Syndication Search Using Remote System

Is there a way to use the Key Mapping's remote system as part of the search criteria for syndication?
I am not referring to the map property that allows you to suppress records that do not have a remote key.
For example, only send records when "remote system = DEV_100".
Thanks,
Keith

Hi,
When you create a map you have already defined the remote system for which is getting created and you have mapped key and name of that in the syndicator mapping.Suppose you craeted a map fro remote system DEV04
Now when you only want to syndicate the records for this remote system then you should define only this as a output remote systems and then if you have supressed records without key,then only records pertaining to the DEV04 system which have key will get syndicated and not others
Thanks
Vinay

Similar Messages

Remote System Explorer on a Wireless LAN

On a wireless LAN when I use Remote System Explorer, it knocks our Fieldpoint network modules off-line. We are unable to ping them. Once we restart the units, they work fine until someone uses the Remote System Explorer again. Any ideas?

We have FP1600s and FP2015s. It only affects certain FP1600s. Firmware revision is 3.0 on the 1600s. Some older ones are not affected and some newer ones are. We configure them in the shop on a LAN, then move them to a field environment. The only firewall is point of entry onto the post.
When using Remote System Explorer (the latest and greatest version), one at a time is "knocked off line". Every time Remote System Explorer refreshes another 1600 is knocked off line. I see no relevance to a crossover cable. This occurs over a WLAN. If we don't use Remote System Explorer then they just chug along fine.
I have used the FP1600 Diagnostic Utility which was a mistake. Now the status LEDs blinks red 7 times.

Search for [Remote Key] and [Remote System] in Data Manager

Hello all
I would like to be able to search on the remote key and the remote system in the MDM Data Manager is that not possible? I thought I remembered seeing that possibility under the Free-Form Search but now I can't find it.
I have, however, found this in the Data Manager reference guide:
REMOTE SYSTEM AND REMOTE KEY FIELDS
MDM uses the remote systems defined in the Remote Systems table
within the MDM Console to store and maintain key mapping information
for each record or text attribute. It does this using a virtual key
mapping field that you never see in the MDM Client.
This virtual key mapping field is very much like a qualified lookup field
into a virtual key mapping qualified lookup table.
Key Mapping information stored in virtual lookup field
The Remote System and Remote Key fields are normally not visible;
however, they do appear in several places in the MDM Client.
Specifically, both fields: (1) appear in the File > Export dialogs in Record
mode for exporting value pairs; (2) are recognized by the File > Import
dialog in Record mode for importing value pairs; and (3) appear in the
Edit Key Mappings dialogs in both Record mode and Taxonomy mode,
for viewing and editing value pairs.
Is there any way to search on the value in the remote key from the Data Manager?

Not sure search i think not possible.
But you can see keys as mentioned:
Enable Key mapping in Console.
MDM Client maens MDM Data Manager.
They do appear in several places in the MDM Client or Data Manager. Three different methods to see in DM are given already below:
Specifically, both fields: (1) appear in the File > Export dialogs in Record mode for exporting value pairs; (2) are recognized by the File > Import dialog in Record mode for importing value pairs; and (3) appear in the Edit Key Mappings dialogs in both Record mode and Taxonomy mode, for viewing and editing value pairs.
BR,
Alok

Search for records by Remote Key or Remote System in Data Manager

Hi all,
We have a requirement to search for records by Remote key and/or Remote System at the main table level. Is it possible to do this using the Data Manager? If so, how?
Thanks in advance!
Lavanya.

Hi,
I crosschecked with MDM 5.5 and Don't think it is possible through Data Manager. How ever using APIs you can search records using remote key/ remote system.
Regards,
Shiv

Unable to Edit/Remove Remote Systems using MDM 7.1

Unable to find an answer to this in either the forums or the Wiki...
Using MDM 7.1 through the SAP MDM Console 7.1.03.54
I can add a new Remote System, it comes up with the default values for the Remote System fields:
Name: New Remote System, Code: NewRemoteSystem, Type: Inbound, Key Generation: None
But I cannot modify the field values nor can I delete the Remote System.
The right-click context menu always has 'Delete Remote System' greyed out.
Nor do I see any mechanism to modify the fields' values. Moving to the Remote System Detail pane, none of the fields are edittable; I have tried left-clicking, right-clicking, double clicking, using the Edit tool bar menu - nothing lets me edit these fields.
My user account has the Admin role. Looking to the Admin role, it has Execute for all functions, and Read-Write to the Remote Systems in the Tables and Fields tab.
Any help would be appreciated.

Hi Andrew,
Your repository should be in unloaded state to make changes in any table whether main table, subtable, Ports, Special tables or Remote Systems table etc. As you want to make changes in your repository Remote Systems, please unload your repository->Go to Admin>Remote systems>Make necessary changes (Add/Delete/update)--> Then load repository.
Note: You can only add User and Roles during Repository loaded state.
Regards,
Mandeep Saini

Not able to access javaFx charts from a remote system after using ext. jars

We are facing following issue. Any recommendations to resolve these issues are highly appreciated.
1. Not able to access javaFx charts from a remote system (More details at the end of mail).This is high priority requirement as we have a web based reporting application and users access it over our static IP address.
We are using Java Fx charts in our web application where we built jnlp and jar files in a separate fx project and kept jar and jnlps inside our web project.
It is working fine when we did not used any external jar files and remotely it is accessible. But when we used external jars our project is running on local
system but remotely it is not working due to some path settings. We modified jnlp files where entry of jar files exists and modified the jar path as per our
project. But still it did not work.
Before using external jars inside our java fx project my jnlp looks like:
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/" href="JavaFXApplication3.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="http://dl.javafx.com/1.2/javafx-rt.jnlp"/>
<jar href="JavaFXApplication3.jar" main="true"/>
</resources>
<application-desc main-class="com.sun.javafx.runtime.main.Main">
<argument>MainJavaFXScript=misc.Test</argument>
</application-desc>
<update check="background">
</jnlp>
After modifying my jnlp as per my project as
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="/PiFx/FxFiles/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
<jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
</resources>
<applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
<param name="MainJavaFXScript" value="misc.MyChart">
</applet-desc>
<update check="background">
</jnlp>
After adding external jars my jnlp looks like this :
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/" href="JavaFXApplication3.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
2009/JavaFXApplication3/dist/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="http://dl.javafx.com/1.2/javafx-rt.jnlp"/>
<jar href="JavaFXApplication3.jar" main="true"/>
<jar href="lib/jdom.jar"/>
</resources>
<application-desc main-class="com.sun.javafx.runtime.main.Main">
<argument>MainJavaFXScript=misc.Test</argument>
</application-desc>
<update check="background">
</jnlp>
I have modified the jnlp as per my project :
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
<information>
<title>JavaFXApplication3</title>
<vendor>Saurabh</vendor>
<homepage href="/PiFx/FxFiles/"/>
<description>JavaFXApplication3</description>
<offline-allowed/>
<shortcut>
<desktop/>
</shortcut>
</information>
<resources>
<j2se version="1.5+"/>
<extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
<jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
<jar href="/PiFx/FxFiles/lib/jdom.jar"/>
</resources>
<applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
<param name="MainJavaFXScript" value="misc.MyChart">
</applet-desc>
<update check="background">
</jnlp>
where PiFx is our project Name

We have tried few things given in thread : http://forums.sun.com/thread.jspa?threadID=5401999
Now it is not able to get the external jar file only
exception: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar.
java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
     at com.sun.deploy.net.DownloadEngine.getCachedResourceFilePath(Unknown Source)
     at com.sun.javaws.LaunchDownload.getSignedJNLPFile(Unknown Source)
     at com.sun.javaws.LaunchDownload.checkSignedLaunchDescHelper(Unknown Source)
     at com.sun.javaws.LaunchDownload.checkSignedLaunchDesc(Unknown Source)
     at sun.plugin2.applet.JNLP2Manager.prepareLaunchFile(Unknown Source)
     at sun.plugin2.applet.JNLP2Manager.loadJarFiles(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception: java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
exception: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar.
java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
     at com.sun.deploy.net.DownloadEngine.getCachedResourceFilePath(Unknown Source)
     at com.sun.javaws.LaunchDownload.getSignedJNLPFile(Unknown Source)
     at com.sun.javaws.LaunchDownload.checkSignedLaunchDescHelper(Unknown Source)
     at com.sun.javaws.LaunchDownload.checkSignedLaunchDesc(Unknown Source)
     at sun.plugin2.applet.JNLP2Manager.prepareLaunchFile(Unknown Source)
     at sun.plugin2.applet.JNLP2Manager.loadJarFiles(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception: java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
JavaFXApplication3.jnlp
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3.jnlp">
    <information>
        <title>JavaFXApplication3</title>
        <vendor>Saurabh</vendor>
        <homepage href="/PiFx/FxFiles/"/>
        <description>JavaFXApplication3</description>
        <offline-allowed/>
        <shortcut>
            <desktop/>
        </shortcut>
    </information>
    <resources>
        <j2se version="1.5+"/>
        <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
        <jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
        <jar href="/PiFx/FxFiles/lib/jdom.jar" main="true" />
    </resources>
    <application-desc main-class="com.sun.javafx.runtime.main.Main">
        <argument>MainJavaFXScript=misc.MyChart</argument>
    </application-desc>
    <update check="background">
</jnlp>JavaFXApplication3_browser.jnlp
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
    <information>
        <title>JavaFXApplication3</title>
        <vendor>Saurabh</vendor>
        <homepage href="/PiFx/FxFiles/"/>
        <description>JavaFXApplication3</description>
        <offline-allowed/>
        <shortcut>
            <desktop/>
        </shortcut>
    </information>
    <resources>
        <j2se version="1.5+"/>
        <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
       <jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
        <jar href="/PiFx/FxFiles/lib/jdom.jar" main="true"/>
    </resources>
    <applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
        <param name="MainJavaFXScript" value="misc.MyChart">
    </applet-desc>
    <update check="background">
</jnlp>Applet Code
javafx({
archive: "../FxFiles/JavaFXApplication3.jar",
draggable: true,
height:hgt,
width:wdt,
code: "misc.MyChart",
name: appletName,
id: appletName
});

Can I find the OS of a remote system using LabVIEW?

I wish to be able to start an application on a remote system using
LabVIEW. To do this, I need to know what the OS of the remote system is
(Windows, Linux, etc). I can ask the user to provide this information
for me, but is there any way I can get LabVIEW to automatically
retrieve this information? I know I can use the application node with
the OS sub-section to get this information for the local machine... is
there any way I can remotely run this? Would VI server allow me to run
this, if I turned it into a VI, on the remote system such that I could
retrieve this information for the remote system? Or is there a neater
solution I'm missing?
Cheers,
M.J.

Heya... many thanks for the suggestion(s).
The problem with my case is there's any number of users on the network
that might be using this, and it could be running on a Windows or Linux
box, depending on user circumstances, so trying to get a VI Starter
type application put into the start-up of all machines just in case is
a) overkill & b) more than I want to bite off So basically I
need to have the VI running on the machine in order to use VI server is
what I'm hearing & reading from the help, which essentially my idea
of dynamically firing off labview & loading/running any VI on the
remote system just ain't possible... hmmmn.
Back to the drawing board then, it looks like...
Cheers,
M.J.

How to create the log file in remote system using log4j.

Hi,
How to create the log file in remote system using log4j. please give me a sample code or related links.The below example i used for create the log file in remote system but it return the below exception.Is there any authandication parameter for accessing the remote path? Please help.
public class Logging
Logger log=null;
FileAppender fileapp=null;
public Logging(String classname)
try
log = Logger.getLogger(classname);
String path=" [\\192.168.0.14\\c$\\LOG\\d9\\May_08_2008_log.txt|file://\\192.168.0.14\\c$\\LOG\\d9\\May_08_2008_log.txt]";
fileapp = new FileAppender(new PatternLayout("%r [%t] %-5p %c %x - %m%n"),path, true);
log.addAppender(fileapp);
log.info("Logger initilized");
}catch(Exception ex)
ex.printStackTrace();
java.io.FileNotFoundException: \\192.168.0.14\c$\LOG\d9\May_08_2008_log.txt (The network path was not found)
at java.io.FileOutputStream.openAppend(Native Method)
at java.io.FileOutputStream.<init>(Unknown Source)
at java.io.FileOutputStream.<init>(Unknown Source)
at org.apache.log4j.FileAppender.setFile(FileAppender.java:290)
at org.apache.log4j.FileAppender.<init>(FileAppender.java:109)
at annwyn.logger.BioCapLogger.<init>(Logging.java:23)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Please help.
Thanks in advance.
Saravanan.K

Sorry path is missing for the above request.
path="\\192.168.0.14\c$\LOG\d9\May_08_2008_log.txt ";
please help.
Saravanan.K

Getting error as "Error occurred during your search, contact your system administrator" while using talent search in portal (TREX)

Hello Experts,
     We are facing an issue like when our Talent specialist are trying to use talent search through their portal they are getting an error like "Error occurred during your search, contact your system administrator" as shown below.
     We have checked in our backend and for all the talent specialist search results are showing successfully.
     Anyone of you kindly help us to get this sorted out.
Thanks & regards,
Sakthi

Hi Sarabjeet,
The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
I will check if I can find out any more specific info.
Daniel

Persistent search using system.directoryservices.protocols

My goal is to develop an application in VB.NET that monitors eDirectory
using an LDAP persistent search. As user objects are added, moved,
renamed and deleted in eDirectory, the program will construct an event
notification in XML format and send it to an email account for
processing by other programs.
I've tried implementing the above functionality using the now
unsupported Novell Internet Directory ActiveX control (NWIDir), which
supports a PersistentSearch method and change notification via a
DirectoryModified event. But have found that it will only run for a few
minutes and then crashes either when run in the VB6 IDE or as an
executable. Since the these ActiveX controls are now unsupported (a
real shame, since they offer AMAZING functionality and INCREDIBLE ease
of use), I decided to go with a pure VB.NET solution.
I settled on using the System.DirectoryServices.protocols name space
and have tried to implement a persistent search with the following code:
Dim error_message As String = ""
Dim ldapcon As LdapConnection = LDAP_Connect(error_message)
If ldapcon Is Nothing Then
'Failed to connect to the ldap server.
MessageBox.Show("Failed to connect to ldap server,
Exception: " & error_message)
Exit Sub
End If
Dim attributesList() As String = {"cn", "SSN", "sn",
"givenname", "initials", "l", "ou", "telephonenumber",
"facsimiletelephonenumber", "title", "description", "uid",
"logindisabled", "logintime", "passwordexpirationtime",
"passwordexpirationinterval"}
Dim ctrlData As Byte() = BerConverter.Encode("{ibb}", New
Object() {1, True, True})
Dim persistentSearchControl As New
DirectoryControl("2.16.840.1.113730.3.4.3", ctrlData, True, True)
Dim searchRequest As New SearchRequest("o=oes",
"(&(objectclass=inetorgperson)(cn=*))",
System.DirectoryServices.Protocols.SearchScope.Sub tree, attributesList)
searchRequest.Controls.Add(persistentSearchControl )
Dim asyncCallBack As New AsyncCallback(AddressOf
PersistentSearchCallBack)
Dim timeSpan As New TimeSpan(1, 0, 0, 0, 0)
ldapcon.BeginSendRequest(searchRequest, timeSpan,
PartialResultProcessing.ReturnPartialResults, asyncCallBack,
searchRequest)
Here's my Asynch callback subroutine definition:
Sub PersistentSearchCallBack(ByVal ar As IAsyncResult)
End Sub
Here's my function library that I developed for connecting to
eDirectory VIA SSL just for reference:
Function LDAP_Connect(ByRef Error_Message As String) As
LdapConnection
'This function connects to an LDAP server and returns an
LDAPConnection object.
'If a connection cannot be established, the function will
return Nothing, and the
'Error_Message parameter will be set to the error returned by
the LDAP server.
Error_Message = ""
Try
Dim ldapcon As LdapConnection = New LdapConnection(New
LdapDirectoryIdentifier(LDAP_Server_IP & ":" & LDAP_Port), New
System.Net.NetworkCredential(LDAP_Authentication_D N, ldap_Password))
ldapcon.SessionOptions.SecureSocketLayer = True
ldapcon.SessionOptions.VerifyServerCertificate = New
VerifyServerCertificateCallback(AddressOf ServerCallback)
ldapcon.AuthType = AuthType.Basic
ldapcon.Bind()
Return ldapcon
Catch ex As Exception
'Failed to bind to ldap server.
Error_Message = ex.Message.ToString
Return Nothing
End Try
End Function
Public Function ServerCallback(ByVal connection As LdapConnection,
ByVal certificate As
System.Security.Cryptography.X509Certificates.X509 Certificate) As
Boolean
'Validate that the exchanged public keys match each other.
Try
Dim expectedCert As X509Certificate = New
X509Certificate(LDAP_SSL_Certificate)
If expectedCert.GetRawCertDataString =
certificate.GetRawCertDataString Then
Return True
Else
Return False
End If
Catch ex As Exception
'Certificate could not be loaded.
Return False
End Try
End Function
When I run the code, I get an the following error message:
The server does not support the control. The control is
critical.
Any help from someone who has successfully done an LDAP persistent
search against eDirectory using the System.DirectoryServices.Protocols
name space would be greatly appreciated, I've been trying to figure this
out in my spare time for a few weeks now. Thanks in advance!
jstaffor
jstaffor's Profile: http://forums.novell.com/member.php?userid=18218
View this thread: http://forums.novell.com/showthread.php?t=414012

On 6/23/2010 8:03 AM, Michael Bell wrote:
> On 6/23/2010 7:06 AM, jstaffor wrote:
>>
>> My goal is to develop an application in VB.NET that monitors eDirectory
>> using an LDAP persistent search. As user objects are added, moved,
>> renamed and deleted in eDirectory, the program will construct an event
>> notification in XML format and send it to an email account for
>> processing by other programs.
>>
>> I've tried implementing the above functionality using the now
>> unsupported Novell Internet Directory ActiveX control (NWIDir), which
>> supports a PersistentSearch method and change notification via a
>> DirectoryModified event. But have found that it will only run for a few
>> minutes and then crashes either when run in the VB6 IDE or as an
>> executable. Since the these ActiveX controls are now unsupported (a
>> real shame, since they offer AMAZING functionality and INCREDIBLE ease
>> of use), I decided to go with a pure VB.NET solution.
>>
>> I settled on using the System.DirectoryServices.protocols name space
>> and have tried to implement a persistent search with the following code:
>>
>>
>> ************************************************** *******
>> Dim error_message As String = ""
>> Dim ldapcon As LdapConnection = LDAP_Connect(error_message)
>>
>> If ldapcon Is Nothing Then
>> 'Failed to connect to the ldap server.
>> MessageBox.Show("Failed to connect to ldap server,
>> Exception: "& error_message)
>> Exit Sub
>> End If
>> Dim attributesList() As String = {"cn", "SSN", "sn",
>> "givenname", "initials", "l", "ou", "telephonenumber",
>> "facsimiletelephonenumber", "title", "description", "uid",
>> "logindisabled", "logintime", "passwordexpirationtime",
>> "passwordexpirationinterval"}
>>
>> Dim ctrlData As Byte() = BerConverter.Encode("{ibb}", New
>> Object() {1, True, True})
>>
>> Dim persistentSearchControl As New
>> DirectoryControl("2.16.840.1.113730.3.4.3", ctrlData, True, True)
>> Dim searchRequest As New SearchRequest("o=oes",
>> "(&(objectclass=inetorgperson)(cn=*))",
>> System.DirectoryServices.Protocols.SearchScope.Sub tree, attributesList)
>>
>> searchRequest.Controls.Add(persistentSearchControl )
>> Dim asyncCallBack As New AsyncCallback(AddressOf
>> PersistentSearchCallBack)
>> Dim timeSpan As New TimeSpan(1, 0, 0, 0, 0)
>>
>> ldapcon.BeginSendRequest(searchRequest, timeSpan,
>> PartialResultProcessing.ReturnPartialResults, asyncCallBack,
>> searchRequest)
>> ************************************************** ******
>> Here's my Asynch callback subroutine definition:
>>
>> Sub PersistentSearchCallBack(ByVal ar As IAsyncResult)
>>
>> End Sub
>>
>> Here's my function library that I developed for connecting to
>> eDirectory VIA SSL just for reference:
>>
>> Function LDAP_Connect(ByRef Error_Message As String) As
>> LdapConnection
>> 'This function connects to an LDAP server and returns an
>> LDAPConnection object.
>> 'If a connection cannot be established, the function will
>> return Nothing, and the
>> 'Error_Message parameter will be set to the error returned by
>> the LDAP server.
>> Error_Message = ""
>>
>> Try
>> Dim ldapcon As LdapConnection = New LdapConnection(New
>> LdapDirectoryIdentifier(LDAP_Server_IP& ":"& LDAP_Port), New
>> System.Net.NetworkCredential(LDAP_Authentication_D N, ldap_Password))
>> ldapcon.SessionOptions.SecureSocketLayer = True
>> ldapcon.SessionOptions.VerifyServerCertificate = New
>> VerifyServerCertificateCallback(AddressOf ServerCallback)
>> ldapcon.AuthType = AuthType.Basic
>> ldapcon.Bind()
>> Return ldapcon
>> Catch ex As Exception
>> 'Failed to bind to ldap server.
>> Error_Message = ex.Message.ToString
>> Return Nothing
>> End Try
>> End Function
>>
>> Public Function ServerCallback(ByVal connection As LdapConnection,
>> ByVal certificate As
>> System.Security.Cryptography.X509Certificates.X509 Certificate) As
>> Boolean
>> 'Validate that the exchanged public keys match each other.
>> Try
>> Dim expectedCert As X509Certificate = New
>> X509Certificate(LDAP_SSL_Certificate)
>>
>> If expectedCert.GetRawCertDataString =
>> certificate.GetRawCertDataString Then
>> Return True
>> Else
>> Return False
>> End If
>> Catch ex As Exception
>> 'Certificate could not be loaded.
>> Return False
>> End Try
>> End Function
>>
>> When I run the code, I get an the following error message:
>>
>> The server does not support the control. The control is
>> critical.
>>
>> Any help from someone who has successfully done an LDAP persistent
>> search against eDirectory using the System.DirectoryServices.Protocols
>> name space would be greatly appreciated, I've been trying to figure this
>> out in my spare time for a few weeks now. Thanks in advance!
>>
>>
> That error is telling you plain and simple the control you want to use
> doesn't exist in the RootDSE.
Also see,
http://www.novell.com/documentation/...a/agpcvpg.html
You have to enable persistant searches.

Everytime I want to remote my itunes from my iphone, itunes search for radio-stream updates. I often use remote when I'm not connected to Internet so itunes tell me that I should connect to Internet. This is new since 10.5. Can I turn this off?

Everytime I want to remote my itunes from my iphone, itunes search for radio-stream updates. I often use remote when I'm not connected to Internet so itunes tell me that I should connect because the radio-stream update can't be made. This is new since 10.5. Can I turn off the search for Radio-Stream or does someone else has an Idea how to fix the problem?

weird very weird. today i did this again today after already being unsuccessful earlier. exactly the same thing as i have done before, exactly. didn't try to import. didn't say damaged library, copied everything in including date. have tried it about 10 times no luck. today it just worked.
how weird is that?
oh well JG - maybe you mixed a magic potion for me?
anyway, thank you for all the help.
to anyone else reading this all i can say is keep trying, you never know. follow the above advice. you may feel exasperated and think you have done it already, but keep trying.
cheers
P

Unable to add remote system into cluster using osx 10.5.2

About a month ago, I had a quartermaster managed compressor cluster setup with three (3) systems. I was running FCP 6.0. on one system with quartermaster on that system managing the cluster. Compressor, quatermaster, and quicktime were installed on the other systems. All systems were running osx 10.5. FCP 6.0 suite tools was installed on one system. One of the systems was an intel and I had a two (2) instances setup as well as a virtual cluster on the intel. All worked perfectly.
All machines were upgraded, to the latest quartermaster, compressor, quicktime, and osx 10.5.2 with the leopard graphics updates.
Now I can no longer join the remote systems into the cluster. On these systems I have share and managed set, for both rendering and compressor. Yet in quartermaster they only show up as rendering nodes. If I remove the shared option, then the nodes appear as a unmanaged compressor service. But they are greyed and cannot be added to a cluster.
Before the update, they would display in quartermaster as both rendering and compressor services and could be added to a managed compressor cluster.
Did the updates break something or is there a new requirement that I am missing?
thanks

I'm having exactly the same problem on multiple machines, both Intel octocore and G5 quadcore. I'm running 10.5.4 with all the latest updates on all machines. Everything was working, now we can't drag any of the machines into a cluster to make a new one. Like you say, they only appear if Managed is unchecked (on the machine providing the QMaster service), and then are still greyed out, and not draggable. And you can't save a cluster without specifying the cluster controller, which you can't because nothing can be dragged in. The nodes appear to be unlocked (although the icon isn't very obvious), but even if they're locked, there is no password entry that pops up when clicked, and none have a password set in their QMaster System Preferences.
To test, I did a totally 100% fresh pristine Leopard install and a dual G5, ran all OS upgrades, then did a fresh FCP Studio 2 install, and ran upgrades again and repaired permissions just for good measure. No dice. Exactly the same problem as on the other machines. This is a brand new install and it doesn't work!
Very frustrating problem and I can't believe more people aren't seeing it. Totally fresh install, what else can be done? Well, time to call AppleCare, I guess.

Remote System and Remote Key Mapping at a glance

Hi,
I want to discuss the concept of Remote System and Remote Key Mapping.
Remote System is a logical system which is defined in MDM Console for a MDM Repository.
We can define key mapping enabled at each table level.
The key mapping is used to distinguish records at Data Manager after running the Data Import.
Now 1 record can have 1 remote system with two different keys but two different records cannot have same remote system with same remote key. So, Remote key is an unique identifier for record for any remote system for each individual records.
Now whenever we import data from a Remote System, the remote system and remote key are mapped for each individual records. Usually all records have different remote keys.
Now, when syndicating back the record with default remote key is updated in the remote system that is sent by xml file format.
If same record is updated two times from a same remote system, the remote key will be different and the record which is latest contains highest remote key.
Now, I have to look at Data Syndication and Remote key.
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back. But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
Regards
Kaushik Banerjee

You are right Kaushik,
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back.
Yes, but if they are duplicate, they needs to be merged.
But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
This is after merging. So whichever remote key has tick mark in key mapping option(default) , it will be syndicated back.
Pls refer to these links for better understanding.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c%0c
Hope this helps,
+ An

Cannot use Remote Desktop host on Windows 8.1 Pro, termsrv corrupted?

Hello,
Few days ago I upgraded my home desktop machine from Windows 8.1 to Windows 8.1 Professional so I can use the Remote Desktop feature.
I enabled everything needed, checked "Allow computers to connect to this computer" from the Remote Settings, forwarded the port 3389 in my rounter and allowed it in my firewall etc...
But I still can't connect to this computer from outside my home network or inside it. The error I get trying to connect is this:
(For some reason i still can't post images in this forum...) So I posted a link below to my original thread with the images
I'm trying to connect using a laptop running Windows 7 Home Premium.
After searching around I found out that the service responsible for the RDP is called "TermService", I found it on my services but was unable to start it:
(For some reason i still can't post images in this forum...) So I posted a link below to my original thread with the images
Also, notice the description of the service. So I tried to run a System File Checker on the service's DLL (sfc /scanfile=c:\windows\system32\termsrv.dll) and got this log:
2014-10-05 14:20:41, Info CBS TI: --- Initializing Trusted Installer ---
2014-10-05 14:20:41, Info CBS TI: Last boot time: 2014-10-05 13:56:05.492
2014-10-05 14:20:41, Info CBS Starting TrustedInstaller initialization.
2014-10-05 14:20:41, Info CBS Ending TrustedInstaller initialization.
2014-10-05 14:20:41, Info CBS Starting the TrustedInstaller main loop.
2014-10-05 14:20:41, Info CBS TrustedInstaller service starts successfully.
2014-10-05 14:20:41, Info CBS No startup processing required, TrustedInstaller service was not set as autostart
2014-10-05 14:20:41, Info CBS Startup processing thread terminated normally
2014-10-05 14:20:41, Info CBS Starting TiWorker initialization.
2014-10-05 14:20:41, Info CBS Ending TiWorker initialization.
2014-10-05 14:20:41, Info CBS Starting the TiWorker main loop.
2014-10-05 14:20:41, Info CBS TiWorker starts successfully.
2014-10-05 14:20:41, Info CBS TiWorker: Client requests SFP repair object.
2014-10-05 14:20:41, Info CBS Universal Time is: 2014-10-05 11:20:41.783
2014-10-05 14:20:41, Info CBS Loaded Servicing Stack v6.3.9600.17246 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.17246_none_fa4ae8e99b1f603c\cbscore.dll
2014-10-05 14:20:41, Info CSI 00000001@2014/10/5:11:20:41.786 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffee15c60e5 @0x7ffeeace2e53 @0x7ffeeace24ac @0x7ff69a94d2df @0x7ff69a94dc97
@0x7fff02912225)
2014-10-05 14:20:41, Info CBS SQM: Initializing online with Windows opt-in: True
2014-10-05 14:20:41, Info CBS SQM: Cleaning up report files older than 10 days.
2014-10-05 14:20:41, Info CBS SQM: Requesting upload of all unsent reports.
2014-10-05 14:20:41, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_std.sqm, flags: 0x2
2014-10-05 14:20:41, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_all.sqm, flags: 0x6
2014-10-05 14:20:41, Info CBS NonStart: Set pending store consistency check.
2014-10-05 14:20:41, Info CSI 00000002@2014/10/5:11:20:41.801 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffee15c60e5 @0x7ffef3637fc0 @0x7ffef36380f2 @0x7ff69a94ca25 @0x7ff69a94dcae
@0x7fff02912225)
2014-10-05 14:20:41, Info CSI 00000003 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDisposition = @0x559943db20
2014-10-05 14:20:41, Info CSI 00000004 Creating NT transaction (seq 1), objectname [6]"(null)"
2014-10-05 14:20:41, Info CSI 00000005 Created NT transaction (seq 1) result 0x00000000, handle @0x26c
2014-10-05 14:20:41, Info CSI 00000006 Poqexec successfully registered in [ml:26{13},l:24{12}]"SetupExecute"
2014-10-05 14:20:41, Info CSI 00000007@2014/10/5:11:20:41.999 Beginning NT transaction commit...
2014-10-05 14:20:41, Info CSI 00000008@2014/10/5:11:20:41.999 CSI perf trace:
CSIPERF:TXCOMMIT;143
2014-10-05 14:20:42, Info CSI 00000009 CSI Store 367642371808 (0x00000055993166e0) initialized
2014-10-05 14:20:42, Info CSI 0000000a [SR] Verifying 1 components
2014-10-05 14:20:42, Info CSI 0000000b [SR] Beginning Verify and Repair transaction
2014-10-05 14:20:42, Info CSI 0000000c [SR] Verify complete
2014-10-05 14:20:52, Info CBS TiWorker: Client requests SFP repair object.
2014-10-05 14:20:55, Info CBS TiWorker: Client requests SFP repair object.
2014-10-05 14:20:55, Info CSI 0000000d [SR] Verifying 1 components
2014-10-05 14:20:55, Info CSI 0000000e [SR] Beginning Verify and Repair transaction
2014-10-05 14:20:55, Info CSI 0000000f Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000010 [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.3.9600.17095,
pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-05 14:20:55, Info CSI 00000011 Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000012 [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.3.9600.17095,
pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-05 14:20:55, Info CSI 00000013 [SR] This component was referenced by [l:154{77}]"Package_3_for_KB2959626~31bf3856ad364e35~amd64~~6.3.2.0.2959626-3_neutral_GDR"
2014-10-05 14:20:55, Info CSI 00000014 Hashes for file member \??\C:\Windows\System32\termsrv.dll do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000015 Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000016 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:22{11}]"termsrv.dll"; source file
in store is also corrupted
2014-10-05 14:20:55, Info CSI 00000017 [SR] Verify complete
2014-10-05 14:20:55, Info CSI 00000018 [SR] Repairing 1 components
2014-10-05 14:20:55, Info CSI 00000019 [SR] Beginning Verify and Repair transaction
2014-10-05 14:20:55, Info CSI 0000001a Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 0000001b [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.3.9600.17095,
pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-05 14:20:55, Info CSI 0000001c Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 0000001d [SR] Cannot repair member file [l:22{11}]"termsrv.dll" of Microsoft-Windows-TerminalServices-RemoteConnectionManager, Version = 6.3.9600.17095,
pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-10-05 14:20:55, Info CSI 0000001e [SR] This component was referenced by [l:154{77}]"Package_3_for_KB2959626~31bf3856ad364e35~amd64~~6.3.2.0.2959626-3_neutral_GDR"
2014-10-05 14:20:55, Info CSI 0000001f Hashes for file member \??\C:\Windows\System32\termsrv.dll do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000020 Hashes for file member \SystemRoot\WinSxS\amd64_microsoft-windows-t..teconnectionmanager_31bf3856ad364e35_6.3.9600.17095_none_7f53b5b72842754a\termsrv.dll
do not match actual file [l:22{11}]"termsrv.dll" :
Found: {l:32 b:wutByJu/YxhxLZan2VmIk9CNy/65VNpYphCkpd5tWqQ=} Expected: {l:32 b:cLIGmreRLrSas6vRjUtCy5Ssmcpt4/Y/SIi46qx4qqI=}
2014-10-05 14:20:55, Info CSI 00000021 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:22{11}]"termsrv.dll"; source file
in store is also corrupted
2014-10-05 14:20:55, Info CSI 00000022 [SR] Repair complete
Since it's the first time I use this tool I'm not familiar with this log file, but what I managed to figure out from it is that termsrv.dll is corrupted and windows cannot repair it for some reason.
My question is:
How can I repair this file? Is this even the problem preventing me from connecting to this computer via Remote Desktop?
Here's a link to my original question which contatining the images.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-system/cannot-use-remote-desktop-host-on-windows-81-pro/e4776239-4d9e-4934-ae2d-b87cc09f7ade

managed to figure out from it is that termsrv.dll is corrupted and windows cannot repair it for some reason.
So, the next step supposedly is
using DISM.
Coincidentally I reached that page last night from
this one, which I thought gave me a better awareness of how much manual repair might be possible. E.g. maybe the WinSxS isn't quite as fragile as we are being led to believe? (It's making me feel sort of like how I used to feel about the
registry when seeing all the caveats about using RegEdit before I got used to that tool.)
Advanced guidelines for diagnosing and fixing servicing corruption
http://technet.microsoft.com/en-us/library/ee619779(v=WS.10).aspx
Something else that I became aware of yesterday serendipitously is SxStrace.exe. I have never seen it used but it sounds useful. E.g. perhaps easier to interpret for supplemental clues than the ProcMon trace that I usually advocate.
Or perhaps use both and see in ProcMon when the SxStrace is writing. E.g. filter with Operation Is WriteFile.
However, what I would do first is find out what the state of your system is regarding that module. E.g. try this Powershell pipeline to list what you have.
PS C:\windows> dir -R -Fil "termsrv.dll" | sort-object FullName | ft Length, FullName -AutoSize
Note that I am giving you the whole command line, including prompt to show where the command should be started from.
C.f. another thread where doing the same diagnostic procedure seems to be finding more a problem with the Windows Update software than with the user's WinSxS cache.
http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_store/windows-81-store-error-0x80070002-comprehensive/2b0ed3e1-1835-4517-97dd-0a7abb6ef74c?page=3#LastReply
HTH
Robert Aldwinckle

Assign records to different remote systems in MDM

Hello Experts,
I am using qualified range to generate internal number range for vendor. The remote key & remote system details for the records are generated during syndication. My scenario is that I have couple of records in MDM for different remote systems. I want to syndicate it to the respective systems. Is there a way to identify the respective records per system with out inserting the details in "edit key mapping".
If we try specifying Remote system details in edit key mappings with a blank or specific Key value , then the qulaified number generated for vendors is overwritten with this key value mentioned in key mapping.
I need to retain both the qualified range functionality as well as tag the records to different remote systems.
Kindly advice.
Thanks and Regards,
Elizabeth.

Hi Shiv
So, i am not sure, but this all makes me feel that syndication tasks can not be executed parallel.
Your understanding here is correct since we are using here the same table for syndication process so it will be executed in steps. I mean syndication 2 has to wait until the syndication 1 ends. But the thing is that even after syndication 1 completes syndication 2 is not going to place that's the issue here.
Please find solution which tells same thing in MDM import manager context.
Can I run two Import Managers at the same time?
Yes, several instances of the Import Manager can be open concurrently. The only existing limitation though is when actual importing process starts the tables involved in the importing process are locked for write access. So if two instances of the Import Manager import to different tables then no synchronization issue occurs. If they use the same table, then the instance getting access second has to wait until the first ends.
For more details, Please refer this below link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7dc6ba86-0501-0010-0b82-849437929f0d?quicklink=index&overridelayout=true
@ Elizabeth: After Syndication 1, Have you checked after sometime whether syndication2 & so-on takes place or not. I feel that Syndication for syndication 2 , syndication 3 & syndication 4 should also occur after some time as they executed one by one not parallel so will take some time. Just check and revert with result whether your workflow gets completed after some time or not.
Note: Make sure that for all these Syndications outbound ports Processing Type = Manual in Console else syndication will not occur.
Regards,
Mandeep Saini

Syndication Search Using Remote System

Similar Messages

Maybe you are looking for