Syncronization problems with Who is Who ivew

Hello
after changing user data (telephone,etc...) in LDAP (Microsfot ADS), it takes a long time After I see the data in Who is Who ivew.
I have create a index (ume index) as described SAP Documentacion.
Any body knows how can I solve this problem¿?¿
I would like syncronization between LDAP data and iview Who is who each 15 minutes iexample.
Thanks and Regards
Noemí

Hi Noemi,
the Who-is-Who iView uses TREX search functionality. Basically, TREX first crawls all specified files and stores the (indexed) results in the data base. The Who-is-Who iView works on the indexed data stored in database. To synchronize you LDAP and Who is WHo iView you have to re-index the data. You can do this manually in the Index Administration (System Administration -> System Configuration -> Knowledge Management -> Index Administration).
To change the period of time between index cycles you can define a schedule for your index. But be aware reindexing is pretty resource consuming.
Best regards,
Martin

Similar Messages

I have a problem with Incorrect payment Who Can I Turn to off this payment

I have a problem with Incorrect payment Who Can I Turn to off this payment
about receipt No.111032735561

These are the steps I performed on my own system many months ago. I could not view PDF files in Firefox with both Adobe Reader and Foxit installed.
#Close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#If you have not already done so, uninstall Adobe Reader 9.4.5 using Windows Start > Settings > Control Panel > Add or Remove Programs, click on the item, click Remove. You may need to restart your system.
#Open Foxit in your programs list Windows Start > Programs
#*on the Foxit menu, click Tools > Preferences
#*click File Associations and be sure "Display PDF in browser" is checked then click "Make Default PDF Viewer" then click OK
#*close Foxit Reader (File > Exit)
#Start Firefox
#*Open the Applications panel (Tools > Options > Applications '''''OR''''' Firefox button > Options > Options > Applications)
#*type '''pdf''' in the search box; you should see "Foxit Reader PDF document"
#*in Action column, click the down arrow at the far right end
#*choose "Use Foxit Reader plugin for Mozilla (in Firefox)'
#**if the full name does not display, place the cursor over the item to see the full name in a tooltip box
#Test on a pdf file from the internet
#*If there is no toolbar at the top of the PDF display in the tab (just a blue strip), tap the F8 key to get the Basic toolbar, or right-click the blue strip at the top to display/not display other toolbars by clicking on them (checked=display; un-checked=do not display)
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Clearing problem with a vendor who have a factor

Hello,
How can we clear vendor who have a factor, customer invoices ?
Vendor V with factor V1
Customer C without factor
There is no clearing
What is the good process?
Creation of the factor V1 as customer and to link this factor to C ???
Any solutions ?
Thanks in advance

Hello,
I will explain you in detail:
Example:
Vendor V1 have under automatic payment transaction - Alternative payee the vendor V2. And V1 have also under account control - Customer C1.
The customer C1 have under control data -> Account control - Vendor V1.
As you write me, everything seems ok for clearing between V1 and C1.
But me, i want to clear via F110 the vendor V2 (the alternative payee as defined in the V1 master record) with C1
What can i do in this case ??
Thank you in advance
Edited by: trouka on Jul 28, 2009 5:51 PM

When I copy and paste a link into the body of my email, the link won't light up in blue and underline becoming a working link. I do not have this problem with Explorer. Who do I get the link to work?

Not sure what more I need to say. If you still don't understand, let me know.

In Rich Text mode, there's an "Add a link" button (an Earth with two chain links in front of it) in the toolbar, which opens a window where you can type a web address. Yahoo! Mail then inserts it into your email as a link.

I've recently switched routers on my iMac. The set-up appeared to go well, and my incoming mail is working, but my outgoing mail is not. I spent a long time sorting out the problem with my provider, who told me the problem is on the "Apple side".

I've recently switched routers on my iMac. The set-up seemed to go well, and the incoming mail works. The outgoing mail is the issue - it sits in the outbox buffering and doesn't send. After several calls to my service provider they decided the issue was on the "Apple side" since my internet connection seemed to be working fine, and all input information was correct - ports selected, etc. Any ideas what to try next?

Open Keychain in Utilites and delete all the "outgoing" entries (will probably be smtp.<your ISP name>.net). Then go into Mail Preferences>Accounts, clear out any passwords for the outgoing. Can't say exactly where this is or what this looks like in 10.7, since I'm running 10.6. Then enter new (EDIT: or can be the same old ones) passwords, or password. Allow Keychain to save those new ones.
FWIW, here's what this looks like in mine.

Preparation failed in trex when using standard Who's who iview

Hi,
I have encountered a problem with the standard Who's who iview, which makes a simple search in the ume impossible.
All users "preparation fails" with the following error from Trex monitor > Display queue entries:
Document ID: /ume/users/USER.PRIVATE_DATASOURCE.un%3Ar5mas.usr, Return Code: 16040, Return Message: SSL: rc=-40 pse_error, Document Status: Prepration failed, Action: Index, Retry Count: 3.
I'm working on Netweaver '04, stack 9, installed from rapid installer.
Any help is greatly appreciated.
Regards,
Martin
Message was edited by: Martin Søgaard

Just in case anyone happens to stumble across this thread via search, the error 16040 means that your user doesn't have permission to read the PSE it's trying to open. You'll get errors like this in one of your trace files:
[Thr 1224] =================================================
[Thr 1224] = SSL Initialization on PC with Windows NT
[Thr 1224] =   (710_REL,Jul 15 2010,mt,ascii,SAP_UC/size_t/void* = 8/64/64)
[Thr 1224] =   found SAPCRYPTOLIB 5.5.5C pl36 (Jul 3 2013) MT,[aesni],NB
[Thr 1224] =   current UserID: SAPDOMAIN\SAPServiceSID
[Thr 1224] =   found SECUDIR environment variable
[Thr 1224] =   using SECUDIR=E:\usr\sap\SID\TRX00\sec
[Thr 1224] *** ERROR =>   secudessl_Create_SSL_CTX(): PSE "SAPSSLS.pse" not found! [ssslsecu.c   1354]
[Thr 1224] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
[Thr 1224]   secude_error 1281 (0x00000501) = "open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned"
[Thr 1224] >> ---------- Begin of Secude-SSL Errorstack ---------- >>
[Thr 1224] ERROR in SSL_CTX_set_default_pse_by_name: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in ssl_set_pse: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in af_open: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in secsw_open: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in secsw_open_pse_or_extension: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in sec_get_PSEtype: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in aux_read_PSEFile: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] ERROR in aux_file2OctetString: (1281/0x0501) open("E:\usr\sap\SID\TRX00\sec\SAPSSLS.pse") returned : "Permission denied"
[Thr 1224] << ---------- End of Secude-SSL Errorstack ----------
[Thr 1224] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
        for "SAPSSLS.pse" [ssslxxi.c    2278]
[Thr 1224] *** ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 1224] =================================================

Who is Who query

Hi experts!
I have a problem with the query "Who's Who' in ESS. I modified the infoset and added two additional fields. I want those fields to appear in the selection screen and appear ok but when I run the query ignores the values I put in those fields. No filters for the values that I stick.
Any ideas?
Thank you very much!

Hi,
Have a look at the below document.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/108c31e7-b6a7-2d10-3692-c1a9f7a5c4dc?QuickLink=index&overridelayout=true
Cheers-
Pramod

Problem with distortion with DAQ Generating Sine wave

Hello,
I have a little problem with my VI who is made for driving a biphased stepper motor:
When I change dynamically the output frequency of my DAQ Generaor, I have some weird effect (see picture). It happend progressivelly like this :
(the start frequency doesn't matter)
95Hz - nothing
95-100Hz progressivelly grow
100Hz :
100-105 Hz degressive
105Hz - nothing
So I generate 2 phases with a rate of 1M and 100k for sampling. All other stuff are set with the same settings.
My device is an NI USB-6356 (1.25MS/s/chanel)
I have tried to set all things at 100k but when I do that my motor won't turn.
Does anyone know why it does this ?
Thank you in advance
Attachments:
Sub_Mesure1.vi ‏238 KB

Hello Mike,
I use 2 simulate signal setting in sine : see Capture2.png
and both DAQ Gen and Acq : Capture3.png / Capture4.png
Attachments:
Capture2.PNG ‏39 KB
Capture3.PNG ‏70 KB
Capture4.PNG ‏73 KB

I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it. Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloade

I have an older version of Adobe Digital Editions (around 3 years old) and was very happy with it.
Then I had problems with my Kobo Reader and asked a friend who works in IT to assist. She could not fix the Kobo but she messed up my Addobe. She downloaded version three and I have an account and a password - was not able to transfer my books from my reader to version three (and I don't like the lay-out - I would prefer to stay with the old version as I also loose all my download date info..)
But all the books I have bought over the last three years are in the old Adobe Digital and I cannot access them any more. When I use it I get the message "that the document is licensed to a different account. I can't even open the books on my computer.
When I go to my Kobo library, I cannot also not open my books and get the message "this doc is protected by adobe digital rights management and is not currently authorized for use with your adobe. please sign in with your authorized adobe id and try again"
I believe the problem is that I do not seem to have a digital id for my old adobe or that the Kobo is not in sync with it anymore.
can you please help me - going on vacation in three days and cannot go without books.

Please authorize ADE 3 with same credentials that you used with older version of ADE

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC' so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or Tip

In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC' so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or some Tips.I have already tried many things to iTunes and my PC like trying to restore my PC but that do anything.Also,would it be fine if i contacted (call) Apple Support? Please,I need help because what I think is wrong is my PC,iPhone,or USB might be messed up so if anyone could help me with this,it would be really helpful and for anyone to be nice enough to help me.

I think this article will help you.

Is there anyone who doesn't have any problem with Z3 ?

I'm thinking to buy this phone, so I want to know is there anyone who has no problems with it, because in this and other forums, I find a lot of discouraged people who have a wide variety of problems.
Thanks a lot

uliwooly wrote:
Think about it, this is a Support forum. users who have issues come looking for help, it doesn't mean that the majority have issues.
I understand what you're saying, but this is my dilemma:
I currently have sony Xperia Z1 compact which is full of small problems.
-back panel rattle when I touch it near camera lens
-a big gap between the panels and the frame
-camera freeze and need to restart the phone very often
-calendar widget does not eject notification and birthdays...
I was looking for a solution to these problems on the forum for the Z1 compact, but so far I have not solved a single.
Such problems I have never had on my samsung phones. Still, I'm determined to buy a Z3 because of the design and premium materials, but if I compare it with My Z1 Compact, I'm a little scared.

Is there anyone who is not having a problem with their Fascinate?

Just ordered the Fascinate for a penny from Amazon. Looks like that's all it's worth! LOL. Is there anyone who has not had problems with this phone! I have not received mine yet, maybe I'll be one of the lucky ones.
Should I do the update or stick with 2.1? Do I have a choice?

2.2.1 is Froyo. The phone originally shipped with 2.1 Eclair. What is your Build number? I'm assuming it is not the ED04 (which you should avoid at all costs) since you were prompted to update.
Edit: Also, I don't know if it works the same way on the Fascinate, but on the Droid X (running unrooted stock software) you could only postpone the update for a certain period of time and then it would force the update without your approval. Broke a lot of people's X's that were previously running fine. Hope that doesn't happen to you but just letting you know it's possible.

I have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending

i have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
Also the mail is acting very funny by not getting the rules work in a proper method. Is ther a software to repair mail.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

Problem with who's who service in portal

Hi Experts,
I have created the SAP_R3_HumanResources and SAP_R3_HumanResources_Metadata Jco destinationations and the Test connection was successful.
I have created the system alias SAP_R3_HumanResources in the portal and connection for this also successful.
When i click on the who's who iview in portal i.e Content Admin--> Content provided by SAP -->End user content--> Employee Self Services -->iviews-->Employee Search -->Who's who i am getting the same exception like before
Can you please help me what else i need to check??
Regards,
Mahesh

Hi Mahesh!
Thanks a lot for your help...
>Check this link which helped me to fix the same issue.
I checked this link already but honestly I have to say that I didn´t understand the solution:
>Metadata you have to mention the user name and password.
>Model data it should be logon ticket, you should not maintain user ID and password. If you maintain , it will >always try to fetch this user id data. In you case this is the problem
>And i want to confirm wheather you created all the required Jco's in the webdynpro content admin in >portal??
I have the problem with the service "absence management".
This service needs the following JCos:
SAP_R3_HumanResources and
SAP_R3_HumanResources_MetaData.
This JCos were already there but I had to change them. The HR backend was moved to an external provider and therefore we could´nt use SSO anymore. So I have put a technical user like your EP_ADMIN in both JCos and both are working in test mode.
But the problem is then that the service runs with the technical user and not with the portal user!!!
And yes, all our portal users are mapped to the personal number in transaction PA30.
Thanks everybody for any help...
Peter

Syncronization problems with Who is Who ivew

Similar Messages

Maybe you are looking for