"SYNTAX_ERROR" error in program "SAPLMG21"
Hi,
When i am trying to execute a transaction MM01/MM02/ME21/ME21N(All MM transactions), i am getting a runtime error as follows.
Runtime Errors SYNTAX_ERROR
Date and Time 21.04.2008 15:15:04
What can you do?
Please eliminate the error by performing a syntax check (or an extended program check) on the program "SAPLMG21 ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look at and manage termination messages, and you can also keep them for a long time.
*Error analysis*
The following syntax error was found in the program SAPLMG21 :
"The Dictionary structure or table "MARU" is either not active or does not exist."
For this, I am trying to send a message to SAP. But it is asking an application component name.
Can you please help me in knowing an application component or the way to resolve this issue.
Kindly advice,
Thanks & Regards,
Mogileeswar
Hello Chanti,
MM or BC either of these 2 will go. But did you check MARU. What if one of your smart developers has done some tampering?
Regards.
Ruchit.
Similar Messages
-
SYNTAX_ERROR unable to log in to SAP system Syntax error in program "SAPMSE
hi SAP Experts,
I have applied Basis patch 12 and I scheduled the background. Backgroud job was terminated. System became slow. Then I stopped the server and restarted. Now, I am unable to log in to SAP GUI by entering Username and Password and getting syntax error.
Syntax error in program "SAPMSEM1".
What happened?
Error in the ABAP Application Program
The current ABAP program '????????????????????????????"
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occured in program "SAPMSEM1" in include
"CL_SALV_FORM_ELEMET==========CU" in
line 13:
"the type "IF_SALV_FORM_CONFIG" is unknown."
The include has been created and last changed by:
Created by: "SAP "
Last Changed by: "SAP "
I am unable to access any transction code.
Please help me..
Thanks in advance...
Rajuhi,
Thanks for your response.
i haven't take any back up. can u pls tell me step by step procedure to implement the SP with TP.
your answer will be helpful..
Regards
Raju -
Syntax error in program "SAPLOCS_LOG ". for SPAM
Hi Team ,
I have updated SPAM from 730 45 to 730 51 after that i am trying to update SPS from spam , it is throwing the below error .
Category
ABAP Programming Error
Runtime Errors
SYNTAX_ERROR
ABAP Program
SAPLOCS_LOG
Application Component BC-UPG-OCS
Date and Time
07.04.2014 18:21:55
Short text
Syntax error in program "SAPLOCS_LOG ".
What happened?
Error in the ABAP application program.
The current ABAP program "SAPLOCS_UI" had to be interrupted because it contains
a statement that cannot be executed.
In the include "LOCS_LOGU15 " in the line 97 of program "SAPLOCS_LOG " the
following syntax
errors occur:
"The data object "LS_PATHISTQ" does not have a component called "PRE_VR"
"S"."
Author and last person to change the include are:
Author "SAP "
Last changer "SAP "
Error analysis
The following syntax error was found in the program SAPLOCS_LOG :
"The data object "LS_PATHISTQ" does not have a component called "PRE_VR"
"S"."
Help is much appreciated .
Thanks,
Pradeep.Hi ,
After full restart of the system also there is no use , even i tried to upgrade to 52 .
It is throwing dump .
Category
ABAP Programming Error
Runtime Errors
SYNTAX_ERROR
ABAP Program
SAPLOCS_LOG
Application Component BC-UPG-OCS
Date and Time
07.04.2014 23:32:43
Short text
Syntax error in program "SAPLOCS_LOG ".
What happened?
Error in the ABAP application program.
The current ABAP program "SAPLOCS_UI" had to be interrupted because it contains
a statement that cannot be executed.
In the include "LOCS_LOGU15 " in the line 97 of program "SAPLOCS_LOG " the
following syntax
errors occur:
"The data object "LS_PATHISTQ" does not have a component called "PRE_VR"
"S"."
Author and last person to change the include are:
Author "SAP "
Last changer "SAP "
Help is really much appreciated ..
Thanks,
Pradeep. -
Syntax error in program "SAPLHTTPTREE " during application of SAPKB70012
Hi everyone,
I am applying support pack SAPKB70012 when it stopped in the XPRA_EXECUTION phase. Anybody encountered this error "Syntax error in program "SAPLHTTPTREE "? Been looking for any notes on this but haven't found anything. I already created message to SAP but even though its high, nobody's picking it up. We're using Windows NT and database MSSQL.
Below is part of the import queue log:
The following details help you to analyze the problem:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return code: 0012
- Error message: OCS Package SAPKB70012, tp step R, return code
0012
Notes on phase XPRA_EXECUTION
The XPRAs and after-import methods are executed in this phase. This
phase can terminate due to the following reasons:
o TP_INTERFACE_FAILURE: The system was unable to call the tp
interface.
o TP_FAILURE: The system was unable to execute the tp program. For
more information, see the SLOG or ALOG log file.
When I check SM37, I found this ABAP runtime error:
*job: RDDEXEC
Runtime Errors SYNTAX_ERROR
Date and Time 16.01.2008 19:13:09
Short text
Syntax error in program "SAPLHTTPTREE ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSCTS_EXE_EXP" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLHTTPTREE " in include
"LHTTPTREETOP " in
line 9:
""ICFALIAS" must be a flat structure. You cannot use internal tables, s"
"trings, references, or structures as components ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLHTTPTREE ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program SAPLHTTPTREE :
""ICFALIAS" must be a flat structure. You cannot use internal tables, s"
"trings, references, or structures as components ."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
User and Transaction
Client.............. 000
User................ "DDIC"
Language key........ "E"
Transaction......... " "
Transactions ID..... "0224C4DC1741F1C28D9D001A4BDB2C98"
Program............. "SAPLSCTS_EXE_EXP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "SAPLSCTS_EXE_EXP" - in
"CALL_IMP_METHODS_IN_CLIENT".
The main program was "RDDEXECU ".
In the source code you have the termination point in line 351
of the (Include) program "LSCTS_EXE_EXPF02".
The program "SAPLSCTS_EXE_EXP" was started as a background job.
Job Name....... "RDDEXECL"
Job Initiator.. "DDIC"
Job Number..... 19130500
Source Code Extract
Line
SourceCde
321
CLEAR: sy-msgid, sy-msgty, sy-msgno.
322
323
IF ps_spec_pars-with_data_file EQ 'X'.
324
CALL FUNCTION ps_method_call-method_fb
325
EXPORTING
326
iv_tarclient = ps_client-client
327
iv_is_upgrade = pv_is_upgrade
328
iv_datafile = ps_spec_pars-data_file
329
TABLES
330
tt_e071 = lt_e071
331
tt_e071k = lt_e071k.
332
ELSEIF ps_spec_pars-with_asynch_mode EQ 'X'.
333
CALL FUNCTION ps_method_call-method_fb
334
EXPORTING
335
iv_tarclient = ps_client-client
336
iv_is_upgrade = pv_is_upgrade
337
iv_asynchronous = ps_spec_pars-asynch_mode
338
TABLES
339
tt_e071 = lt_e071
340
tt_e071k = lt_e071k.
341
ELSEIF ps_spec_pars-with_cl_results EQ 'X'.
342
CALL FUNCTION ps_method_call-method_fb
343
EXPORTING
344
iv_trkorr = pv_trkorr
345
iv_is_upgrade = pv_is_upgrade
346
it_e071 = lt_e071
347
it_e071k = lt_e071k
348
CHANGING
349
it_client = ps_spec_pars-clients.
350
ELSE.
>>>>>
CALL FUNCTION ps_method_call-method_fb
352
EXPORTING
353
iv_tarclient = ps_client-client
354
iv_is_upgrade = pv_is_upgrade
355
TABLES
356
tt_e071 = lt_e071
357
tt_e071k = lt_e071k.
358
ENDIF.
359
360
361
reset info on called method in memory.
362
CALL FUNCTION 'TRINT_RESET_STACK_KILLER'.
363
check if method call has deleted variables in global memory
364
and set those variables again
365
CALL FUNCTION 'TRINT_CHECK_VARS_IN_MEMORY'
366
IMPORTING
367
ev_ok = lv_ok.
368
IF lv_ok = ' '.
369
memory destroyed: set all clients to errornous for security
370
for methods of switch framework
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
2
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Execute Post-Import Methods and XPRAs for Transport Request
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
ASYNCH_IAC_PUBLISH
SY-MSGV2
0011
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080116
SY-UZEIT
191309
SY-XPROG
SAPLSYST
SY-XFORM
SYSTEM_HOOK_OPEN_DATASET
Active Calls/Events
No. Ty. Program Include Line
Name
5 FUNCTION SAPLSCTS_EXE_EXP LSCTS_EXE_EXPF02 351
CALL_IMP_METHODS_IN_CLIENT
4 FORM SAPLSCTS_EXE_EXP LSCTS_EXE_EXPF02 351
CALL_IMP_METHODS_IN_CLIENT
3 FORM SAPLSCTS_EXE_EXP LSCTS_EXE_EXPF02 87
CALL_IMP_METHODS
2 FUNCTION SAPLSCTS_EXE_EXP LSCTS_EXE_EXPU02 103
TRINT_CALL_AFTER_IMP_METHOD
1 EVENT RDDEXECU RDDEXECU 171
START-OF-SELECTION
Chosen variables
Name
Val.
No. 5 Ty. FUNCTION
Name CALL_IMP_METHODS_IN_CLIENT
GC_GNS_NO_DIFF
/0*/
2322222222
F0AF000000
0000000000
0000000000
LT_E071
Table IT_137[21x360]
FUNCTION-POOL=SCTS_EXE_EXPFORM=CALL_IMP_METHODS_IN_CLIENTDATA=LT_E071
Table reference: 46
TABH+ 0(20) = B0A6D957FE07000050C8D957FE07000000000000
TABH+ 20(20) = 2E000000890000001500000068010000FFFFFFFF
TABH+ 40(16) = 044D0000F00B000015000000C9248001
store = 0xB0A6D957FE070000
ext1 = 0x50C8D957FE070000
shmId = 0 (0x00000000)
id = 46 (0x2E000000)
label = 137 (0x89000000)
fill = 21 (0x15000000)
leng = 360 (0x68010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000049
occu = 21 (0x15000000)
access = 1 (ItAccessStandard)
idxKind = 1 (ItIndexLinear)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xF0C0E257FE070000
pgHook = 0x0000000000000000
idxPtr = 0x10A7D957FE070000
shmTabhSet = 0x0000000000000000
id = 111 (0x6F000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 21 (0x15000000)
lineAlloc = 21 (0x15000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
>>>>> 1st level extension part <<<<<
regHook = 0x90C4D957FE070000
collHook = 0x0000000000000000
ext2 = 0x0000000000000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
GC_GNS_NO_SPECIFIC
2222222222
FAF0000000
0000000000
0000000000
LT_E071K
Table[initial]
RELSET
RNO
544
2EF
000
000
PS_SPEC_PARS-WITH_CL_RESULTS
2
0
0
0
SY-XPROG
SAPLSYST
5454555522222222222222222222222222222222
310C393400000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
PS_METHOD_CALL-METHOD_FB
SICF_AFTER_IMPORT
544454454554454552222222222222
3936F16452F9D0F240000000000000
000000000000000000000000000000
000000000000000000000000000000
GC_PARTNRPR_BACK_TO_STNDRD
1A&1B&1H&1I&2I&3R
34234234234234235
11612618619629632
00000000000000000
00000000000000000
PV_IS_UPGRADE
2
0
0
0
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PV_TRKORR
SAPKB70012
54544333332222222222
310B2700120000000000
00000000000000000000
00000000000000000000
SYST-REPID
SAPLSCTS_EXE_EXP
5454545554545455222222222222222222222222
310C3343F585F580000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
DEVC_PREFIXNS
N
4
E
0
0
PS_SPEC_PARS-CLIENTS
Table[initial]
%_PRINT
000 0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PS_CLIENT-CLIENT
222
000
000
000
%_DUMMY$$
2222
0000
0000
0000
No. 4 Ty. FORM
Name CALL_IMP_METHODS_IN_CLIENT
LT_E071
Table IT_137[21x360]
LT_E071K
Table[initial]
PS_SPEC_PARS-WITH_CL_RESULTS
2
0
0
0
PS_METHOD_CALL-METHOD_FB
SICF_AFTER_IMPORT
544454454554454552222222222222
3936F16452F9D0F240000000000000
000000000000000000000000000000
000000000000000000000000000000
PV_IS_UPGRADE
2
0
0
0
PV_TRKORR
SAPKB70012
54544333332222222222
310B2700120000000000
00000000000000000000
00000000000000000000
PS_SPEC_PARS-CLIENTS
Table[initial]
PS_CLIENT-CLIENT
222
000
000
000
No. 3 Ty. FORM
Name CALL_IMP_METHODS
PV_TRKORR
SAPKB70012
54544333332222222222
310B2700120000000000
00000000000000000000
00000000000000000000
PV_NO_WORK_FOUND
2
0
0
0
PT_CLIENT
Table IT_21[1x8]
PROGRAM=RDDEXECUDATA=GT_CLIENT
Table reference: 16
TABH+ 0(20) = B0311757FE070000000000000000000000000000
TABH+ 20(20) = 10000000150000000100000008000000FFFFFFFF
TABH+ 40(16) = 040000009008000010000000C1248001
store = 0xB0311757FE070000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 16 (0x10000000)
label = 21 (0x15000000)
fill = 1 (0x01000000)
leng = 8 (0x08000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000031
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x10311757FE070000
pgHook = 0x0000000000000000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 20 (0x14000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
LS_CLIENT_H
2222
0000
0000
0000
TTRA
T
5
4
0
0
SY
######################################f#######################################T######### ####
0000000000000000000000000000000000000060000000000000000000000000000000000000105000000080220000
0000104000000000000010201000100000000060000000000000000000000000000000000000604000000000000300
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000070000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000C
PV_UPDATE_LOCKFLAG
X
5
8
0
0
PV_CTC
2
0
0
0
PV_STATLOG_FILE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PS_METHOD_CALL
AFTER_IMP SICF_AFTER_IMPORT ###Á#>#À#?###@#
44545544525444544545544545522222222222222000C030C0309040
16452F9D003936F16452F9D0F240000000000000000010E000F0F000
00000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000
PV_IS_UPGRADE
2
0
0
0
PV_TOP_LEVEL
2
3
2
0
0
PS_SPEC_PARS
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PS_METHOD_CALL-CLIDEP
2
0
0
0
PS_SPEC_PARS-WITH_CL_RESULTS
2
0
0
0
%_VIASELSCR
0
4
No. 2 Ty. FUNCTION
Name TRINT_CALL_AFTER_IMP_METHOD
IS_E070
SAPKB70012 DRSAP SYSTSAPUSER 20080116185743
5454433333222222222245545222222255555455545222223333333333333322222222222222222222
310B270012000000000042310000000039343105352000002008011618574300000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
IT_E071
Table IT_15[23207x360]
PROGRAM=RDDEXECUDATA=E071_TAB[]
Table reference: 10
TABH+ 0(20) = C0841857FE070000B0611757FE07000000000000
TABH+ 20(20) = 0A0000000F000000A75A000068010000FFFFFFFF
TABH+ 40(16) = 04000000C005000010000000C1248001
store = 0xC0841857FE070000
ext1 = 0xB0611757FE070000
shmId = 0 (0x00000000)
id = 10 (0x0A000000)
label = 15 (0x0F000000)
fill = 23207 (0xA75A0000)
leng = 360 (0x68010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000016
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x206E1857FE070000
pgHook = 0x30047F57FE070000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 14 (0x0E000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 32752 (0xF07F0000)
lineAlloc = 23216 (0xB05A0000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
collHook = 0x0000000000000000
ext2 = 0x40611757FE070000
>>>>> 2nd level extension part <<<<<
tabhBack = 0xD0C31F57FE070000
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
IT_E071K
Table IT_16[6045x564]
PROGRAM=RDDEXECUDATA=E071K_TAB[]
Table reference: 11
TABH+ 0(20) = 20851857FE070000F0611757FE07000000000000
TABH+ 20(20) = 0B000000100000009D17000034020000FFFFFFFF
TABH+ 40(16) = 040000005006000010000000C1248001
store = 0x20851857FE070000
ext1 = 0xF0611757FE070000
shmId = 0 (0x00000000)
id = 11 (0x0B000000)
label = 16 (0x10000000)
fill = 6045 (0x9D170000)
leng = 564 (0x34020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000019
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x00C49357FE070000
pgHook = 0x60E75357FE070000
idxPtr = 0x0000000000000000
shmTabhSet = 0x0000000000000000
id = 15 (0x0F000000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 8192 (0x00200000)
lineAlloc = 6048 (0xA0170000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = 0x0000000000000000
collHook = 0x0000000000000000
ext2 = 0xE06F1757FE070000
>>>>> 2nd level extension part <<<<<
tabhBack = 0x806F1757FE070000
delta_head = 0000000000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x0000000000000000
pb_handle = 0x0000000000000000
IV_CTC
2
0
0
0
IV_DATNAME
:D:T:S:data:F:IB70012.SAP
3435353667634344333332545222222222222222222222222222222222222222222222222222222222222222222222
A4A4A3A4141A6A9270012E310000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IV_SFW_CALL
2
0
0
0
IV_STATLOG_FILE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IV_TRKORR
SAPKB70012
54544333332222222222
310B2700120000000000
00000000000000000000
00000000000000000000
IV_UPDATE_LOCKFLAG
X
5
8
0
0
IT_CLIENT
Table IT_21[1x8]
LS_SPEC_PARS-NOT_DURING_UPGRADE
2
0
0
0
ALLSTAT
RNODL
54444222222222222222222222
2EF4C000000000000000000000
00000000000000000000000000
00000000000000000000000000
LV_UPGRADE_IS_RUNNING
2
0
0
0
TMVD
E
4
5
0
0
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
<LS_METHOD_CALL>
AFTER_IMP SICF_AFTER_IMPORT ###Á#>#À#?###@#
44545544525444544545544545522222222222222000C030C0309040
16452F9D003936F16452F9D0F240000000000000000010E000F0F000
00000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000
LV_IS_UPGRADE
2
0
0
0
LV_TOP_LEVEL
2
3
2
0
0
LV_NO_WORK_FOUND
2
0
0
0
LS_SPEC_PARS
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SPACE
2
0
0
0
No. 1 Ty. EVENT
Name START-OF-SELECTION
SCREEN
%_17NNS0000691660_%_%_%_%_%_%_
2533445333333333352525252525252222222222222222222222222222222222222222222222222222222222222222
5F17EE30000691660F5F5F5F5F5F5F0000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST
######################################f#######################################T######### ####
0000000000000000000000000000000000000060000000000000000000000000000000000000105000000080220000
0000104000000000000010201000100000000060000000000000000000000000000000000000604000000000000300
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000070000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000C
GT_CLIENT
Table IT_21[1x8]
GS_CLIENT
2222
0000
0000
0000
DATNAME
:D:T:S:data:F:IB70012.SAP
3435353667634344333332545222222222222222222222222222222222222222222222222222222222222222222222
A4A4A3A4141A6A9270012E310000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_DATNAME_%_APP_%
Data File Name (from TRBAT)
467624666246662267662554452222
4141069C50E1D50862FD0422149000
000000000000000000000000000000
000000000000000000000000000000
E071_TAB[]
Table IT_15[23207x360]
E071K_TAB[]
Table IT_16[6045x564]
SY-SUBRC
0
0000
0000
GV_CTC
2
0
0
0
GV_TRBAT_DATNAME
:D:T:S:data:F:IB70012.SAP
3435353667634344333332545222222222222222222222222222222222222222222222222222222222222222222222
A4A4A3A4141A6A9270012E310000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
<%_TABLE_E071>
<%_TABLE_E071K>
GV_STATLOG_FILE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
COMFILE
SAPKB70012
54544333332222222222
310B2700120000000000
00000000000000000000
00000000000000000000
SY-LANGU
E
4
5
0
0
SY
######################################f#######################################T######### ####
0000000000000000000000000000000000000060000000000000000000000000000000000000105000000080220000
0000104000000000000010201000100000000060000000000000000000000000000000000000604000000000000300
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000070000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000C
SPACE
2
0
0
0
Internal notes
The termination was triggered in function "ab_genprog"
of the SAP kernel, in line 1476 of the module
"//bas/700_REL/src/krn/runt/abgen.c#5".
The internal operation just processed is "FUNC".Good Morning
Did you ever get this working without restoring ?
Kind Regards
Marius -
Syntax error in program "HINCALC0 ".
Hi,
After applying the Snote -1474958 along with the Prerequisties (Snote -1455387,1425161,1452218,1456076,1459813,1459875,1475735), when we exec the TC PC00_M40_CALC we are getting the abap dump.
Runtime Errors SYNTAX_ERROR
Date and Time 23.08.2010 13:06:31
ShrtText
Syntax error in program "HINCALC0 ".
What happened?
Error in ABAP application program.
The current ABAP program "????????????????????????????????????????" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "HINCALC0 ", the following syntax error occurred
in the Include "PCSECIN0 " in line 155:
"Field "80CCF_DEDMT" is unknown. It is neither in one of the specified "
"tables nor defined by a "DATA" statement. "DATA" statement."
Author and last person to change the Include are:
Author "SAP "
Last changed by "BASIS_USER "
Error analysis
In program "HINCALC0 ", the following syntax error occurred:
"Field "80CCF_DEDMT" is unknown. It is neither in one of the specified "
"tables nor defined by a "DATA" statement. "DATA" statement."
Trigger Location of Runtime Error
Program ????????????????????????????????????????Hi Ramana,
While applying the snote we are getting error below
Yellow light for the status Object PCFDCIN0- Corrections incompletly copied:see change display.
Green Light for the Status Object PSDECIN0 - Changes Can be copied
Green Light for the Status Object PSDECIN1 - Changes Can be copied
Regards,
KARAN. -
St22 dump : Syntax error in program "SAPLCRM_KNOWLEDGE ".
Hello experts,
When i click on Define Template for folder in SPRO ( spro -> customer relation relationship management>
basic function --> content management ---> define template for folder) it goes to dump.
Runtime Errors SYNTAX_ERROR
Short text :Syntax error in program "SAPLCRM_KNOWLEDGE ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSVIM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLCRM_KNOWLEDGE " in include
"LCRM_KNOWLEDGEF03 " in
line 71:
""ICFALIAS" must be a flat structure. You cannot use internal tables, s"
"trings, references, or structures as components. -"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLSVIM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program SAPLCRM_KNOWLEDGE :
""ICFALIAS" must be a flat structure. You cannot use internal tables, s"
"trings, references, or structures as components. -"
The version of CRM is crm 2007 with support stack sp02
Regards
RanadhirThanks Venkataramanan, after the implementing the note 1117598 and 1101434 the problem solved.
Regards
Ranadhir -
SAP_CCMS_MONI_BATCH_DP getting cancelled with error in program SAPLSPFL
Hi Experts,
The job SAP_CCMS_MONI_BATCH_DP scheduled by user DDIC is getting cancelled everyday at 20:00 CET (system time).
The reason for the job getting cancelled with the runtime error Syntax error in program SAPLSPFL and a short dump is generated.
Runtime Errors SYNTAX_ERROR
Date and Time 07.03.2012 20:24:50
Short text
Syntax error in program "SAPLSPFL ".
As per instructions I did syntax check for Program SAPLSPFL . It shows syntactical error as shown below.
The following syntax error occurred in program "SAPLSPFL " in include "LSPFLF07
" in
line 148:
"Bei PERFORM bzw. CALL FUNCTION "SET_DIRVALUE" ist der Aktualparameter "
""DIR_VALUES-DIR_ROLL" zum Formalparameter "DIR_VALUE" inkompatibel."
Please help me on this.hi
check out this SAP Note
1000897 RZ10 profile import: Maximum path length is 60 characters -
Syntax Error in program "/BDL/SAPLBDL11"
Hi,
I have installed ST-PI and ST-A/PI Add-ons with latest Support Patches in our BI7.01 environment. after that i have configured SDCCN successfully in Development environment but when i am trying to configure SDCCN in Quality environment, i am getting Syntax_Error for program /BDL/SAPLBDL11. Due to this error i am not able to create SDCC_OSS RFC also not able to activate batch jobs /BDL/TASK_PROCESSOR.
Following is the brief detail of error.
===================================================================================
SYNTAX_ERROR
Short text
Syntax error in program "/1BCDWBEN/SAPL/BDL/EN0000 ".
What happened?
Error in the ABAP Application Program
The current ABAP program "/BDL/SAPLBDL11" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1BCDWBEN/SAPL/BDL/EN0000 " in
include "/1BCDWBEN/L/BDL/EN0000U01 " in
line 41:
"Field "ALL_" is unknown. It is neither in one of the specified tables "
"nor defined by a "DATA" statement. "DATA" statement."
The include has been created and last changed by:
Created by: "DDIC "
Last changed by: "DDIC "
Error in the ABAP Application Program
The current ABAP program "/BDL/SAPLBDL11" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
========================================================================================
Thanking you
Regards
PranavDear Pranav
I think you have done the upgradation to EHP3 , In order to Fix this issue would you please try to activated the lock object /ISDFPS/EALESYS , ENQUEUE_/ISDFPS/EALESYS and DEQUEUE_/ISDFPS/EALESYS in transaction SE11
I am sure this will fix that issue.
Best Regards
Jai Wardhan -
Getting short dumps "Sysntax error in program SAPLDNO_SAP
Could anyone have idea what is it about
This what I am getting on st22
untime Errors SYNTAX_ERROR
Date and Time 22.09.2008 06:49:28
Short text
Syntax error in program "SAPLDNO_SAP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "RNOTIFUPDATE01" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLDNO_SAP " in include
"AI_SDK_GET_SAPNET_USER_ID=====E " in
line 24:
"The field "P_GUIDH" is unknown, but there is a field with the similar "
"name "LV_GUIDH". "LV_GUIDH"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "DDIC "
Error in the ABAP Application Program
The current ABAP program "RNOTIFUPDATE01" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLDNO_SAP ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program SAPLDNO_SAP :
"The field "P_GUIDH" is unknown, but there is a field with the similar "
"name "LV_GUIDH". "LV_GUIDH"."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
| -
Unable to login in the system ---- Syntex Error is Program SAPLSFES
Hi,
We have Sol_Man 7(N/W 700) in Win2003 and MSSQL 2005.
During Support pack SAPKB70014 application in our Soloution Manager, I have continued all the step in Dialog but today it shows a message that "Inform SAP system for tp termination".The SP application was running for almost 12-14hrs.
Then I restart my SAP system.Now when I opening SAP GUI
Message is comming
ABAP Runtime Error Error Code <no erorr name or code was mentioned >
In bottom of the page messege is comming
" Syntex Error is Program SAPLSFES "
Login name & password not asking.
I also found in the Slog that
"WARNING: Background job RDDIMPDP could not be started or terminated abnormally."
In SAPIB70014
2EETW000 sap_dext called with msgnr "1":
2EETW000 -
db call info -
2EETW000 function: db_xrtab
2EETW000 fcode: RT_MI_LOAD
2EETW000 tabname: SPROXHDR
2EETW000 len (char): 1740
2EETW000 key: CLASCX_SERVICES_REGISTRY_SIPUBLIS8 CLASCX_SERVICES_REGISTRY_SIPUBLIS82F7E61BA8717B7CD295188A843F6CB8E97F12D39
2EETW000 retcode: 1
2EETW125 SQL error "1105" during "" access: "[1105] Could not allocate space for object 'dbo.SPROXHDR'.'SPROXHDR~HAS' in database 'SM1' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup."
I also checked and found that TRBAT table contains only header information where as TRJOB table is empty.
Also found tp.exe in Task Manager.
I have already created a message with SAP.
Please guide me in this regard.
Regards,
ParthaWARNING: Background job RDDIMPDP could not be started or terminated abnormally."
login into Client 000 and schedule the background job again.
Could not allocate space for object 'dbo.SPROXHDR'.'SPROXHDR~HAS' in database 'SM1' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup."
Check the database space also. i think there is some space problem also, you need to add some space or need to add datafile.
Regards,
Subhash -
Syntax error in program "SAPLXRSA " -SENT
Hi Guys,
I have done user exit in R/3 datasource when I do the test extraction using RSA3 and geting the data without any error. I've transport the requet to Test Box and tried to do the extraction in TestBox and getting the below SYNTAX Error message. Kindly advise it's very URGET. Thanks in advance.
ShrtText
Syntax error in program "SAPLXRSA ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLRSAP" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLXRSA ", the following syntax error occurred
in the Include "ZXRSAU01 " in line 21:
"Field "ZOXPRO0043" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
Author and last person to change the Include are:
Author "SAPCHEOLENG "
Last changed by "CCEV200 "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLXRSA ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
In program "SAPLXRSA ", the following syntax error occurred:
"Field "ZOXPRO0043" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "hawk"
Network address.......... "137.132.12.22"
Operating system......... "HP-UX"
Release.................. "B.11.23"
Hardware type............ "ia64"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "hawk"
Database type............ "ORACLE"
Database name............ "QAS"
Database owner........... "SAPR3"
Character set............ "en_US.iso88591"
SAP kernel............... "640"
Created on............... "Oct 16 2006 20:35:55"
Created in............... "HP-UX B.11.23 U ia64"
Database version......... "OCI_920 "
Patch level.............. "153"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "HP-UX B.11"
Memory usage.............
Roll..................... 16128
EM....................... 12569760
Heap..................... 0
Page..................... 65536
MM Used.................. 1716768
MM Free.................. 2470608
SAP Release.............. "640"
User and Transaction
Client.............. 220
User................ "CCEENGG"
Language key........ "E"
Transaction......... "RSA3 "
Program............. "SAPLRSAP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLRSAP" in
"CALL_DATA_CUSTOMER_FUNCTION".
The main program was "RSFHGEN2 ".
The termination occurred in line 96 of the source code of the (Include)
program "LRSAPF06"
of the source code of program "LRSAPF06" (when calling the editor 960).
Source Code Extract
Line
SourceCde
66
CALL FUNCTION BW_BTE_CALL_BW204010_E
67
EXPORTING
68
I_DATASOURCE = L_DATASOURCE
69
I_UPDMODE = P_UPDMODE
70
TABLES
71
I_T_SELECT = P_T_SELECT
72
I_T_FIELDS = P_T_FIELDS
73
C_T_DATA = P_T_DATA
74
C_T_MESSAGES = L_T_MESSAGES
75
EXCEPTIONS
76
OTHERS = 1.
77
DESCRIBE TABLE P_T_DATA LINES L_LINES.
78
MESSAGE S408 WITH L_LINES.
79
Handle BTE-Exit error messages
80
IF SY-SUBRC <> 0.
81
P_SUBRC = SY-SUBRC.
82
IF 1 = 2. MESSAGE E021 WITH ''. ENDIF.
83
MESSAGE_WRITE 'E' 'R3' '021' 'BW_BTE_CALL_BW204010_E' '' '' ''.
84
ENDIF.
85
IF NOT L_T_MESSAGES IS INITIAL.
86
PERFORM WRITE_BTE_EXIT_MESSAGES TABLES L_T_MESSAGES
87
CHANGING P_SUBRC.
88
ENDIF.
89
ENDIF.
90
ENDIF.
91
92
Call Customer-Exit
93
DESCRIBE TABLE P_T_DATA LINES L_LINES.
94
MESSAGE S407 WITH 'EXIT_SAPLRSAP_001' 'CMOD' L_LINES.
95
CLEAR SY-SUBRC.
>>>>>
CALL CUSTOMER-FUNCTION '001'
97
EXPORTING
98
I_DATASOURCE = L_DATASOURCE
99
I_ISOURCE = L_12B_SOURCE
100
I_UPDMODE = P_UPDMODE
101
TABLES
102
I_T_SELECT = P_T_SELECT
103
I_T_FIELDS = P_T_FIELDS
104
C_T_DATA = P_T_DATA
105
C_T_MESSAGES = L_T_MESSAGES
106
EXCEPTIONS
107
RSAP_CUSTOMER_EXIT_ERROR = 1
108
OTHERS = 2.
109
DESCRIBE TABLE P_T_DATA LINES L_LINES.
110
MESSAGE S408 WITH L_LINES.
111
112
Handle Customer-Exit error messages
113
IF SY-SUBRC <> 0.
114
P_SUBRC = SY-SUBRC.
115
IF 1 = 2. MESSAGE E020 WITH ''. ENDIF.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Report for the extractor call
SY-MSGTY
S
SY-MSGID
R3
SY-MSGNO
407
SY-MSGV1
EXIT_SAPLRSAP_001
SY-MSGV2
CMOD
SY-MSGV3
100
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
5 FUNCTION SAPLRSAP LRSAPF06 96
CALL_DATA_CUSTOMER_FUNCTION
4 FORM SAPLRSAP LRSAPF06 96
CALL_DATA_CUSTOMER_FUNCTION
3 FORM GP3PDR0GQDXJ0ZOA35DPGNCU80M GP3PDR0GQDXJ0ZOA35DPGNCU80M 274
PROCESS_DATA_PACKAGE
2 FORM GP3PDR0GQDXJ0ZOA35DPGNCU80M GP3PDR0GQDXJ0ZOA35DPGNCU80M 170
DATA_TRANSFER
1 EVENT RSFHGEN2 RSFHGEN2 59
START-OF-SELECTIONHello Raja,
I think some objects should still lying in the dev. server which are yet to be transported, also try to deactivate and reactivate the project for user exit for BW and transport it .
Also manually request can be created for transporting object "ZOXPRO0043" into quality environment and transport it .
Let us know the output for the same.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.*** -
Short dump in VF01 - Syntax error in program "RKEAK9RECP3000001"
Helo all,
We recently copied our production client to a QA client and when we try to save an SD invoice (VF01), we get a short dump titled - Syntax error in program "RKEAK9RECP3000001".
The dump long text states:
"The Dictionary structure or table "K9RECP3000001" is either not active"
" or does not exist."
and
NOTE in case of a SHORT DUMP:
if the following perform statement should lead to a short dump, then
the report stated in the short dump is missing (RKEAK9Rsssmmmnnnn)
Check if table K9Rsssmmmnnn exists. If not it should be transported
from the original system.
Regenerate the missing reports by using transaction SE37, entering
function KEDR_REGENERATE_ALL_REPORTS and pressing button 'Test' and
'Execute'.
but I tried to run function KEDR_REGENERATE_ALL_REPORTS in SE37 and the problem persists.
Maybe I'm not running it correctly - there is no execute option when pressing "Test" so I enter the function and press F8, which takes me to a screen titled "Test function module" and then I execute.
My suspicion is that table "K9RECP3000001" cannot be created or generated since it it a system specific naming convention K9RSSSCCC0001 in which SSS is system ID (in our case ECP is production and ECQ is QA) ans CCC is client number (300 in prod, and should be 286 in ECQ).
Has anyone encountered this type of a problem and knows how to fix it?
Needless to say, I looked at OSS notes, but did not find the solution there.
Any thought will be appreciated,
Yoel.Shalom Yoel,
This problem may be caused by the fact that some derivation rules
that were originally created once in a system have been transported
into target system without transporting the dependent objects
as well (the generated tables for the derivation rule entries).
You can see this by execution of program RKEDRCHECK with only
parameter 'Check in all clients' marked. You will then get
inconsistent derivation steps (which refer to a generated table
table for the rule entries that doesn't exist because it was
not transported).
There are two ways to solve the problem:
1.) If you don't need these steps any more in derivation you can get
rid of them by executing program RKEDRCHECK with both parameters
marked ('Check in all clients' and 'Delete inconsistent steps').
2.) If these steps should remain you have to retransport the missing
tables from the source system in which these tables have to exist
(creating transport requests for the customizing of derivation by
pushing on the 'Transport' icon in the source system in transactions
KEDR and KEPC).
For each derivation step,the system generates a program RKEAK9R *
and a table K9R+ System ID+ Mandant+ a number of five figures
from the object number in KEDR.
br, Guido -
HI All,
The following error is thrown when I execute the query.
abort system error in program CL_RSDM_READ_MASTER_DATA and form_sidval_direct_
However, earlier today, I ran this query successfully several times.This Query is on a multiprovider.
Appreciate your help in advance.
Regards,
HarikaDear Harika,
Try to repair at RSRV and check.
Check: Re: SID error for characteristic
Srini -
BW-WebI Report: MDDataSetBW.GetCellData. System error in program
Hi,
I'm trying to run a WebIntelligence Report connected with BW Query but return error before showing the results.
The error is:
Error in MDDataSetBW.GetCellData. System error in program CL_RSDRC_MULTIPROV and form SETRESOLVE-01- (consid.TxtDescrit.). (WIS 10901)
My query in BO contain 8 dimensions and 2 measures.
Someone has been there?
Tks!
Edited by: Peeter Cassiano Antunes Bonomo on Sep 6, 2011 7:33 PMIngo,
running the query in RSRT with the same elements works perfectly.The results are displayed.
But tested the MDX query in the transaction MDXTest and entered in the ABAP Debugger, press F8 and the following message appeared:
"The current application triggered a termination with a short dump".
"The current application program detected a situation which really should not occur. Therefore, a termination with a short dump was triggered on purpose by the key word MESSAGE (type x)."
"Short text of error message:
System error in program SAPLRRK0 and form CHECK_KHANDLE (consid.TxtDescrit)."
Does that help?
Tks,
Edited by: Peeter Cassiano Antunes Bonomo on Sep 9, 2011 3:18 PM -
When I try to open an embedded PDF file (Word doc) I get an error "The program used to create this object is AcroExch.exe. That program is either not installed on your computer, or is corrupt..." I've tried about everything from unchecking
protected mode at startup to removing & reinstalling Adobe. Nothing seems to fix this issue. Any other ideas?
This is happening on Adobe reader 9, 10 & 11 with MS Word 2010 & 2013. I've uninstalled, cleaned & reinstalled Reader 9, 10 & 11, as well as Acrobat 10 Pro & 11 Standard. Removed "Protected mode at startup, and changed
the default program for viewing from reader to Acrobat. This will not go away. It is affecting production at our company." Help > Troubleshooting Information > Profile Directory: Open Containing Folder" . i can't find open containing folder in profile directory. it does give me the option to open the places.sqlite file using graphic converter. when i try that, graphic converter gives me a window saying that it can't be opened because it is corrupted or is not a file type supported by graphic converter.
i appreciate your help with a workaround to get the old bookmarks. that works. however, the problem has morphed from that concern to why adobe reader [the default app.] won't open firefox .sqlite files. is the problem in adobe reader or firefox? also, how can i tell if the places.sqlite file is corrupt?
i'm getting in over my head here and do appreciate your help.
Maybe you are looking for
-
Is it possible to nest SELECT statements?
Greetings community, Another newbie’s question it is. Looking tutorials and some posts here I’ve been advised not to pull entire table through the local network, and torture client machines’ processors and memory. It’s been said that better solution
-
Replicat process abending with no error in logfile
Hi, I m trying to replication from 11g to 10g on the same physical host. Below the replicat abending but unable to find the source of error in view GGSEVT logfile. GGSCI (rhel5.4_prod) 8> info all Program Status Group Lag at Chkpt Tim
-
Error displaying message payload
Hi, for some messages when I do SXMB_MONI in ABAP XI doesn't show me the message payload but an error message: Header: Binary format cannot be displayed Text: Cannot display document format. Do you want to save it to hard disk instead? I say 'Yes
-
Help re connecting my itunes to ipod
My old computer crashes and we managed to save my itunes which is now set up on my new pc (software 7). My ipod has all my tunes on but on older software i think. Will I be able to connect my ipod to my new pc okay ? Will I have to sync and do i need
-
Exception while Route Requests using un-geocoded addresses
Hi, We are having the simple Street data with 301 NODES and 399 EDGES. We use the partition router procedure to make the PARTITION table. My query is if we are making a query for Routing Engine using un-geocoded addresses a. What can I pass as st