not in any other playlist. Any ideas on what causes this? I opened up 15GB of space on iPod so space is not critical anymore.

I tried the restore button which returned the error "The iPod could not be restored. An unknown error occured (1418)". After googling this I followed these instructions on the apple website: http://docs.info.apple.com/article.html?artnum=304508
Completed all steps from 1-5 and tried to restore it again, the same error message ("1418") appears.
Windows XP Pro

Similar Messages

Setting for getting more than 1000 recent emails?

I currently have an iPad2 and only have the option for seeing 1000 of the most recent emails in my inbox. Is there any other options for increasing this number?

Maybe using http://asktom.oracle.com/pls/apex/f?p=100:11:0::::P11_QUESTION_ID:73830657104020
NOT TESTED!
select a.name,
       b.occ_title,
       c.town
from emp a,
       occupation b,
       country c
where a.emp_code in (select substr(txt,
                                    instr(txt,',',1,level) + 1,
                                    instr(txt,',',1,level + 1) - instr(txt,',',1,level) - 1
                                   ) as token
                        from (select ','||:txt_clob||',' txt
                                from dual
                      connect by level <= length(:txt_clob) - length(replace(:txt_clob,',','')) + 1
                     )

I am trying to sync a playlist to my Nano, but when I click on the Music tab at the top, it will not allow me to select the option Selected Playlist, Artists, etc. I cannot un-check the Entire Music library option and check the Selected Artist - on

I am trying to sync a playlist to my Nano, but when I click on the Music tab at the top,
it will not allow me to select the option Selected Playlist, Artists, etc. I cannot un-check the Entire Music library
option and check the Selected Artist … one.
I have changed the Sync option to Manually sync, but that does not help.
How can I change this to the second option?
Thanks.

There is a checkbox above those two options for how to sync. It says Sync Music; it enables automatic syncing. That box needs to be checked before you can select from the two options for how automatic syncing is performed.
NOTE: If the iPod is current set up to Manually manage music [and videos], checking that Sync Music box replaces its current content with content from your iTunes library, based on how automatic syncing is set up on that screen.
So, if your goal is to add ONE playlist to an iPod that is managed manually, you do not want to do this because iTunes will erase the iPod's current content and replace it with just that ONE selected playlist (and whatever else you select on that Music settings screen).
Instead, if the iPod currently uses the manual setting, you need to add playlists manually to the iPod (not use the automatic syncing setting). Please post back with more details about your situation.

Is there any way to get rid of this stupid feature in iTunes for Windows? You've subscribed to a podcast but have more than five unplayed episodes. iTunes will stop automatically downloading newer episodes.

s there any way to get rid of this stupid feature in iTunes for Windows?
You've subscribed to a podcast but have more than five unplayed episodes. iTunes will stop automatically downloading newer episodes. You may get the following message:
iTunes has stopped updating this podcast because you have not listened to any episodes recently. Would you like to resume updating this podcast?
You can click Yes to continue downloading additional episodes. Or you can just listen to any part of any episode and a new episode will download at the next update.

I believe that feature was added in order to reduce wasted costs to the Podcaster.
Podcasts incur costs - that have to be paid for, by someone. That cost will be the cost of hosting the Podcast on a server somewhere and more crucially (with regard to your point), the cost of the Podcast being downloaded to your computer. Every download costs the Podcaster money (typically, charged by bytes downloaded).
If that Podcaster pays for the whole thing personally, obviously they want to keep down any unnecessary cost to themselves. If the Podcaster is earning money for his or her Podcast (typically from advertising within the programme) then obviously, the advertiser only wants to pay for advertisements heard by listeners. So a download, not heard by the downloader, is waste of the Podcaster's money or no payment from the advertiser.
My own experience is that I only have to resume downloading once per programme. I'm usually several episodes behind on two different Podcasts that I follow, but I do not recall having to repeat the resume Podcast after that first time.

I have imatch but have more than 25000 songs. how do i select witch songs i want on imatch ??

i have imatch but have more than 25000 songs. how do i select witch songs i want on imatch ??

Neil,
Before using Match, you will have to reduce your iTunes library below 25.000.
Be aware that songs purchased from the iTunes Store on the same account are unlimited as far as Match is concerned, and are not counted in the 25,000 limit.

Can I get more than one account on iphone microsoft exchange server

Hi all,
I was trying to get more than one account on iphone microsoft exchange server for mail, but it seems to only accept one. Is this true with everyone else out there. I guess I am one of the few people with more than one email account that uses microsoft exchange. I would love to have the convience of accessing them through iphone mail but it seems that I will be forced to use safari for the other two by typing owa... in the url.
any workaround to the one email account per iphone policy??

Yu can only have one Exchange Server account per device. This is true to iPhone and any Windows mobile device in the market. The work around is to set your other accounts that reside on an Exchange server using IMAP or POP settings as you used to do before the Version 2 update allowed you to sync directly to the Exchange Server. This methode will allow you to add as many accounts as you want or have.

"Sync" is not working correctly. selected playlists even when the "Sync selected playlists" was selected and playlists were checked in the music iTunes library. Do I have a defective iPod touch?

Ever since I bought my ipod touch 4th generation, IOS 4G, 8GB in January 2011, it would not sync selected playlists.
This is even when I have checked 3 things:
1. Under Summary/Options, I've checked "Manually manage music and videos" and "sync only checked songs and video."
2. When I go to the Music tab and attempt to sync, I have already chosen "selected playlists, artists, albums and genres"
3. When I click on "Sync" a window comes up and says "Are you sure you want to sync music? All existing content on the iPod will be removed and replaced with songs and playlists from your iTunes library."
Do I have a defective ipod?
5Red5

   Sync should be an automatic feature that can be triggered manually. Although, I have a two Shuffles, which are obviously not Touches, so they might be different.
   If you have your iPod set to manually manage music, the option to sync only checked songs should not do anything. You have to drag songs manually to the iPod on the sidebar to add music (I've created playlists of only songs I want, then I shift-click the whole thing and drag all of the songs at once to update them, that way I don't have to remember what goes where), and you have to manually select and delete songs from the iPod's 'Music' library on the sidebar to remove them.
   As for syncing the files, on my shuffles, they sync individual songs (for Get Info information changes ONLY) automatically every time I plug them into iTunes, and again if I make any changes to the Get Info stuff while they're plugged in. For example, if I added a song to my iPod playlist, it wouldn't sync it, but if I changed the genre of a song that's already on it, it will automatically sync.
   Good luck.

ITunes not syncing selected playlists, choosing songs from all playlists

I have some smaller iPods that I use on random occasions. When I sync them, I choose the following options:
Sync Music:
Selected Playlists, artists, genres
Music Videos - Not Checked
Automatically fill free space with songs - Checked
I have two playlists from which I wish a selection to be made, which exceeds the size of the iPod (they were designed for larger devices synced with this machine). When I attempt to Sync, I get a message saying that the iPod is too small, and would I like iTunes to automatically choose songs to sync. If I click no, the sync is canceled. If I click yes to have a subset of my two playlists automatically choosen, the ipod will sync, but then iTunes clears all of my selected playlists and starts syncing songs from all playlists.
This seems like a bug in iTunes to me, as it is not performing the requested options. Has anyone else experienced this, or know how to get it fixed? Or to get a bug report sent in to Apple? I have been going all over the place on their support page, and since this isn't an issue with the iPod, but with iTunes, I haven't been able to find a support avenue.

Suggestions here -> iTunes application feedback
iTunes not syncing selected playlists, choosing songs from all playlists
You have it selected to *sync selected playlists* and those playlists are not syncing to the iPod?
however this seems to be very counter-intuitive behavior for iTunes
It can be kind of confusing.
I suggest it's not a bug in that it is acting as it's supposed to.
The option (Fill free space) could be made clearer. Perhaps if they added "with songs at random from the entire library" or somehow added an option to select what the free space will be filled with.)
1) The fact that iTunes it is not obeying the selected options on the screen
Not supposed to do that.
If the playlists all fit and there is free space, what would iTunes use to fill the free space if it only used selected items?
2) iTunes is allowing users construct an unhonorable set of choices out of four options. If "Selected playlists, artists and genres" is not compatible with "Automatically fill free space," then that option should be grayed out.
It is compatible.
If there is free space after your selections are added, what should iTunes use to fill the free space? It shouldn't fill the free space with stuff already on the iPod.

When I upgraded to IOS5, my playlists no longer appear on the iPOD. When I do a Sync, the playlists appear, but will not sync to the iPOD. Any suggestions on how to resolve??

When I upgraded to IOS5, my playlists no longer appear on the iPOD. When I do a Sync, the playlists appear, but will not sync to the iPOD. Any suggestions on how to resolve??

I would understand it if you checked email on your Mac, and then those messages were not available on your iOS devices if you had the advanced account setting "remove copy from server after retrieving message:" set to immediately.
I looked through my iPhone settings and don't even see an option to tell my phone to pull the only copy of a message and delete it from the server.
Possibly there is another setting in Lion (I am running Snow Leopard still) that tells your Mac to only synchronize mail to your iOs devices and is not pulling mail directly from iCloud.
You could try disabling your current iCloud email account in Mac Mail, and adding a new one and just telling Mail it is a standard IMAP account (imap.mail.me.com incoming and smtp.mail.me.com outgoing).
I did that for Leopard to get my email even to work after MobileMe is cancelled and it seems to work fine with my iPhone.
If that doesn't work, you can delete that new email account and re-enable the temporarily disabled iCloud email account from above.
Hope this helps.

I am running a strain gage test and can't get more than 1000 samples

A formor employee left a strain gage VI that I am attempting to reuse but no matter what I do I can,t get more than 1000 samples before needing to restart the loop. In the task timing (of NI-DAQmx) I have set the acquisition mode to N Samples and the clock settings to read 65000 samples at 25 Hz. There is a DAQmx timing(sample clock) VI that resets to finite samples and 1000 per channel when I close it but I have reset it to 65500 continious samples and left it open to no avail. There is a rate input to this sample clock on the front window that I have tried setting to several different rates to no avail. The Vi will run about 15 seconds, collect 1000 samples and then ask to verify the file location to save the data to. Upon verifying the file location the VI will run another 15 sec. loop before stopping for verification again.
If the loop is stopped rather thanhaving the file verified an error is listed:
Error-200278 occurred at DAQmx Read (Analog 1d WFm NChan NSamp).vi:1
The given possible reason given is: attempted to read a sample beyond the final sample acquired.
When I stop attempting to run the VI the block diagram opens with a dark block around file creation block. I need this VI to run for 10 min. collecting samples at about 25/sec. Can someone help me figure out what I am doing wrong?
I have made screen shots of the VI and the error code to assist finding the incorrect programing.
Thank you for your help.
Jim Steinmeyer
Jim Steinmeyer
Design Engineer
Reinke Mfg.
PO 566
Deshler NE 68340
[email protected]
Attachments:
strain test error.doc ‏493 KB

Thank you,
I was just thinking about being able to increse the size of the doc. for better visability. I have tried working with the rate input for the DaQmx for the sample clock and it does change the frequency of sampling, but I still get just the 1000 samples. I have included Jpegs this time. I have tried to exppand the two DAQ assistants that arn't expanded but am unable to, I also am unable to find a "propertys" command to open them up and see what exactly they do. The nested while loop for output also seems strange to me. Maybe I would be better to attempt a new program but being new to the language I thought using an existing program might be best.
Jim
Jim Steinmeyer
Design Engineer
Reinke Mfg.
PO 566
Deshler NE 68340
[email protected]
Attachments:
block diagram.JPG ‏134 KB
DAQmx.JPG ‏129 KB

Run the same procedure many times in parallel but no more than 10 at a time

I have a table filled with individual such criteria and want to run a stored pl/sql procedure to run searches on an external server on each of them. The stored procedure deals with the API and the external server can handle the concurrency.
I want to be able to the multiple searches concurrently (ie. run the stored procedure concurrently) but no more than 10 concurrent searches at a time (There are 20,000 searches to complete).
I'm thinking this should involve AQ whose messages call "run once" event based jobs from the Scheduler (I'm running on 10g) but I am very new to Oracle and hence not sure where to begin.
If somebody could fill in my obvious blanks and give me an approach that will actually achieve my end I would be extremely grateful!
Cheers, Kim.

> I'm hoping that each of my "spawned threads" (Jobs)
will insert all outputs into the same table (I don't
mind them waiting on each other as it is the
searching that is the real bottle neck). Is this
going to be a spanner in the works?
Inserts into the same table is not a problem. The typical problem is spawning multiple copies of the same PL/SQL proc to update the same table. Somehow each PL/SQL proc needs to find itself a unique set of rows to lock and process - without impact its fellow processes. Using ROWNUM ranges for example does not work in this case.
The search implies I/O. This is good and bad.
Good in that the only real way to speed up a ton of I/O (assuming that the ton of I/O is non-negotiable and must happen) is to perform the I/O in parallel. I/O is the slowest operation on a db platform due to I/O latency. And this parallel I/O processing exactly what Oracle does with Parallel Query (PQ).
The bad is that more processes means a bigger resource footprint and one needs to figure out just what the optimal size is.
Oracle PQ has a very simplistic mechanism - it allows you to specify the number of PQs that can be spawned (and if on a a cluster, on how many nodes) per table. It also allows you to specify a PQ process pool ceiling.
But this is fairly primitive as you still need to figure out (in some way) what the optimal PQ sizes are per table.
The bad is that you either need to do something primitive and similar to PQ - which means a manual monitoring and tuning - or you need to try and automate it. Which in itself can be very interesting, but complex to develop and often quite difficult to get right.

Adobe Web Gallery- can't get more than 10 images to show up

I am trying to create a Web Gallery from within Bridge (CS4), but I'm not having any luck getting more than 10 images to show up when I create the Gallery, even though I'm selecting nearly 50 images (all in the same folder) that I'd like to be in the Gallery. Does anyone know if there's a limit to the number of images that can be used in an AWG? I can't seem to find ANY documentation that sheds light on that subject. All I know is that no matter WHAT I do, I can only get Bridge to create a Gallery with TEN images!! Very frustrating. Any help will be greatly appreciated.

Assuming the obvious that in Bridge content panel you have selected all the
files you want in the web galery
First try a purge cache for folder using the menu Tools/purge cache for
folder when having Bridge pointed to the problem folder.
Second try a reset preferences with option key while restarting Bridge.
I wish that were the case - it's only outputing up 10 images...

I dont get more than 2-2.5 Hours out of my MacBook Air (at lowest settings)

I have a serious problem with my MBA. I mainly use it to take notes at University. So my normal usage is: Screen brightness turned to the lowest possible point, WLAN+Bluetooth OFF and Word running.
How many hours do I get? If I'm lucky, 2.5! And I'm not surfing, I dont play any fancy games, I'm just taking notes. Most of the time the screen is completely turned off, because I dont take notes every 2 seconds.
How in the **** did Apple come up with 4.5h of wireless work? If I turn on the WLAN, set the brightness to 40% and surf the Web, I'm lucky if I get 1.5hours out of my battery.
According to iStat my battery life is at 88% with abou 60 cycles. But I'm seriously considdering to take my MBA back to the Apple Store, because it's pretty much useless for me right now with less than 2h of battery life.
Are you guys getting any better results? I googled and I found reviews that said they were able to surf the web for "close to 4 hours" with brightness at 40%. HOW is this possible???!

You should definitely be getting more than 2 hours (or so) with the configuration you're currently using. Curious, what does your battery statistics look like... Give a full charge, start using it in the configuration you normal use it and copy/paste the info (after about 20 minutes of use).
Apple Logo > About This Mac > More Info > Hardware > Power
Model Information:
Serial Number: SMP-ASMB017-3921-665
Manufacturer: SMP
Device name: ASMB017
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0009
Hardware Revision: 0401
Cell Revision: 0100
Charge Information:
Charge remaining (mAh): 1331
Fully charged: No
Charging: No
Full charge capacity (mAh): 4908
Health Information:
Cycle count: 3
Condition: Good
Battery Installed: Yes
Amperage (mA): -919
Voltage (mV): 7409
Be curious to see the Amperage, Voltage, Full Charge capacity.
On a side note, I've seen significant battery improvement on my machine when backlight is set to max versus 20-30%. It's approximately 25-30 minutes of additional run time over a consecutive run time from 100% to 5% battery.
Secondly, AppleCare does NOT cover the battery replacement "for free." There are specific requirements that would qualify a battery for a replacement under the limited one-year warranty and AppleCare but it's not a "gimme."

Spry insert master/detail layout Can't get more than two columns?

Ive been trying to get more than two columns just experimenting with spry data sets and can't with the layout option "insert master/detail layout"
What am I doing wrong?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:spry="http://ns.adobe.com/spry">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/SpryHTMLDataSet.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMasterDetail.css" rel="stylesheet" type="text/css" />
<script type="text/javascript">
var ds1 = new Spry.Data.HTMLDataSet("benefitsdata.html", "bizben", {firstRowAsHeaders: false});
</script>
</head>
<body>
<div align="center">
<div class="MasterDetail">
    <div spry:region="ds1" class="MasterContainer">
      <div class="MasterColumn" spry:repeat="ds1" spry:setrow="ds1" spry:hover="MasterColumnHover" spry:select="MasterColumnSelected">{column0}</div>
    </div>
    <div spry:detailregion="ds1" class="DetailContainer">
      <div class="DetailColumn">{column1}</div>
      <div class="DetailColumn">{column2}</div>
      <div class="DetailColumn">{column3}</div>
    </div>
    <br style="clear:both" />
</div>
</div>
</body>
</html>

Hello,
in addition to Sudarshan's statement about the discontinued support: In my SPRY library I found this "html_dataset_sample". Maybe it could help you. Here the source code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:spry="http://ns.adobe.com/spry">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<script src="SpryAssets/SpryData.js" type="text/javascript"></script>
<script src="SpryAssets/SpryHTMLDataSet.js" type="text/javascript"></script>
<script type="text/javascript">

</script>
</head>
<body>
<div spry:region="ds1">
<table>
<tr align="center" valign="middle">
   <th width="100" spry:sort="column0">Name</th>
    <th width="100" spry:sort="column1">Class</th>
   <th width="100" spry:sort="column2">Length(m)</th>
   <th width="100" spry:sort="column3">Crew Size</th>
   <th width="100" spry:sort="column4">Crew 1</th>
</tr>
<tr align="center" valign="middle" spry:repeat="ds1">
   <td width="100"><p>{column0.1}{column0.2}{column0.3}</td>
     <td width="100">{column1}</td>
   <td width="100">{column2}</td>
   <td width="100">{column3}</td>
   <td width="100">{column4}</td>
</tr>
</table>
</div>
</body>
</html>
Hans-Günter

Cannot Get More Than 3 Wireless Connections

Howdy, I have a Linksys WRT54G v8. I can't get more than three wireless connections established to the router at a time. Is this a known limitation of the Linksys hardware or am I experiencing a novel problem. I've changed frequencies and switched from mixed mode to G only in order to resolve the problem but these have not made a difference. Allowed number of DCHP users is set to 50. Any suggestions?

In theory, your router can support up to 32 wireless users. However, since the 54 Mbps bandwidth is shared, the practical limit is much lower, but should be more than 3.
How many "4th" computers have you tried to connect? What exactly happened when you tried to make the connection? Did you turn off the wireless computer's software firewall before you tried to connect? Is the wireless computer setup to "Obtain an IP address automatically" and "Obtain DNS server address automatically" ? What wireless adapter(s) are in the computers? Please give all details of computers that failed to be "number 4".

Syncing selected playlists set but get more than are checked

Similar Messages

Maybe you are looking for