Syntax Error in Generated Code

Hi All,
I am facing the syntax error in WD4A.
Web Dynpro Comp. / Intf. Z_PO_REQUEST,Web Dynpro Component Controller COMPONENTCONTROLLER
Error in Generated Code
The type "ZIWCI_PO_Request" is unknown, but there is a type with the
similar name "IG_Z_PO_REQUEST". "IG_Z_PO_REQUEST". "IG_Z_PO_REQUEST".
Any Suggestions to fix this?.
Thanks in Advance,
Rajen.

Similar Messages

Syntax Error in generated program.

Hi Experts -
I saw a similar thread regarding the issue I'm having but I thought I'd open another thread.
0CMMT_ITEM_FMCI_PU_HIER Syntax Error for Generated Program
I'm doing an extraction for 0CRM_ORGUNIT_HR01_HIER in RSA3 of CRM.
I get an error message:
Message RJ028 : Error 6 in function module RSS_PROGRAM_GENERATE
There is a syntax error in the code.
How do you solve this issue?
We applied OSS note 822323 but still get the same error. The code still has the syntax error.
Any one saw this or have any solutions? Please let me know. Thanks a lot in advance!

Hi,
Use the program RSA1HCAT in SE38 to check your hierarchy.
Transaction RSA3 was not developed for checking hierarchy DataSources.
Rather, it is only for transaction and attribute/text datasources. If
you want to check the extraction of hierarchy datasources in the R/3
system, you should use the report RSA1HCAT. In this report, enter the
name of the hierarchy datasource in the "DataSource with HierarchyType"
field.
For this problem look at the note: 632920.
Regards,
Srikanth.

Error while generating code in brf+ function

Hi all,
i am getting error while generating code in function in bRF+
am using weight fields ..if i dont use quantity fields am able to generate code .
please help.
Thanks.

Can you provide more details? What exactly is the error?
I think we have provided a note for the issue. With the details it should be possible to identify the note number.

InfoSet Query: Syntax Error while generating the program.

Dear All,
I have a Query in CRM system which contains an Infoset based on LDB.
The InfoSet Query throws up a Syntax error while generating the program.
So, we are not able to change the Infoset using the Infoset Query through SQ01.
The error is as follows:-
Syntax error in program "AQZZ==/SAPQUERY/CRM_ACTMON1 ".
Error in the ABAP Application Program
The current ABAP program "CL_QUERY_OUTPUT_DEFINITION====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "AQZZ==/SAPQUERY/CRM_ACTMON1 "
in include "AQZZ==/SAPQUERY/CRM_ACTMON1 " in
line 28:
""CRMT_REPORT_LOCATORLIST" must be a flat structure. You cannot use int"
"ernal tables, strings, references, or structures as components. -"
Please help me arrive at an solution, so that we are able to change the Infoset through the InfoSet Query.
Awaiting your reply as soon as possible.
Thanks and Regards,
Pankaj.

There is an error in your query, specifically in the definition of CRMT_REPORT_LOCATORLIST. In the short dump (transaction ST22) you will see more details and the exact location of an error if you just scroll down.
I can't tell more because this problem is specific to your system, to which I have no access. Read the whole dump and look at all the objects mentioned there.

Hierarchy load - Error RSAR 683 Syntax error in generated program, row 0

Hi guys,
When I load the hierarchy on ZMATERIAL (load from 0MATERIAL hierarchy - source system BW), I have this error message : RSAR 683 Syntax error in generated program, row 0.
I have found several SAP notes, especially [Sap Note 944842|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler], but the implementation on our system does not change anything.
We are working on BW3.5 SP12.
Can anyone could tell me what to do ?
Will this issue be solved once we upgrade until SP18 as it is mentionned in the SAPNote ?
Thanks,
Alexandra
Edited by: Alexandra Guillaux on Apr 1, 2009 4:36 PM

Hello Alex,
after implementing the corrrection part of note 944842 via SNOTE, plaese also:
1. replicate datasource
2. activate transfer structure (report RS_TRANSTRU_ACTIVATE_ALL)
3. activate infoobject (make dummy change to description
of infoobject etc, save and activate it, remove change and save and
activate it again).
Hope it could resolve the incident.
Thank you & Best regards,
Vince

Error in generated code :Component Interface

Hi All,
I have my webdynpro component active works fine in Dev Server.
When we move it to qualtiy we got a strange error " Error in Generated Code, Type Z*IWCI is unknown.
Its related to the Component interface which gets generated automatically while any WDA is created but in our system it isnt getting generated?
Looking for your valuable comments on ths
Regards
Bhanu

Hi Bhanu,
Goto se09 check for that request ICF service is generated or not? I think you first created in $TMP and assigned package.
If ICF service is not available, just copy it to new comp, it will create new ICF service. I dont know this is the solution,
just a guess.
Cheers,
Kris.

Syntax Error when generate print program in HRFORMS

Dear All,
I created form for payslip using HRFORMS, the name form is ZPS_TPI_01. When I activate the form, the error raised: Generated print program contains a syntax error
Diagnosis
Generated print program /PYXXFO/ZPS_TPI_01_PRNT conains a syntax error in line 9 of include /PYXXFO?ZPS_TPI_01_PAYR.
I have already apply note 878168 but it is not work.
Please advise me.
Thank you,

hi,
can you let me know for which country are you trying to generate the HR form for payslip?
There are certain countries for which payslip isnt supported.
For such countries you get a similar error.
Thank you,
Jose

Designer syntax errors in correct code.

I have added some trigger code to a bound item. The designer syntax checker finds errors in the code but the generated form runs correctly. It appears that the syntax checker doesn't like DECLARE. The code doesn't do anything and I believe it is fine but I would like to get the syntax checker to stop complaining about it. Any suggestions on how I might arrange things to stop the syntax error messages would be appreciated. Here is the offending code with error messages:
DECLARE
item_id Item;
BEGIN
item_id := FIND_ITEM('M1.STATE');
END;
The Syntax Checker found the following errors:-
PLS-00103: (Line 1) Encountered the symbol "DECLARE" when expecting one of the following:
begin function package pragma procedure separate subtype type
use <an identifier> <a double-quoted delimited-identifier>
form current cursor external language
The symbol "begin" was substituted for "DECLARE" to continue.
PLS-00103: (Line 20) Encountered the symbol "end-of-file" when expecting one of the following:
begin case declare end exception exit for goto if loop mod
null pragma raise return select update while with
<an identifier> <a double-quoted d
[2] error(s), [0] warning(s)

This will not work correctly in 32-bit Windows (or 64-bit) The type of wParam *must* be WPARAM, the type of lParam *MUST* be LPARAM, and for a dialog handler the return type should be BOOL. The old _export keyword no longer exists, and is not needed in
Win32. FAR is a macro with an empty body and its appearance in all places can be deleted. The quaint and confusing PASCAL keyword may still work, but it would be better to use the now-correct term CALLBACK. Since this is clearly antique Win16 code, there may
be other problems dealing with size of integers. The types int, long, DWORD, UINT and others all represent 32-bit values. The return type for window handlers must have the return type LRESULT, and for dialog handlers, BOOL. All wParam and lParam types must
be changed as I indicated. Note that for Win16, wParam was 16-bit and lParam 32-bit. For Win32, WPARAM, LPARAM and LRESULT are all 32-bit values, and for Win64 they are 64-bit values. Any place the code casts a pointer to an integer type, the code is inherently
incorrect. You must use types like INT_PTR, UINT_PTR, DWORD_PTR and other _PTR-suffixed types for such casts; in Win32 these are pointer-sized integer types (32-bit) and in Win64 they are pointer-sized integer types (64-bit). Types like int, long, DWORD, etc.
are 32-bit values in both Win32 and Win64. Converting code to run on Win32/64 from Win16 requires great caution, because the programming "standards" that were taught for Win16 did not plan on true platform portability, and programmers were taught
terrible techniques such as declaring wParam as WORD and LPARAM as long. And casting pointers to ints and back. All of these techniques lead to disaster.

OWB Error while generating Code for a mapping

I have a simple mapping loading from a source to a flat file. When I try to generate code it gives me the following Error
VLD-2357: Target Data File name not specified for file <target Flat file name>.
I am new to OWB so any help on the same will be greatly appreciated. How can I specify target Data File name in the mapping configuration under Flat file operators
Thanks
Anish

If you configure the mapping in the UI from the main design tree and select the name of your file operator under the tree node 'Flat File Operators' on the right hand side panel the properties should be displayed - one of these properties is 'Target Data File Name', enter the name of your target data file name.
Cheers
David

EEWB - Syntax error while generating Enhancement Project component

Hi,
I'm using SAP CRM 7.0. I used EEWB (Extended Enhancement Workbench) to create a project and add 3 fields to Business Partner (BUPA). On generation I get an error 'Syntax error in Function Group SAPLZZG00BUPA: The field '"GV_ZZATTR1_PAI_ERROR" is unknown.
There are these fields ZZATTR1 .... ZZATTR9 created by someone. Do not know in which enhancement they are in. But somehow the program generated by SAP - APLZZG00BUPA is giving this error. Is there a way to fix it?
Any help or guidance will be appreciated.
Regards,

Hi Harshit,
I check the details as mentioned by the thread. The structures are created properly.
To give you more details:
1. There is already one extension in the system created by someone - ADD NEW FIELDS - which created the structure with additional fields - ZBSTC0000000002.
2. I did an extension - ADD NEW FIELDS which added another structure in CI_EEW_BUT000 and CI_EEW_BUT000_X - ZBSTC00009JACQV
3. When I generate the project I get syntax error in SAPLZZG00BUPA - as the fields from prior structure do not exist in this program which is generated during the project generation.
Regards,

Error while generating code for deployment

I am getting the following error:
Error generating findTest1ByMarks(java.lang.Integer) query for Bean Test1(Abstract scheme name=Test1) Error=query cannot be pushed down
Query="select ..."
Could someone help me?
I am trying to generate code of Container Managed Entity Bean in WSAD 5.0.
Thanks

If you configure the mapping in the UI from the main design tree and select the name of your file operator under the tree node 'Flat File Operators' on the right hand side panel the properties should be displayed - one of these properties is 'Target Data File Name', enter the name of your target data file name.
Cheers
David

ABAP Syntax error in this code - Could anyone help?

Hi,
I have this code which runs fine in our non-unicode SAP system.
REPORT ECC5_OFFSETS.
DATA: W_KONV TYPE KONV.
DATA: TKOMK LIKE STANDARD TABLE OF KOMK
                 WITH KEY KEY_UC
                 INITIAL SIZE 2
                 WITH HEADER LINE.
DATA: TKOMK2 type STANDARD TABLE OF KOMK
                 WITH KEY KEY_UC
                 INITIAL SIZE 2.
* Get some test data
SELECT SINGLE * INTO W_KONV FROM KONV
       WHERE KNUMV = '0000000061'.
MOVE-CORRESPONDING W_KONV TO TKOMK.
APPEND TKOMK.
tkomk2[] = TKOMK[].
* Original non-Unicode compliant code
DATA: LENGTH_KEY_TKOMK(3) TYPE P.
FIELD-SYMBOLS: <TKOMK_KEY> like TKOMK2.
DESCRIBE DISTANCE BETWEEN TKOMK-MANDT AND TKOMK-SUPOS
          INTO LENGTH_KEY_TKOMK
* ( Original Unicode syntax fix! )
          IN BYTE MODE.
* Copy all the fields between these two into TKOMK_KEY field-symbol.
* ( In Unicode this assignment fails, causing short dump at read )
ASSIGN TKOMK2(LENGTH_KEY_TKOMK) TO <TKOMK_KEY>.
* Read the current record.
READ TABLE TKOMK2 WITH KEY <TKOMK_KEY>.
But I get the following error message in our UNICODE complaint SAP system:
<b>"<TKOMK_KEY>" cannot be a table, a reference, a string, or contain any of these objects.</b>
Does anyone know how I could get around this/suggest a solution?
Thanks in advance!

Hi,
Sorry if I'm being unclear.
My requirements are twofold:
1)the line of code:
ASSIGN TKOMK2(LENGTH_KEY_TKOMK) TO <TKOMK_KEY>
does not assign anything to the fields symbol <TKOMK_KEY>
2)The read statement does not like the fields symbol <TKOMK_KEY> being used as a key.
Both these bits of code worked in our 4.6b system but now in the ECC5 environemtn I get syntax errors.
Let me know if you need anything else!

Syntax error in generated report

Hi,
I execute a transactions say VB21 and enter the sales org data and when i click the copy button, the processing takes place and finally i get a dialog that shows the generated log messages and which shows details like this..
status   mesage   Note
information 801   report rv13a944 generated
information 802   screen sapmv13a 2944 generated
errors      888   report rv13a921 has a syntax error
and so on.
Whats this transaction about ? and how do i debug the syntax error in the generated report ? Is this report generated out of ABAp query ? How do i trace this ? Any help ?
thks

Maybe OSS [Note 702045 - Conditions: Syntax error in program RV13Axxx|https://service.sap.com/sap/support/notes/702045]
Regards

Syntax Error in Login Code PHP

Hello,
I am currently building my first log-in page and have come to the following issue. I am getting Syntax Error's on lines 39 & 49.
I'm sure it's something simple that I am missing here?
NOTE* Excuse me if I didn't post the code correctly, I am new to the forums.
Click here to enter the members area"; $_SESSION{'username'}=dbusername; } else echo"Incorrect Password"; } else die "that username doesnt exist"; } else die ("Please Enter a username and password"); } ?>

Thanks for the reply!
I fixed what you noted above and will look into not using the "die" command, I understand what you are saying about not using it and why
However, here is where I am getting the syntax errors specifically:
$_SESSION{'username'}=$dbusername;
else
echo"Incorrect Password";
<syntax Error>
else
die "that username doesnt exist";
else
die ("Please Enter a username and password");
} <syntax Error>
?>

Syntax errors for smarty code

I work with smarty a lot, and I mean a lot. Every single day in fact, all day long. Is there a way to turn off the syntax errors for my smarty code? Basically every file I open is going to tell me there are syntax errors all over the page...
Thanks!

I am not familiar with smarty but the options for disabling syntax errors can be found under the view menu,
View > Code View Options > Syntax Error Alerts in Info Bar (tick or untick)
Richard

Syntax Error in Generated Code

Similar Messages

Maybe you are looking for