Syncing starts, then after a minute or two stops...

Apple TV software version 1.1. iTunes 7.6 on a Vista Home Premium PC. Wireless connection to a Linksys WRT54G router. Apple TV shows up in iTunes no problem. Able to view YouTube movies on Apple TV. All seems to be ok, but...
I begin syncing, see progress, usually for a minute or two, then it just stops transferring my media to Apple TV. Tried selective syncing of music/ video/ podcasts, etc. No luck.
Apple TV still showing up in iTunes, so I'm totally lost as to why it simply stops syncing!
Any and all advice much appreciated.
Marc

Don't know if you're on a Mac or Windows computer. If Mac, run Activity Monitor and watch the "Real Memory" usage of Firefox — my guess is that you will find FF hogging tons of RAM. I started Firefox in Safe Mode (holding down the Option key while running FF) so that no extensions or plug-ins were loaded. Even so, FF started up as the #1 hog of RAM in my system and as I used it, it got worse and then started hanging.

Similar Messages

  • My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

    My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

    Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

  • My mac pro suddenly turned off by itself, then after 10 minutes it started to work again with "no battery available" icon and an always-running fan!

    My mac pro suddenly turned off by itself, then after 10 minutes it started to work again with "no battery available" icon and an always-running fan!
    it's bugging me since I don't know if it's recharging or not..

    Mine has just done this too.  Did you find out what it was?

  • Software updater, won't update it starts and then after a minute it gives me a Network diagnostics message, that the server is not responding.

    Hi my Software updater, won't update it starts and then after a minute it gives me a Network diagnostics message, that the server is not responding.

    Please include your Mac model and OSX in your profile, as it will help the community to help you.  Thanks and welcome to Apple Communities.

  • MGP is starting off after one minute inspite of MGP_DELAY parameter

    Hello
    We have a strange problem. MGP starts and finishes fine...but it starts again after one minute which is the default value(60 seconds).
    We are using MGP_DELAY parameter in webtogo.ora with a value of 800 seconds..its still starts after one minute only...
    We are starting MGP from the mobile server and not as service..
    We restarted mobile server also..
    Can anybody help us with this strange behavior..
    Am I missing anything..
    Any help is greatly appreciated..
    thanks
    Yugandhar
    [email protected]

    Hi
    thanks for the info...looks like MGP_DELAY parameter works only when MGP is started as an NT service..thats why it didnt work on our case..
    we have modified mgp.bat file to take into account the time delay..
    thanks
    Yugandhar

  • TS3274 screen randomly disappears then after very minutes come back on but on opening page not what I was doing

    screen randomly disappears then after very minutes come back on but on opening page not what I was doing

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • I have an issue with Acrobat, after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?

    after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?

    Not sure of an answer to your basic question, but it may be that you can run a repair (on Windows --> Control Panel>Programs & Features and run the repair on Acrobat). If that fixes the issue, at least temporarily, at least you will not be reinstalling everything -- a real pain.
    Next, open Acrobat and go to the Help to run the updates and be sure you are current. On some OSs, the updates are critical.

  • My new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

    my new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

    settings - general - reset - reset network settings.

  • Wifi sync starts then stops

    iTunes doesn't see my iPhone 5s as being on the same network except for about 10s when iTunes first starts up. It sees it, tries to sync, then it stops (sometimes iTunes gets locked up) and then the iPhone disappears from next to the library and then it's gone. I've worked with with Norton and both Bonjour and all the Apple devices seem ok in the firewall... I am not sure what to try.

    Never mind about the message display, it looks fine now.  Perhaps just a temporary thing.  (Aside: Is anyone else bothered that after signing in Apple doesn't redirect back to the page from which you signed in?)
    After quite some troubleshooting I found if I uninstalled the antivirus (Symantec.cloud, which is basically Norton Internet Security on non-Servers) and turned off Windows Firewall, it still won't connect/sync.  I get the same 10 seconds or so of starting, then it disconnects/disappears from iTunes.  At that point I am not able to ping the phone.
    Further if I ping my phone, my wife's 5s, or our iPad 2 (iOS 7) I usually get "Destination host unreachable" or "Request timed out" until I do something on my phone.  Pinging to an old 3GS works every time.  So it seems like iOS 7 is either turning off networking when it thinks it is not being used, or perhaps throwing up a firewall of its own until the networking is in use.  That may or may not be relevant but in the end if the Symantec software is not installed that's not the problem...the problem would seem to be with iTunes/iOS 7/iPhone 5s.

  • Satellite P850 display turns off after only minute or two of inactivity

    Hi,
    I have my Display settings set to turn off display after 1 hour when on power and 10 minutes when on battery.
    I have a screen saver set up to go on after 10 minutes.
    However, my display often (but not always) turns itself off after only a minute or two of inactivity.
    Can anyone explain this weird behavior?
    It starts up immediately I move the mouse but I just don't like things happening that I haven't scheduled.
    Thanks.
    Hoges

    Hi
    Could it be possible that you changed the settings in the power profile which is not in use?
    I mean in case another application like ECO Utility would control the display brightness, the changes in Windows power plant would be useless.
    Toshiba ECO Utility for example contains some settings like dim display after
    I think you should check this utility

  • Every time I try to go to any web-site I get an error msg that Firefox wont open up but after a minute or two it opens after all ?

    Lets say I click on G-mail on my desktop shortcut. After a couple of seconds I get a box in middle of screen that says Firefox cant find that web site. Then the site will open up after a minute or so ???????????????

    Try:
    *http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

  • Quick Time Movies start halting after 20 minutes

    I have a lot of movies in my presentations, most 30 minutes or so. After 20 minutes the Quick Time movies start halting, as if there's only 10 frames per second played, audio has no problem. The movies are made in FCP and exported as Quick Time movies. Anybody else has the same problem?

    I found out that if you stretch the moviescreen too much Quick Time can't handle it any more ( stretching and playing) and after about 20 minutes it starts halting ( as if it only plays 10 frames per second).
    I play the movies on a big screen with 500 x400 pix, that works fine!

  • When I open aperture it opens then after a minute I get the spinning ball and the program freezes

    When I open  aperture it opens, after a minute I get a spinning ball and the program freezes.

    Try holding down the Option and Command keys while opening Aperture. Click Rebuild Database. Dumping preferences couldn't hurt.

  • HT5569 Backup started then after two hours Message " prior backup not completed"

    Successfully connected to WI FI trying to back up my contacts, etc. Entered "Back up Now" and backup started with the message " expected completion time: two hours. Did not touch the phone. After two hours, I checked the phone. Got message" Prior Backup not completed".  Al Aloisi    .

    Is iPhone in wall power charger?

  • Lightroom Mobile Sync starts over after Yosemite upgrade

    My Mac spent weeks uploading 100,000 photos to Lightroom Mobile.  Now, after upgrade to Yosemite, it suddenly shows "Syncing 100,000 photos" in status.  Why does it think it needs to re-upload?  Would it happen on every OS X upgrade?  This is a very serious regress...
    UPDATE: Actually it's going through them very quickly, seems to be some checksum comparison rather than full reupload.  Already at 66K.  Still wonder why OS upgrade triggered it. 
    A+

    Could it be that you  made metadata changes or  a 'Save Metadata to file' on all images, that would trigger such an update. 
    An update to Lr itself is very likely to cause a resync of metadata as we often add metadata fields to sync. So if you did that, you'll see it go to 100000 in your case and then quickly drop down.
    -Guido

Maybe you are looking for

  • Non DD charges

    Ok today I was stuck in a meeting and Non Direct debit charges were brought up and it got me to thinking If you pay quarterly Bt demand the money within 1 working week of the email(paperless billing) However for that 1 Payment you are charged 3 month

  • After recent upgrade, Firefox won't start. Just flickers once when I click on a link or on its icon.

    My version is 32. "Best Solution" says click the upgrade button to get v34. But I can't do that if FF won't open. I have Mac OS 10.9.5

  • Is JDBC  thin driver 10.1.0.3 compatible with ORACLE-10.2.0.2.0 ?

    Hi Everyone, Please let me know whether the JDBC thin driver 10.1.0.3 Driver compatible with the oracle server 10G version 10.2.0.2.0? We are facing some issues with the compatibility. The Errors we are getting is : StaleConnectionException while we

  • Premiere CS 5.5 - audio export problem

    I am running into a weird problem today. I have a few premiere projects and am rendering quicktime. I am able to render all projects but in one, the audio just does not get exported. I have also tried copying the sequence and pasting in a  new premie

  • Query designer and Standard deviation result rows

    Hello everyone, Here is my problem. I have a key figure for which I do not want any decimals. So in the Number Format : Number of Decimal Places = 0. I thought the result rows would follow the same rules by not displaying any decimals. But using the