Synergy between two Arch systems. Stops working randomly. [SOLVED]

I have two PCs connected with a crossover ethernet cable. I use synergy to control them both (a laptop with two screens, a desktop with one screen).
I use Arch on my laptop and connect the mouse and keyboard to it. I start Synergy on the laptop by starting the daemon (/etc/rc.d/synergys start). When I boot Windows on the desktop, Synergy works just fine. If I use QuickSynergy on the desktop with Arch, the connection will start to randomly cut out. Sometimes after only putting the mouse to the desktop screen once, sometimes after a few minutes of use.
The only way to start it up again is to click Stop and Start on QuickSynergy. It won't usually last very long though before it cuts again.
I figured that an update may have caused the problem, so I've been waiting to see if it would get fixed, but it hasn't so far.
Any other ideas?
Last edited by themusicalduck (2012-01-18 02:29:36)

I only know of https://bugs.archlinux.org/task/26992 . Have you checked upstream? (a bit silly question because I wouldn't really know how to describe this issue)

Similar Messages

Two-Finger Scrolling Stopped Working

After updating to 10.5.6, my two-finger scrolling stopped working; everything else seems to be fine. What can I do to get it working again?

Same thing happened to me today. I've had the 10.5.6 update installed for a week and have restarted my system several times since then, and experienced no problems until now. Today was the first day I powered my system down completely (rather than just restarting) and now my trackpad is wonky.
I can use the trackpad like normal with one finger, and two-finger vertical scrolling works as long as I'm inside an application. I can also use two fingers to right-click. I just can't use two fingers to scroll in any direction besides up or down, and I can only scroll if I'm in an application or window that requires scrolling.
Inside my Trackpad preferences panel in System Prefs, there's a checkbox for "Secondary Tap" under "Two Fingers." The other options ("Scroll," "Rotate," etc.) appear but there is no checkbox next to them. There isn't a checkbox for "Swipe to Navigate" under "Three Fingers" either.
I will call Apple support and see what I can find out.

Reconnecting to Custom Motion Templates between Two Editing Systems

I'm having an issue with "media offline" in my FCP timeline whenever customized Motion templates are used in projects that are often edited between two different systems.
I always start with a standard "motion" project file and save it in my current project folder as a "Master" for creating identical templates on both systems. Yet even though both systems have the same custom template directory and the same template names, the FCP timeline always reports "Media Offline" whenever I try to work remotely on a project.
I'm wondering if it might somehow be possible to correct this issue so that my lower third overlay templates can exist on two different systems?
Thanks!

Sorry, I kind of thought my choice of words might be misunderstood. What I meant was that I always keep the original motion file that I initially created the template from in my current project folder. I am then able to open that original motion project file on the remote system and "save as template", so that (theoretically) I would end up with two identical templates (one on each system) located in the "user>library>application support>final cut studio>motion>template" directory.
I think I must have a tiny little error (or type-o) in the naming of either my template of the custom template folder. I'll have to go in and double check now that I have the correct path. (I was having a really hard time locating the "actual files" of my custom templates.
Thanks very much for your help!

RFC connection between two SAP systems (with SAP router)

Hi!
I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
The network connection between the servers is VPN.
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
my server --> customer
my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
Back-way
SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
something like:
/H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
Thank you very much!
regards
Thom

Same answer as in the other forum where you cross posted....

Catalyst control system stop working

recently i upgrade my laptop from windows 8 to 8.1 my laptop is hp pavilion e015tx after updating operating system when i try to open "configure switchable graphics" or " graphics properties" it will not open and give message "catalyst control control system stopped working"
please help me some one

Hey @prakhar12 ,
We meet again!
The CCC software may need to be updated to work on Windows 8.1.
Please try installing the most recent version from the HP website here: AMD High-Definition (HD) Graphics Driver.
This package contains the drivers for both the Intel and AMD GPU so that your switchable graphics will work in Windows 8.1.
Let me know if that helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Intra-company stock transfer between two ERP Systems without SAP APO

Hi,
I'm looking for information regarding the scenario Intra-company stock transfer between two ERP Systems without SAP APO.
On help.sap.com, I can only find below image, but I'm actually looking for the configuration settings required to implement it.
Does anyone have experience with this scenario?
Thanks & regards,
Oliver

Hi Jagdeep,
Thanks for the reply. I understand that I need to use iDocs and setup communication between both systems. What I am actually looking for is detailed information on the setup of the purchase order type and sales order type. Especially because there is no invoicing involved in this flow.
Regards,
Oliver

After Service, Airport card stops working randomly on macbook pro 17" early 2009

Hi,
So after the last time my computer was serviced, the airport card stops working randomly on moving the screen.
Upons restarting the computer, it sometimes says wi-fi hardware not installed. Then, if I move my machine around,
lift it up, turn it around, place it back on the table and restart it, it works again. I don't understand this.
And all this started happening the moment my warranty ran out. Extremely frustrating!!

It may be possible that one of the following may be the issue:
The internal AirPort Extreme card is not seated properly.
The internal Wi-Fi antenna connector is not seated properly in the AirPort Extreme card.
The internal AirPort Extreme card's connector is faulty or damaged.
The internal AirPort Extreme card is faulty.
To get an idea on how the Extreme card is installed, please check out the following iFixit article.

SMTP Namespace Sharing between two mail system

I have used two mail server (Exchange 2013 and Linux sendmail) for mailing in the same domain like abc.com.
I have converted authoritative domain in to internal relay for sending mail in Linux mail user, and create a send connector point to Linux mail system as a smart host. in that case my exchange user send mail to Linux user and internet via Linux smart host,
then I create a receive connector in exchange server for receiving mail from Linux mail system as edge transport custom connector & permission set to anonymous, when Linux user send mail to my exchange user it queued in my exchange message queue and
the error is:
Last Error:A local loop was detected.
What's the problem?

Hi rana78,
As Nathan mentioned, please create Contacts.
Detailed information:
So to avoid NDRs when using shared SMTP namespace you will need to either disable recipient filtering, configure the product to do LDAP queries against all directories that share the namespace, or create Contacts.
More details to see:
How to Share an Email Domain Between Two Mail Systems
http://exchangeserverpro.com/how-to-share-an-email-domain-between-two-mail-systems/
Disclaimer:
Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure
that you completely understand the risk before retrieving any suggestions from the above link.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!

Mouse Clicks stop working randomly

So far I have noticed several times on my Quad Core 27 inch imac that the mouse clicks stop working. This is with two different mice, plugged in together, so I know it's not mouse or driver related. It happens to both of them whenever it does happen.
The only correlation I can make is that it usually happens when I am on a website. I might even have noticed a correlation with "flash based" modules and components on websites, but this could be speculation at this point.
Apple, I love you, but having to hard restart my $2000 computer because the mouse is inoperable is unacceptable. Figure this out. There is no excuse for this. PC's don't do this. I've never had a computer do this in my entire life and words cannot describe how frustrating it is, especially when you are in the middle of trying to get some work done...
-Matt

Try hitting the escape key on the keyboard (ESC). I've noticed that some property sheets, dialogs, and context menus can get 'lost' if you change focus to another program intentionally or accidentally, or if an application 'steals focus' (fairly rare in OS X). You may have to Command + Tab between applications to find where things are 'hung up'. Flash seems especially bad about hanging after a right click tries to call up a context menu.

Adobe Illustrator CS6 has stopped working (random)

I have a problem with Adobe CS6 Illustrator both 32 and 64 bit has this error. It keeps crashing randomly and i get the message Adobe Illustrator has stopped working.
All updates are installed for illustrator.
System specs:
Core i5 2500K
8GB DDR3
Radeon HD6450 512MB
Windows 7 Professional SP1 + all updates
I already reinstalled the whole system but it wont help.
Does anyone know what to do?
Details of windows error log:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-04-11T08:08:39.000000000Z
EventRecordID
6336
Channel
Application
Computer
WS-STUDIO2.mrpresent.local
Security
EventData
Illustrator.exe
16.0.3.691
50bb31df
dvaui.dll
6.0.0.0
509ac3fb
c0000005
0000000000175411
1360
01ce3676fa872485
C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\Illustrator.exe
C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\dvaui.dll
042ca9ac-a27f-11e2-a351-b4b52fb90bc3

Hi,
If you are sure that there is no permission issue than i will suggest you to contact Adobe support.
They will check your log file to find the exact reason for this error. Here is the link below for Adobe support.
http://www.adobe.com/support/chat/ivrchat.html
OR
http://www.adobe.com/company/contact.html

Bluetooth and Built-in keyboards stop working randomly

While I've read several threads about the built-in keyboard on MBPs stop working I've never seen one quite like this. We're on a late 2012 17" MBP, Core i7 with 4GB memory. Randomly both the built-in keyboard on the machine AND the Bluetooth keyboard stop working - but not fully. On both the arrow keys and backspace key still work but nothing else (CMD, space bar, etc).
What's really odd is a USB keyboard works perfectly when this happens. We plugged one in and blamo, it worked just great - but the built-in and the bluetooth ones continued to not work (just as described above).
The user commented that this has been the case on her last 2 machines and both were built from scratch. That leads me to think it's software rather than hardware - I went through everything that was running, shutting down everything I could - with no good results. If you log out/back in (or reboot) that fixes the problem as well (further leading me to software)
Thoughts anyone??
Thanks!
-Ross

Hello RosslnCO2,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Best of luck,
Mario

How can I fix my speakers? They stopped working randomly today.

Today (I don't know the exact time), my speakers on my Macbook Pro stopped working. I don't know if it matters, but today I also got the newest OS X Lion update (not the whole software, just the update for iCloud) and the new iPhoto update 7.1. I've read some people had this problem and a red light was on in the earphone jack, but I didn't see one so I'm posting here. Is there any way I can fix this? I looked at Sound on System Preferences, but no help. If I push the volume buttons, there's no noise, but it adjusts. Is there anything I can do? Thanks!

I had similar problem, and tried everything mentioned in the forums to fix it. Then, randomly, I tried to send an imessage from my iphone to my daughter (who ONLY has imessage through her email, and therefore NO cellular option to receive) and Bingo- a box popped up asking me to sign in to my Apple account. Then it worked fine for everyone. I don't know why it didn't think I was signed in, because I had signed in everywhere- but that was the fix.

Mirror virtual machines between two nas systems

Hello everyone,
I have an esx3.5 server and the vm's are stored in a thecus n5200pro nas using iSCSI. the synchronization module installed in the nas doesn't support iSCSI so I'm trying to find a solution to my problem.
Basically what I need is to mirror the first nas on the second so if the first one fails, I can just change the backup nas ip address and get things working again.
The only solution I found so far (which I'm currently testing) is using win2k3. I installed the ms iscsi initiator and created a mirror between the volumes of the two nas systems. It's currently synchronizing so I don't know if this will work yet.
My question is if there is a better way to handle this job without having to buy additional software. if not, is my current setup going to work?
guido

Hi Pranay,
>>There is a storage server which is added on both the host under as ISCSI array option :-
Do you mean the two hosts are connecting same ISCSI target of the storage server ?
Based on my understanding , shared storage is used for cluster .
Could you please tell us where the VMs is stored ?
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

[SOLVED] Two finger scroll stopped working

Since some update of the last days the two finger vertical scroll of my touchpad stopped working.
I have created a file with the configuratire which be found here: https://wiki.archlinux.org/index.php/To … ed_options
but it does not work.
With
xinput --list-props "PS/2 Elantech Touchpad"
I get this information: http://pastebin.archlinux.fr/584439
Any idea?
Last edited by rogorido (2014-09-12 15:30:20)

\hbar wrote:When updating to xorg-server 1.16, did you check that your configuration files did not get renamed to /etc/X11/xorg.conf.d/50-synaptics.pacsave (see news item https://www.archlinux.org/news/xorg-ser … available/ ) ?
thanks for your answer. I did not have anything in /etc/X11/xorg.conf.d/
In any case: for some reason it's working again without problems.

Synergy between two Arch systems. Stops working randomly. [SOLVED]

Similar Messages

Maybe you are looking for