Syntax error in ABAP query after implement patch
Dear All,
After implement patch from SAPKA46C39 to SAPKA46C53, we have syntax error in our query.
our SAP release version is 46C.
The error in query is -The data object "R01" does not have a component called "046" -
We don't found any SAP notes that match for our error.
Anyone ..please help...
Thanks a lot...
Budituta
Hi,
The query generated is based on the table structures available as they are used, etc.
So please check if there is any difference in the fields available in the tables used, LDB used if any.
In addition, may be few of the properties of the SAP query and info set does not get copied properly.
and after activating the info set only, activate the query, etc...check them once again.
Regards,
Santhosh.
Similar Messages
-
Hi All,
We are facing syntax erro with ABAP query.
We have a infoset/query which is perfectly working in one system and we downloaded the both infoset and query from this system.But the same query when it is uploaded to other system is not working.
Infoset is not giving any syntax error while activation. Morever, the generated report struture is also different from the other system. In old system, report was having one include for declaration and other for data retrieval process etc.
Can you please help us to resolve this issue?
ThanksHi,
The query generated is based on the table structures available as they are used, etc.
So please check if there is any difference in the fields available in the tables used, LDB used if any.
In addition, may be few of the properties of the SAP query and info set does not get copied properly.
and after activating the info set only, activate the query, etc...check them once again.
Regards,
Santhosh. -
Scene 1, Layer 'actions', Frame 1, Line 664: 1087: Syntax
error: extra characters found after end of program.
I am new to importing classes and I have been practicing
making a photo gallery. I am stuck and I want to know if someone
can help me with the error I am getting.
If it is convenient, you can download and test my .zip at
www.dhtmlguy.freeservers.com
Thanks in advance!thanks...the small stuff gets me every time.
-
How to check syntax errors in ABAP Queries
HI Guys,
How to check syntax errors in ABAP queries, Can please provide the T-Codes.
Advande thanks to everybody.
Thanks,
GourisankarHi
with these you can check syntax errors and performance points
Hi
these all are doing t he same thing that is checking the program for better performance
Tools for Performance Analysis
Run time analysis transaction SE30
SQL Trace transaction ST05
Extended Program Check (SLIN)
Code Inspector ( SCI)
Run time analysis transaction SE30 :This transaction gives all the analysis of an ABAP program with respect to the database and the non-database processing.
SQL Trace transaction ST05: The trace list has many lines that are not related to the SELECT statement in the ABAP program. This is because the execution of any ABAP program requires additional administrative SQL calls. To restrict the list output, use the filter introducing the trace list.
The trace list contains different SQL statements simultaneously related to the one SELECT statement in the ABAP program. This is because the R/3 Database Interface - a sophisticated component of the R/3 Application Server - maps every Open SQL statement to one or a series of physical database calls and brings it to execution. This mapping, crucial to R/3s performance, depends on the particular call and database system. For example, the SELECT-ENDSELECT loop on a particular database table of the ABAP program would be mapped to a sequence PREPARE-OPEN-FETCH of physical calls in an Oracle environment.
The WHERE clause in the trace list's SQL statement is different from the WHERE clause in the ABAP statement. This is because in an R/3 system, a client is a self-contained unit with separate master records and its own set of table data (in commercial, organizational, and technical terms). With ABAP, every Open SQL statement automatically executes within the correct client environment. For this reason, a condition with the actual client code is added to every WHERE clause if a client field is a component of the searched table.
To see a statement's execution plan, just position the cursor on the PREPARE statement and choose Explain SQL. A detailed explanation of the execution plan depends on the database system in use.
Extended Program Check
This can be called in through transaction SE38 or through transaction SLIN. This indicates possible problems that may cause performance problems.
Code Inspector (SCI)
You can call the Code Inspector from the ABAP Editor (SE38), the Function Builder (SE37), the Class Builder (SE24), or as a separate transaction (SCI).
The Code Inspector indicates possible problems. However, note that, especially with performance issues: There is no rule without exception. If a program passes an inspection, it does not necessarily mean that this program will have no performance problems.
reward if usefull -
Error executing the Query after deploying and executing the application in WLS 6.1 SP3
Hi,
We are trying to run a application by deploying a war file on Web Logic Server
6.1 SP3. After deploying and at the time of execution of the application, the
server console displays this error message
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1],
[0], [], [], [], [], [], []
While debugging thru the application we found that this error comes at the time
of execution of the query thru the Statement.executeQuery method of java.sql.Statement
class.
This same application when deployed on Web Logic Server 8.1 runs perfectly, without
any hitches.
Please, provide me the solution to this asap.Look for sometime around November. No exact date.
Eric
"Dominic Tulley" <[email protected]> wrote in message
news:[email protected]..
Thanks Eric,
you know what I'm going to ask next right?
Any ideas when SP4 comes out?
Cheers,
-Dominic
"Eric Gross" <[email protected]> wrote in message
news:[email protected]..
The next version of Apache that we will support will be 2.0.42/2.0.43
and
the module for that will be included in the next Service Pack for6.1(SP4)
and 7.0(SP2).
The problem with Apache 2 is that when a new release comes out a newmodule
needs to be compiled. Most of the time. For 2.0.42/2.0.43 this is notthe
case.
Regards,
Eric
"Dominic Tulley" <[email protected]> wrote in
message
news:3da3f246$[email protected]..
I'm trying to set this up (initially just apache in front of a single
WLS
server but ultimately I want to put it in front of a cluster).
I've installed Apache 2.0.40.
I've copied the mod_wl_20.so file into the apache modules folder.
I've edited the httpd.conf file and added the line:
LoadModule weblogic_module modules/mod_wl_20.so
When I run apache -t to check the configuration I get the following:
C:\Program Files\Apache Group\Apache2\bin>apache -t
Syntax error on line 173 of C:/Program Files/Apache
Group/Apache2/conf/httpd.conf:
Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.sointo
server: The specified procedure could not be found.
So what's going on here?
Looking at previous postings it sounds like there's an issue with
versions
of apache after 2.0.39 but I can't find a download for that version.Also,
it sounded like the issues were for WLS 7, not 6.1. Can this work
with
2.0.40 or am I wasting my time?
If I get the mod_wl_20.so from dev2dev I get the "incompatible plugin"
message that has been mentioned in this group already.
Any suggestions appreciated,
-Dominic -
Hi,
MultiProvider Activation/Display data is resulting into short dump with following text
Error in the ABAP Application Program
The current ABAP program "CL_RSD_MULTIPROV_CHECK========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSD_MULTIPROV==============CP " in include
"CL_RSD_MULTIPROV==============CM010 " in
line 1:
"Method "CHECK_LINITFL" is not declared or inherited in class "CL_RSD_M"
"ULTIPROV". -"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_RSD_MULTIPROV_CHECK========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
We have recently upgraded to EHP1SP5. We noticed this issue just after that.
Regards,
PDHi,
Please check the note 1461401.
1461401 - System error in the program CL_RSD_MULTIPROV_CHECK
This note should help you.
Regards,
Rafael -
Error in Creating Query after Infoset Activation
We have created infoset in 2004s which includes 2 cubes. As the navigational attributes of the Cubes were not available in the infoset, we had included the Infoobjects in the infoset.
But after patch upgradation to patch 16, the infoset structure was changed and now in the infoset the Navigational attributes of the cubes are also available. Because of which the Queries based on the infoset are currently not executable. And pops the below mentioned error:
But, the query based in the INFOSET started giving errors:
1.type_X
2.The Infosetname_FX object not in infoprovider(Where FX is like F1,F2 .)
And on creating any new query based on the infoprovider just after the selection of the infoprovider [ the infoset] the query designer gives following error message:
1.Terminate:Unexpected Error:RFC_ERROR_SYSTEM_FAILURE-The current application terminated with a short dump.
2.Terminate:Query Designer must be restarted ; further work not possible.
Has any one encountered such kind of issue ..Hello,
We are experiencing a similar situation. We have an infoset created with a cube and an ODS. They activate o.k. and in BW we can browse data and it looks correct. However when attempting to access with the query designer we receive the same error messages.
Were you ever able to resolve?
Thanks,
Rick -
MS SQL - Syntax error for valid query
I have a problem with the second query in this code (gives me
a syntax error in my HAVING line)
<cfquery name="getDupes" datasource="#application.ODBC1#"
dbtype="ODBC" username="#application.userNameODBC1#"
password="#application.userPassODBC1#">
SELECT *
FROM view_FormCount
WHERE formCount >= 2
ORDER BY formNum
</cfquery>
<cfset variables.lstForms = "">
<cfoutput query="getDupes">
<cfset variables.lstForms=
listAppend(variables.lstForms,"'#getDupes.formNum#'")>
</cfoutput>
<cfset variables.whereClause = "(formNum =
#ReplaceNoCase(variables.lstForms,',',' OR formNum =
','ALL')#)">
<cfquery name="getDetails"
datasource="#application.ODBC1#" dbtype="ODBC"
username="#application.userNameODBC1#"
password="#application.userPassODBC1#">
SELECT tblForms.formNum, tblForms.formName,
tblForms.formCustNum, tblCompanies.companyAbbr
FROM tblForms INNER JOIN tblCompanies ON tblForms.formCustNum
= tblCompanies.companyNum
GROUP BY tblForms.formNum, tblForms.formName,
tblForms.formCustNum, tblCompanies.companyAbbr
HAVING #variables.whereClause#
ORDER BY tblForms.formNum, tblForms.formCustNum
</cfquery>
Now, the really odd thing is if I just take the query text
out of the CFQUERY tags and use CFOUTPUT instead (to see in my
browser what query is getting executed) I get a query that I can
paste into Enterprise Mgr and runs fine.
I can even paste the resulting text into my code in a CFQUERY
and CF will run it fine.
In other words, the dynamic version query gives me an error,
but if I just output the SQL statement, copy-and-paste that into
the CFQUERY that's erroring out (replacing what's there) to run as
a static query, it works fine (sample of static query below).
The error I get when I try to do it dynamically is "Error
Executing Database Query. [Macromedia][SQLServer JDBC
Driver][SQLServer]Line 4: Incorrect syntax near '10169318'. The
error occurred on line 21." which is where the HAVING clause
starts.
SELECT tblForms.formNum, tblForms.formName,
tblForms.formCustNum, tblCompanies.companyAbbr FROM tblForms INNER
JOIN tblCompanies ON tblForms.formCustNum = tblCompanies.companyNum
GROUP BY tblForms.formNum, tblForms.formName, tblForms.formCustNum,
tblCompanies.companyAbbr HAVING (formNum = '10169318' OR formNum =
'1016CONCERTA' OR formNum = '1016NSAIDS' OR formNum =
'1016STRATTERA' OR formNum = '1016WELLBUTRIN' OR formNum =
'18504211' OR formNum = '185093807' OR formNum = '73208565' OR
formNum = '732120027' OR formNum = '7322154' OR formNum = '7323402'
OR formNum = '7323522' OR formNum = '73238900' OR formNum =
'7324211' OR formNum = '7324211S' OR formNum = '7324265' OR formNum
= '73242891' OR formNum = '732434341' OR formNum = '732434342' OR
formNum = '73243435' OR formNum = '73243436' OR formNum =
'73243439' OR formNum = '73243440' OR formNum = '73243441' OR
formNum = '73243442' OR formNum = '73243443' OR formNum = '7324359'
OR formNum = '7324360' OR formNum = '7324370' OR formNum =
'7324560' OR formNum = '7324959' OR formNum = '7326411ptreg' OR
formNum = '7326599' OR formNum = '7326600' OR formNum = '7326620'
OR formNum = '7326707' OR formNum = '7326931' OR formNum =
'7328410' OR formNum = '732851031TOP' OR formNum = '7328512' OR
formNum = '7328548' OR formNum = '7328548P2' OR formNum =
'7328548P3' OR formNum = '7328548P4' OR formNum = '73289400' OR
formNum = '73290D' OR formNum = '7329154' OR formNum =
'73291544JHS' OR formNum = '73291545JHS' OR formNum =
'73291546JHSMH' OR formNum = '73291547JHSMH' OR formNum = '7329174'
OR formNum = '7329308' OR formNum = '7329402' OR formNum =
'7329424' OR formNum = '7329455' OR formNum = '7329520' OR formNum
= '7329539' OR formNum = '73297701JH' OR formNum = '73298273' OR
formNum = '73298400' OR formNum = '73298403' OR formNum =
'73298404' OR formNum = '7329883' OR formNum = '73298860' OR
formNum = '7329887' OR formNum = '73298974' OR formNum = '7329899'
OR formNum = '7329899S' OR formNum = '73299190' OR formNum =
'7329987' OR formNum = '7329999PTO' OR formNum = '732AV5160' OR
formNum = '732CMHFRAZ' OR formNum = '732HIPAA' OR formNum =
'732HIPAAFLYERS' OR formNum = '734HEART' OR formNum = '7444711' OR
formNum = '7449230' OR formNum = '744HR4991' OR formNum =
'7538014MI' OR formNum = '77511044' OR formNum = '77511045' OR
formNum = '775stampnochange' OR formNum = '80851001BLUE' OR formNum
= '80MR4200' OR formNum = '80MR4273' OR formNum = '80MR4274' OR
formNum = '80MR4300' OR formNum = '80MR9934' OR formNum =
'80MR9935' OR formNum = '80SHC100' OR formNum = '80SHC4301' OR
formNum = '80SHC9830' OR formNum = '80SHC9832') ORDER BY
tblForms.formNum, tblForms.formCustNumAWFrueh1808 wrote:
> OK, that's simple enough. But then I'm really confused
as to why the query in
> my original post/example didn't work.
>
> The only single quotes in my #whereClause# variable were
wrapped around each
> varchar value in the WHERE clause (well, HAVING) as in
HAVING formNum = '12345'
> OR formNum = '54321'
>
> I never used a single quote within the value itself. And
yet
> preservesinglequotes fixed it. So what was CF doing? Why
did the single
> quotes still show up in the error msg - and in the right
place?
>
As I said the default behavior is to escape the quotes in
your variables
as data. So the default output of your SQL statement, before
preserveSingleQuotes() would be like this.
HAVING formNum = ''12345'' OR formNum = ''54321''
As you can see that is not the desired results in your case.
In your
case you have the proper number of single quotes in your
string and you
do not want any added. You want to preserve them so to say.
Thus
adding preserveSingleQuotes() around your whereClase
variable, i.e.
preserveSingleQuotes(whereClause) says do not add any quotes,
keep them
all single. -
Dear All,
Please tell me syntax error in the below query. When I'm going to write numeric number in this filed "$[ OVPM.DocNUm ]". It's working fine. But when I'm writing this it give me error.Please clear me where am wrong????I
SELECT T0.[AcctNum] FROM VPM1 T0 WHERE T0.[DocNum] =$ [OVPM.DocNUm ]
Regards
Edited by: Anwar Ali Sohail on Sep 27, 2011 11:43 AMHI
Try This
SELECT T0.[CheckNum] FROM VPM1 T0 INNER JOIN OVPM T1 ON T0.DocNum = T1.DocEntry WHERE T0.[DocNum] = $[OVPM.DocNum]
OR
SELECT T0.[AcctNum] FROM VPM1 T0 INNER JOIN OVPM T1 ON T0.DocNum = T1.DocEntry WHERE T0.[DocNum] = $[OVPM.DocNum]
Edited by: kambadasan on Sep 27, 2011 4:26 PM -
I have a flash form that is used to inserts a record into an
Access database table. In the for there are 4 datefields, several
text input fields, and several select fields. When I submit the
form, I get a syntax error that reads:
Executing Database Query. [Macromedia][SequeLink JDBC
Driver][ODBC Socket][Microsoft][ODBC Microsoft Access Driver]
Syntax error in INSERT INTO statement.
The error occurred on line 184. Complex object types cannot
be converted to simple values.
Line 184 is the last line of the Values in the insert query.
The query looks like this:
<CFQUERY DATASOURCE="#REQUEST.DataSource#">
INSERT INTO EstimateNumber(
BidNumber,
Project,
JobSite,
EstimatedBy,
Region,
Company,
Division,
InquiryNumber,
SafetyChecklist,
SafetyChecklistDate,
QCChecklist,
QCChecklistDate,
EstimatedValue,
UserUsername,
UserPassword,
Updated,
ReviewDate,
ReviewedBy,
Discipline,
BidDate,
JobNumber,
UpdatedBy
VALUES(
#FORM.BidNumber#,
'#FORM.Project#',
'#FORM.JobSite#',
'#FORM.EstimatedBy#',
#FORM.Region#,
#FORM.Company#,
#FORM.Division#,
'#FORM.InquiryNumber#',
#FORM.SafetyChecklist#,
#FORM.SafetyChecklistDate#,
#FORM.QCChecklist#,
'#FORM.QCChecklistDate#',
#FORM.EstimatedValue#,
'#FORM.UserUsername#',
'#FORM.UserPassword#',
#FORM.Updated#,
#FORM.ReviewDate#,
#FORM.ReviewedBy#,
#FORM.Discipline#,
#FORM.BidDate#,
#FORM.JobNumber#,
'#FORM.UpdatedBy#'
</CFQUERY>
Any recomendations?Date/Time in Access provide some pretty strage hurdles. In
many occassions I have simply changed the field to a Text field and
ran with that and never seemed to have problems with the result. I
didn't like doing it but I never received errors. I have been
receiving some parameter errors with <cfqueryparam> like the
database doesn't recognized the preceding declared field in the
update or insert query. Here is an example of a wierd error with
Access. I have 2 tables. One is for estimate numbers and the other
is for sub estimate numbers that can be assigned to specific
estimate numbers. If is actually a complicated explanation about
what is taking place behind the doors on this. The concept is
simple on the surface. Both tables have the same fields except the
subestimate table has 1 extra for a user defined subestimate
number. The only relation between the two will be the estimate
number. This insert works fine.
INSERT INTO EstimateNumber(
BidNumber,
Project,
JobSite,
EstimatedBy,
Region,
Company,
Division,
InquiryNumber,
SafetyChecklist,
SafetyChecklistDate,
QCChecklist,
QCChecklistDate,
EstimatedValue,
UserUsername,
UserPassword,
ReviewDate,
Discipline,
BidDate,
JobNumber,
UpdatedBy
VALUES(
#FORM.BidNumber#,
'#FORM.Project#',
'#FORM.JobSite#',
'#FORM.EstimatedBy#',
#FORM.Region#,
#FORM.Company#,
#FORM.Division#,
'#FORM.InquiryNumber#',
#FORM.SafetyChecklist#,
<cfqueryparam
value="#FORM.SafetyChecklistDate#"
cfsqltype="CF_SQL_DATE "
maxlength="50"
>,
#FORM.QCChecklist#,
<cfqueryparam
value="#FORM.QCChecklistDate#"
cfsqltype="CF_SQL_DATE "
maxlength="50"
>,
#FORM.EstimatedValue#,
'#FORM.UserUsername#',
'#FORM.UserPassword#',
<cfqueryparam
value="#FORM.ReviewDate#"
cfsqltype="CF_SQL_DATE "
maxlength="50"
>,
#FORM.Discipline#,
<cfqueryparam
value="#FORM.BidDate#"
cfsqltype="CF_SQL_DATE "
maxlength="50"
>,
#FORM.JobNumber#,
'#FORM.UpdatedBy#'
This next one is the same exact query with the same table
setup with one added field but kicks back a parmeter error
expecting 4. I can't explain it.
INSERT INTO SubEstimate(SubBidNumber,
BidNumber,
Project,
JobSite,
EstimatedBy,
Region,
Company,
Division,
InquiryNumber,
SafetyChecklist,
SafetyChecklistDate,
QCChecklist,
QCChecklistDate,
EstimatedValue,
UserUsername,
UserPassword,
ReviewDate,
Discipline,
BidDate,
JobNumber,
UpdatedBy
VALUES(#FORM.SubBidNumber#,
#FORM.BidNumber#,
'#FORM.Project#',
'#FORM.JobSite#',
'#FORM.EstimatedBy#',
#FORM.Region#,
#FORM.Company#,
#FORM.Division#,
'#FORM.InquiryNumber#',
#FORM.SafetyChecklist#,
<cfqueryparam
value="#FORM.SafetyChecklistDate#"
cfsqltype="CF_SQL_DATE "
maxlength="50"
>,
#FORM.QCChecklist#,
<cfqueryparam
value="#FORM.QCChecklistDate#"
cfsqltype="CF_SQL_DATE "
maxlength="50"
>,
#FORM.EstimatedValue#,
'#FORM.UserUsername#',
'#FORM.UserPassword#',
<cfqueryparam
value="#FORM.ReviewDate#"
cfsqltype="CF_SQL_DATE "
maxlength="50"
>,
#FORM.Discipline#,
<cfqueryparam
value="#FORM.BidDate#"
cfsqltype="CF_SQL_DATE "
maxlength="50"
>,
#FORM.JobNumber#,
'#FORM.UpdatedBy#'
IF I get rid of the cfqueryparam fields it works. If I simply
remove the param, I get a Syntax error. Needless to say I commented
this query for the sake of sanity for the time being. -
Syntax error in standard program after upgrade
Hi,
After upgrade from 7.0 to 7.3, we are facing a syntax error in standard program that is used in one of our process
The error says:
The field "G_REQUIDPARENT" is unknown, but there is a field with the s"
imilar name "G_REQUID_LAST". "G_REQUID_LAST"."
The system cannot find this object inside include LRSBM_REQUEST_GUIP04, that belongs to program SAPLRSBM_REQUEST_GUI
We assume that this is associated with the upgrade but we cannot find any solution in the web. Besides, this is a standard program so we cannot perform any change directly. We look for SAP Notes to apply but we didn't find nothing worthwhile
Basically, we are receiving a dump with the error message posted above and we found the syntax error, but the thing is that we don't know how to fix it, due to the fact that is a standard program and we cannot change it
I know that SAP could remove some object reference during the upgrade, but there should be an anticipated plan to fix this kind of errors, right?
Can you shed some light on this, please ?
Thanks a lot
AleHi Ale,
If you make sure there are no customization around the object and SGEN already run, I think you can just open a OSS message to SAP to looking for a fix.
Regards
Bill -
hi
experts,
i am developing a report using abap query .(stand t code is s_alr_87012277 it contain more fields but i want only 4 fields , i found 2 but remaining 2 are from structure)
my problem is that debit and credit amount is in structure
how i can get data from structure(FAGL_S_RFSSLD00_LIST )
solbm = debit.
habbm = credit.
report is like
op.
gl acc no, discription, credit amount,debit amount.Hi ajay,
try to use with logical database SDF.
assign the logical database name in info set.
gl acc no - SKA1-SAKNR
debit. - Field: um02h
credit. - field: um02s
discription - SKAT-TXT20
regards,
sateesh. -
Syntax error in ABAP HR program
Hello Experts,
I am new to programming in HR. I am getting a syntax error "PERNR is not defined for the current logical database" with the following piece of code.
TABLES: PERNR.
INFOTYPES: 0002, 0006.
GET PERNR.
PROVIDE * FROM P0002 BETWEEN PN-BEGDA AND PN-ENDDA.
WRITE: P0002-PERNR, P0002-NACHN, P0002-VORNA.
ENDPROVIDE.
Am I missing a statement or something needs to be configured in the system?
Any help will be highly appreciated.
thanks...
Rony.HI,
your code works perfectly well.. I have added the PNP logical database and selection screen 100... i think you r not added this PNP logical database
*& Report ZTESTPRG *
REPORT ZTESTPRG .
TABLES: PERNR.
INFOTYPES: 0002, 0006.
GET PERNR.
PROVIDE * FROM P0002 BETWEEN PN-BEGDA AND PN-ENDDA.
WRITE: P0002-PERNR, P0002-NACHN, P0002-VORNA.
ENDPROVIDE.
Thanks
mahesh -
Hello all
I have a query, and i got this error , any idea ?
Error starting at line 1 in command:
WITH continent_table AS
SELECT en.country,en.continent
,ROW_NUMBER() OVER (PARTITION BY en.country ORDER BY en.percent DESC) ran
FROM encompasses en
where ran=1
select co.name,con.continent,co.population/co.area as pop_density,ec.GDP,pop.Population_Growth,pop.infant_mortality,pol.government
from country co
join economy ec
on co.code=ec.country
join population pop
on co.code=pop.country
join politics pol
on co.code=pol.country
join continent_table con
on co.code=con.country
Error at Command Line:6 Column:8
Error report:
SQL Error: ORA-00904: "RAN": invalid identifier
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action:im using oracle 11g
thank you in advance
best,
david>
So is it still possible to use this selection as a view? because i can run it but i can not use it to create a view
i think because i have with xx as structure, i don't know
>
I don't know either since you didn't post your 4 digit Oracle version. You probably just have an error in your query.
This works for me using vanilla 11.2.0.1.0:
create view v_emp as
WITH q AS
SELECT empno, deptno, ename
,ROW_NUMBER() OVER (PARTITION BY deptno ORDER BY deptno) r_id
FROM emp
q1 AS
SELECT * from q where r_id < 3
SELECT * from q1
select * from v_emp
EMPNO DEPTNO ENAME R_ID
7782 10 CLARK 1
7934 10 MILLER 2
7369 20 SMITH 1
7902 20 FORD 2
7499 30 ALLEN 1
7521 30 WARD 2 -
Error while executing query after migration
I have migrated a query to 7. While executing the report following error occurs
When I attempt to open a query, (I get past the login and query selection screens) I get the following error:
"Creation of item TEXTELEMENT_xx Failed" (20 or so lines)
After which the variable entry screen pops up, but no data is displayed when the query returns due to the creation of the elements failing.
Excel 2007 Office SP2. SAP GUI 710
Please suggest.
Regards,
Raj.Hi Raj,
I also faced this problem with Excel 2007 BI
I was able to resolve the problem with the following
This problem is because changes to excel in the 2007
first try reinstalling the GUI components If it works with the reinstallation then its fine
if not try Installing FEP 900 (Latest patch for BEX Suite) and GUI 7.10 patch 13
this definitely solves your problem
Thank you
Maybe you are looking for
-
For those who use home theatres...
I'm ready to switch to mac in the next week or so by hooking up a mac mini to a lcd tv and using my mac mini from the comfy chair, a scenario which I'm sure a good few mac mini users are in. Now onto my question which is about how you guys manage you
-
we wrote a proxy that should handle request from the browser and deliver it to the parent but when we read from the parent after we read the first chunck of data and send it to the client we get connection reset error(SocketException) what should we
-
Relate to Array.sort(), urgent help~~
I am using a class for store the data then I need to sort them is it the vector which want to sort is needed in same class??? because I use other file to access them~~ The following code: public Test() Person person; Vector v = new Vector(); v.add(ne
-
Hi, What are the basic roles that would need to be assigned for a normal abap developer? We have just installed new system and would like to know the basic roles that would give authorizations to these transactions IDOC ALE RFC Queues etc Developmen
-
CS4 Select---- Modify behavior changed/broken?
Hi, In previous versions, I could Select--->All, then Select--->Modify--->Contract, which is very useful for creating frames, vignettes, etc. In CS4, after Select--->All, all of the Modify options are ghosted out (inactive) except Border, which is no