Syntax error in generated report

Hi,
I execute a transactions say VB21 and enter the sales org data and when i click the copy button, the processing takes place and finally i get a dialog that shows the generated log messages and which shows details like this..
status   mesage   Note
information 801   report rv13a944 generated
information 802   screen sapmv13a 2944 generated
errors      888   report rv13a921 has a syntax error
and so on.
Whats this transaction about ? and how do i debug the syntax error in the generated report ? Is this report generated out of ABAp query ? How do i trace this ? Any help ?
thks

Maybe OSS [Note 702045 - Conditions: Syntax error in program RV13Axxx|https://service.sap.com/sap/support/notes/702045]
Regards

Similar Messages

Hierarchy load - Error RSAR 683 Syntax error in generated program, row 0

Hi guys,
When I load the hierarchy on ZMATERIAL (load from 0MATERIAL hierarchy - source system BW), I have this error message : RSAR 683 Syntax error in generated program, row 0.
I have found several SAP notes, especially [Sap Note 944842|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler], but the implementation on our system does not change anything.
We are working on BW3.5 SP12.
Can anyone could tell me what to do ?
Will this issue be solved once we upgrade until SP18 as it is mentionned in the SAPNote ?
Thanks,
Alexandra
Edited by: Alexandra Guillaux on Apr 1, 2009 4:36 PM

Hello Alex,
after implementing the corrrection part of note 944842 via SNOTE, plaese also:
1. replicate datasource
2. activate transfer structure (report RS_TRANSTRU_ACTIVATE_ALL)
3. activate infoobject (make dummy change to description
of infoobject etc, save and activate it, remove change and save and
activate it again).
Hope it could resolve the incident.
Thank you & Best regards,
Vince

Syntax Error in generated program.

Hi Experts -
I saw a similar thread regarding the issue I'm having but I thought I'd open another thread.
0CMMT_ITEM_FMCI_PU_HIER Syntax Error for Generated Program
I'm doing an extraction for 0CRM_ORGUNIT_HR01_HIER in RSA3 of CRM.
I get an error message:
Message RJ028 : Error 6 in function module RSS_PROGRAM_GENERATE
There is a syntax error in the code.
How do you solve this issue?
We applied OSS note 822323 but still get the same error. The code still has the syntax error.
Any one saw this or have any solutions? Please let me know. Thanks a lot in advance!

Hi,
Use the program RSA1HCAT in SE38 to check your hierarchy.
Transaction RSA3 was not developed for checking hierarchy DataSources.
Rather, it is only for transaction and attribute/text datasources. If
you want to check the extraction of hierarchy datasources in the R/3
system, you should use the report RSA1HCAT. In this report, enter the
name of the hierarchy datasource in the "DataSource with HierarchyType"
field.
For this problem look at the note: 632920.
Regards,
Srikanth.

Error while generating report in RAR

Hello,
We are getting error while generating reports in RAR.
RAR runs sucessfully, can see there are risk, but we cannot dowload those file, usally we use to get zip file.
or cannot see details ,
gives error cannt be displayed.
Thanks,
DK

Hello,
we had same issues, this happed because the disk was full.
Please check with your basis team if the disk is full.
Thanks,
Prasant

Getting error while generating report from Siebel (Siebel/BI Publisher)

Dear,
I have completed the integration of siebel and BIP according to the oracle document, I successfully upload the sample template from siebel application to BIP server.
But now I am facing two issues,
I am getting error "Unauthorized access, Please contact the administrator." when I open report on BIP which I have uploaded from siebel.
When I try to generate report from siebel=>application=>Tables=>S_Contact I am getting the below error when click on table report from Report button.
(httptransport.cpp (1635)) SBL-EAI-04117: HTTP Request error during 'Submitting Data SendHTTP request': 'Status code - 500'
(httptransport.cpp (983)) SBL-EAI-04117: HTTP Request error during 'Submitting Data Send HTTP request': 'Status code - 500'
(soapbinding.cpp (675)) SBL-EAI-04304: Unknown Part ':oracle.xdo.webservice.exception.InvalidParametersException' for operation 'runReport' exists in SOAP message.
(outdisp.cpp (247)) SBL-EAI-04308: Operation 'runReport' of Web Service 'http://xmlns.oracle.com/oxp/service/PublicReportService.PublicReportServiceService' at port 'PublicReportService' failed with the following explanation: "oracle.xdo.webservice.
Invalid User Name and Password for BIP Server
(xmlpadaptersvc.cpp (2287)) SBL-RPT-50529: Verify BI Publisher Server Userid and Password.
Error in generating Report Output file /siebel8/sea81/siebsrvr/siebel8/sea81/siebsrvr/xmlp/reports/Rept11-3U7M403.PDF in the XMLP Engine
(xmlpadaptersvc.cpp (2983)) SBL-RPT-50524: BI Publisher engine failed to generate report.
Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
( (0) err=2818155 sys=9815388) SBL-OMS-00107: Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
(bsvcmgr.cpp (1392) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
(bsvcmgr.cpp (1236) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
(smireq.cpp (425) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
Please help to resolve this issue.
Regards,
Soahil

This specifically means that the destinations have not been configured in the Crystal Job Server. If you're running 4.x, this may be part of the "Adaptive Job Server" instead of or in addition to a Crystal Job Server. If you're using 3.1 or earlier, you'll also have to set up the destination in the Destination Job Server.
You'll have to log in to the CMC, go to Servers, right-click on the correct job server and go to "Destinations". You'll then add something like "File" or "Unmanaged Disk" to the available destinations and save. Stop the job server, start it again, and your error should go away.
Please be aware that unless you're using specific credentials to schedule the report or you're saving to the server where BO is installed, you'll need to make sure that the BO services are running under a network "Services" account that has access to the folder you're scheduling the report to. By default during installation it's set to run under the "Local Services" account that doesn't have access to the network.
-Dell

InfoSet Query: Syntax Error while generating the program.

Dear All,
I have a Query in CRM system which contains an Infoset based on LDB.
The InfoSet Query throws up a Syntax error while generating the program.
So, we are not able to change the Infoset using the Infoset Query through SQ01.
The error is as follows:-
Syntax error in program "AQZZ==/SAPQUERY/CRM_ACTMON1 ".
Error in the ABAP Application Program
The current ABAP program "CL_QUERY_OUTPUT_DEFINITION====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "AQZZ==/SAPQUERY/CRM_ACTMON1 "
in include "AQZZ==/SAPQUERY/CRM_ACTMON1 " in
line 28:
""CRMT_REPORT_LOCATORLIST" must be a flat structure. You cannot use int"
"ernal tables, strings, references, or structures as components. -"
Please help me arrive at an solution, so that we are able to change the Infoset through the InfoSet Query.
Awaiting your reply as soon as possible.
Thanks and Regards,
Pankaj.

There is an error in your query, specifically in the definition of CRMT_REPORT_LOCATORLIST. In the short dump (transaction ST22) you will see more details and the exact location of an error if you just scroll down.
I can't tell more because this problem is specific to your system, to which I have no access. Read the whole dump and look at all the objects mentioned there.

Syntax Error when generate print program in HRFORMS

Dear All,
I created form for payslip using HRFORMS, the name form is ZPS_TPI_01. When I activate the form, the error raised: Generated print program contains a syntax error
Diagnosis
Generated print program /PYXXFO/ZPS_TPI_01_PRNT conains a syntax error in line 9 of include /PYXXFO?ZPS_TPI_01_PAYR.
I have already apply note 878168 but it is not work.
Please advise me.
Thank you,

hi,
can you let me know for which country are you trying to generate the HR form for payslip?
There are certain countries for which payslip isnt supported.
For such countries you get a similar error.
Thank you,
Jose

How to Resolve Join Syntax Errors in Crystal Reports 11.5

Weu2019re upgrading form Crystal Reports Runtime Client 10.0 to 11.5. I have a registry fix that resolves the join syntax errors in Crystal Reports 10.0 by updating the registry key:
[HKEY_LOCAL_MACHINE\Software\Crystal Decisions\10.0\Crystal Reports\Database\QueryBuilder\JoinBuilder]
"SQLServerJoinBuilder"="adbc"
What is the fix for Crystal Runtime 11.5?

Create a new key under:
HKEY_CURRENT_USER\Software\Business Objects\Suite 11.5\Crystal Reports\Database\QueryBuilder\JoinBuilder and add the values
"SQLServerJoinBuilder"="adbc"

Syntax Error in XL Report

Dear All,
When i am generating the XL Report it's give me the like
An error while executing report!
Description: Definition Parsing Failed.
Details:
Syntax Error Near : ItemType_0 at row $11:$16
Syntax Error Near : TotForwarding_0 at row $14:$14
Please suggest on this issue.
Thanks & Regards,
Tushar Nathwani

There are several notes on this issue. After an upgrade these UDF fields can be reset to a diffient value.
In the XL Reporter menu, turn your UDF's off, then on again to reset them.
If they are in your report as _0 values, you may need to delete & re-add them in your definition to pick up the new value.

Error While generating Report

Hi ,
I am facing 1 problem while generating Report.
I am trying to generate a report based on one Users global attribute.
I have customized the USER UI CONFIG and Uer Report task to generate a report like this.
I created a new report to generate report and in that report I have given the condition as that attribute equals to some value "true" / "False".
But there are some users who has this attribute value as true and whose accounts are not properly created in a resource LDAP So this User view is containing some error.
Hence when I try to run the newly created report as it tries to iterate on the user objects whose view is containg some errors ,the report is not properly getting generated and giving exception as error in calling the method getResourceobjects on LDAP.
What can I do now ? What is the alternative for me? I want to generate the report on that attribute only.....
It is very urgent for me and Can anyone please help me out....
it would be so great if there is any immediate reponse for this.

>
... ORA-00932: inconsistent datatypes: expected DATE got NUMBER ...
>
I believe the above error message is very descriptive.
HTH
Srini

Error while generating Report through XL Reporter.

Hello..
I am using microsoft excel 2003.I have installed XL Reporter 2005SP1. While i am trying to generate report throgh excel reporter i get the following error.
Security setting in microsoft excel prohibit XL Reporter from running.
For more information click Help.
I also tried by making security level low in microsoft excel -->Tools > Macros> Security.But still problem there.
Thanks,
Arpit

Hi Arpit,
As well as setting the macro security to Medium or lower, you need to tick the options 'Trust all installed add-ins and templates' and 'Trust access to Visual Basic Projects'. These options appear at the bottom of the Trusted Publishers tab in the Macro Security window.
Hope this helps,
Owen

FREC Error while Generating Reports in Quality Center

Hi,
We usually generate reports using Dashboard module of Quality Center . While generating reports on a particular PC, we are getting the following error.
The SQL Query <sheet1> has failed to run, with the following error:
Returned Result is not valid FREC.
We are able to generate the same report on a different PC.
Does anyone encounter this issue earlier? Could someone help us out in solving this issue.

Issue popped up with me a few times and seemingly uncontrolled.
I resolved one query with replacing quotes in the string i.e. replace single with double by replace([field],chr(39),chr(34))

EEWB - Syntax error while generating Enhancement Project component

Hi,
I'm using SAP CRM 7.0. I used EEWB (Extended Enhancement Workbench) to create a project and add 3 fields to Business Partner (BUPA). On generation I get an error 'Syntax error in Function Group SAPLZZG00BUPA: The field '"GV_ZZATTR1_PAI_ERROR" is unknown.
There are these fields ZZATTR1 .... ZZATTR9 created by someone. Do not know in which enhancement they are in. But somehow the program generated by SAP - APLZZG00BUPA is giving this error. Is there a way to fix it?
Any help or guidance will be appreciated.
Regards,

Hi Harshit,
I check the details as mentioned by the thread. The structures are created properly.
To give you more details:
1. There is already one extension in the system created by someone - ADD NEW FIELDS - which created the structure with additional fields - ZBSTC0000000002.
2. I did an extension - ADD NEW FIELDS which added another structure in CI_EEW_BUT000 and CI_EEW_BUT000_X - ZBSTC00009JACQV
3. When I generate the project I get syntax error in SAPLZZG00BUPA - as the fields from prior structure do not exist in this program which is generated during the project generation.
Regards,

Error when generating report in exe built from LV8.6

Hi all,
Using LV8.6 and report generation toolkit 1.1.3 i have one application in that i am generating report in 'word' and 'exel'. I have built that application as a EXE. in that exe i am unable to generate report. i am getting following error:
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
Complete call chain:
Get LV Class Default Value.vi
NI_report.lvclass:New Report.vi
Conditionally Formatted Word Table.vi
r.vi
Regards,
Santhosh M

yes i have includeed all the class and dependents but still it is giving problem i will send my code pls build the exe and run it, thentel about that...
Regards,
Santhosh M
Attachments:
Test.zip ‏11 KB

Syntax Error in Generated Code

Hi All,
I am facing the syntax error in WD4A.
Web Dynpro Comp. / Intf. Z_PO_REQUEST,Web Dynpro Component Controller COMPONENTCONTROLLER
Error in Generated Code
The type "ZIWCI_PO_Request" is unknown, but there is a type with the
similar name "IG_Z_PO_REQUEST". "IG_Z_PO_REQUEST". "IG_Z_PO_REQUEST".
Any Suggestions to fix this?.
Thanks in Advance,
Rajen.

Hi All,
I am facing the syntax error in WD4A.
Web Dynpro Comp. / Intf. Z_PO_REQUEST,Web Dynpro Component Controller COMPONENTCONTROLLER
Error in Generated Code
The type "ZIWCI_PO_Request" is unknown, but there is a type with the
similar name "IG_Z_PO_REQUEST". "IG_Z_PO_REQUEST". "IG_Z_PO_REQUEST".
Any Suggestions to fix this?.
Thanks in Advance,
Rajen.

Syntax error in generated report

Similar Messages

Maybe you are looking for