Syncing stops in the middle, get an error code 838...

Hi.  Was trying to sync Ovi Suite w/ Outlook 2007.  In the middle of syncing contact or calendar, it stops and I get an error message "Sync cancelled", telling me to reconnect the USB and retry, and with an error code of 83860005.
Tried reconnecting...same result.
Anybody know of a solution?
Thanks.

Hello,
To all those with problems of synchronizing a Nokia N8 between OVI and Outlook (personally I have version 2007) the solution is as follows and it works perfectly.
1) Start / Control Panel / Mail - You must have a single user account Outlook. It is possible that others exist due to problems using your Outlook. You need merely remove them.
2) In OVI, you will see that you can configure the synchronization of your calendar, tasks, notes and bookmarks.
Do not get excited over after your Nokia N8 which is purely genial or after Nokia because the version 3.0.0.284 works perfectly. Just be patient and set your parameters correctly.
Good luck to all.

Similar Messages

  • I get a error code 1150 when trying to sync my ipod touch

    when syncing my ipod touch, i get an error code 1150

    See:
    iTunes Error 1150 while syncing music...: Apple Support Communities

  • When I sync with my iphone i get an error reporting message but the sync still works.  After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds until I quit Entourage.  How do I turn this message off?.

    Question: 
    When I sync with my iphone I get an error reporting message but the sync still works.  After trying to download 10.6.3 Mac OSX Snow Leopard, this message appears every few seconds as long as Entourage is open.  This continues until I quit Entourage.  How do I turn this message off? It interferes with any other work I am doing.   I appreciate any suggestions.

    I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
    I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
    Edit: I just removed every project I have from the Media Browser. Still no luck.

  • TS2634 My problem - when syncing and error messages  comes up:  iTunes could not sync calendars to the iPhone because an error occurred while margin data."  I've tried turning the phone off and back on, & tried both USB ports but get the same thing.  What

    My problem - when syncing and error messages  comes up:  iTunes could not sync calendars to the iPhone because an error occurred while margin data."  I've tried turning the phone off and back on, & tried both USB ports but get the same thing.  What can I do next since it doesn't give me even one clue as to what the error would be?

    Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted :  a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone.  I deleted that event, then went through the calendar resync one by one, and all seems OK now.
    In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them.  It would be nice to have a similar way to work with Calendar!
    Thanks for pointing me to the right article.

  • When syncing my iphone i get a msg, "itunes could not sync calendars to the iphone because an error occurred while merging data"   I sync my calendar to outlook.  My iphone calendar has all and the most updated information.  Outlook shows only recurringMY

    I'm at a loss as to what to do. Any help is appreciated.  When syncing my iphone I get an message, "itunes could not sync calendars to the iphone because an error ocurred while merging data" I sync my calendar to outlook.  My iphone calendar has all and the most updated information.  Outlook calendar only shows my recurring events. 

    hi there,
    i've found a great & simple solution for this problem
    just open your iCloud acc on iPhone
    turn off calendars (it wil ask you to keep info or not - KEEP IT!)
    and turn back on (MERGE!)
    now SYNC it..
    and that's it
    PS in my case it was contacts so the procedure is the same..

  • When syncing i phone with i tunes i get...."iTunes could not sync contacts to the iPhone because an error occurred while merging data"....HELP

    when syncing i phone with i tunes i get...."iTunes could not sync contacts to the iPhone because an error occurred while merging data"....HELP

    hello
    see here the procedure that worked for me:
    https://discussions.apple.com/message/16880485#16880485
    good luck

  • When trying to download or sync podcasts, I get an error code "you do not have the privilege to make changes". Please help!

    When trying to download or sync podcasts, I get an error code "you do not have the privilege to make changes". Please help! I tried uninstalling iTunes and reinstalling, but that did not work. Also, I rebooted and that didn't work, either.

    I tried to use an external hard drive from my windows computer that was formatted in NTFS Windows format.  Mac Pro sees that hard drive as "read only".  Itunes works on existing media on the hard drive to play music or movies, but when you try to purchase from itunes store and download you get the above message.  You need to move your library to a library that is formatted in exFAT format (which can be used both by "windows" and mac computers. 

  • My scanner is stopping in the middle of a scan. it then gives me an error message

    my scanner is stopping in the middle of a scan. it then gives me an error message that communication cannot be established and to restart my printer.  restarting printer/scanner did not gelp

    What printer?
    Can you make a copy from the front panel of the printer?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HT1657 watching a movie on Apple TV and it just stops in the middle of it.  Try settings and check for rental and just get the spinning wheel for over 30 minutes.

    Can't seem to finish a movie on AppleTV.  It just stops in the middle of movie and returns to menu.  Try to check for rentals under settings like it says to when we try and download movie again and all I get is a spinning wheel.  At least the second this has happened in the middle of a movie.  Beginning to think AppleTV is junk!

    Hello Pauljfield,
    You may want to report the issue you've had with your rental to the folks in our iTunes Store.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Cheers,
    Allen

  • I have win7, outlook 2007 tried to sync with icloud but i get an error message and the calendar is blank.  Thanks apple? Any suggestions from the community?

    I have win7, outlook 2007 tried to sync with icloud but I get an error message and my calendar is blank.  I do not see my outlook calendar, on the left pane under all calandar I see my me account checked and all others are unchecked. I looked at icloud and all the data is in and the iphones syncl with ipad but something is not right with my PC Outlook.   I cannot get back to the good old mobileme. Thanks APPLE? Any suggestions from the community?

    This issue can be caused by corrupted cookies.
    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    * http://kb.mozillazine.org/The_page_is_not_redirecting_properly

  • I have had two movie rentals, stop in the middle of downloading tonight, both giving me the error message "(err = 50)" -- It looks like its a network connectivity message, but I'm connected.  Any idea on what could be causing this?  No info anywhere!

    I have had two movie rentals, stop in the middle of downloading tonight, both giving me the error message "(err = 50)" -- It looks like its a network connectivity message, but I'm connected.  Any idea on what could be causing this?  I cannot find info anywhere!
    Thanks for any help

    If you have anti virus software installed, disable that.
    Try turning off the Firewall in System Preferences > Security
    iTunes: Advanced iTunes Store troubleshooting
    It would help when you post to tell us which Mac OS X you have installed. Thank you !!

  • Rented a movie and it stopped in the middle of the movie and now we can not get it back on without renting again. What do we do to get our movie back?

    Rented a movie and it stopped in the middle of the movie and now we can not get it back on without renting again. What do we do to get our movie back?

    Have you tried going to settings - iTunes store - check for rentals? If it does not initially appear try logging out and back into your account.

  • HT201413 i have tried resetting my iphone 4 but keep getting an error code at the end (34)

    I HAVE AN IPHONE 4, I HAVE TRIED RESETTING THE PHONE BUT KEEP GETTING AN ERROR CODE AT THE END OF THE RESET ie;34, ANY IDEAS PLEASE

    I'm not certain thats the problem. I stopped antivirus, I set screensaver to NOT trigger and yet it took me FOUR DAYS to completely sync my ipod touch. Stupid me decided to try it with the iPad and guess what...it's been three days and STILL timing out.
    I don't think Steve Jobs died; I think they upgraded him to iOS5, he crashed and they could not restore him.
    THIS UPGRADE *****. They rushed it out the door to get the fancy-dancy voice command thing on the iphones and yet that feature does not help ipod or ipad users.

  • Itunes stops working and I get an error message "APPCRASH" when I try to play a downloaded TV show. I have udated Itunes and removed and reinstalled quicktime.

    When I try to play a downloaded TV show, itunes stops working and I get a error message "APPCRASH". I have updated itunes and removed and reinstalled quicktime.

    Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
    ... and click OK.
    Quit the QuickTime Player if you have it open. Restart the PC and try watching the videos in iTunes again. Do they play now?

  • Help! AME Stops in the Middle of Encoding - AME 5.5

    Hello - I am hoping someone can help me as I am hitting a brick wall with my production suite! I am going to be as detailed as possible however I am not an expert in how software and my hardware interact.
    Issue - My Adobe Media Encoder stops in the middle of encoding and does not complete the task in the queue.
    Software -
    1. Adobe Production Premium - Premiere Pro CS 5.5 (v5.5.2) and Adobe Media Encoder (v5.5.1.12)
    2. Mac OSX v10.7.5
    Hardware -
    1. 12GB Ram
    2. ATI Radeon HD 5770 1024MB Graphics Card (obviously not supporting Mercury Engine)
    3. 2x 2.4GHz 6-Core Intel Zeon
    Issue History
    - Until this point, all of my projects, videos, and exported media have been 78 minutes or less. I am now working on a project that is 112 minutes of full HD footage. Before Thursday, AME has performed flawlessly for me. The project in Premiere Pro has source video footage that is 1920x1080 29.97 (50mbps). On this Premiere Sequence there are several dynamically linked AE compositions with upper and lower thirds and titling. Finally, there are maps that are in native 720p size movies that are scaled to fit throughout the program at the beginning of each chapter.
    - I am attempting to export and encode this video for use in Encore. I have queued the project for export out of Premiere into AME using the following settings:
    H.264 Blu-ray
    Video Only
    VBR 1-pass
    Custom Bitrate - 26.5 target, 35 max
    Render at Maximum Depth
    Use Maximum Render Quality
    Prior to Updates in Software:
    - On Thursday I queued 4 files for export: 2- PCM audio only files, 1-H.264 Blu-ray video only, and MPEG-2 DVD video only
    - AME ran over night and produced the following: 2 audion files completed successfully, 1 H.264 file completed successfully, MPEG2 file seemed to be 'hung up" and AME was not responding.
    - Shut down/forced quite AME and tried to encode only the H.264 file. The encode failed as it hung up at different points in each attempt in AME.
    - I searched and installed updates for my adobe production suite (premiere pro, AME, and others were updated to the versions listed above).
    - Friday I attempted to export the H.264 file from Pr to AME and it encoded successfully!
    After Updates were Installed:
    - I had to make some additional revisions to the project in Pr after reviewing a draft Blu-ray. Now trying to export the revised video has failed each attempt:
    - On Saturday, I experienced the following results with AME:
    2 PCM Audio Only files - encoded successfully in AME (with Pr running)
    H.264 Video Only file (specs above) failed - the AME froze about 1/3 through the composition.
    At this point I shut the computer down and let it sit overnight.
    - Today (Sunday), I tried again and experienced the following:
    H.264 Video Only encode (same specs) though this time I shut down Pr thinking this would save RAM and the encode failed again. I did notice that it locked up at the same point as the previous attempt on Saturday which was a new symptom.
    RAM usage was 7-9GB during the encode.
    The place where AME locks up is immediately before a transition from the source video to the 720p map footage. Although there are two other segments with the same transitions and 720p footage that it did encode through.
    I have researched this issue on this forum and have read the following thread thoroughly: http://forums.adobe.com/thread/856263
    The above thread described the issue I was encountering before I installed the updates precisely. But now I am still unable to successfully encode this project in AME to H.264?
    I am hoping someone can provide something to help, I have a completed project and I can't get it encoded! (I contacted Adobe and they said my SW was now unsupported from their customer service).
    Thanks for any help with this!!!
    Chris

    Thank you Todd for your quick reply - I contacted Adobe via Live Chat and never got a case number... I did however send the transcript of the conversation to my email...
    Khongyairong: Please give me 2-3 minutes while I check and see what best I can do to resolve this issue.
    Christopher Kratzen: sure - I have checked the forum for similar issues and found that there was a large thread on the subject - but no clear solution. I am starting to panic because I can't get my project to export
    Khongyairong: Okay . Thank you.
    Khongyairong: Thank you for your patience.
    Khongyairong: Christopher, I am sorry to inform you this, we don't have support for CS5.5 , we have support available only for CC and CS6 . I request you to please refer support portal or forum where you can repost your issue and our experts will be giving you the answers.
    Khongyairong: You can also purchase the phone support if you want a support.
    So your advice would be to pursue Adobe Technical Support on this issue? I wasn't sure how to go about this since I really haven't had an issue until now... the production suite does a spectacular job with everything else! Just need to get my finished program encoded....

Maybe you are looking for

  • How do I find the AS that this links to in my flash file via "find"?

    I have a flash file that I have on a web page. When I hover over the Join Us image, the mouse changes to a hand. I can click on the "button" but it doesn't take me anywhere. I'm trying to find out if there is a way to find the link in my Flash file v

  • How to compile all forms in a directoy at time?

    Hi friends, thank for your replies for the previous questions. Now How to compile all form modules located in a directory at a time? usually what I know is opening form one by one and compile it. But I want to compile all forms and create executable

  • Use Numbers to print Address Labels

    I know Excel allows you to export a spreadsheet to print labels with, but being a die-hard Apple guy, there's no way I'm going to fork over that much money for a M$ product when I have a perfectly good spreadsheet app right here. Does anyone know of

  • Raster ignores DataBuffer offset?

    I try to create an Image from a byte array. I know the datalayout of my imagedata, ARGB with one byte per colorcomponent. As a first test, I created a ComponentColorModel and a DataBufferByte from my byte array. The raster is created with this colorm

  • VirtualProvider reading open request

    Hello friends, I created a VirtualProvider based on Data Transfer Process for Direct Access reading data from the Real-Time InfoCube. When I read the data via this VirtualProvider, it reads no data from the open request in the Planning Cube. The sett