Syncs changes to my Touch even without any changes in iTunes

Recently, everytime I connect my 32G Touch to my Macbook, it updates around 350 songs even if I have not made any changes to my iTunes library or Touch. I can even let it finish updating the 350 songs and disconnect then reconnect and it doest it again. Any idea what might be causing this?

Mine has also been doing this for several weeks. Might have happened with an iTunes software update? Every time I sync, the same 99 songs out of my library re-sync to my iPod Touch even though nothing about them has changed. Nothing. it's freaking annoying.

Similar Messages

  • Hi all, complete novice to this so step by step answers much appreciated please. thank you. Ibooks app showing in my itunes apps but wont sync with my ipod touch - have tried deleting app in itunes then re-downloading but still wont sync, any ideas please

    hi all, complete novice to this so step by step answers much appreciated please. thank you. Ibooks app showing in my itunes apps but wont sync with my ipod touch - have tried deleting app in itunes then re-downloading but still wont sync, any ideas please?

    See if this helps
    iBooks: Viewing, syncing, saving, and printing PDFs on iPhone, iPad, and iPod touch

  • Why won't my album artwork sync to my iPod Touch but it shows up on iTunes?

    Why won't my album artwork sync to my iPod Touch but it shows up on iTunes?

    Ok I had this problem, and for me at least what happened was that not all the album artwork was attached to all songs on the album.  So if you right click one of the albums you are having an issue with, the click artwork tab, and go through each song on the album, if it is missing from any of them it will not sync properly to any device.  Find the songs that have the artwork, and then right click to copy it, then go to songs without it, and right click in the blank box and paste it in there.  Then once finished with any issues you are having sync iPod, this should fix the problem.  It worked for me, and it was unbelievably frustrating to know I have the artwork, but it wasn't showing up anywhere on the iPod.  Hopefully this fixes the issue for you, like it did for me!

  • Someone tell me how I can sync my music to my iPhone without it saying on itunes "set up as a new iPhone" or "restore from the backup of: iPod"

    someone tell me how I can sync my music to my iPhone without it saying on itunes "set up as a new iPhone" or "restore from the backup of: iPod"

    You must be trying to sync it with a different computer than the one it used last. No, there is no other way to do this.
    The iPhone may be synced to one and only one computer at any given time. If you choose to sync it to another, you can do that as often as you wish, but its content is erased first.

  • ADF Task Flow Binding - Refresh ifNeeded being invoked even WITHOUT any Parameter change

    Using JDeveloper 11.1.1.6.0
    Issue: Task Flow Binding property "refresh = ifNeeded" seems to be triggered even without the mutation of the input parameter.
    As per definition, "ifNeeded: refresh the ADF Region if the value of a task flow binding parameter changes." (Reference: 17.5 Refreshing an ADF Region)
    Now for the setup which reproduces the issue.
    I'll focus at the fragment bounded task flow level and will skip the jspx side.
    taskflow: main-flow.xml
    contains a single fragment mainFgmt.jsff
    has a managed bean defined SampleBean.java as pageFlow scope.
    taskflow: sub-flow.xml
    contains a single fragment subFgmt.jsff
    has an inputParameter SampleBean.java (because it is an input parameter, by default it will be at pageFlow scope)
    !important - has a nested taskflow (task flow call as defined in the component pallete) called inner-flow (see below)
    the nested taskflow is the default activity
    the nested taskflow has an outcome pointing to subFgmt where outcome = "return"
    taskflow: inner-flow.xml
    contains a single fragment called stop.jsff
    has a return activity without outcome = "return"
    stop.jsff has a navigation pointing to the outcome.
    Finally mainFgmt.jsff has a task flow binding (pageDef)
    with id = "sub-flow.xml"
    refresh = "ifNeeded"
    parameter SampleBean being submitted as sub-flow's input parameter. (id=sampleBean, value=#{pageFlowScope.mainSampleBean})
    Assume that code compiles.
    In this scenario where the only tricky condition is the inner nesting (defined by !important), when the inner nesting decides to invoke its outcome to visit sub-flow's fragment, mainFgmt is restarting its taskflow which makes sub-flow start over again.
    Another way of saying it is, if sub-flow starts a nested activity and that nested activity exits out to utilize sub-flow's view. The high level definition which is mainFgmt's refresh ifNeeded is restarting sub-flow.
    In the above example if you notice, the bean (SampleBean) is not really being utilized except that it is completing the purpose of refresh=ifNeeded. This scenario is only to simplify the setup - in practical use this bean will be mutated to be utilized as a refresh mechanism.
    Now interestingly, if I change the pattern a bit then the issue will not happen:
    Don't use the nested taskflow (inner-flow) as the default activity, let a fragment of sub-flow hold the initial view.
    Navigate to the nested flow.
    Exit nested flow.
    Everything works.
    Now in this scenario, it seems like the sub-flow needs to have a view established first for it to be properly be used.
    So my questions are as follows:
    Can I consider the behavior of the refresh=ifNeeded as a bug in this usecase?
    Would it be better to utilize a different way of refreshing (maybe combination of refresh condition) to get around the issue?
    Is the use of the task flow as defined logical or does it cross any boundary or best practice that might be causing this behavior?

    Hi,
    actually you lost me in your description due to complexity. I lived under assumption that sub-flow already is a region on a view in main flow, but then you sad that
    "!important - has a nested taskflow (task flow call as defined in the component pallete) called inner-flow (see below)"
    which then confused me as to I have no idea if inner flow now is the second level nesting or first level nesting (should be second level nesting). If sub-flow is a region then having "has an inputParameter SampleBean.java (because it is an input parameter, by default it will be at pageFlow scope)"  is an unnecessary broad scope because the region wont live longer than view scope.
    Anyway, it seems that a region refresh is triggered by the lifecycle involved, which can be by design or a bug. I suggest you file a Service Request with support and provide a test case as purely from the description, its hard to parse and understand what is going on.
    Frank

  • ITunes won't sync apps to iPod Touch(never used the iPod with iTunes before)

    So,I have an iPod Touch 4g on 5.1.1,and when i try to sync apps,iTunes just says "Preparing apps to sync" and after 1 second it disseapear.I use m y other 6.1.3 iPod Touch with that iTunes,and I never used to 5.1.1 one before,so is that what is causing the issue?
    Oh and,they both have been signed in with diffirent Apple ID's on their App Store apps,so is this the problem?
    iPod Touch 4g iOS 5.1.1,iTunes 11.0.4.4

    Have you updated iTunes?

  • Can I move pictures to my ipod Touch even without Adobe Photoshop?

    What file format for pictures does the touch support?
    Thanks

    Yes, you can sync to any folder on your HDD, just select it in the Photos tab of the IPT within iTunes. Supported formats include JPG , JPEG, BMP, GIF, TIF, TIFF, PSD, SGI, and PNG. From a Mac, some additional formats are supported. See this page:
    http://docs.info.apple.com/article.html?artnum=300241
    Hope this helps...

  • Keithely 6487 showing output current limit reached even without any voltage applied ...

    I am using two keithley 6487 through labview to scan the voltage for an
    ion beam deflector. recently one of them started showing cmpl on the
    front panel ocomp also flashes. all the probes i opened and run it
    through frontpanel. still the problem persists. tried to update the
    firmware and it failed to complete updating .
    can any one give any clue why this happens. the interlock connector is proper.
    this
    is not a question directly linked with labview but i could not find any
    other active forum to post the problem. i apologise.
    pls help me to recover it.
    thanking you
    ranjini

    Hi ranjini,
    If your device failed during a firmware update, it probably is not in a operable state. I recommend contacting the manufacture to see if they have methods of recovering from a failed firmware update.
    Did you receive an error when the upgrade failed?
    Here is some information from the manufacturer website:
    Known Issues:
    When using RS-232 interface, The user may get a timeout error
    at 99% (after instrument resets):
    "Timeout Error: Error In Programming Model mmmm!".
    This error can be safely ignored.
    http://www.keithley.com/support/data?asset=13399
    Sappster

  • Because horizontal scroll bar appears on the Muse, even without any evidence beyond the scope of the

    Whenever I create a layout when I view appears the horizontal scroll bar, but nothing beyond the margin, is this normal or a bug Standing Muse? Is how to fix this? Thank you.

    Actually I would like to create a site with 100% width, but when I put the slide appears the horizontal scroll bar, sometimes it happens before putting the slide. I'm doing the rectangles 100% with the rectangle tool. Way to go, or am I doing wrong? Thank you.

  • IPhone movie sync changed in iTunes

    Earlier, itunes hung and had to be forced down at activity monitor.
    It couldn't see iPhone attached as well.
    Earlier I converted short clips of Divx to .m4v / which are Mpeg-4.
    Send them to iTunes, then it's needed to covert to iPhone.
    That process seemed to go Ok, Sorta,,,, there was a beach ball involved at times.
    Gees, if it beach ball's with this machine, what's it like for a single processor machine.
    When it was time to sync these clips to iPhone, iPhone did not reply as usual, and iTunes hung solid. But I was able to select all clips wanted at will just after these clips converted.
    Maybe I should have selected one at a time, vs 6.
    Now do restart complete, make copies of Apple shut down reports and send those off.
    Start iTunes. attach iPhone, go to movies.
    Now, I can't select anything in the movie list or get the list to even move.
    The box is unchecked at Sync Movies.
    I don't recall what the status was prior, if the box was checked or not.
    But if you now try to check the box, then this warning comes up.
    What the heck is the right thing to do here?
    I don't know if I want to let it do what it intends to.
    It sounds to intense.
    This is the warning you get/
    Are you sure you want to sync movies?
    All existing songs, movies and Tv shows on the iPhone will be removed and replaced with movies from your iTune library.
    The iPhone still has the video's from before, and during the present attempted sync are left in place.

    Philscbx wrote:
    The box is unchecked at Sync Movies.
    I don't recall what the status was prior, if the box was checked or not.
    *Some how during the hung process with iTunes, the box showed up unchecked when iTunes was restarted.*
    But if you now try to check the box,
    I don't know if I want to let it do what it intends to.
    It sounds too intense.
    This is the warning you get/ *And you have to agree or no more movies*
    Are you sure you want to sync movies?
    All existing songs, movies and Tv shows on the iPhone will be removed and replaced with movies from your iTune library.
    The iPhone still has the video's inplace from before, and They were not removed during a current sync even though the movie sync box was unchecked.
    * I gave up waiting for any advice, So I grabbed the evil beast by the horns, and let it do what it warned about.
    I was now able to check the MOVIE SYNC box, and now able to scroll through the movie list that was locked out and select the converted to iPhone movies I wanted.
    The Sync completed, and it did remove my playlist of tunes.
    So I'll have to redo that part.
    +*This is totally ridiculous to wipe out 500 tunes.*+
    Ay least the movies of F1 racing converted look great on the iPhone.
    I was ready to give up and go back to the set that worked flawless, the 6 month old BB Curve.
    Message was edited by: Philscbx

  • Can I sync both my ipod Touch and iphone to the same itunes account.

    I have an ipod touch and ipod classic that both sync to the same itunes account, and I'm thinking of getting an iphone. Will I be able to use the same apps on the iphone and ipod touch?

    Hello and Welcome to Apple Discussions. 
    It won't be a problem. You can use an 'unlimited' number of devices (iPods, iPhones etc) on a single iTunes account.
    I rushed off to O2 on Friday after work and got myself an iPhone.
    I backed up the iPod touch first (which was running 3.0 by that time) and then activated the iPhone using the iPod touch backup. Pretty much everything synced across exactly as it was on the touch (i.e. all Apps and paid apps), notes etc. One app I had never got to run on the iPod (iOSMaps) suddenly appeared on the iPhone too. Much like when you get a new Mac you find that all your settings and windows are preserved. When I opened Safari on the iPhone the last two pages I'd been looking at on the iPod were open. The only things that didn't sync were my emails - which of course downloaded shortly after the account details were synced (this is as expected), the iPhone suddenly being named 'iPod touch', my home WiFi password didn't sync and my email signature (not surprisingly still read - Sent from my iPod touch'.)
    regards
    mrtotes

  • Windows 8.1, iOS 8.1.3, Itunes 12.1 64 bit, constantly get 'waiting for changes to apply' when trying to sync my new ipod touch

    Windows 8.1, iOS 8.1.3, Itunes 12.1 64 bit, constantly get 'waiting for changes to apply' when trying to sync my new ipod touch. Downloaded latest version f itunes, and ipod software up to date. Really frustrated I can't sync my music! Please can someone help me

    Im having huge issues after updating to 12.1 on Win 8.1  x64. Choppy playback and so on.
    Try this since it helps in most situtation :
    Remove itunes but keep library files. Then download it again and install it.
    Also most likely you will have to restore ipod touch. I restored my iPhone 5 to remove waiting for changes to apply and Error 54.
    my iPad air still isnt restored (cant do it now) and it sometimes does same like iPhone waiting for changes to apply. And gives error 54 but sync DOES GET COMPLETED.
    Also may sound stupid but try to use USB 2.0 Ports. Not 3.0. I have troubles when using 3.0

  • IPod touch will not sync error message 13019 even with newest version of itunes

    hello yesterday I was having trouble with syncing and the error message 13019 popped up. I was told that by updating itunes to the newest version would solve the problem. My itunes has been updated but when I try to drag any music to "iPod touch" under devices the error messege pops up again. I have an older version of the ipod touch and it asks me to update it to 4.2? I believe thats the newest version. When I try to update that it says there are things on my iPod that will be lost if I don't sync it but it doesn't allow me to sync my ipod! Thank you for any help.

    - Transfer iTunes purchases to the computer by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - Transfer other music by using a third-party program like one of those discussed here:
    Copy music from Ipod to new computer...: Apple Support Communities
    - Connect the iPOd to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
    - Restore the iPod from that backup.

  • To generate planned orders throught MRP even without forecast/sales orders

    Goor morning, we should send long term plan forecast to the suppliers, but in the system we're able to see just few weeks demand (lng term horizon is not still implemented). Do you think is possible to generate some planned order as MTS policy (based on the past consumption), even without any sales order or forecast inside the system? Tks in advance

    1) create a Plan IN MD61 with inactive version select the period as you want & enter  W- week in initial screen
    2) create a plan In MS31 and assign the created in active version plan in MS32 assign the plant and activate  independent requirement
    3) Run MRP in MS01, system will create a plan order for LTP
    4) and do the evaluation for created plan order in MS38.

  • Rs.exe is too slow even without parameters

    Hi,
    A colegue of mine is trouble shooting a performance issue in Reporting Services. He has found that just executing
    rs.exe in the command prompt even without any parameters is takes around 30 seconds.
    Have any of you seen this problem?
    He also found that this is true for any Reporting Services executable. However, for Integration Services executable this problem does not occurs!
    Thanks in advance,
    Tiago.

    Hi,
    We executed the rs.exe using
    the information in the PATH environment variable. The file is located in C:\Program
    Files (x86)\Microsoft SQL Server\100\Tools\Binn\rs.exe (SQL Server 2008 SP3).
    Looking at the trace generated by the Procmon.exe (Sysinternals)
    we found that there are 54 hits to registry key "\Internet Settings\Connections", wasting more than 13 seconds accessing this key.
    We disconnected the network in a server not having this problem (before removing the network cable) and it took 63 seconds to execute rs.exe without
    parameters. Subsequent calls were almost instantaneous to return: "Missing required option: input file".
    Is there a way to prevent rs.exe to
    waste some much time trying to get any network information?
    Thanks in advance,
    Tiago.

Maybe you are looking for