Syncing web pages from iPhone to Mac
Is it possible to possible to access web pages that I have open on my iphone through my Mac?
If you follow the simple steps included with this link for your iTunes library backup and restore from said backup with a new hard drive or with a new or different computer, no iTunes content on your iPhone would be erased with the first sync with iTunes.
http://support.apple.com/kb/HT1751
Assuming you have already re-authorized your computer with your iTunes account with iTunes, with your iPhone connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone.
Similar Messages
-
Icloud wont sync web pages from phone...
basically the new feature of picking up web pages from your phone (mine is a 4s up to date) to you macpro (brand new 13 with mountain lion) isnt working..... Im not really mad worrining about it, it would just be a nice feautre to have. When i do click the icould symbol on top of my web page all it says is that icould automatically shows open tabs on you devices.... I have six on my phone that are not showing up. Anyone else having this problem?
also, i hate internet explorer but icloud always opens in it... how do i switch it to open in chrome?
-
Can you sync photo editing from iPhone to Mac
I synced some iPhoto events from my Mac to the new iPhoto app on my iPhone. Then I edited some pictures, red-eye removal and warm/cool balance. Is there a way that the changes to my photo can be copied to iPhoto on my Mac because it doesn't seem to work automatically through syncing.
Connect your iPhone with the cable.
In iTunes, select your phone under Devices and go to the Photos tab on the right.
There you can say "Sync photos from iPhoto" and also select which events you want to sync.
So the photo's sync. But what does NOT sync, is the editing of photo's on your phone, such as red-eye removal. -
I am unable to sync my music from iphone to mac, why?
When I connect my ipone to my mac in order to sync, it does appear as a button in the navigation menu; However I've been able to successfullz sync photos, but NOT Music
It may seem simple, but restart both devices.
on the iPhone hold the sleep and home button until the phone rests (soft reset), then restart the iTunes app. Then plug the phone back in then sync again. -
New address on IPHONE will not appear on MAC a sync problem from IPHONE to MAC
I am having a sync problem but I don't believe many who are offering answers understand the issue. I write/make/create a 'new' contact on my IPHONE 4 address book. I wait for it to sync over air. Yes, on my MAC and on my IPHONE I have it set up to sync over air. That is what it says on the INFO tab on the IPHONE page of the Itunes when I connect the IPHONE to my MAC.
No, I will not turn off the over air sync, I do not want multiple duplicates of my addresses!
On my IPAD I have no problems, my notes sync, my address book syncs but it does not do it from Iphone to MAC???Hi denctanner,
I did read the post. I was simply explaining that Contacts does not sync with the OTA Sync function, it syncs via iCloud if you want to sync wirelessly....
The OTA Sync option on the Info page has nothing to do with the iCloud syncing of your Contacts....
Try deleting your iCloud account on your iPhone and signing on again. Once you have signed iCloud back on, make sure all the options you want checked are checked, and then try it again. (When you delete it, you will get a message that it will delete your Photo Stream and Document but don't worry, when you sign back on, they will come back).
Cheers,
GB -
HT1296 how can i sync every day pictures from iphone to mac?
how can i sync every day pictures from iphone to mac?
i can only sync my app via itunes, and the pictures from my mac to iphone, and not the oppositeWhich Mac OS do you have adn which iPhoto do you have?
Do you see Photo Stream on the left side of iPhoto?
Appletini6
im pretty sure iphoto is for importing. icloud is for photo stream.
Yes but iPhoto can import directly via Photo Stream. -
How do i transferring video from iphone to mac
how do i transferring video from iphone to mac, i synced it but nothing shows up
I don't believe OS X has the ability to receive AirPlay (which is what you're using). There's some advice on the matter on the Wikipedia page, though:
http://en.wikipedia.org/wiki/AirTunes
Scroll down to "Third-party software implementations". -
How can I transfer contacts from IPHone to Mac?,
First of all, thanks to everyone who will help me.
I syncronised many times my Iphone 3GS with Mac and everything was OK (apart that I found all the contacts twice or 3 times in Iphone).
I backuped Iphone sometimes on the Mac and others on ICloud.
Last time, I found that the adress book in Mac was almost completely empty (only 10 or so contacts, all the groups empty) but I have everything in the IPhone.
How can I now get to transfer all the contacts from IPhone to Mac?
Thanks again
AnnaDeleted the contacts from where? The device? the computer? both?
Use the backup of the computer to put them back if they have been deleted off the computer. Once that is done, they can be synced to the iPhone. -
First sync after moving from windows to mac
Hi,
I just decided that I'm fed up with reinstalling and bought a new iMac (OS X). I've found a lot of posts about moving iTunes and music. But Im still afraid to do the first sync.
What I want to know is what will happen with my contacts and callender?
On the old comp I used to sync the iPhone with outlook.
If I sync now with the new library on the mac, will all my contacts and callender be deleted? Or will they be copied from iPhone to mac?
I also have the old iTunes library on an external hard drive. Is that any help?If you haven't transferred contacts and calendar events from Outlook on your PC to the Address Book and iCal on your Mac and you don't plan on doing so, before syncing this data on your Mac, enter one unique contact in the Address Book and one unique calendar event in iCal on your Mac. Make this up if needed, which can be deleted later. This will provide a merge prompt with the first sync of this data, which you want to select.
-
How do i get pictures from iphone to mac?
How do i get pictures from iphone to mac?
If you want your photos to end up in iPhoto, just do a normal sync. If you don't want to use iPhoto, or if you just want to put your phone photos in a normal visible folder on the desktop, luckily when you plug in the iPhone a Mac sees it like a camera or card reader. This means the iPhone will show up in common applications that have an import-from-camera feature. I've copied photos off my iPhone using Apple Image Capture, PhoneView, and Adobe Lightroom, for example.
-
866VAE - cant acces web pages from LAN
Hi everyone,
im fighting with Cisco 866VAE-K9 for few days. I have got ADSL2+ line in Cisco, i can ping anything from router (like 8.8.8.8 or www.google.com), test of connection in CCP runs successfully, but i cant acces web pages from LAN computers. From LAN i can ping to any IP adress in internet (like 8.8.8.8), but i cant ping or access domain names of web pages (like www.google.com). I know there is probably something wrong in my config, but after 2 days of googling i cant find where the problem is. Can anybody help?
Here is my running config:
Building configuration...
Current configuration : 8181 bytes
! Last configuration change at 11:31:15 UTC Fri Mar 6 2015 by admin
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname cisco_866vae
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
enable secret 5 xx
enable password xx
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
wan mode dsl
ip port-map user-protocol--1 port tcp 3500
ip name-server 8.8.8.8
ip cef
no ipv6 cef
parameter-map type protocol-info yahoo-servers
server name scs.msg.yahoo.com
server name scsa.msg.yahoo.com
server name scsb.msg.yahoo.com
server name scsc.msg.yahoo.com
server name scsd.msg.yahoo.com
server name cs16.msg.dcn.yahoo.com
server name cs19.msg.dcn.yahoo.com
server name cs42.msg.dcn.yahoo.com
server name cs53.msg.dcn.yahoo.com
server name cs54.msg.dcn.yahoo.com
server name ads1.vip.scd.yahoo.com
server name radio1.launch.vip.dal.yahoo.com
server name in1.msg.vip.re2.yahoo.com
server name data1.my.vip.sc5.yahoo.com
server name address1.pim.vip.mud.yahoo.com
server name edit.messenger.yahoo.com
server name messenger.yahoo.com
server name http.pager.yahoo.com
server name privacy.yahoo.com
server name csa.yahoo.com
server name csb.yahoo.com
server name csc.yahoo.com
parameter-map type protocol-info msn-servers
server name messenger.hotmail.com
server name gateway.messenger.hotmail.com
server name webmessenger.msn.com
parameter-map type protocol-info aol-servers
server name login.oscar.aol.com
server name toc.oscar.aol.com
server name oam-d09a.blue.aol.com
crypto pki trustpoint TP-self-signed-2886901321
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2886901321
revocation-check none
rsakeypair TP-self-signed-2886901321
crypto pki certificate chain TP-self-signed-2886901321
certificate self-signed 01
controller VDSL 0
class-map type inspect match-any SDM_BOOTPC
match access-group name SDM_BOOTPC
class-map type inspect match-any ccp-cls-protocol-p2p
match protocol edonkey signature
match protocol gnutella signature
match protocol kazaa2 signature
match protocol fasttrack signature
match protocol bittorrent signature
class-map type inspect match-all ccp-cls--1
match access-group name all
class-map type inspect match-all ccp-cls--2
match access-group name all1
class-map type inspect match-any ccp-cls-protocol-im
match protocol ymsgr yahoo-servers
match protocol msnmsgr msn-servers
match protocol aol aol-servers
class-map type inspect match-any SDM_SSH
match access-group name SDM_SSH
class-map type inspect match-any SDM_HTTPS
match access-group name SDM_HTTPS
class-map type inspect match-all SDM_GRE
match access-group name SDM_GRE
class-map type inspect match-any SDM_SHELL
match access-group name SDM_SHELL
class-map type inspect match-any sdm-cls-access
match class-map SDM_HTTPS
match class-map SDM_SSH
match class-map SDM_SHELL
class-map type inspect match-all sdm-access
match class-map sdm-cls-access
match access-group 101
policy-map type inspect ccp-policy-ccp-cls--1
class type inspect ccp-cls--1
pass
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--2
class type inspect ccp-cls--2
pass
class class-default
drop
zone security out
zone security in
zone-pair security sdm-zp-in-out source in destination out
service-policy type inspect ccp-policy-ccp-cls--1
zone-pair security sdm-zp-out-in source out destination in
service-policy type inspect ccp-policy-ccp-cls--2
interface Loopback0
ip address 192.168.100.1 255.255.255.0
zone-member security in
interface ATM0
no ip address
no atm ilmi-keepalive
interface ATM0.1 point-to-point
pvc 8/48
oam-pvc manage
pppoe-client dial-pool-number 1
interface Ethernet0
description $ETH-WAN$
no ip address
shutdown
pppoe-client dial-pool-number 2
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface GigabitEthernet0
no ip address
interface GigabitEthernet1
description $ETH-WAN$$FW_OUTSIDE$
ip address dhcp client-id GigabitEthernet1
ip tcp adjust-mss 1412
shutdown
duplex auto
speed auto
interface Vlan1
description $FW_INSIDE$
ip address 192.168.7.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
zone-member security in
ip tcp adjust-mss 1412
interface Dialer1
no ip address
interface Dialer2
description $FW_OUTSIDE$
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly in
zone-member security out
encapsulation ppp
dialer pool 1
dialer-group 3
ppp authentication chap pap callin
ppp chap hostname o2
ppp chap password 0 o2
ppp pap sent-username o2 password 0 o2
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip nat source list 101 interface Dialer2 overload
ip nat inside source static tcp 192.168.7.39 3500 interface Dialer2 3500
ip nat inside source list 101 interface Dialer2 overload
ip nat inside source route-map MAP_ACL interface Dialer2 overload
ip route 0.0.0.0 0.0.0.0 Dialer2 permanent
ip route 192.168.2.0 255.255.255.0 192.168.7.3 permanent
ip access-list extended NAT_ACL
deny ip 192.168.0.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.0.0 0.0.0.255 any
ip access-list extended SDM_BOOTPC
remark CCP_ACL Category=0
permit udp any any eq bootpc
ip access-list extended SDM_GRE
remark CCP_ACL Category=1
permit gre any any
ip access-list extended SDM_HTTPS
remark CCP_ACL Category=1
permit tcp any any eq 443
ip access-list extended SDM_SHELL
remark CCP_ACL Category=1
permit tcp any any eq cmd
ip access-list extended SDM_SSH
remark CCP_ACL Category=1
permit tcp any any eq 22
ip access-list extended all
remark CCP_ACL Category=128
permit ip any any
ip access-list extended all1
remark CCP_ACL Category=128
permit ip any any
access-list 2 remark CCP_ACL Category=2
access-list 2 permit 192.168.7.0 0.0.0.255
access-list 101 remark CCP_ACL Category=128
access-list 101 permit ip any any
access-list 101 permit udp any any eq domain
access-list 101 permit udp any eq domain any
dialer-list 1 protocol ip permit
dialer-list 2 protocol ip permit
dialer-list 3 protocol ip permit
mac-address-table aging-time 15
route-map MAP_ACL permit 10
line con 0
no modem enable
line aux 0
line vty 0 4
exec-timeout 40 0
password xxxxxxx
transport input telnet ssh
transport output telnet ssh
scheduler allocate 60000 1000
endHi,
I would be happy to help but I have one question first: Your configuration contains a lot of cruft generated from SDM/CCP and I am not sure if any of that is really required by you. Do you believe you would be fine with having this entire configuration trimmed down and do just what's supposed to do (routing and NAT), and we had security measures added in later? Just by the way, I do not believe you need the zone-based firewall. In your simple setup with just a few inside/outside interfaces, it does not add any real value apart from making the configuration virtually unreadable. We can easily do the same with IP Inspect.
Best regards,
Peter -
Access existing web pages from '08?
Here's the deal - I have had web pages set up with iWeb '06 w/Tiger, no problem. I installed (on a separate disk) Leopard, and iLife 08. So, if I boot from my Tiger disk, all is well, I can edit my web pages using iWeb '06.
When I boot to my Leopard drive, and use iWeb '08, it just comes up to the default 'choose your layout' - it knows nothing about my existing .Mac web pages.
How do I open my existing web pages from a different drive / partition using iWeb '08, that was created from iWeb '06 on a different boot drive?
Many free beers await the first person to help me out on this. Thanks,
John FHi John,
Have a look at the following page
http://transfer.iwebfaq.org
The only thing that changes for you is that you're transferring it from one drive to the other instead of from one computer to another.
Please make a backup of the file before getting your site into iWeb '08 (and after if it was successful). Be sure to update the iWeb application before opening your website with it (get it to version 2.0.2)
And note that once you updated the site to iWeb 2.0 it can't be edited in iWeb '06 anymore.
I don't drink beer sorry...
Regards,
Cédric
"I don't receive any form of compensation, financial or otherwise, from my recommendation or link" -
Web pages from one computer to another
Hi,
While in Italy for two months I made a large number of web pages on .mac from over 1000 pictures. These pages are on my MacBook.
When I returned I successfully transferred the pictures from my MacBook to my iMac.
HOWEVER, neither the smart albums or web pages (not smart) transferred.
Is it possible to export web pages from Aperture from one computer to another? How?
But how do I move the web pages from my portable to my desktop machine? -- And for that matter can you move smart albums from one machine to another?
Thank you.Scott Grabinger wrote:
Is it possible to export web pages from Aperture from one computer to another?
yes. aperture is very flexible working with web sites and projects/albums
How?
what I do is build the web site, example, web journal and then "Export Web Pages." aperture will make a folder of your site with all the css, indexes, photos etc. you can then drag and drop this folder anywhere you'd like.
I export that folder into my local_site root folder in Dreamweaver and tweak the css from there
you can also use iweb
But how do I move the web pages from my portable to my desktop machine?
see above
-- And for that matter can you move smart albums from one machine to another?
yes. select the project in the project pane and export the project
in the other computer, open aperture and File>Import>Project... or Folders into Project (depending how you exported in the first place)
victor -
Every time I click on a web page an advertisement or MAC Keeper page opens up. I have pop-up blocker on. How do I make this stop?
There is no need to download anything to solve this problem.
You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Since updating to iOS 702 web pages from bookmarks freeze. How to correct this problem
See if any of these help, one is Blue Screen
Kernel Panic
http://support.apple.com/kb/TS3742
Grey Screen
http://support.apple.com/kb/TS2570
Blue Screen
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.html
Flashing Question Mark
http://support.apple.com/kb/TS1440
Safe Mode
http://support.apple.com/kb/HT1455
Reset SMC
http://support.apple.com/kb/ht3964
PRAM/NVRAM
http://support.apple.com/kb/HT1379
Hardware Test
http://support.apple.com/kb/HT1509
Maybe you are looking for
-
Using Lightroom 5.7 under Mac Yosemite, when I press Command-P to print a photo, the print preview in the upper left hand corner of the screen is always blank. Shouldn't there be a preview of the printed photo displayed?
-
IBook - Gray Screen and that's all?
Hello folks. A friend dropped off his iBook and ask if I could take a look at it - I did, he should keep it cleaner:) - now that's not nice. I turn it on, and the gray screen comes up, with the apple in the middle, along with the spinning fingers / b
-
Music writing program similar to MusicMaker
Years ago when I had my 512k Mac I used a program called MusicMaker (I think). Easy to use, no manual required, it would play written music in up to four parts, and print it on my imagewriter. I thought it was a wonderful program. So much so that I t
-
Hi guys, I have just recently had a look at a configuration and was hoping for some advice... He has, himself, installed 8 Apple TVs and is having issues connecting some of them at times. I have very quickly identified that only 5 devices can use ho
-
My iBook g4 has a kernel panic (below text). It did a '3 beeb, flash light 5 times' crash last week but then re-booted fine. About 4 months ago, this happened repeatedly and the 'power down now' error message appeared on a black screen. Finally it re