SyncMate vs. FoneLink for syncing Nokia E50 notes with Mac Mail

Hello,
After some searching, it appears that there are two programs that would sync my Nokia E50 notes with Mac Mail on my MacBook Pro - SyncMate and FoneLink. Both are priced at about $50 - a bit spendy. Has anybody use / compared the two? Are there other options?
Thanks,
-Dima

Hello,
After some searching, it appears that there are two programs that would sync my Nokia E50 notes with Mac Mail on my MacBook Pro - SyncMate and FoneLink. Both are priced at about $50 - a bit spendy. Has anybody use / compared the two? Are there other options?
Thanks,
-Dima

Similar Messages

  • Sync iPod 2G notes with mac?

    I have a new Macbook, and I often take notes on my old iPod 2G. So I tried to find a way to sync my iPod notes with my Mac notes application.
    But there is no function for this in iTunes and I heard that you can only sync with the Mac notes app with iClud. The problem is, tht my iPod is not iCloud compatible, any ideas?
    Pls help me

    It is Mac OS 10.8.3 and of course I read the information provided by Apple. Unfortunately, Apple has forgotten their users with older devices. The information provided are not applicable for iOS 4.2.1. There aren't any switches to activate note syncing. What now? I urgently need my notes and emailing is not the solution.

  • When I sync ical on iphone with mac, every entry is multiplied.  What are the settings for syncing without repeats?

    When I sync ical on iphone with mac, every entry is multiplied.  What are the settings for syncing without repeats?

    If your wireless environment is less than ideal, as it is in most inhabited areas, the influence of other wireless networks and devices competing for the same very small portion of the electromagnetic spectrum will affect your network's performance. Your own wireless network is a microcosm of that environment.
    To mitigate the effects of competing wireless networks, use 5 GHz to the maximum practicable extent. It is comparatively free from interference contributed by other wireless devices and is likely to remain that way for some time. However, it is less tolerant of intervening obstructions and construction materials than the 2.4 GHz spectrum, so it's not a panacea. Every installation is different so you must experiment to determine the optimum configuration.
    Place your wireless router (what kind is it?) in a central location, convenient to all the devices that require it. Most of the time a utility or ISP will locate it in some remote corner next to the utility service entrance. That is almost always the worst possible location.
    Others find that only a direct wired Ethernet connection between router and devices will maintain uninterrupted access to Airplay.
    That is almost certain to result in the best possible AirPlay performance. Short of having everything hard wired (it's not an option for the iPad for example) use an Ethernet connection for all the devices that lend themselves to that method. Your AppleTV is certainly one of them, since its location is not likely to change very often. Your AirPort Express should be another, since your audio systems are likely to stay put as well. Connect them both to your existing router, either directly or through an inexpensive Ethernet switch. Your problems are likely to be solved with just those two connections.

  • How can I sync my Outlook Notes with my iPad

    Does any one can help me with How can I sync my Outlook Notes with my iPad
    Thx

    Here are some docs from MS:
    http://office.microsoft.com/en-us/outlook-help/synchronize-outlook-and-apple-iph one-or-ipod-touch-calendars-HA010266829.aspx
    http://office.microsoft.com/en-us/outlook-help/synchronize-outlook-and-apple-iph one-or-ipod-touch-contacts-HA010266802.aspx

  • BB does sync media with PC but not with Mac

    my BB does sync media with PC but not with Mac. At my Mac I got 'Insert media card'. How can this be solved as PC is no problem?

    I got the Bold 9790. I am not sure which OS, does that matter? Are there OS versions not compatible?

  • How can I sync my phone notes with my iPad

    how can I sync my phone notes with my iPad

    Notes in your iPhone "Notes" app? Do you have the same iCloud account signed onto both devices? If so, go to Settings>iCloud and turn on the "Notes" option.
    Cheers,
    GB

  • Need Some Help...I cannot sync my hold "notes" with iCloud. only the new one appears on iCloud!

    Need Some Help...I cannot sync my hold "notes" with iCloud. only the new one appears on iCloud!

    i'm using an iphone4

  • Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"

    Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"
    What are the correct mail account settings and more importantly the correct DNS settings
    Thank you for any help you may be able to provide
    Cheers
    Chris (iMac i7)

    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
              •          Server name: imap.mail.me.com
              •          SSL Required: Yes
              •          Port: 993
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    SMTP (outgoing mail server) information:
              •          Server name: smtp.mail.me.com
              •          SSL Required: Yes
              •          Port: 587
              •          SMTP Authentication Required: Yes
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

    Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

    Hi ron1098,
    Try my application Dates to iCal. it runs on the Mac, but you can sync the calendar to your iOS device.
    See more about Dates to iCal here. It is £4 shareware with a 2 week demo.
    Best wishes
    John M
    As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • I can no longer send emails from my mac yahoo business account, but can send them directly from yahoo. just not from mac mail. I've been able to send emails perfectly fine until today. Help!

    I can no longer send emails from my mac yahoo business account, but can send them directly from yahoo. just not from mac mail. I've been able to send emails perfectly fine until today. I've been on the phone with yahoo mail and they've verified that my account settings are correct and I can send email from yahoo. I can receive emails via Mac mail, but just can't send them. An error message appears that says:
    "Sending the message content to the server failed." I can't send emails from my Mac desktop, iphone or ipad. Any suggestions! Help! I'm a Mac rookie and so frustrated! Thanks.

    Please read and begin using Can receive email, but not send email. I had a similar issue with Comcast mail (could receive by not send) and found my answer in this letter. For me it took resetting the outgoing mail and telling the system to use a password when sending outgoing mail. If you need help with that please advise and I'll tell you where to look. 

  • I am using a mac mini (10.8.3) with Mac Mail 6.3 (1503).  Whenever I try to forward an email with attachments, the attachments do not make it.  They show being sent, but the attachments never are sent.

    Hey Guys,
    The title says it all.  Whenever I receive an email with attachments, I will try to forward the email to someone with the attachments.  Mac Mail shows that the attachments are attached, but the receiver says the attachments are not there. Our mail host is Rackspace.  We are setup with IMAP.  It should be noted that we are experiencing similar issues with OS 10.5.8 with Mac Mail 3.6 (936).
    We assumed Rackspace was the problem, so we logged into their webmail portal and tested it and the attachments were received as normal, which points everything back to Mac Mail.  We even had an ISP change but the problem do not change.
    I have researched the problem, and there seems to be evidence of this being a known bug with Mac Mail, but I am hoping there is a workaround.  The company is unwilling to move to a different mail client since they use Daylite 4, which does not support Thunderbird.

    Back up all data.
    1. Triple-click the line below to select it:
    ~/Library/Mail/Bundles
    Right-click or control-click the highlighted line and select
    Services ▹ Open
    from the contextual menu. A folder may open, or you may get an error message that the item can't be found. Either result is normal. If the folder does open and has contents, move the contents to the Desktop. Relaunch Mail and test. If there's no change, put the contents of the folder back and quit Mail again.
    2. Repeat with this line:
    /Library/Mail/Bundles
    This time you may be prompted for your login password when you remove the items. Make sure they're removed from the folder and not just copied to the Desktop. If necessary, copy them first and then move the originals to the Trash.

  • Suddenly can not access .mac mail from Apple Mail

    Suddenly, I can not access .mac mail from Apple Mail (Version 2.1.1 (752.3)).
    For quite a few years I have been using Apple Mail to access my .mac email. As of last Friday, Mail stopped working. Nothing has changed (accept for the installation of the latest OS X security upgrade - SecUpd2006-008Univ.pkg).
    I can still access my .mac mail through the .mac web browser and I can still access it through SnapperMail on my Palm Treo 680. But, when I open Apple Mail on my MacBook, it does not do anything, just sits there. When I open the Activity Viewer window, 3 activities are going on:
    1. Opening Mailbox
    2. Synchronizing with Server (Connecting to...)
    3. Synchronizing with Server (Synchronizing with...)
    After a few minutes, the error triangle appears next to the Inbox and .Mac logos on the left hand panel.
    I have tried Apple Mail from several locations (different ISP / WiFi / LAN) over several days but get the same problem.
    Does anyone have ideas for a solution?
    Regards
    Peter

    Let’s first make sure that the update is installed properly, and post back with your observations when done.
    Verify/repair the startup disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what's it all about?
    After having fixed all filesystem issues, if any, reinstall the update that appears to not have been installed properly. You may also need to reinstall the Combo Update for the type of computer and the version of Mac OS X you’re using, unless this is the version of Mac OS X that came with your computer:
    About the Mac OS X 10.4.8 Combo Update
    Mac OS X 10.4.8 Combo Update for PPC
    Mac OS X 10.4.8 Combo Update for Intel
    Take a look at the following articles for guidelines on how to properly install system updates:
    Troubleshooting installation and software updates
    Installing software updates
    Basically, you should verify/repair the startup disk before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

  • Can manually subscribe with Windows but not with Mac

    For some reason I am able to manually subscribe to the below feed just fine with iTunes on my PC (Windows XP) but I get an error when trying with my iMac (OS X 10.5.8):
    *http://feeds.feedburner.com/Metalspeak*
    The error I'm getting with my iMac references "An unknown error occured (400)"
    I was troubleshooting a different feed and am getting similar results: it works fine with the PC, but not with the iMac:
    *http://feeds.feedburner.com/MetalsPeakPodcast*
    The error I'm getting on this feed however states "The file might be corrupted, or a file type that iTunes cannot play"
    Can anyone think of why these feeds work with Windows but not with Mac? Any advice is appreciated!

    The problem lies with the URLs for your media files. The one for the top episode is
    http://www.metalspeak.com/episodes/MetalsPeak 10 - GenresPeak.mp3
    This URL contains spaces, which are not allowed in a URL. Browsers - and from what you say iTunes in Windows - handles this by substituting the code %20 for each space when requesting the file; iTunes for Mac does not.
    You need either to change the filename for each media file, removing the spaces or substituting something such as an underscore, and then amending the feed accordingly: or at the least to amend the feed by replacing each space with %20.
    It's the same problem in the other feed.

  • How do I sync new i phone with mac mini????

    How do I sync new i phone with mac mini?

    Open up iTunes, then go ahead and plug in your phone to the USB port on the back of the Mini using the USB cable that came with the phone.

  • Is there a best practice for multi location server setups including mac mail server?

    Afternoon all,
    Last year I setup a client with Snow Leopard Server including hosting his mail on the server with Mac Mail Server and calendaring.  He now has plans to open other sites with the same setup, how can this be done using Mac Server?  The implementation of a new server on the new site would be straight forward my concerns / question are:
    1. How would the two servers communicate?
        a.)Do they need to communicate?
    3. How will mail across the two sites work?
        a.) How will DNS work for email internally?
        b.) How will DNS work for emai externally?
    4.  How will calendaring work across the two sites?
    Is Mac Server the best platform for moving ahead with this type of business need?
    Any help or direction would be greatly appreciated.
    Anthony

    Camelot,
    many thanks for the speedy reply.  Your comments are very helpful thank you, if I may I will give you some for information and some other questions.
    The offices will be from 5 miles to 25 miles apart, the new office and ones that follow will be considered as branches of the main office for example the company name is Sunflower and it serves area 1, then new will office will serve area 2 and so on.  So in theory I could leave the main server domain and mail mx record as sunflower and then add further servers as 2.sunflower.com, 3.sunflower.com as domains and mx records? This would then provide unique mail records and users within the organisation such as [email protected] and [email protected], which doesnt look to good I would prefer all users to be name@sunflower how can this be acheived?
    With regard to user activity in the whole users will be fixed but their will be floaters such as managers and the owners that may at times float from one office to the other and would beneift from logging into any machine and getting their profile.
    I have thought about VPN's as I have acheieved this type of setup with Microsoft server products, I have found speed issues in some cases, how can this be acheived using OS X, are there any how to docs around?  In the Microsoft setup I acheived this using netgear VPN Firewalls which ofcourse adds an overhead, can this be acheived using OS X propietary VPN software?
    So ultimatley I would prefer to have the one domain without subs "sunflower.com" and users to be able to login to their profiles from either location. The main location now will remain as headoffice and the primary location and the new will be satelites.
    I hope that covers all of your other question, again many thanks for your comments and time.
    Kind Regards
    Anthony

Maybe you are looking for

  • Create a new object that surrounds the selected objects

    Is there anyway in illustrator to create a new vector object from selected objects? IE if i have three rectangles selected, can I make a new vector path that surrounds them all. I dont mean welding a group of vectors together or offsetting a path...w

  • FDM - Import Format (Fixed Column Type - No Delimiter)

    Hello, Question on FDM. I've built an import format and successfully imported a Fixed Column type text file. Everything imports beautifully. FYI - The format of the file looks just like a Trial Balance with a column for Debits and one column for Cred

  • I cannot change iTunes library in Windows

    I cannot seem to change iTunes libraries in Windows. I have been trying the old shift trick and the dialog box won't appear. I have reinstalled and that had no effect either. Does anyone know what I'm doing wrong? Thanks

  • Multilevel Collections Basics.

    I am new to collections in general. It looks like I need a multilevel collection to hold 3 fields (three parts of a phone number). For simplicity, I assumed that I will get only 1 record from the cursor. I think I just don't know the syntax to popula

  • ODBC Disconnect Issue

    Dear All, I am using MySQL ODBC  5.1 and able to connect with my database also. Operationg system: XP embedded But in between i  found that ODBC get disconnected. can anybody will help me to sort out this issue?