[syntax_error] in Creating New User - After applying SP ABAP & Basis lv 8

Hi Gurus.
actually I already created message to SAP regarding this. but i havent receieve any respond. I post here just in case maybe I can have immediate solution from you guys..
I have 2 system HLC and MFG
which is using same OS and DB
DB Information
DB client lib.     SQL_Server_8.00
DB releases        MSSQL 7.00.699 or higher, MSSQL 8.00.194
DBSL version       700.08
DBSL Patch Level   144
System Information
SAP versions       700
Operating System   Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Wi
OP release         5.2
which have same Kernel and SP patches
Kernel release    700
Sup.Pkg lvl.      146
SAP_ABA     700     0008     SAPKA70008
SAP_BASIS     700     0008     SAPKB70008
ST-PI 2005_1_700     0006     SAPKITLQI6
PI_BASIS     2005_1_700     0005     SAPKIPYJ75
Problem
previously both of the system HLC and MFG is in level 6 SP ABAP and BASIS
when i try to create EWA report for both of them, i have missing module in the report
and i read a note that i need to upgrade to level 8.
when i upgrade both of them to level 7, then i run sgen and there are no problem on both system
but when i upgrade both of them to level 8
in my MFG system, i can run sgen with no problem.
in my HLC system, i run sgen and it take a long time to validate the programs which are need to be recompiled. so i never run sgen to recompile on HLC system after i update the SP to level 8. but i believe this shouldnt be an issue.
the day after i update the SP, one of my user raise an issue.
(same issue is not happened in MFG system only in HLC system)
when we try to create new user..
SU01 -> create new user -> fill all the details -> save -> abap dumps
Error in the ABAP Application Program
The current ABAP program "/SAPSLL/CL_IM_BP_ADDRESS======CP" had to be
   terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/SAPSLL/SAPLBP_ADDRESS " in
   include "/SAPSLL/LBP_ADDRESSTOP " in
line 22:
"Statement "/SAPSLL/DEBUG_DATA" is not defined. Check your spelling . ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "

Hi all
problem is solved..
after doing some debugging, we found out
there are some missing entries in table TRMAC
so i just copy the missing entries from my MFG server to HLC server since they are both in same condition.
now i am wondering why do the support package miss to enter the rows in TRMAC table >.<
SAPache man..

Similar Messages

Can't create new users after GroupWise is moved from NetWare to Linux

Hi,
I moved GroupWise (Version 6.5 SP 6, single domain and single office)
from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
GroupWise server is running oaky. Existing users are able to connect
their mail box and send and receive messages. But I can't create new
users on the GroupWise server.
I used ConsoleOne installed on the Linux server to create new GroupWise
users. It seemed that I was able to do it. The new users appear on the
NDS and the GroupWise File IDs were assigned for these users. And I was
able to add these new users to distribution lists. But the users DB
files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
server and they cannot connect to the server. Old users cannot find them
in Novell GroupWise Address book.
Does anyone how to fix the problem?
Thanks in advance!
Jinkang

Hi,
[email protected] wrote:
>
> Hi,
>
> I moved GroupWise (Version 6.5 SP 6, single domain and single office)
> from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
> GroupWise server is running oaky. Existing users are able to connect
> their mail box and send and receive messages. But I can't create new
> users on the GroupWise server.
>
> I used ConsoleOne installed on the Linux server to create new GroupWise
> users. It seemed that I was able to do it. The new users appear on the
> NDS and the GroupWise File IDs were assigned for these users. And I was
> able to add these new users to distribution lists. But the users DB
> files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
> server and they cannot connect to the server. Old users cannot find them
> in Novell GroupWise Address book.
>
> Does anyone how to fix the problem?
This clearly sounds like your domain (which is the part of groupwise
which you admin against) doesn't/can't talk to the postoffice, so the
change you made (to the domain) does never get to the PO (which is where
the addressbook of your other users come from, and is what is
responsible for creating the user DB). This seems very likely to be
caused by your move not being done properly, and old information (either
path or IP address) for the PO still being in the domain and/or domain
database.
So how's the domain linked to the PO?
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

Problems with Creating New Users after migration to EOP

My company uses EOP only for spam email protection as we have an on premise Exchange 2010 server. The issue I am having is after I manually create a new user through the Office 365 Admin Center they do not show up as a user in the Exchange Admin Center
part of EOP. Please let me know if any additional information is needed.

Hi,
Thank you for your post here.
Please firstly double check your configuration as the follow article.
http://technet.microsoft.com/en-us/library/office-365-user-account-management.aspx
Best Regards
Quan Gu

Cannot copy or create new user in portal

Hi all,
I have tried to create new users in dual stack abap & java installation. However, j2ee_admin and sap* both display critical stop with message "An error has occured, contact your system administrator." Unfortunately, there is nothing more than this message in portal. I have used visual administrator from go.bat also but the result is the same with error:
Caused by: java.lang.ClassNotFoundException: com.sap.security.core.persistence.datasource.PersistenceException
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
Any clues!
Regards.

Hi Eduardo/Jo,
That's fine, I can see abap user in both visual administrator and portal's identity mgt area.
However, when attempted to logon with an super admin role abap user, the portal displays, user is locked... okay, go to portal with j2ee_admin and unlock this user... again login and message user is still locked.... Go to visual administrator the same user appears as locked. click the pencil button and try to unlock, visual admin displays message "unable to unlock user. details are available in status bar".
Following is the perhaps relevant part of the long error details.
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Attribute "islocked" on namespace "com.sap.security.core.usermanagement" of principal "UACC.R3_DATASOURCE.MOHAMMAD" is not modifiable.
So, all in all, portal cannot logon with super administrator becuase it appears locked in visual admin, cannot unlock this user in visual admin because of above error message.
Any clues, please.
Regards.

Creating new databases after latest security patch applied

10.2.0.4
If I create a database AFTEr applying the opatch for the October 2009 security patch, do I need to also run:
@catbundle.sql cpu apply
Or is it included in the create database? I use the DBCA to create new databases.

user8574962 wrote:
This is what Oracle states on metalink doc id: 422303.1
Once the bundle patch or the Critical Patch Update (CPU) patch is applied on an ORACLE_HOME should you run post-installation scripts for every newly created Oracle database using the same ORACLE_HOME?
Solution
This should be documented in the patch's README as the answer will vary with each patch.
If the patch's README is not documented, then the Post Install tasks should be run.
And this is what the OCTCPU09 README says:
3.3.3 Post Installation Instructions for Databases Created or Upgraded after Installation of CPUOct2009 in the Oracle Home
These instructions are for both non-RAC environments and RAC environments when a database is created or upgraded after the installation of CPUOct2009.
You must execute the steps in Section 3.3.2.1, "Loading Modified .sql Files into the Database" for any new database only if it was created by any of the following methods:
Using DBCA (Database Configuration Assistant) to select a sample database (General, Data Warehouse, Transaction Processing)
Using a script that was created by DBCA that creates a database from a sample database
Hope that helps.Point taken that it could vary by patchset, but those particular instructions quoted square exactly with what I had said. To quote with emphasis:
"You must execute the steps . . . for any new database *only if* it was created by any of the following methods . . ."
And what are those methods? Creating the database from a sample (pre-patch) database. If one uses dbca to create a 'custom' database, the resulting scripts will start from scratch with a CREATE DATABASE command - no pre-patch version sample or seed database involved.
:-)

Error while creating new user in Oracle 11i EBS

I am getting following error while creating new user. How solve this issue?
“Unable to load java class % specified profile option SIGNON_PASSWORD_CUSTOM. Please verify that the class exists and that it implements the java interface oracle.apps.fnd.security.PasswordValidation”.

Following is the text from Note for Custom Password Validation logic:
Customers who wish to use their own password validation logic may do
so by writing their own Java classes that implement the
oracle.apps.fnd.security.PasswordValidation Java interface. The
interface requires 3 methods to be implemented:
1) public boolean validate(String user, String password)
    - This method takes a username and password, and then returns true
or false, indicating whether the user's password is valid or invalid,
respectively.
2) public String getErrorStackMessageName()
    - This method returns the name of the message to display when the
user's password is deemed invalid (i.e., the validate() method returns
false).
3) public String getErrorStackApplicationName()
    - This method returns the application shortname for the
aforementioned error message.
After writing the Java class to perform customized password
validation, the customer must then set the value of the profile option
SIGNON_PASSWORD_CUSTOM to be the full name of the class. If, for
example, the name of the Java class is
oracle.apps.fnd.security.AppsPasswordValidation, then the value of the
SIGNON_PASSWORD_CUSTOM profile option must be
oracle.apps.fnd.security.AppsPasswordValidation. Note that AOL/J
will attempt to load this class dynamically. Hence it is necessary to
make the class accessible by AOL/J. This means that in Forms, the
class must first be loaded into the database using the loadjava
command.
You will need to apply the following patches for 11.5.1:
   1344802
   1363919
   1472974
   1351004
   1377615
You will need to apply the following patches for 11.5.2:
   1377615

Creating new user in enterprise portal 7 .0

Hi,
I have installed enterprise portal 7.0 and backend is ECC 6.0 on windows 2003.i have logged with J2EE_ADMIN user.when i am trying to create new user in EP7.0 ,i got this problem.(an error occured,contact system administrator).please help me.

Hi,
Go to http://<server>:5<instance no>00
Click on User Management. After login, go to Configuration tab and there you can check.
Thanks
Sunny

Error while creating new user

Hi
I HAVE LOGGED INTO oracle Portal with user : portal30 passwd : portal30.
After selecteing the administer tab when i click on create new users I am getting error
Error: (WWC-00000) with a back link ( which does not work ). I didn't get anything other than this on screen.
I have tried to found out the soln but never succeded. What you think would be the reason for getting this error?
do tell me on [email protected]
Regards and thanks in advance
Kedar

Kedar,
You may be able to find help on this by searching the 9iAS Portal forum, this forum is for questons relating specifically related to the PDK.
thanks,
Sue

Unable to create new user thru Portal

Hi,
I am unable to create user from the oracle portal web page under the Administer tab.
I have logged in as user PORTAL30 which has DBA rights.
When I click the Create new user link, it generates an error page WWC-00000.
Would appreciate if any can help me out urgently.
OS: NT4 SP5
9iAS 1.0.2.1
Vipul
null

Cindy,
Thanks for the solution. It worked fine after changing servername to lowercase.
The servername was set in in httpd.conf by the 9iAS installer itself. I would like to express that Oracle should have checked before launching or should have listed it in the release notes.
Once again thanks for the inputs, Cindy.
Regards,
Vipul
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by cindy:
I too was having the same problem. I found this in another post:
"this is reported as
BUG:1534919
the solution is to use lower case server name in httpd.conf. It must be in lower case."
I made the change and am now able to create users.<HR></BLOCKQUOTE>
null

Cannot create new user in oracle bam

Hi Guys,
Can anyone help me in creating new user in oracle bam. I've already follow the steps in bamadmin.pdf but i cannot connect to BAM using the one i've created.
Please Help.
Thank you!

RRA wrote:
Hello,
How can I create a new user directly in database instead of creating from System Administrator menu in Oracle Applications R12 ?
Also, is it possible to apply some default responsibilities when a creation of new user account take place via database ?
Thanks.This topic was discussed many times in the forum before, please see old threads for the same topic/discussion along with the code you can use.
Create Application User from the Backend
https://forums.oracle.com/forums/search.jspa?threadID=&q=Create+AND+Application+AND+User+AND+Backend&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Create+AND+Users+AND+API&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Assign Responsibilities API
https://forums.oracle.com/forums/search.jspa?threadID=&q=Assign+AND+Responsibilities+AND+API&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
FND_USER_PKG API
https://forums.oracle.com/forums/search.jspa?threadID=&q=FND_USER_PKG&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
FND_USER_PKG.CreateUser
https://forums.oracle.com/forums/search.jspa?threadID=&q=FND_USER_PKG.CreateUser+&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
FND_USER_PKG.AddResp
https://forums.oracle.com/forums/search.jspa?threadID=&q=FND_USER_PKG.addresp&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

WebCenter Suite: How to create new users ?

Hi,
What is the easiest way to create new users for the WebCenter Suite Content DB...
Regards
Boris

Hello,
I guess you have chosen the file system option. If so you need can drag the jazn-data.xml from your CDB ORACLE_HOME in a JDeveloper project. After right-clicking on this imported file you can select the properties. Now you are in a wizard to create users and groups/roles. After modifying your file you can replace it on the server. To find the right location of the jazn-data.xml you can go to the EM Site http://<host>:<port>/em/console/ias/oc4j/sec/secProvs to look for the security provider of the "content" application. Edit the provider and you will see the location of the jazn-data.xml.

Old user account not accessible - Had to create new user account

Why was I forced to create a new user account in order to access Apple discussions? The last time I had posted to Apple discussions was 11/06. From the emails notifying me of replies to my post, I can still go to the link where my question and the replies are. Last week I wanted to post another question. Instead I encountered a circular problem. Every time I tried to log in to discussions with my Apple ID and password (the same as my .Mac name and password, which were working fine for accessing .Mac), I was told that there was an error in my password. When I tried again, I was repeatedly re-directed to a "create new user account" web page that listed my .Mac email address as my Apple ID, as it should have. I tried to re-create my old user account with my own [real] name (as before) and was told that name was in use! Of course, it was me! (I had always used by real first name and surname as my name on Apple discussions.) So finally, very frustrated, I created a new name, a nickname, for discussions, and it worked. Now, all my previous posts are gone. It's as if I didn't exist in the Apple world until today, 9/16/07, but I originally had established my user account in 2004. I tried asking about this in a phone call to Apple support, but I was re-directed to the .Mac web site. Then I posted a question at .Mac feedback to no avail. I had a feeling that as soon as I "obeyed" and created a new user account that wouldn't be recognized as myself, my past posts would be sent into oblivion. I don't like losing all my previous posts that were attached to my user account. I have found this problem very frustrating and would really like an explanation.

Hi decemberbaby,
Try this procedure.
Delete all the Apple Cookies in your browser, and empty the Cache.
Go here Discussions Sign In, and try logging in with your original Apple ID again.
If that still doesn't work, delete the Cookies again, and go to My Info, and log in with the original Apple ID.
If you get the error message "Your Apple ID or password was entered incorrectly.", click on "Did you forget your password? Click here for assistance".
On the page that opens, you can also click on "Forget your Apple ID
ali b

Creating new user in AD

Hi all,
I am trying to write a script to create new user in Active Directory using power-shell
$sam = "13653123"
try{
get-aduser -Identity $sam -ErrorAction Stop
catch [Microsoft.ActiveDirectory.Management.ADIdentityNotFoundException]
$error1= [System.Windows.Forms.MessageBox]::Show("ERROR : Account Not found")
$SamAccountName = $sam
$gn = "Jack Sparrow"
$Initials = "ZX"
$dn = "$gn "+" $Initials"
$Department = "1260"
$title = "AM"
$pwd1 = read-host "Please enter the password"
$pwd2 = read-host "Please enter the password"
if($pwd1 -eq $pwd2)
$pwd = $pwd1 = $pwd2
try
$userprinicpalname = $SamAccountName + "@XXX.com"
New-ADUser -SamAccountName $SamAccountName -UserPrincipalName $userprinicpalname -GivenName $gn -Initials $Initials -Name $dn -DisplayName $dn -Title $title -Department $Department -Office $Department -Path "OU=XXXX,DC=XXX,DC=com" -AccountPassword (ConvertTo-SecureString $pwd -AsPlainText -force) -Enabled $True -PasswordNeverExpires $False -ErrorAction Stop
catch [Microsoft.ActiveDirectory.Management.ADPasswordComplexityException]
$error7= [System.Windows.Forms.MessageBox]::Show("ERROR : The password you entered doesnot meet the complexity set in the Password Policy" )
break
else
$error2= [System.Windows.Forms.MessageBox]::Show("ERROR : passwords donot match")
I am getting issue when The password complexity error is coming. It is showing up the error in the catch, but it is creating the account in AD and disabling it.
What I want is if any error is found and caught in the catch, then the user should not be created. How to do that?
Please provide your valuable suggestions and help me out
Naveen Basati

This is a good way to get teh paassword to abort when it fails the test.
function Test-Password{
Param($Password)
Try{
$pwd=ConvertTo-SecureString $Password -AsPlainText -force
Set-ADAccountPassword testuser11 -NewPassword $pwd –Reset
# it worked so return the encrypted password
$pwd
Catch{
Throw $_
$sam = "13653123"
if(get-aduser -Filter "SamAccountName -eq $sam"){
Write-Host 'User already exists' -ForegroundColor green
}else{
Try{
$pwdText='x123!heLno34' # 3 levels of compexity plus length > 9
$pwd=Test-Password $pwdText
$given='Jack'
$surname='Sparrow'
$Initials='Z'
$Department='1260'
$title='AM'
$props=@{
SamAccountName=$sam
UserPrincipalName="$[email protected]"
GivenName=$given
Initials=$Initials
Name="$given $initials $surname"
DisplayName="$given $initials $surname"
Title=$title
Department=$Department
Office=$Department
Path='OU=TestOU,DC=testnet,DC=local'
AccountPassword=$pwd
Enabled=$True
PasswordNeverExpires=$False
New-ADUser @props -ErrorAction Stop
Catch{
throw $_
We just re-throw the error and it propagates to the outer try/catch block.
¯\_(ツ)_/¯

Not able to create new users or groups

hi all,
We have configured multiple LDAPs by changing XML file.
But now we are not able to create new users or groups.It is giving error saying that "Adapter is configured as read-only"
Can anybody help me out in this problem.
Thanking You,
Amol.

For multiple LDAPs to work we have downloaded the Xml file namely "Flat hierarchy + Database "
We made the necessary changes and then uploaded it.
Now we want to create users or groups in portal-database and not in LDAP. But it is throwing error saying that "Adapter is read only". We suppose that it is trying to create users and groups in LDAP.
So can anyone help us to create users or groups in portal-database.
Thanking You,
Amol.

Problem with creating new user in portal = portlet is not visible

Hi,
I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
How can I make this portlet visible?
Please Help
thank you...
Gilbert

Hi..my problem slightly similar.
I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
I expect the user will be a public user.
But, when he try to logged in the portal,
He cannot see all the PORTLETS related to database values..
All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
So, what did i do wrong?
Plz Advise, and thanks.

[syntax_error] in Creating New User - After applying SP ABAP & Basis lv 8

Similar Messages

Maybe you are looking for