Synergy 3105 Base reset to default - tech. Expert ...
Hi, I've had my Synergy 3105 for years and for me (with decent 1100mAh re-chargeable) it has been a great system i want to keep.
However Handset 2(HS2) developed a display problem then a catastrophic fault. I managed to get 3 more Synergy 3105 handsets then hit a problem registering them to the base station.
Because HS2 is faulty and effectively a 'lost' handset, the base station still thinks it is there, I cannot remove it because the original handset is faulty. Therefore, I can only register 4 handsets.
Does anybody know how I can reset the base station back to default, so it will forget everything it knows about the previous handset registrations?
I think I read that these units are supplied with a pre-registered Handset 1. As default. I am also curious to know if Handset 1 gets lost or is inoperable?
I suspect there may be a power up reset sequence using the base station 'page' button - but I haven't found it yet.
First correct answer gets the prize, because I think others having problems registering replacement phones and getting the 'searching' message may not realise what is going on (previous handsets still allocated).
Thanks - Vox
Solved!
Go to Solution.
That was a useful post for resetting a base station to default settings, however it does create a problem.
It leaves the Handsets orphaned and they themselves need a reset.
I have 3 Synergy 3105 base stations for different lines in my house, all worked well and I was able to register 4 handsets with each of the three base stations as Base1 Base2 & Base 3 ( Each hanset support up to 4 base stations).
I had six handsets, two for each base station and all worked well for a while.
I had the same problem of the screens giving up and somehow I lost or forgot the passwords.
So I did the reset you prescribe for BASE1 which was fine for a NEW handset but now EXISTING Handsets see the reset base unit as a brand new one and are orphaned from the BASE1 station they WERE connected to .
I have no way of deleting the Handset from the BASE1 as it requires a Pin I do not have and a base station to connect to that no longer exists.
So if I do the reset you suggest I will have to buy new handsets as these orphaned handsets can only connect to one more Base station.
What I need is some sort of Key sequence that resets a handset to Factory but does not require a Pin
Similar Messages
-
Custom View not visible in Overview page as AB unless "Reset to Default"
Hi Experts,
I am facing a strange issue here.
I enhanced the component TPMOE and created a custom view ZTRADESPENDEXCEPTION in it.
Now i have added this view as assignment block in all 6 configuration available for the overview page.
I have redefined the DETACH_STATIC_OVW_VIEWS and REATTACH_STATIC_OVW_VIEWS.
The issue i am facing is that my view assignment block is not visible to the user unless he/she goes to the personalization of the overview page and hits "Reset to Default". Once this is done, later on users can change there personalizations and everything works fine.
Now i am not sure i can go and tell all end users to go to personalization of the TPMOE overview page and click on "Reset to Default".
Is there any other way i can show my view to the end users?
I have done this on the lines of overview page layout changing when you select product planning basis while creating Trade Promotions.
Thanks and Regards
Gaurav Kumar RaghavHi Amar,
My coding is given below.
In DETACH_STATIC_OVW_VIEWS, the coding is:
Call Super Method
ls_viewid-view_id = '<My View Name>'.
Append ls_viewid to rt_view_id
In REATTACH_STATIC_OVW_VIEWS, the coding is:
Call Super Method
if <flag> = 'X'.
ls_viewid-view_id = '<My View Name>'.
Append ls_viewid to rt_return.
endif.
In debug mode, the coding get executed correctly and my view is returned for attachement.
For each user, the first time, i need to say "Reset to Default".
After that it works fine, my view is displayed.
Is the program "BSP_DLC_DELETE_PERSONALIZATION" a good solution to my problem?
Thanks and Regards
Gaurav Kumar Raghav -
I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the default for opening a project?
scottypet
For Premiere Elements 11 and 12, you cannot change its default project preset from NTSC AVCHD Full HD1080i30 or its PAL counterpart PAL AVCHD Full HD1080i25 to something else.
For each project, you can set the project preset manually if you do not want the program to take over setting the project preset based
on the properties of the first drag to the Timeline.
To set the project preset manually, open the project to the Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, change the project preset. Before you exit that area, be sure to have a check mark next to "Force Selected Project Setting on This Project" in the new project dialog.
Then you import your source media, using the appropriate Add Media choice.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
If you want a version of Premiere Elements that uses the default project preset of NTSC DV Standard or its PAL counterpart PAL DV Standard, then you need to look to a version of Premiere Elements earlier than 11.
Please let me know if you have any further questions on this or need clarification.
Thank you.
ATR -
2602e Reset to Defaults Except IP not Work over Web GUI
Hello,
1. Set a Static IP
2. Apply & Save Configuration
3. After Reboot the IP is correct.
Then do Reset to Defaults Except IP in the WEB Gui.
After Reboot the AP loos the static IP and get a DHCP Address.
Reset to Defaults Except IP = Reset to Defaults !
Whats Wrong ?OK, here is:
Writing out the event log to flash:/event.log ...
*Jan 22 17:44:56.675: %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram
*Jan 22 17:44:57.547: %SYS-5-RELOAD: Reload requested by on console. Reload Reason: Reload Command.
Write of event.log done
IOS Bootloader - Starting system.
flash is writable
FLASH CHIP: Numonyx Mirrorbit (0089)
Xmodem file system is available.
flashfs[0]: 212 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 15058432
flashfs[0]: Bytes available: 16939520
flashfs[0]: flashfs fsck took 23 seconds.
Reading cookie from SEEPROM
Base Ethernet MAC address: 10:f3:11:c2:2e:3a
Ethernet speed is 1000 Mb - FULL Duplex
Loading "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a"...##########################
File "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a" uncompressed and installed, entry point: 0x2003000
executing...
Secondary Bootloader - Starting system.
Tide MB - 32MB of flash
Xmodem file system is available.
flashfs[0]: 212 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 15058432
flashfs[0]: Bytes available: 16939520
flashfs[0]: flashfs fsck took 14 seconds.
Base Ethernet MAC address: 10:f3:11:c2:2e:3a
Boot CMD: 'boot flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a;flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a'
Loading "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a"...#######################################
File "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a" uncompressed and installed, entry point: 0x1003000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C3600 Software (AP3G2-K9W7-M), Version 15.2(4)JB3a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 23-Dec-13 08:11 by prod_rel_team
Tide MB - 32MB of flash
Initializing flashfs...
flashfs[3]: 212 files, 7 directories
flashfs[3]: 0 orphaned files, 0 orphaned directories
flashfs[3]: Total bytes: 31739904
flashfs[3]: Bytes used: 15058432
flashfs[3]: Bytes available: 16681472
flashfs[3]: flashfs fsck took 12 seconds.
flashfs[3]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 0 seconds.
flashfs[4]: Initialization complete.
Copying radio files from flash: to ram:
Copy in progress...CCCCC
Copy in progress...CCC
Copy in progress...CCCC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...CCC
Copy in progress...CC
Copy in progress...CCCCC
Uncompressing radio files...
...done Initializing flashfs.
Radio0 present 8764 8000 0 A8000000 A8010000 0
Rate table has 650 entries (20 legacy/224 11n/406 11ac)
POWER TABLE FILENAME = ram:/B2.bin
Radio1 present 8764 8000 0 88000000 88010000 4
POWER TABLE FILENAME = ram:/B5.bin
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-SAP2602E-E-K9 (PowerPC) processor (revision A0) with 204790K/57344K bytes of memory.
Processor board ID FGL1711Z6K6
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 10:F3:11:C2:2E:3A
Part Number : 73-14511-02
PCA Assembly Number : 800-37898-01
PCA Revision Number : A0
PCB Serial Number : FOC17093TXF
Top Assembly Part Number : 800-38357-01
Top Assembly Serial Number : FGL1711Z6K6
Top Revision Number : A0
Product/Model Number : AIR-SAP2602E-E-K9
Press RETURN to get started!
*Mar 1 00:00:16.035: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
*Mar 1 00:00:16.151: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (11)APAVC: WlanPAKs 18174 RadioPaks 17566
*Mar 1 00:00:23.131: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:29.443: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:29.503: initializing dot11 onplus
*Mar 1 00:00:29.667: not a autoconfig enabled device!!!
*Mar 1 00:00:31.671: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:32.671: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 1 00:01:18.015: Starting Ethernet promiscuous mode
*Jan 22 17:44:57.000: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Jan 22 17:44:57.000: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Jan 22 17:44:57.007: %CDP_PD-4-POWER_OK: Full power - HIGH_POWER inline power source
*Jan 22 17:44:57.015: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3600 Software (AP3G2-K9W7-M), Version 15.2(4)JB3a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 23-Dec-13 08:11 by prod_rel_team
*Jan 22 17:44:57.015: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start
*Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to downERROR: Failed to configure ethernet promiscuous mode. Interface Descriptor mismatch
*Jan 22 17:45:01.667: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (0-0)
*Jan 22 17:45:01.667: DPAA Initialization Complete
*Jan 22 17:45:01.667: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Jan 22 17:45:02.667: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Jan 22 17:45:06.863: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.16.33.216, mask 255.255.254.0, hostname ap -
Can I reset the default IP address of Airport Extreme?
My old Linksys router is showing it's age and needs replacing (2 of 4 ports no longer work and router requires frequent resets). I want to use an Airport Extreme base station to replace it so that I can then use my Airport Express to extend my network. Can I reset the default ip of the AEBS to match what I was using with the Linksys so that I won't have to change several static ip addresses in devices that don't play well with DHCP?
The AEBS is limited in its ability to use different IP address ranges for connected clients.
The internal or local DHCP range can be set to utilize......
10.0.x.2 to 200
192.168.x.2 to 200
172.16.x.2 to 200
The AirPort Extreme itself would always have a local IP address that would look like....
10.0.x.1
192.168.x.1
172.16.x.1
In other words, the AEBS would always have a .1 desigator by default. This cannnot be changed. -
I have no navigation bar ever since I closed it to gain more space on the screen. It won't re-open. Firefox will not open in safe mode, but opens immediately in normal mode with the new improper config, so I cannot reset to default config. I erased Firefox and re-installed and it still opens with the same faulty config. Why does Firefox not give me the safe mode dialog box, why can I not re-open the nav bar, and how can I do these two things, please? Firefox is currently unusable for me without a nav bar and without access to the default settings in safe mode. I cannot research the extensions I'm running since I have no nav bar to go to Tools, Add-ons, Extensions.
== This happened ==
Every time Firefox opened
== I closed the navigation bar to gain more space on the screen and I couldn't re-open it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar and Navigation bar, so they have a check-mark.
-
Firefox Crashing/Freezing Constantly and Resetting to Defaults
For the past few weeks, I have been having a lot of issues with Firefox crashing. Every time I try to open up a new tab or load a web page it will freeze. Sometimes this is only for a few minutes, while other times this lasts up to an hour and I have no choice but to close the program out using the task manager, as any attempts to close it normally fail. This is most prevalent within the first few minutes after I launch Firefox, and the program has been slow in this regard for quite a while, though usable after waiting a few minutes for it to fully load. As I stated though, for the past few weeks it has been completely locking up and crashing when this happens, and it continues to happen after I have already loaded web pages and try to open new ones.
I tried a complete fresh install, and the problem was fixed for a few days, however, after going for a couple of days without internet access and trying to get online again, the problem returned even worse than before. More than that, now from time to time my Firefox completely resets to default settings, clearing out my "New Tab" page's pinned tabs, as well as removing whichever theme I had applied.
This glitch has rapidly made Firefox unusable for me, which makes me very upset as I far prefer it to Google Chrome. While I don't know that it would help discern the issue, below is also a list of all the extensions I have installed as well as the plugins I have that are always active, (with all my other plugins either being disabled or "ask to activate"). With the exception of "Adblock Edge", I have had all the extensions installed for several months with no issues. "Adblock Edge" itself I only installed after uninstalling and reinstalling Firefox to try and fix my issue. My current Firefox version is 35.
Extensions:
Adblock Edge 2.1.7
DownloadHelper 4.9.24
Private Tab 0.1.7.3
Adblock Plus 2.6.7
Plug Ins:
Shockwave Flash 16.0.0.296
Unity Player 4.6.1.51269Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware -
Firefox 3.6.8 will not start. I have to go to safe start, click reset to default, ok, then the shutdown box appears, I click cancel and it will open. I have rest profile, uninstalled and reinstalled, clicked alll he boxes on safe start, tried an older version need help. in English
== This happened ==
Every time Firefox opened
== either after I last updated to 3.6.6 or .7 or reset my inernet exploerer values to defaultI had same problem where Firefox 3.6.8 would not start or open. Spent many hours trying different things to fix it. Uninstall of previous version and reinstall did not make any difference. Finally, after uninstalling Firefox, I searched for Firefox folders and files on my computer, deleted and removed all Firefox folders and files - deleted anything and everything related to Firefox so that it will be as if I was going to download Firefox for the first time ever. Then, using another browser, I downloaded Firefox 3.6.8 and installed it. It could be that some Add-Ons or something else from the older version of Firefox or profile was interfering with the new one. It was easier to delete remove everything and install all over again clean than to figure out which part was causing the problem.
Keep in mind, when you delete all Firefox folders and files from your computer, you are deleting all your bookmarks and all your Add-ons. If you want to keep those bookmarks, you might want to save the URLs someplace safe to bookmark them again before deleting them. You need to re-install the Add-ons also. Upon installation, it asks if you want to import bookmarks and settings from another browser or settings you might have. I imported them from my other browser. Now, Firefox works. I also installed up-to-date Add-ons.
I hope this helps. Always keep more than one browser functioning on your computer, just in case one fails. -
the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file -
10.5.8 Finder resets to default, desktop files gone!
The Finder on my 2008 Mac pro is really acting up at the moment an I have no idea what's going on.
My desktop has been wiped clean. Nothing there, except the drive icons. I don't keep much on the desktop but there should be a few folders and files that I always keep there for convenience. Also, Finder has reset to default settings - lost my custom Places from the sidebar and opens in icon view, which I never use.
I looked at the actual folder in Finder as well and the files are definitely not there.
What I have been doing:
I ran iDefrag on my files disk (INT HD 1TB) a few days ago (first time). I forgot to turn off Time Machine so they have probably been running at the same time.
Today Time Machine decided to backup everything from scratch, which I attribute to iDefrag switching everything around on my Files disk. Also filled the backup disk so I only have two backups at the moment, both from today.
Other than that, I have mostly been using Adobe Bridge, Photoshop and InDesign CS4 for editing quite big files. Also Firefox for normal web browsing.
Hard drives are reported to be ok. Profile is still the same name. The files are not in the Trash. Everything else is where it should be. System disk is 1/3 full. Files HD (which hasn't been affected AFAICS) 1 TB 1/2 full.
Does anyone know what could be happening to my machine?I had the same problem and finally discovered that somehow my Desktop folder had become a Package. I could not do anything on the desktop but the apps and the dock etc. were working fine. I went to Go/Home Folder/Desktop/Show Package Contents and everything was there. But nothing appeared on the desktop. I could not open a new folder and anything I tried to drag to the desktop resulted in a permissions error. I tried all of the above fixes and more. The solution? Trash the desktop folder from your Home folder, empty the trash, reboot and start all over again. If you're lucky like I was you will have a Time Machine backup and you can restore a previous Desktop easily. Worked for me!
-
I tried to set Google Chrome as my default browser in Windows 8.1 (virtual machine running in VMware Fusion 6) but somehow mysteriously failed over and over again.
According to Control Panel\Programs\Default Programs\Set Default Programs\Set Program Associations, there are 19 possible associations for Google Chrome:
Extensions: .htm, .html, .shtml, .webp, .xht, .xhtml;
Protocols: FTP, HTTP, HTTPS, IRC, MAILTO, MMS, NEWS, NNTP, SMS, SMS, SMSTO, TEL, URN, WEBCAL
I have no problem selecting some of them, or "set this program as default" so that "this program has all its defaults." (I am the only admin user, but not the builtin admin account.)
However, after restarting the VM, the program associations for Google Chrome will reset on its own. Specifically,
"this program has all its defaults" becomes "this program has 14 out of 19 defaults", losing the following five crucial protocols:
FTP, HTTP, HTTPS, MAILTO, NEWS
And these protocols simply hang there unassociated—they don't belong to IE either.
So I am extremely confused; how could the system reset my default program associations? What's wrong?
In case it is relevant, I will also post my VMware Fusion VM Default Applications settings here. All of the options are unchecked: "Open your Mac files and links using Windows applications"; "Open your Windows files and links using Mac applications";
"Run Windows applications from your Mac's Applications folder."
Thank you for your time.Hi,
I have the same issue, and I've posted on the vmware forums with no responses other than another person having the same issue.
Have you been able to fix this? I tried importing the same VM into Parallels and the problem goes away. If I do a manual uninstall of Fusion (and remove VMWare tools from the VM), and then reinstall both, the problem goes away - temporarily. I had a few
good months, and it started again. Followed the procedure mentioned, and it went away again, but only survived a few reboots.
FYI, it's definitely not an issue with Chrome, as I'm having the same issue with Firefox (although I can duplicate on chrome as well).
Have you figured anything out?
Thanks! -
How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?
I have seen this question asked previously and it seems there is no answer.
I know that one can change each individual web page (that reset defaults back to 100%) and, alternatively and apparently one can load an add-on to fix the default size at Full Zoom.
... But any hints on how to achieve a DEFAULT 125% zoom would be much appreciated.Press CTRL + 0
Have you tried Firefox's zoom feature? Font size and zoom - increase the size of web pages
You can "zoom" all sites using this add-on: [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
After installing NoSquint, click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
If you don't have the Add-on Bar displayed, you can right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
You can experiment with sizes larger than 125%, but I wouldn't go much higher than 150% unless you have a large high-resolution monitor.
If there are particular sites that still present a problem, feel free to post their URLs.
You can find more information about the zoom features Firefox offers in these articles:
[[Text zoom]] - For zooming text only
[[Page zoom]] - For zooming the whole page (including images etc.) -
How to reset to default setting pse8?
how to reset to default setting pse8?
Please follow these steps for both editor and organzier to reset them to their defaults.
Close Elements.
Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor or Organizer.
Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences. -
How do i get to the firefox window so i can reset the default settings?
it is very slow online and when i went on today there was a message to reset to default settings. when i clicked that, it told me to go to the firefox window so i could reset. i don't know how to get to the firefox window. firefox immediately goes to my browser which is comcast. when i click on firefox above, it stays in comcast.
See:
*https://support.mozilla.org/kb/firefox-health-report-says-your-browser-is-slow
Try to update to Firefox 29 via Help > About or download and save the full Firefox installer to the desktop and start the installation with a double-click on the desktop icon.
You can find the full version of the current Firefox 29.0 release in all languages and for all Operating Systems here:
*http://www.mozilla.org/en-US/firefox/all.html
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
See:
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
When you reset Firefox then a new profile is created and some personal data (bookmarks, history, cookies, passwords, form data) is automatically imported and the current profile folder will be moved to the desktop to an "Old Firefox Data" folder.
Installed extensions and other customizations (toolbars, prefs) that you have made are lost and need to be redone.
It is possible to recover more data from the old profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile -
Hello.
Problem statement is very simple: Firefox will not create bookmarks.
New installation with Mint 17. New PC build with Asus A58M-A/USB3 mother board, AMD A4 6300 processor, 4 gig memory stick.
All of the Mint and Firefox packages are up to date.
A new profile was created for testing, Firefox has been started in safe mode, purged and re-installed and reset to defaults. None of these actions have helped.
Here is the info from the Troubleshooting Information within Firefox
Application Basics
Name: Firefox
Version: 33.0
User Agent: Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:33.0) Gecko/20100101 Firefox/33.0
Multiprocess Windows: 0/1
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: Mint Search Enhancer
Version: 1.0
Enabled: true
ID: [email protected]
Name: Stylish
Version: 1.0.7
Enabled: true
ID: {46551EC9-40F0-4e47-8E18-8E5CF550CFB8}
Graphics
Adapter Description: X.Org -- Gallium 0.4 on AMD ARUBA
Device ID: Gallium 0.4 on AMD ARUBA
Driver Version: 3.0 Mesa 10.1.3
GPU Accelerated Windows: 0/1 Basic
Vendor ID: X.Org
WebGL Renderer: X.Org -- Gallium 0.4 on AMD ARUBA
windowLayerManagerRemote: false
AzureCanvasBackend: cairo
AzureContentBackend: cairo
AzureFallbackCanvasBackend: none
AzureSkiaAccelerated: 0
Important Modified Preferences
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.frecency_experiment: 3
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20141013200257
browser.startup.homepage_override.buildID: 20141013200257
browser.startup.homepage_override.mstone: 33.0
dom.mozApps.used: true
extensions.lastAppVersion: 33.0
media.gmp-gmpopenh264.lastUpdate: 1416067922
media.gmp-gmpopenh264.version: 1.1
media.gmp-manager.lastCheck: 1416067922
network.cookie.prefsMigrated: true
places.history.expiration.transient_current_max_pages: 80569
plugin.disable_full_page_plugin_for_types: application/pdf
privacy.sanitize.migrateFx3Prefs: true
Important Locked Preferences
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.7
Version in use: 4.10.7
NSS
Expected minimum version: 3.17.1 Basic ECC
Version in use: 3.17.1 Basic ECC
NSSSMIME
Expected minimum version: 3.17.1 Basic ECC
Version in use: 3.17.1 Basic ECC
NSSSSL
Expected minimum version: 3.17.1 Basic ECC
Version in use: 3.17.1 Basic ECC
NSSUTIL
Expected minimum version: 3.17.1
Version in use: 3.17.1
Experimental Features
What other information can I provide?
Thank you.
JimYou can check for problems with the <b>places.sqlite</b> database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
*Places Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/
Maybe you are looking for
-
Scheduled Report Failing - Don't Know Why
I'm trying to re-create a scheduled report on CMC that had gotten deleted. It ran before (sometimes multiple times...) but at least it ran. I'm duplicating all the settings for this report based on how they were before, but every time I try to get th
-
PLEASE HELP ME FIND A GOOD CAR PLUG FOR MY iPHONE
Alright guys, I have been through 3 different plugs to connect my iphone to my car to play music, and I am a bit ticked. So i figured I would ask the Apple Discussion Boards so you guys can tell me the best audio/charger combo for my iPhone. Here is
-
Sparks when plugging external monitor in
Slightly worried, just connected my Dell monitor via DVI to my macbook pro and noticed a small spark each time the adapter touched the port. This only happens when the display is powered. Should i be worried, is this normal? thanks.
-
How can I change the interactive PDF font?
I'm making a interactive PDF in inDesign (CS6). Problem is, when I export the file in to a interactive PDF, everything looks good except when I want to type in the text field (interactive) the font is in Times New Roman. I want another font. So my q
-
just got a used airport base station. Set it up and getting wif signal. when I try to hook up on a computer it asks for a security key. where can I locate key?