Syncing time for several cameras

Hi,
I got married a month ago and I have a huge load of pictures comming from several cameras. The problem is, most people don't set up correctly time in their cameras and I would like to have them in sequence.
Question : is there a way to add a certain amount of time to a whole group of pictures ? (let's say for instance that I want to add 2 hours an 13 minutes to 50 pictures at once).
I have tried batch change, but it attributes the same hour to allthe pictures changed...
Thanks !
Fred

Have you checked out
Photos -> Adjust Date and Time.
That's exactly what that does.
Regards
TD

Similar Messages

My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black

My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!

Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!

HT202159 After clicking install, "an error has occurred" pops up. Tried it several times for several days already, the same happens.

Just recently purchased Quartet for Keynote, downloaded it after clicking install, "an error has occurred" pops up. Tried it several times for several days already, the same happens.

Try the developer's site FAQ;s ...
http://graphicnode.com/support/faq/
Their contact info here > http://graphicnode.com/support/contact/
Check GateKeeper
Open System Preferences > Security & Privacy > General
Make sure App Store and indentifed developers is selected.
If not, click the padlock icon to make changes. You may be prompted for your admin password.
Then try downloading the app.

Snow Leopard does not auto adjust time for digital camera

For some reason when I connected my digital camera this morning to auto adjust its time to reflect DST I ended up having to do it manually. Is this not a feature of SL? I did this a hundred times in Tiger without hassles. Maybe I am missing something. I am not using iPhoto for my imports.

I'm curious what software you are referring to. I doubt this is the fault of SL but rather a change in the Canon software. I know Canon's "Camera Window" has changed over the last while if that is what you are referring to but I don't remember seeing a time setting in it ever. Can you look back at the name and version of the software you are referring to?

Report showing independent requirements for several materials

Hi
Workiing in SAP 4.7
Looking for a report where I can see independent requirements over time, for several materials, based on a time characteristic such as month/week. So for example I want to see the independent requirements for 10 different materials in a list, with the time characteristic on the horizontal axis.
Is there any such report? I am NOT asking for MD05/MD06/MD61/MD62.
Thanks in advance,
Lars
Edited by: Lars Tornblom on Apr 27, 2011 10:09 AM

Check in MD73
if you are using requirement plan then check based on requirement plan else check based on MRP controller by giving period

Sync times - wireless vs ethernet

I clocked sync times for moving a movie from iTunes on my computer to the Apple TV with three different connections:
Airport Express 25:50
Airport Extreme 12:56
Ethernet 3:47
Wired Ethernet connection was 7x faster than Airport Express & 3.4x faster than Airport Extreme.

but the port on the AppleTV is not a GigE port so that should mean that it can only do 100base Ethernet speed at best... weakest link and all that...
Ports and interfaces
* HDMI (video and audio)7
* Component video
* Optical audio
* Analog RCA stereo audio
* 10/100BASE-T Ethernet
* USB 2.0
* 802.11n wireless networking6
* Built-in IR receiver (works with included Apple Remote)
http://www.apple.com/appletv/specs.html

IPad app - self timer for video?

I'm looking for an app for my iPad 2 that is a self timer for the camera when in video mode. I'd like it to delay at least 10 seconds and it would be great if I could preset the recording time to say, 5 or 10 seconds. I've looked but can't seem to find anything.
Thanks, Brad

Here are some additional info: I've emailed the developers of Gorilla Cam and following their suggestion I've turned off my iPhone and after restarting it worked ok... for some time. Camera Awesome and Camera+ also works ok after iPhone restart.
I take a lot of photos and it looks like every few hundreds of them I need to restart the phone.

TS1702 The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, they post exactly 4 hours earlier than the correct time on my Yahoo Calendar. Does anyone have a "fix" to correct the "time

The Calendar app that came on my i4S Phone does not sync the correct time for items posted on my Yahoo Calendar. Actually, items post exactly 4 hours earlier than the correct time on my Yahoo Calendar. My i4S is in the correct New York time zone. Help?

I posted this question a while ago and didn't receive any responses but there are a lot of people who have viewed it and 10 have said they have the same question so I thought I would update you that I added my nanny to my exchange server account (created an email for her) and I send all invites to that email address and they work. So sending invites from an exchange server account to a non-exchange server account apparently is a bug so to solve it, get on an exchange server I guess.

Can you sync many clips at once for multi camera? Or do you have to do them one pair at a time?

I want to know if i can highlight all the clips form 3 different camera angles at once and just sync them for multi clip. Or if I should go through all the clips one by one...find both matches from the other angles and then sync them one at a time. I'm asking bec i tried syncing them all at once when I was using Final Cut and my computer crashed and I dont want my computer to crash again. Hope this makes sense.

I happily synced 2 video (with audio) and a separate audio track using Audio Sync so it seems the answer is yes. It doesn't always work for me but when it does it's a wonderful addition.

Recently purchased Iphone4 after owning an itouch for several years. after syncing only 37 out of over 500 contacts came across to the new phone. any ideas what i'm doing wrong??

I recently purchased an iphone4 after owning a itouch for several years.after syncing ,only 37 out of over 500 contacts came across to the new phone.any ideas what i'm doing wrong

Did you already try to reset the sync history?
If you find that some of your data syncs to your device but you see an unexpected number of changes or modifications, you may need to reset your sync history. This causes iTunes to prompt to Merge or Replace information on the device when you next attempt to sync your information. To reset your Sync History:
Open iTunes.
From the Edit menu, choose Preferences.
Click the Devices tab.
Click the Reset Sync History button.
copied from iPhone, iPad, iPod touch: Troubleshooting contact and calendar syncing via USB on Windows

HT1212 my ipad got disable bcoz of entering wrong password for several time and i got the above method but what if i dont have the same computer which i used to sync my ipad

my ipad got disable bcoz of entering wrong password for several time and i got the above method but what if i dont have the same computer which i used to sync my ipad

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Eth0 is being up and down for several time during boot

My wicd doesn't connect to eth0 on the first attempt after boot up. It is configured to eth0 always have a higher priority to connect.
My dmesg shows that eth0 being up and down for several time during boot. I have e1000e in my MODULES list.
Here is my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK=""
TIMEZONE="Asia/Hong_Kong"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MOD_AUTOLOAD="yes"
MODULES=(acpi-cpufreq fuse tp_smapi vboxdrv e1000e)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="antony-tp"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="yes"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(!hwclock syslog-ng dbus !network !dhcpcd rpcbind acpid @wicd nfs-common netfs @crond cups @laptop-mode @alsa @sensors ntpd @slim bluetooth)
Here is a segment of my dmesg
[ 2.759302] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 2.759304] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 2.759338] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.759348] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.759467] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 2.766107] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
[ 2.766808] ACPI: AC Adapter [AC] (on-line)
[ 2.776492] wmi: Mapper loaded
[ 2.777212] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.777781] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.777783] ACPI: Thermal Zone [THM0] (66 C)
[ 2.778291] iTCO_vendor_support: vendor-support=0
[ 2.780137] ACPI: Battery Slot [BAT0] (battery present)
[ 2.780958] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.781462] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.781547] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.781919] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.783139] cfg80211: Calling CRDA to update world regulatory domain
[ 2.789182] [drm] Initialized drm 1.1.0 20060810
[ 2.789538] hub 4-1:1.0: USB hub found
[ 2.789616] hub 4-1:1.0: 8 ports detected
[ 2.792925] Non-volatile memory driver v1.3
[ 2.795877] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 2.795879] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.795881] thinkpad_acpi: ThinkPad BIOS 8DET54WW (1.24 ), EC unknown
[ 2.795882] thinkpad_acpi: Lenovo ThinkPad X220, model 4290NL5
[ 2.797236] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 2.797352] thinkpad_acpi: radio switch found; radios are enabled
[ 2.797466] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 2.799752] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 2.800067] Registered led device: tpacpi::thinklight
[ 2.800091] Registered led device: tpacpi::power
[ 2.800106] Registered led device: tpacpi::standby
[ 2.800120] Registered led device: tpacpi::thinkvantage
[ 2.800192] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.800254] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.801077] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 2.801162] sdhci: Secure Digital Host Controller Interface driver
[ 2.801164] sdhci: Copyright(c) Pierre Ossman
[ 2.801707] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 2.801709] Copyright(c) 2003-2011 Intel Corporation
[ 2.801744] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.801753] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 2.801789] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 2.801791] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005abc000
[ 2.801793] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
[ 2.801877] iwlwifi 0000:03:00.0: irq 49 for MSI/MSI-X
[ 2.801913] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 2.801962] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 2.802045] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 2.802067] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.802107] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[ 2.802118] _regulator_get: 0000:0d:00.0 supply vmmc not found, using dummy regulator
[ 2.802188] Registered led device: mmc0::
[ 2.803329] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 2.815226] iwlwifi 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6
[ 2.815229] iwlwifi 0000:03:00.0: Device SKU: 0X1f0
[ 2.815231] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[ 2.815247] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 2.845674] iwlwifi 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301
[ 2.845820] Registered led device: phy0-led
[ 2.850630] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.862431] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
[ 2.943648] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:92:77:26
[ 2.943651] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.943712] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 2.943734] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.943739] mei 0000:00:16.0: setting latency timer to 64
[ 2.943817] mei 0000:00:16.0: irq 50 for MSI/MSI-X
[ 2.944502] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 2.945021] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.946341] watchdog: INTCAMT: cannot register miscdev on minor=130 (err=-16).
[ 2.946452] watchdog: error registering /dev/watchdog (err=-16).
[ 2.946523] mei: unable to register watchdog device.
[ 2.946598] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 2.946692] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 2.946734] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.948359] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.948422] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
[ 2.948444] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3.022245] usb 1-1.3: new full-speed USB device number 4 using ehci_hcd
[ 3.172080] usb 1-1.4: new full-speed USB device number 5 using ehci_hcd
[ 3.274597] Bluetooth: Core ver 2.16
[ 3.274611] NET: Registered protocol family 31
[ 3.274612] Bluetooth: HCI device and connection manager initialized
[ 3.274614] Bluetooth: HCI socket layer initialized
[ 3.274614] Bluetooth: L2CAP socket layer initialized
[ 3.274618] Bluetooth: SCO socket layer initialized
[ 3.275535] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.276006] usbcore: registered new interface driver btusb
[ 3.338454] usb 1-1.6: new high-speed USB device number 6 using ehci_hcd
[ 3.444567] Linux media interface: v0.10
[ 3.447387] Linux video capture interface: v2.00
[ 3.448573] input: Logitech Trackball as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6
[ 3.448671] generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1a.0-1.2/input0
[ 3.448690] usbcore: registered new interface driver usbhid
[ 3.448691] usbhid: USB HID core driver
[ 3.449136] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[ 3.450945] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
[ 3.450987] usbcore: registered new interface driver uvcvideo
[ 3.450988] USB Video Class driver (1.1.1)
[ 3.484049] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 3.491137] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 3.491298] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 3.491486] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 3.491637] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 3.491709] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 3.491765] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 3.492050] i915 0000:00:02.0: power state changed by ACPI to D0
[ 3.492053] i915 0000:00:02.0: power state changed by ACPI to D0
[ 3.492059] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.492062] i915 0000:00:02.0: setting latency timer to 64
[ 3.538056] mtrr: no more MTRRs available
[ 3.538058] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 3.538266] i915 0000:00:02.0: irq 52 for MSI/MSI-X
[ 3.538270] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.538271] [drm] Driver supports precise vblank timestamp query.
[ 3.538292] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.664501] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
[ 3.664518] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.716317] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 4.407165] fbcon: inteldrmfb (fb0) is primary device
[ 4.575259] Console: switching to colour frame buffer device 170x48
[ 4.577042] fb0: inteldrmfb frame buffer device
[ 4.577043] drm: registered panic notifier
[ 4.607860] acpi device:01: registered as cooling_device4
[ 4.607985] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
[ 4.608039] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 4.608122] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.757243] EXT4-fs (sda3): re-mounted. Opts: discard
[ 4.765917] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: discard
[ 4.776777] Adding 262140k swap on /dev/sda2. Priority:-1 extents:1 across:262140k SS
[ 5.099467] NET: Registered protocol family 10
[ 6.048650] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.098038] Bluetooth: RFCOMM TTY layer initialized
[ 6.098055] Bluetooth: RFCOMM socket layer initialized
[ 6.098057] Bluetooth: RFCOMM ver 1.11
[ 6.278766] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 6.278893] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6.568639] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 6.568775] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 6.684082] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.176563] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 7.226662] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 7.227110] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.229345] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 10.490618] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[ 10.817814] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 10.819315] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.186166] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 11.186292] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 11.313367] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.665342] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 11.717591] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 11.718042] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.964795] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 12.017213] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 12.017720] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.811264] EXT4-fs (sda3): re-mounted. Opts: discard,commit=0
[ 13.826031] EXT4-fs (sda4): re-mounted. Opts: discard,commit=0
[ 15.178905] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 15.180472] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.663056] eth0: no IPv6 routers present
Any hint for tracing the root of this problem? Thank you very much!

Hi ...
If you have moved the Safari application from the Applications folder, move it back.
As far as the cache goes, there's a work around for that when you can't empty the Safari cache from the menu bar.
Go to ~/Library/Caches/com.aple.Safari.Cache.db. Move the Cache.db file to the Trash.
Try Safari.
Mac OS X (10.7.2) < from your profile
If that is corrrect, you need to update your system software. Click your Apple menu icon top left in your screen. From the drop down menu click Software
Update ...
~ (Tilde) character represents the Home folder.
For Lion v10.7x: To find the Home folder in OS X Lion, open the Finder, hold the Option key, and choose Go > Library

Attempted to sync IPhone 3gs several times, didn't work. Finally did, saved it and then went into recovery. How do I access the saved information?

Attempted to sync IPhone 3gs several times, didn't work. Finally did, saved it and then the phone went into recovery. How do I access the saved information prior to recovery?
Thanks

Hello Snosilla! I'm so sorry for all the confusion and for all the time taken to activate service with us! I do see that the iPhone 5c is $99.99 right now. The iPhone 5s is actually $199.99. There's no need to call Pam anymore, we can take over from here.
I've followed you in the forums. Please accept me, and follow me back. Then, send me a Direct Message and I can look into this for you. If you do not have an active line yet, I may need to get you through to our activations department, but I will do all I can!
Thank you!
ChristinaB_VZW
VZW Support
Follow us on Twitter @VZWSupport
VZW Support

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Extensions like Ghostery, WOT or AdBlock stop working after two or three times. Restarting the webpage in a new tab the extensions will work again for several times and then stop again. Has anybody an explanation or a workaround for this bug in Safari 5?

Remove the extensions, redownload Safari, reload the extensions.
http://www.apple.com/safari/download/
And if you really want a better experience, use Firefox, tons more choices and possibilities there.
Firefox's "NoScript" will block the Trojan going around on websites. Best web security you can get.
https://addons.mozilla.org/en-US/firefox/addon/noscript/
Ghostery, Ad Block Plus and thousands of add-ons more have originated on Firefox.

HT1848 I purchased a album on my iPhone and was playing it for several days... Last night after syncing it to my laptop i no longer have it on my phone and the only thing that shows up in my iTunes is the digital booklet.

How in the world do i get my lost Album back?
I purchased a Album from Itunes on my iphone, Played it for several days. Then when I synced my phone to my laptop, the album is no longer there. It shows up in the Itunes on my computer but only as the digital booklet, which you are supposed to get after a purchase.
I tried downloading all songs into itunes, that didnt work. I tried logging out of my account with no avail. I tried seeing if i could go into iTunes again and buy redownload it. But it showes that I have to purchase it again...
Any help would be appreciated.
Thanks

Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519

Syncing time for several cameras

Similar Messages

Maybe you are looking for