Syntax error after upgrade to ECC6

Hi,
I have customized infotype and BAPI in SAP 4.6. After upgade to ECC6, my Infotype is working fine, but my BAPI give this error :
The following syntax error was found in the program SAPLZBAPI_HR :
"INCLUDE report "%_HR9000" not found."
If I goto SE38 to recreate %_HR9000, SAP not allow me to continue and appear message "Do not use any special character".
May I know how to resolve this problem ?
Thanks a million.
Regards,
Eric

Hi,
In the ECC6.0 version, it seems that one of the INCLUDE that was generated for that infotype in 4.6 C ending.. with words....HR9000 was not transported or not found for that infotype. Please check all the includes..
In SE38 you can enter the characters like %, so that error is coming
% means LIKE PATTERN ....HR9000 .
Hope you understood.
Regards,
ANJI

Similar Messages

Too many syntax errors after upgrade to ECC 6.0

Hello,
We have made a test upgrade from 4.6C to ECC 6.0. OS --> AIX 5.3; DB --> DB2 8.2. After upgrade we have a lot of syntax errors, why? Anybody has the same problem? Do I must to check all my programs?
Thanks.
Martin

Hello, here there is an example in Z program, but I have seen in no Z programs too with includes or userexits in the second example.
Thanks.
Martin.
first example:
Error in the ABAP Application Program
The current ABAP program "GBT10CO0" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "ZGGBR000 " in include "ZGGBR000
" in
line 279:
""SYST-MODNO" must be a character-type data object (data type C, N, D, "
"T or STRING) ."
second example:
Error in the ABAP Application Program
The current ABAP program "SAPLGBL5" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "GBT10FI0 " in include "GBT10FIB
" in
line 1288:
"The FORM "SEND_CMPLX_DATA_015" does not exist."

Syntax errors after upgrade

Hi,
We have upgraded our development system to BI7.0 SP7 and currently shortdumps in the system when we try to manage/administer the info-providers. The problem seems to be that the interface IF_RSBK_REQUEST has a method GET_DELETABLE which is missing in our system. It is however, present in our sandbox installation and there we have no such issues.
The problem seems to have begun when we tried to implement the note 914938 where SAP shipped some transport requests in a zip file. But we are not sure about this.
We seem to no chance to get the original version of the interface and the implementing classes back.
Did anybody have any such experiences during the upgrade of their systems?
Girish

Hi Girish,
as stated in the OSS note #914938 it is obsolete after the application of SPS 7. With the application of the note you have overwritten part of SPS7.
If you use SNOTE with versioning, you can revert to a version prior to the application of the note.
Otherwise, you most likely have to revert to backup.
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

Syntax error in upgrade

Hi .
How to resolve this syntax error in upgrade 7.0 ?
FIELD-SYMBOLS: <t_zsrm_change> LIKE LINE OF t_zsrm_change.
APPEND <t_zsrm_change> TO change_item.
AT END OF <t_zsrm_change>-logsys.
Error : <t_zsrm_change>-logsys is not defined as field symbol .
But this error doesnt exists in 4.6 c version .
Moderator message: please stop flooding the forum with your upgrade errors, invest some effort to solve these yourself before unloading your work here.
Edited by: Thomas Zloch on Feb 19, 2011 4:31 PM

Hi,
Try writing as :
AT END OF logsys. or AT END OF (<t_zsrm_change>-logsys).
Regards,
Srini.

Flash 9,0,124,0 security error after upgrade

I get the following error after upgrading my Flash Player
(after my system prompted me to install it while running the Flash
editor):
Internet Explorer has blocked this site from using an ActiveX
control in an unsafe manner.
I have uninstalled and reinstalled the player from the
browser, about 5 times now and it continues to be a problem for IE.
Works ok in Firefox if I manually download the FF installer. Is
there a standalone installer for Vista/IE7 or am I forced to use
the ActiveX installer which seems to have issues?

Fix: Removed both (!?more than one?!) versions of flash
player in my Programs and Features dialog, then ran
uninstall_flash_player.exe, reset IE7 to factory spec, then
reinstalled Flash from ActiveX. Seems to be working now.

TS1277 "iPhoto was unable to connect to Photo Stream" error after upgrading to mountain lion

Has anyone gotten this error after upgrading to mountain lion on a computer that already had a user setup on it?
My iphoto was working with photostream and now it will not connect at all.
I ran fix disk permissions and once it showed up in iphoto, photostream was loading and then it disappeared again.
help!

FWIW I fixed mine when I realised I'd probably downloaded iPhoto using an AppleID from the App Store but logged into iCloud with a different AppleID. I deleted iPhoto and it's related files (but not the iPhoto Library) using CleanApp, entered the App Store with my usual AppleID and downloaded iPhoto again. Once the App Store, the downloaded iPhoto and iCloud logins were the same iPhoto Stream worked again.

Error after upgrade CRS 4.0.4SR1 to 4.0.5SR2

Hi,
I've got some errors after upgrading my CRS 4.0.4SR1 cluster to 4.0.5SR2.
First my publisher's status stay in "patch" status for near 2 days now. I'm not able to change anything in the configuration, i've got this message "Config Changes are not allowed during 'Patch' operation, which was started by '_ccbu_build' at 'Thu Apr 08 04:31:04 CEST 2010 '. Please try again after 'Patch' is complete."(ERREUR02.jpg). How can I change this status?
Then I've got errors in historical DB which is working but not on the publisher only on subscriber. How can I resynchronize this DB?
Thanks for your help.

Thanks Tammy for the reply
We already tried the suggested SAP Note couple of time without any luck.
Regards,
SJ

Error after upgrading from sap b1 pl 35 to pl 49

hello sap experts
iam getting the following error after upgrading from sap b1 pl 35 to pl 49 this error is coming if we have given round off or discount in the below cell
"Discount deviates from authorised ranges (sales oreder-discount%for document) [message 439-15] pls make it as soon as possible an i will be thankful to those guys .
regards
Jenny

Hello Jenny,
You may check by supreuser account first to see if you got the same error. If not, it probably just related to user authorization. If yes, it must be a bug.
Thanks,
Gordon

Paym.guar.proc. Field is Disable after Upgrade to ECC6

Hi All,
Would like to have your guide and opinion which Paym.guar.proc. Field is Disable after Upgrade to ECC6.
Thank you in advance.

Hi Lakshmipathi,
As per checked, only SO to DO document created only.
We have implemented below change Note : 1736052 with change of SAPMV50A2112, I/O field LIKP-ABSSC from output field to input field that was working fine.
Please let us know you have any feedback on it.
1736052 - Entering the payment guarantee procedure in delivery note
Trevor Wong.

After upgradation to ECC6.0 two fields in report not showing

Hi,
While running Z report Vendor and Material Description is not appearing.This problem is faced after upgradation to ECC6.0.In 4.6C it was showing in detailed. Is there any reports for settlement document having material & vendor code with description.
Regards
Nitin A

Hi Mohamed,
Thanks a lot for your immidiate reply.
Is there any reports for settlement document having material & vendor code with description.
Regards
Nitin

What can I do if I get an internal power error after upgrading to Windows 10?

QuestionWhat can I do if I get an internal power error after upgrading to Windows 10?
AnswerSome laptops with AMD graphics that upgraded to Windows 10 are showing blue screens with error messages regarding Internal_Power_Error. If you receive this error, try the procedure in this article.
First, you'll need to quickly set the boot options to Safe Mode:
1. Hold the Windows key and press 'R' to open the run box.
2. Type MSCONFIG, then press ENTER.
3. Select the BOOT tab.
4. Under BOOT OPTIONS, check Safe boot, then select Minimal.
5. Click Apply, then OK.
6. Click Restart. (If prompted, click Restart anyway.)
From Safe Mode disable the AMD Display Driver:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Disable, then click Yes to confirm.
7. Click Close.
8. Hold the Windows key and press the 'R' key to open the run box.
9. Type MSCONFIG, then press ENTER.
10. Select the BOOT tab.
11. Uncheck Safe boot.
12. Click Apply, then OK.
13. Click Restart. (If prompted, click Restart anyway.)
From Windows 10 started with the AMD Display Driver disabled:
1. Hold the Windows key and press the 'X' key to open a menu in the lower-left.
2. Click Device Manager.
3. Expand Display adapters to show the two display adapters.
4. Double click AMD Radeon R9 M200X Series.
5. Select the Driver tab.
6. Click Update Driver.
7. Click Search automatically for updated driver software.
8. An AMD driver should be found and installed.
The driver that originally caused this problem is AMD display driver version 15.200.1046.2 dated 7/15/2015.
The driver installed through this process might have an older date, such as 15.200.1055.0 dated 7/6/2015. That's okay.

I'm having the same problem. I got error message 21. I went to apple store. they are saying i have a hardware error. Really, my phone was working before the update. Asked me for $150 to get another one when I am due to get a new one and wanted to pass this one on to my child.
Help please,
I will be glad to go back to the older software update

Imac error after upgrade to 10.8.4

I received an error after upgrade tp brand new imac. Error was upgrade was not installed. Upon reboot the version of SW in About thi Mac is 10.8.4. Bug?
iMac i7, 21.5" 16GB memory, fusion drive.
Thanks for input. I assume the upgrade took.

Verify Permissions gave me some errors, I deleted the repeats and the permissions fixed lines:
Repairing permissions for “Macintosh HD”
Warning: SUID file “System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig” has been modified and will not be repaired.
Warning: SUID file “usr/lib/sa/sadc” has been modified and will not be repaired.
Warning: SUID file “usr/bin/quota” has been modified and will not be repaired.
+++ (multiple repairs)
Permissions repair complete
I verfied the HD
Much text (removed)...
The volume Macintosh HD appears to be OK.
I also loaded the Apple downloads version of the upgarde and received the following (again):
The Installation failed
The insatllation encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Message was edited by: Steve51K

IDOC Syntax Error E0072 with status 26 after upgrade to ECC6.0

Hi
We have upgraded SAP R/3 from 4.6C to ECC6.0. After upgrade, when we create PO and output EDI, we are seeing this IDOC syntax error E0072 for Mandatory Segment E1EDK01. In 4.6C it was working fine with no issues, only after upgrade this problem started. It says E1EDK01 is missing which is mandatory. We are using basic type ORDERS01 with no extensions. When we see WE30 it looks fine, WE20 settings looks fine.
Order of the segments got scrambled in upgraded version. First segment is E1EDP19001, this is supposed to be under E1EDP01 segment. There are two E1EDP19001 segments created but there were no sub segments to E1EDP01.
Any help in this regard is highly appreciated.
Thanks
Pandiri

User Exit activation and fixing the issue in user exit fixed this issue.

Error in text formatting after upgrade to ECC6.0

Hi all,
After upgrading from 4.6C to ECC6.0, we encountered the error "The SD_WORD_PROCESSING function module is for creating the "Maintain Text" dialog box. It seems that after upgrade, some of the text procedure in the configuration is missing. Did anybody encounter this problem? Please advise.
Thanks.

Hi Mei,
Welcome to SDN.
It seems the customizing for the texts (Transaction VOTX) is incomplete.
Please check OSS Notes 150775 and 751690 for more detail information.
Regards,
Ferry Lianto
Please reward points if helpful.

Syntax error after upgrade to ECC6

Similar Messages

Maybe you are looking for