Syncing View In Compare Mode

Basic question, perhaps a dumb question but. . .
In compare mode, when zoomed, how do you sync focus on the two images?
e.g., I'd like to be able to look, say, at the same spot on two pictures and then, when scrolling across one, have the other move in unison. I'm migrating from Lightroom which has this feature. Adobe calls it Sync Focus. I'd be surprised if Aperture did not, but damned if I can locate it.

Ok, well you can.
first you need to zoom (z) in on the images selected, the problem is that if your mouse is current primary (the image with the fat white border) and you use zoom that that image will zoom to where your mouse is and the other to the center, so they will already be misaligned
When in zoom mode you can press the Spacebar and then the mouse will turn in a hand which you can use to drag the image, to move around it. If you have two images selected using only the Spacebar will move only one of the images, if you have both the Spacebar and Shift down you will move BOTH images. so you should first make sure that after you use zoom that the images are properly aligned, and then use shiftspacebardrag to move around the images.

Similar Messages

  • Rating in compare mode not working as it should?

    I have the impression that in 2.7 the rating of a pic was
    independent of the rating of the other pic. That seems not to be the case anymore.
    Can someone confirm this?

    Well... I don't see auto sync in the compare mode. There is a sync button in the toolbar but clicking it doesn't change the button. When in grid mode the first has 2 stars, the second 1 star and when I go to compare mode both have 2 stars, back to grid the first has two and the second has one star... mmm... seems a bug? Playing around with ratings shows some eratic behaviour. When both have stars (in compare mode that is), and I change the candidate to 1 star, all stars from the candidate disappear and the select gets one star. Back in grid that stays that way.
    Anyone else see this
    (I am on windows xpp)

  • Some album artwork missing only when viewed in tile mode.

    Hello, after Restoring to new (to clear up an issue with excessive "other") and updating iPod 5 to iOS 7.1, which corrected issues, I have found an odd glitch with music. Four album covers are missing when viewed in tile mode only. You see them otherwise when viewed any other way, everything plays as it should, it's just there not there in tile view mode, what you do see is black background with white letters telling you the album title and artist name. Have tried powering down, soft reset, Reset All Settings. Going into get info and tapping get artwork. Erasing effected music and syncing albums back into iPod. Erasing entire music library and then reinstalling, and Restore from backup. The same four albums do not appear in tile mode. All effected albums were purchased through iTunes. As far as I know the only other thing to try is the Restore to new, is there something else to try? Thanks.

    Sorry Illaass, been there, done that. No joy! Used the suggested method to delete before posting this. (Picked it up from you when you helped someone else with a similar problem-- it worked for them, but not with this one). It's kinda looking like restoring to new? (Please tell me something else... It's such a pain.)

  • Can I use compare mode with dual monitors? (LR 3.5)

    Hello.
    I'm a new Lightroom user, and was wondering if it's possible to span the compare mode across two monitors, so the curent select is on the left, and the candidate is on the right? This would be extremely helpful for me.
    I've seen another thread from 2009 without an answer, and searching forums doesn't seem to turn up much else.
    Thanks in advance!
    Bart

    You can use Loupe Locked or Loupe Live on the second screen to make comparisons with the primary screen selecting different pictures or views.  Is this a way to meet your needs?  Select Loupe Normal, Live or Locked either in the top toolbar on the secondary screen or hold left click on the 2 second screen icon in the primary screen.
    Goodl uck   

  • IPhone 6 month view in landscape mode??

    hello, was wondering if there is a way to view an entire month in landscape mode on the  regular iPhone 6 just like we can on the iPad?? Couldn't find it and would love this feature if it doesn't exist. I don't schedule things by the hour. I think the screen is plenty big for this and the month view in horizontal mode is useless since the little dots won't show colors.
    Thanks for any info!

    I haven't found a way to display the whole month in landscape view on my iPhone 6. May not exist. You can send feedback to Apple about this here:
    http://www.apple.com/feedback/

  • Unable to open a view in edit mode

    Hi All,
    I have a Notes assignment block in the Account Overview page. It contains a text area and an EDIT button to modify the notes. Corresponding view and context node for this block are  BP_DATA/NOTES and NOTES respectively. Notes context node is bound to Text context node of the component controller.
    The issue is, when agent confirms an account, goes to Overview page and clicks on EDIT button of the Notes block, then, if the block already has some text, then it turns in to EDIT mode. But if Notes section is empty initially, then, on click of EDIT button will not make the view editable.
    During debugging, I can see that if notes section is already filled with some text, then there is an entity in the collection wrapper of the NOTES context node(also in the component controller collection wrapper). But if notes section is initially empty, then collection wrapper is empty(both view and component controller context nodes).
    My requirement is to make the notes section editable even if there is no text present in it initially. It will be very helpful if someone could give me suggestions on this issue.
    Thanks and Regards,
    Naren

    Hi Nitish,
    Thanks for your reply. Infact I only coded the event handler. In the first line, I am reading the entity from the collection wrapper of the context node. If it is bound, only then I can set it in EDIT mode.
    ob_entity ?= me->typed_context->notes->collection_wrapper->get_current( ).
    IF ob_entity IS BOUND.
    Sets the view in EDIT mode
    Now, ob_entity is null if there is initially no data in the notes section of the confirmed account. However, if notes is not empty, then, ob_entity is bound and I can set the view to edit mode. This is the issue.
    Regards,
    Naren

  • Gif file won't animate in Muse's preview mode or in Muse's view in browser mode

    Created a gif file with Photoshop that's 7.5MB in size.  Placed the gif  file on a Muse page.  But, the gif won't animate in Muse's preview mode or when Muse sends the page to be viewed in browser mode.  I'm using a Mac running OS X 10.9.2 and I'm a creative cloud member using Muse.  Any solutions?

    Step one to enable the community to help debug what you're encountering would be to provide the URL for the page where the GIF is being used. My first guess would be there are effects applied to the image (i.e. inner glow, bevel, etc.) that require Muse to re-encode the image and Muse does not support encoding animated .gif. It only supports passing animated .gif files through unchanged. (And to get an image to pass through unchanged it needs to have no effects that require rasterization applied in Muse.)
    Given you've stated the GIF file is 7.5Mb I have to question your choice of .gif. At 7.5Mb this single file will take ~8 seconds to download on the average US broadband connection and will be much slower for many broadband users and most cellular users. GIF is a reasonable choice for very small short animations used sparingly, but is seldom (if ever) a good choice for larger or longer animations. Better choices for those are to use a video or a tool like Edge Animate to create a HTML5/CSS3 animation. The end result will be vastly more user friendly in terms of page load performance.
    A huge percentage of first time visitors to a webpage will cancel the page load rather than waiting 8+ seconds for the page load to complete.

  • I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what's up with that?

    I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what’s up with that?

    You need to do the basic troubleshooting steps described in the User Guide, Appendix B.
    Restart phone
    Reset phone
    Restore in iTunes using a backup
    Restore in iTunes as new, without using a backup
    If restoring as new doesn't help, there is a hardware failure in the phone that needs evaluation by Apple.

  • In Live View and AV mode on 5DMKII the ISO auto changes to 6400 for no reason, any solutiions?

    In Live View and AV mode on 5DMKII the ISO auto changes to 6400 for no reason, any solutiions?

    But my current sim card works just fine in my friends iphone 5...wouldnt the logic follow that the problem is with the device itself (the phone) and not the card?

  • Tree view in collapsed mode by default

    Hello Experts,
    Could you please explain how to get a tree view collapsed by default?
    My scenario:
    When looking for a Marketing Segment, the system displays the result with a tree view in expanded mode, containing all the Profile Sets with their profiles and Target Groups.
    I would like to have the tree view in collapsed mode by default with only the Profile Sets displayed. Then, if need I would expand a given Profile Set to display its Profiles and Target Groups.
    Component: SEGAS_SEG
    View: RTSEG
    Thank you very much for your answer.
    Best Regards.
    Edited by: KenshiroHokuto on Apr 26, 2010 5:15 PM
    Edited by: KenshiroHokuto on Apr 26, 2010 5:16 PM

    Hi,
         Have a look at the context node SEG in the view RTSEG. You will see a method REFRESH. The following lines are responsible for the automatic expansion.
            IF search_roundtrip = abap_true AND lv_index < 20.
              lr_root->expand_node( ).
            ENDIF.
      Going by what you say, you will want to comment out these lines. If your component/view is not enhanced, enhance it and redefine this method. Copy the standard code and alter it. You need to alter this code to suit your requirement. For enhancing the component/view, you can find wikis in the CRM WebClient UI section.
    Regards,
    Arun Prakash

  • Moving from Survey Mode to Compare Mode

    If I am in Survey mode, looking at (for example) 5 photos, I notice that the Toolbar has a button for Comparing 2 of the photos. I know how to get one of the images (it's the one with the narrow white border) for the Compare mode, but I can't seem to figure out how to select the other image. Any ideas? CTRL-click (Windows) on an image removes it from Survey mode.
    BTW, this is a cool feature that allows one to quickly A/B images while in Survey mode.
    Paul

    I don't think you can do what yu want from Survey. Another way to judge images though is to start in compare 'C' with the first image in a series of images you would have put in Survey in a Collection or Quick Collection. The 'Candidate' image will then be the next in line. You right arrow to each of the next images you want to compare to the initial select and uo arrow when you come to one you like better than the initial select and keep going to you go through theyhttree or more images in the Collection.
    Will this get you what you want?
    Don
    Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
    http://donricklin.blogspot.com/

  • Disable thumbnails in Devices sync view

    In the Devices sync view, is it possible to prevent thumbnails, particularly for video, from being preloaded in iTunes 9?
    For example, I have an AppleTV that I sync with my old iMac. With iTunes 9, whenever I click on the "TV Shows" or "Movies" or "Podcasts" tab in the AppleTV view, my entire computer almost comes to a standstill. I suspect that it's because iTunes is loading the thumbnails from my library, especially since I store my videos on an external hard disk.
    Obviously, this is extremely irritating because I can't do anything else in the meantime. (Interestingly, I don't even get the spinning beach ball!)
    I've searched through Preferences and the View menu but can't find anything to disable the thumbnails. Does anyone know of a way? (And no, getting a new computer isn't an option at this time!)

    i have the same question about removing thumbnails from the movies tab since upgrading to version 9, i did notice that only quicktime files i have downloaded or quicktime files i've made are shown as tummbnails, not other files. I have also notice itunes freezes or actually takes a long time to aknowledge my clickng on my ipod or the tabs, version 9 also seem slower than 8.
    have you found an answer elsewhere?
    Bob

  • Mark uncheck from Internet Explorer9Compatibilty View from Browser Mode: IE9 in F12 developer tools

    Hi Friends
    How can I Uncheck option Internet Explorer9Compatibilty View from Browser Mode: IE9 in F12 developer tools through GPO or script.
    OR any other way..
    Help and guide me ..I have tried to do it but could not get succeed.

    Hello,
    GPO questions are better asked to the GPO experts in
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP&filter=alltypes&sort=lastpostdesc
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • How can uncheck Internet Explorer9Compatibilty View from Browser Mode: IE9 in F12 developer tools

    Hi Friends
    How can Uncheck option Internet Explorer9Compatibilty View from Browser Mode: IE9 in F12 developer tools through GPO or script.
    Help and guide me ..

    Hi Mr. Raj,
    Please explain a bit about the following questions for better analyzation:
    1. Is the Internet Explorer version 9?
    2. Why do you want to uncheck the single option?
    3. How about disable the compatibility mode?
    To receive better support about script, it is recommended to seek help in script forum.
    http://social.technet.microsoft.com/Forums/scriptcenter/en-us/home?category=scripting
    Please take a look at the following thread similar to this requirement.
    http://social.technet.microsoft.com/Forums/en-US/74da68dc-dd44-462d-addd-c007169b3370/how-to-uncheck-display-all-websites-in-compatibility-view-in-ie9?forum=ieitprocurrentver
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Dynamical View - Visible / Invisible mode

    Hi,
    I've 5 table in a view of a Web Dynpro and 5 button for any table.
    I need to display only a table dipending the button pushed .
    I think to put 5 table on a view in invisible mode.
    I can't place on all the table each other.
    Have you an idea?
    Tnx a lot.
    Domenico.

    Hi,
    Adding to what Anil has said
    The table has property called Visibile bind this to a context attribute of type WDVisibility.
    The property Visible can take three values
    blank : The UI element is not visible on the screen but takes up space.
    none : The UI element is not visible on the screen and takes up no space.
    visible :The UI element is displayed on the screen.
    In the init method set all the tables visibility to none like
    wdContext.currentContextelement.set"Name of attribute"(WDVisibility.None);
    Then as and when you require to see a particular table set the context attribute to visible.
    Hope this helps.
    Regards,
    Vijith

Maybe you are looking for