Syncing with MobilMe will change more than 50% of your Keychains....

I keep getting this message. This keeps popping up in spite of me doing the following:
Running Keychain First Aid to verify/repair any problems
Resetting Sync by having the Mac overwrite the keychains on mobileme and then having the other Mac overwrite its keychain with mobileme data
I am a bit stumped over why this keeps cropping up so often. Is it related to MobileMe?
Thanks

Yes, it's related to MobileMe (not iSync) - the MobileMe forums are here:
http://discussions.apple.com/category.jspa?categoryID=116

Similar Messages

Syncing will change more than 5% of your calendars on this computer

Hi all,
I'm new to iPhone, but very familiar with Mac. When I attempt to sync my iPhone to my calendars in iTunes I get the message that syncing "will change more than 5% of the calendars on this computer."
What's this mean?
I always hit cancel because I don't want to lose any calendar info on my Mac.
I'm attempting to sync 9 or 10 iCal calendars.
I'm sure this has been well covered in these forums, but I'm able to find my answer.
Thanks!

What's this mean?
Basically you have more or newer info on one side of the syncing devices.
Click on Details when you get this message and you'll see the entries that differ on the phone based calendars. One solution could be to set up your calendar on your computer as desired and replace the calendar info on the phone during the next sync. Click the option in the info pane/ advanced section in itunes with your phone connected.

Syncing iPhone will change more than 5% of your contacts?

Now when I try to sync my iPhone with my Mac I get the message that more than 5% of my contacts will be changed. I want to keep what's on my Mac and write that to my iPhone. How can I do this? Thanks....

What the program is telling you is that you have more than 5 for every 100 new contacts, changes within your contacts, contact deletions, etc.
It is merely giving you a "heads up" that there are more than just "a few" changes to your contacts list. It, and iCal, should follow up that page saying how many additions, changes, and deletions occurs within that 5%.
For instance, when i add 1 month of my work schedule and sync it to my iPhone, I get that message, as it is adding 30 brand new additions to my phone.
Does that make sense?
As above, the suggestion if you are really concerned for overwriting, or just totally neurotic, is appropriate - making routine backups.
Or just wait until next week for Leopard for your next sync, and Time machine will make sure you never ever delete a contact by mistake.
Good Luck

Synch will change more then 25% of your bookmarks on this computer

I'm trying to backup my ipad and when I do I get a message saying synch will change more then 25% of your bookmarks on this computer
I am trying to keep my bookmarks on icloud so my macbook my iphone and my ipad can all have the same book marks.
The only thing I've done lately is delete a folder in my bookmarks in safari on my macbook, its saying that 14230 will be deleted and 587 will be added.
Is this the result from deleteing that folder, i can't see there have been that many book marks in that one folder.
Also everytime i synch my ipad it seems that it keeps downloading the same apps all over again.
Whats the deal with this?
Frustrated TravelGuy

The only ways to avoid that issue are either to disable syncing of the iPhone's calendar, or reset the iPhone's sync data by overwriting it with the computer's data. If you do this, any new calendar items added to the iPhone since your last sync will be lost.
To reset the sync data plug in the iPhone. Open iTunes. Click the Edit menu, then Preferences, then the Devices tab, then click "reset sync history."
Http://support.apple.com/kb/ht1692

Syncing will change more than 25% of contacts, to add "display type"?

Hi all.
Suddenly I'm getting this warning on a phone I've synced numerous times before. The warning shows that 145 contacts will change on the computer, and the only change is that "Display type" will change from <empty> to "Person".
I suppose this happened with an iTunes update, and Apple decided that it wasn't permissible to have this field empty.

The only ways to avoid that issue are either to disable syncing of the iPhone's calendar, or reset the iPhone's sync data by overwriting it with the computer's data. If you do this, any new calendar items added to the iPhone since your last sync will be lost.
To reset the sync data plug in the iPhone. Open iTunes. Click the Edit menu, then Preferences, then the Devices tab, then click "reset sync history."
Http://support.apple.com/kb/ht1692

Sync Alert - Change more than 5%

Hi all,
I am currently syncing between a MacBook Pro, a PowerBook G4 and a Sony Ericsson cell phone. Quite often on the laptops, I receive the error that states, "more than 5% of your calendar/contacts will be changed... are you sure you want to sync?" In most cases, only 1 or 2 items are being changed, yet I have hundreds of contacts and many more calendar items. In other words, much less than 5% of my items are being changed.
This become more than a minor frustration when one of my laptops is stuck on this warning, which prevents my other laptop from syncing. I don't always have the other laptop with me, so at that point, iSync is dead in the water.
Is there a problem here, or a way to change this warning? What might be going on?
Thanks,
-Keith

One of your free-standing computers being 'stuck' with this notice in the foreground will not prevent the remainder of your synchronization pool from interacting, and has nothing at all to do with iSync. iSync is simply the client responsible for interchanging data between supported mobile handsets, smartphones and Palm organizers and the Address Book and iCal applications. Nothing more.
It may be that the truth database on board one of your laptops is corrupted or outdated, or has become non-responsive to synchronization requests from other clients through .Mac Sync or a similar conduit. To deal with this, you should determine which of the machines is more likely the problematic one, and reset the framework using iSync on that machine. To do so, launch iSync, open the Preferences… dialog, press the Reset Sync History… button and follow any instructions which appear.
Once completed, synchronize—which will initiate a first time, slow synchronization and merge all client data, then synchronize again upon completion of that process, about five minutes after the first task has been completed. That should provide sufficient time to trigger other events across .Mac Sync or similar conduits, though your chosen interval determines the likely actual period of time you must wait until synchronization returns to normal.
You can also adjust the threshold which triggers this message in iSync in the same Preferences… dialog. But, choose your warning level carefully, and only after you have performed the reset.

How come free memory will be more than physical memory?

Hello Guruz,
Interesting, I installed one zone with 1Gb dedicated memory, But when I type top command I am getting o/p as below.
Memory: 1024M phys mem, 1972M free mem
How come free memory will be more than physical memory?
If that so, how can we get exact memory utilization on non-global zones.
Thanks in advance.
Thanks & Regards
Prakash K
Off: +91 2022970906

Hi Prakash,
Please run the following command on the Global Zone and Non - Global Zone and upload the output.
# prtconf |grep -i memory
SK

Can I change more than one photo from color to black and white at one time?

can I change more than one photo from color to black and white at one time?

Check out iPhoto Batch Enhancer
http://www.feroxsoft.com/ibe/index.php.en
Regards
TD

Can windows 7 'open with' right click open more than 1 picture at a time?

A few times I have been given a usb drive or SD card & asked to enhance a few pictures for someone. I usually just select one picture & then right click open wirh & select PSE. The problem with doing this is that I can only send one picture at a time to PSE. Is it possible to get the open with command to have more than 1 picture open? I'm using windows 7 pro.

Hi,
You could try using the "Send To" option but you first have to create a shortcut.
Use the windows explorer to navigate to
C:\Users\"Your User Name"\AppData\Roaming\Microsoft\Windows\SendTo
In that folder create a new shortcut to the PSE editor.
Then you use it by selecting the images you want to process, right click and select Send To - the editor should appear in the list.
Hope that helps
Brian

Syncing my iPad is taking more than 36 hours... how do I speed this upso I can update my iOS?

syncing my iPad is taking more than 36 hours... how do I speed this up so I can update my iOS?

Try restarting the iPad. Disconnect the iPad first.
Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
Restart your PC.
Try again.

My old iphone backup date of 1/15/12 on itunes seems out of date. I just synced it before I am going to initiate my new iphone 5 from the Mac that I just synced with. Will it pull the recently synced info or the 1/15/12 data?

My old iphone backup date of 1/15/12 on itunes seems out of date. I just synced it before I am going to initiate my new iphone 5 from the Mac that I just synced with. Will it pull the recently synced info or the 1/15/12 data?

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!!

Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for the first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!! MY IPHONE IS STILL STUCK.

I can't, look at this image

My iPod Nano will not sync ratings to iTunes if more than one playlist is played

When I try to sync my iPod back to my computer it will only take song ratings I've changed if I only played music with one playlist. If I've played more than one it doesn't transfer them and just acts if they never existed. Why is this?

If you honestly did not damage the iPod, the broken screen should be covered under warranty. Do you live near an Apple Store?
JC

I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb. The problem I'm having is that it will not more than about 5.4gb worth of songs. The iPod begins to freeze mid sync and the (-69) error message haults the sync.

I had an iPod Classic 5th Gen that I upgraded from 30gb to 80gb. The problem I'm having is that it will not sync more than about 5.4gb worth of songs. The iPod begins to freeze mid sync and the (-69) error message haults the sync process. The hard drive has been upgraded, it has a new logicboard (with 128mb RAM), new housing, battery, hold / headphone jack. Basically the only original parts are the bezel, click wheel, screen, and data ribbons. Have attempted the 3Rs and have also tried to isolate potentially corrupt audio files and remove them, but this did not seem to be the primary cause. The sync failure consistently happens at just under a 1000 songs (5.4gb) and then it starts to error (-69) any song after that. Your advise would be enthusiastically received.

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Problem with image control using more than 1 web cam

Hi,
I am using logitech quickcam pro 4000.Actually I want to get image from
3 web cam at a time wich will act as a CCTV.I want to get picture from
more than 1 web cam at a time.But,When I start the .vi,than I get image
from 1 web cam.I have attached the vi and the demonstration file.
If anyone has any idea please send me a reply.
(The code was constructed using information
from the Logitech Software Development Kit, downloaded from the Logitech web
site January 4th 2004. This
package includes the royalty free distribution with the camera driver.
To install the package, download and unzip
LabVIEW Logitech UWA.zip and run Setup.exe in the 'redist' folder. This installs drivers (if not already
installed). Then run LabVIEW and open
Logitech Image Acquisition Master.vi.
Click the LabVIEW run button.
Notes for Understanding the Code
[1] The camera is controlled by an Active-X
reference from a front panel Acitve-X container that displays the pre-view
image. To create this, create a blank
Active-X container on the front panel and select the Active-X Hydra Video
Portal class.
[2] Three methods are called, following the
Visual Basic guide from Logitech. The
first establishes a connection to the Active-X server. The status bar is activated in the preview
window (EnableUIElements), and we connect a camera (ConnectCamera2).
[3] Here we set the value of property
'EnablePreview' to turn on the preview panel.
[4] We can get the camera description for
camera zero here (the first camera connected).
[5] Here we select the video format (64x480
– can change it later). The next call
establishes the preview size by setting property values. The preview size should be the same as the
video format for fastest image acquisition.
[6] We are restricted to saving the picture
to a BMP file and then reading it in again.
This is a limitation of the SDK.
After reading the image file we can change it to a JPG if we wish to.
[7] Here we re-read the image file and
provide it to ImageDisplay.vi.
Other methods and property values are
reasonably self evident. In LabVIEW, if
you right click the Active-X reference terminal on any method, you can create a
new method by simply selecting the appropriate one from a list. The parameters for the method appear
automatically and should be reasonably self-evident from the names. If you want more details, download the SDK
from Logitech.
Other methods allow you to make movies in
real-time or time-lapse sequences.
Note that you can also monitor Active-X
events to detect inputs or parameter changes made elsewhere. For example it is possible to detect when
the button on the camera is pressed.)
Thanks
Kabir
Kabir mamun
PhD Student,DCU
[email protected]
www.iward2010.blogspot.com
Attachments:
Logitech Image Acquisition Master.vi ‏98 KB

Hi Peter,
Thanks for your e-mail.And sorry for late.
I have changed my activex server in my labview programme.Current
server name is XVideoOCX.I have attached 1 example.Still I am facing
the same problem that I am not getting disply from more than 1 web
cam.So would you be able to advice me,what should I do regarding this
matter.
Actually,This is a part of my M.Sc project.I am under pressure.Peter,Please do me this fevour.
Thanks
Kabir
1 eample from help file:
Video Disply
1. Choose the input mode (Video, Single Image Files, Screen, etc.)
XSetInputMode(0) // This
chooses video as input
2. Choose the video device
XSetVideoInput(0) //
Choose the first available video input device
3. Initialize XVideoOCX
XInit() // Initialize
XVideoOCX
4. Start internal video capture
XStart()
now XVideoOCX should display the live video
5. Stop internal video capture
XStop()
6. Close XVideoOCX
XClose()
Kabir mamun
PhD Student,DCU
[email protected]
www.iward2010.blogspot.com
Attachments:
ax2.vi ‏23 KB

Syncing with MobilMe will change more than 50% of your Keychains....

Similar Messages

Maybe you are looking for