Syntax Error in Login Code PHP

Hello,
I am currently building my first log-in page and have come to the following issue. I am getting Syntax Error's on lines 39 & 49.
I'm sure it's something simple that I am missing here?
NOTE* Excuse me if I didn't post the code correctly, I am new to the forums.
Click here to enter the members area";         $_SESSION{'username'}=dbusername;             }     else         echo"Incorrect Password";     }         else         die "that username doesnt exist";                 } else     die ("Please Enter a username and password");     } ?>

Thanks for the reply!
I fixed what you noted above and will look into not using the "die" command, I understand what you are saying about not using it and why
However, here is where I am getting the syntax errors specifically:
$_SESSION{'username'}=$dbusername;
else
echo"Incorrect Password";
<syntax Error>
else
die "that username doesnt exist";
else
die ("Please Enter a username and password");
}       <syntax Error>
?>

Similar Messages

  • ABAP Syntax error in this code - Could anyone help?

    Hi,
    I have this code which runs fine in our non-unicode SAP system.
    REPORT  ECC5_OFFSETS.
    DATA: W_KONV TYPE KONV.
    DATA: TKOMK LIKE STANDARD TABLE OF KOMK
                     WITH KEY KEY_UC
                     INITIAL SIZE 2
                     WITH HEADER LINE.
    DATA: TKOMK2 type STANDARD TABLE OF KOMK
                     WITH KEY KEY_UC
                     INITIAL SIZE 2.
    * Get some test data
    SELECT SINGLE * INTO W_KONV FROM  KONV
           WHERE  KNUMV  = '0000000061'.
    MOVE-CORRESPONDING W_KONV TO TKOMK.
    APPEND TKOMK.
    tkomk2[] = TKOMK[].
    * Original non-Unicode compliant code
    DATA: LENGTH_KEY_TKOMK(3) TYPE P.
    FIELD-SYMBOLS: <TKOMK_KEY> like TKOMK2.
    DESCRIBE DISTANCE BETWEEN TKOMK-MANDT AND TKOMK-SUPOS
              INTO LENGTH_KEY_TKOMK
    * ( Original Unicode syntax fix! )
              IN BYTE MODE.
    * Copy all the fields between these two into TKOMK_KEY field-symbol.
    * ( In Unicode this assignment fails, causing short dump at read )
    ASSIGN TKOMK2(LENGTH_KEY_TKOMK) TO <TKOMK_KEY>.
    * Read the current record.
    READ TABLE TKOMK2 WITH KEY <TKOMK_KEY>.
    But I get the following error message in our UNICODE complaint SAP system:
    <b>"<TKOMK_KEY>" cannot be a table, a reference, a string, or contain any of these objects.</b>     
    Does anyone know how I could get around this/suggest a solution?
    Thanks in advance!

    Hi,
    Sorry if I'm being unclear.
    My requirements are twofold:
    1)the line of code:
    ASSIGN TKOMK2(LENGTH_KEY_TKOMK) TO <TKOMK_KEY>
    does not assign anything to the fields symbol <TKOMK_KEY>
    2)The read statement does not like the fields symbol <TKOMK_KEY> being used as a key.
    Both these bits of code worked in our 4.6b system but now in the ECC5 environemtn I get syntax errors.
    Let me know if you need anything else!

  • Designer syntax errors in correct code.

    I have added some trigger code to a bound item. The designer syntax checker finds errors in the code but the generated form runs correctly. It appears that the syntax checker doesn't like DECLARE. The code doesn't do anything and I believe it is fine but I would like to get the syntax checker to stop complaining about it. Any suggestions on how I might arrange things to stop the syntax error messages would be appreciated. Here is the offending code with error messages:
    DECLARE
    item_id     Item;
    BEGIN
    item_id := FIND_ITEM('M1.STATE');
    END;
    The Syntax Checker found the following errors:-
    PLS-00103: (Line 1) Encountered the symbol "DECLARE" when expecting one of the following:
    begin function package pragma procedure separate subtype type
    use <an identifier> <a double-quoted delimited-identifier>
    form current cursor external language
    The symbol "begin" was substituted for "DECLARE" to continue.
    PLS-00103: (Line 20) Encountered the symbol "end-of-file" when expecting one of the following:
    begin case declare end exception exit for goto if loop mod
    null pragma raise return select update while with
    <an identifier> <a double-quoted d
    [2] error(s), [0] warning(s)

    This will not work correctly in 32-bit Windows (or 64-bit) The type of wParam *must* be WPARAM, the type of lParam *MUST* be LPARAM, and for a dialog handler the return type should be BOOL. The old _export keyword no longer exists, and is not needed in
    Win32. FAR is a macro with an empty body and its appearance in all places can be deleted. The quaint and confusing PASCAL keyword may still work, but it would be better to use the now-correct term CALLBACK. Since this is clearly antique Win16 code, there may
    be other problems dealing with size of integers. The types int, long, DWORD, UINT and others all represent 32-bit values. The return type for window handlers must have the return type LRESULT, and for dialog handlers, BOOL. All wParam and lParam types must
    be changed as I indicated. Note that for Win16, wParam was 16-bit and lParam 32-bit. For Win32, WPARAM, LPARAM and LRESULT are all 32-bit values, and for Win64 they are 64-bit values. Any place the code casts a pointer to an integer type, the code is inherently
    incorrect. You must use types like INT_PTR, UINT_PTR, DWORD_PTR and other _PTR-suffixed types for such casts; in Win32 these are pointer-sized integer types (32-bit) and in Win64 they are pointer-sized integer types (64-bit). Types like int, long, DWORD, etc.
    are 32-bit values in both Win32 and Win64. Converting code to run on Win32/64 from Win16 requires great caution, because the programming "standards" that were taught for Win16 did not plan on true platform portability, and programmers were taught
    terrible techniques such as declaring wParam as WORD and LPARAM as long. And casting pointers to ints and back. All of these techniques lead to disaster.

  • Syntax errors for smarty code

    I work with smarty a lot, and I mean a lot.  Every single day in fact, all day long.  Is there a way to turn off the syntax errors for my smarty code?  Basically every file I open is going to tell me there are syntax errors all over the page...
    Thanks!

    I am not familiar with smarty but the options for disabling syntax errors can be found under the view menu,
    View > Code View Options > Syntax Error Alerts in Info Bar (tick or untick)
    Richard

  • Syntax Error in Generated Code

    Hi All,
                I am facing the syntax error in WD4A.
    Web Dynpro Comp. / Intf. Z_PO_REQUEST,Web Dynpro Component Controller COMPONENTCONTROLLER
    Error in Generated Code
    The type "ZIWCI_PO_Request" is unknown, but there is a type with the
    similar name "IG_Z_PO_REQUEST". "IG_Z_PO_REQUEST". "IG_Z_PO_REQUEST".
    Any Suggestions to fix this?.
    Thanks in Advance,
    Rajen.

    Hi All,
                I am facing the syntax error in WD4A.
    Web Dynpro Comp. / Intf. Z_PO_REQUEST,Web Dynpro Component Controller COMPONENTCONTROLLER
    Error in Generated Code
    The type "ZIWCI_PO_Request" is unknown, but there is a type with the
    similar name "IG_Z_PO_REQUEST". "IG_Z_PO_REQUEST". "IG_Z_PO_REQUEST".
    Any Suggestions to fix this?.
    Thanks in Advance,
    Rajen.

  • Syntax error in my code and I can't figure out the problem

    When I try to compile a program, I get this message:
    Syntax error on token "(", "Identifier" expected
    This is the part of the code that is giving me trouble:
    JTextPane textPane = createTextPane();
              JScrollPane paneScrollPane = new JScrollPane(textPane);
              paneScrollPane.setVerticalScrollBarPolicy(
                                  JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
              paneScrollPane.setPreferredSize(new Dimension(250, 155));
              paneScrollPane.setMinimumSize(new Dimension(10, 10));Can you see what's wrong?
    Thanks

    The code's syntax is perfectly fine. The compiler is not falgging an error message in this part of your code. One silly thing you can do:
    Try out this silly change...I don't think it will make any difference but still.
    paneScrollPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);That is, put it all in a single line.
    If it is already in a single line then you can be sure that the problem is being flagged from elsewhere in your code and this portion.
    Vijay :-)

  • Help me find syntax error in AS3 code to chain FLV videos.

    I posted a how to do this a couple of weeks back & someone was kind enough to offer this advice to an AS newbie...
    "you should create a fla, drag an flvplayback component to the stage, create an array of your flvs, initialize an index at zero, assign the flv to start playing your first flv and increment the index in a function that executes when an flv complete and play that array element until all are played.  you'll publish your html and swf from that fla." 
    And he gave me a code sample which is below... modified to show my "instance" name as FlvChain
    and my flv file names... vid1.flv, vid2.flv, and vid3.flv...
    My code...
    import fl.video.VideoEvent;
    var flvA:Array=["vid1.flv","vid2.flv","vid3.flv"];
    var index:uint=0;
    FlvChain.source=flvA[index];
    FlvChain.addEventListener(VideoEvent.COMPLETE,completeF){
    index++;
    if(index<flvA.length){
    FlvChain.source=flvA[index];
    } else {
    // all flvs played
    When I attempt to Debug I get this message...
    "1087: Syntax error: extra characters found after end of program."
    I'm sure I made a silly error. I've never done AS before I'm running CS3 & AS3 on a PC with XP Pro.
    Thanks for any help.

    use:
    import fl.video.VideoEvent;
    var flvA:Array=["vid1.flv","vid2.flv","vid3.flv"];
    var index:uint=0;
    FlvChain.source=flvA[index];
    FlvChain.addEventListener(VideoEvent.COMPLETE,completeF);
    function completeF(e:VideoEvent)
    index++;
    if(index<flvA.length){
    FlvChain.source=flvA[index];
    } else {
    // all flvs played

  • Compilation Error for Login code

    hi!
    Can someone help me debug this?
    C:\JRun4\servers\default\default-ear\default-war\WEB-INF\classes>javac -deprecat
    ion Login.java
    Login.java:46: warning: putValue(java.lang.String,java.lang.Object) in javax.ser
    vlet.http.HttpSession has been deprecated
    userSession.putValue("userName", uName);
    ^
    Login.java:26: unreported exception java.sql.SQLException; must be caught or dec
    lared to be thrown
    String uName = validateUser(userId, password);
    ^
    Login.java:66: unreported exception java.lang.ClassNotFoundException; must be ca
    ught or declared to be thrown
    Class.forName("org.gjt.mm.mysql.Driver");
    ^
    2 errors
    1 warning
    import java.io.*;
    import java.sql.*;
    import javax.sql.*;
    import java.lang.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    public class Login extends HttpServlet{
    public void doPost(HttpServletRequest req, HttpServletResponse res)
                   throws ServletException,IOException{
    String userId = req.getParameter("userId");
    String password = req.getParameter("password");
    ** call a method to validate the password which will return the
    ** User Name for authorized users and null string for un-authorised.
    String uName = validateUser(userId, password);
    // if uName is null .. user is not authorized.
    if (uName == null)
         PrintWriter ot = res.getWriter();
    System.out.println(" Please verify the Userid and password");
    System.out.close();
    else
    // So the user is valid let's create a seesion // for this user.
    HttpSession userSession = req.getSession(true);
    // put the user name session variable.
    userSession.putValue("userName", uName);
    // now we need to transfer the control to welcome.jsp
    RequestDispatcher rd =
         getServletContext().getRequestDispatcher("/welcome.jsp");
    if (rd != null)
         rd.forward(req,res);
    }// end of doPost
    public String validateUser(String inputUserid, String inputPwd)
    throws SQLException{
         String returnString = null;
         Class.forName("org.gjt.mm.mysql.Driver");
    Connection con = DriverManager.getConnection("jdbc:mysql://localhost:3306/test", "test","test");
         Statement stmt = con.createStatement();
         String sql= "select USERID from USERTABLE where USERID = '" +
              inputUserid + "' and PASSWORD = '" + inputPwd +"' ;" ;
         ResultSet rs = stmt.executeQuery(sql);
         if (rs.next())
         returnString = rs.getString("USERID");
         stmt.close();
         con.close();
         return returnString ;
    }// end of servlet class
    Thank you!
    I'm using Win98 , JDK1.3 and Jrun4
    I also have j2sdkee1.2.1
    (if that matters)
    Dewi

    Hi,
    Put try catch block in your code and it will work fine.Please look at the code changes in your code.You find try-catch blocks.
    import java.io.*;
    import java.sql.*;
    import javax.sql.*;
    import java.lang.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    public class Login extends HttpServlet{
    public void doPost(HttpServletRequest req, HttpServletResponse res)
    throws ServletException,IOException{
    String userId = req.getParameter("userId");
    String password = req.getParameter("password");
    ** call a method to validate the password which will return the
    ** User Name for authorized users and null string for un-authorised.
    String uName = validateUser(userId, password);
    // if uName is null .. user is not authorized.
    if (uName == null)
    PrintWriter ot = res.getWriter();
    System.out.println(" Please verify the Userid and password");
    System.out.close();
    else
    // So the user is valid let's create a seesion // for this user.
    HttpSession userSession = req.getSession(true);
    // put the user name session variable.
    userSession.putValue("userName", uName);
    // now we need to transfer the control to welcome.jsp
    RequestDispatcher rd =
    getServletContext().getRequestDispatcher("/welcome.jsp");
    if (rd != null)
    rd.forward(req,res);
    }// end of doPost
    public String validateUser(String inputUserid, String inputPwd)
    String returnString = null;
    try{
    Class.forName("org.gjt.mm.mysql.Driver");
    }catch(ClassNotFoundException){
    System.out.println("An exception occurred ");
    Connection con = DriverManager.getConnection ("jdbc:mysql://localhost:3306/test", "test","test");
    Statement stmt = con.createStatement();
    try
    String sql= "select USERID from USERTABLE where USERID = '" +
    inputUserid + "' and PASSWORD = '" + inputPwd +"' ;" ;
    ResultSet rs = stmt.executeQuery(sql);
    if (rs.next())
    returnString = rs.getString("USERID");
    stmt.close();
    con.close();
    return returnString ;
    }catch(SQLException sqe){
    System.out.println("SQL Exception "+sqe.getMessage());
    }// end of servlet class
    Cheers,
    Rkanth

  • [SOLVED] Php.ini syntax error, unexpected '&'

    Hi guys,
    I'm having a trouble setting up a local hosted LAMP, I want to enable the error reporting and display, but it's giving me this error:
    [root@albert albert]# php
    PHP: syntax error, unexpected '&' in /etc/php/php.ini on line 105
    Line 105:
    ; error_reporting
    Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED ; this is the 105
    Development Value: E_ALL
    Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    And when I access to on localhost/phpmyadmin:
    Fatal error: Call to undefined function PMA_DBI_num_rows() in /usr/share/webapps/phpMyAdmin/libraries/navigation/Nodes/Node.class.php on line 408
    When I comment the line 105,106,107, it works as I expected, but I can't see any error output...
    Here it's the entire php.ini:
    [PHP]
    ; About php.ini ;
    ; PHP's initialization file, generally called php.ini, is responsible for
    ; configuring many of the aspects of PHP's behavior.
    ; PHP attempts to find and load this configuration from a number of locations.
    ; The following is a summary of its search order:
    ; 1. SAPI module specific location.
    ; 2. The PHPRC environment variable. (As of PHP 5.2.0)
    ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
    ; 4. Current working directory (except CLI)
    ; 5. The web server's directory (for SAPI modules), or directory of PHP
    ; (otherwise in Windows)
    ; 6. The directory from the --with-config-file-path compile time option, or the
    ; Windows directory (C:\windows or C:\winnt)
    ; See the PHP docs for more specific information.
    ; http://php.net/configuration.file
    ; The syntax of the file is extremely simple. Whitespace and lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives following the section heading [PATH=/www/mysite] only
    ; apply to PHP files in the /www/mysite directory. Directives
    ; following the section heading [HOST=www.example.com] only apply to
    ; PHP files served from www.example.com. Directives set in these
    ; special sections cannot be overridden by user-defined INI files or
    ; at runtime. Currently, [PATH=] and [HOST=] sections only work under
    ; CGI/FastCGI.
    ; http://php.net/ini.sections
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; Directives are variables used to configure PHP or PHP extensions.
    ; There is no name validation. If PHP can't find an expected
    ; directive because it is not set or is mistyped, a default value will be used.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
    ; previously set variable or directive (e.g. ${foo})
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; ^ bitwise XOR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = None ; sets foo to an empty string
    ; foo = "None" ; sets foo to the string 'None'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; PHP comes packaged with two INI files. One that is recommended to be used
    ; in production environments and one that is recommended to be used in
    ; development environments.
    ; php.ini-production contains settings which hold security, performance and
    ; best practices at its core. But please be aware, these settings may break
    ; compatibility with older or less security conscience applications. We
    ; recommending using the production ini in production and testing environments.
    ; php.ini-development is very similar to its production variant, except it's
    ; much more verbose when it comes to errors. We recommending using the
    ; development version only in development environments as errors shown to
    ; application users can inadvertently leak otherwise secure information.
    ; Quick Reference ;
    ; The following are all the settings which are different in either the production
    ; or development versions of the INIs with respect to PHP's default behavior.
    ; Please see the actual settings later in the document for more details as to why
    ; we recommend these changes in PHP's behavior.
    ; display_errors
    Default Value: On
    Development Value: On
    Production Value: Off
    ; display_startup_errors
    Default Value: Off
    Development Value: On
    Production Value: Off
    ; error_reporting
    Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    Development Value: E_ALL
    Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; html_errors
    Default Value: On
    Development Value: On
    Production value: On
    ; log_errors
    Default Value: Off
    Development Value: On
    Production Value: On
    ; max_input_time
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; output_buffering
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; register_argc_argv
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; request_order
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; session.bug_compat_42
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; session.bug_compat_warn
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; session.gc_divisor
    ; Default Value: 100
    ; Development Value: 1000
    ; Production Value: 1000
    ; session.hash_bits_per_character
    ; Default Value: 4
    ; Development Value: 5
    ; Production Value: 5
    ; short_open_tag
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; track_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; url_rewriter.tags
    ; Default Value: "a=href,area=href,frame=src,form=,fieldset="
    ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; variables_order
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS"
    ; php.ini Options ;
    ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
    ;user_ini.filename = ".user.ini"
    ; To disable this feature set this option to empty value
    ;user_ini.filename =
    ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
    ;user_ini.cache_ttl = 300
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    ; http://php.net/engine
    engine = On
    ; This directive determines whether or not PHP will recognize code between
    ; <? and ?> tags as PHP source which should be processed as such. It's been
    ; recommended for several years that you not use the short tag "short cut" and
    ; instead to use the full <?php and ?> tag combination. With the wide spread use
    ; of XML and use of these tags by other languages, the server can become easily
    ; confused and end up parsing the wrong code in the wrong context. But because
    ; this short cut has been a feature for such a long time, it's currently still
    ; supported for backwards compatibility, but we recommend you don't use them.
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/short-open-tag
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    ; http://php.net/asp-tags
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    ; http://php.net/precision
    precision = 14
    ; Output buffering is a mechanism for controlling how much output data
    ; (excluding headers and cookies) PHP should keep internally before pushing that
    ; data to the client. If your application's output exceeds this setting, PHP
    ; will send that data in chunks of roughly the size you specify.
    ; Turning on this setting and managing its maximum buffer size can yield some
    ; interesting side-effects depending on your application and web server.
    ; You may be able to send headers and cookies after you've already sent output
    ; through print or echo. You also may see performance benefits if your server is
    ; emitting less packets due to buffered output versus PHP streaming the output
    ; as it gets it. On production servers, 4096 bytes is a good setting for performance
    ; reasons.
    ; Note: Output buffering can also be controlled via Output Buffering Control
    ; functions.
    ; Possible Values:
    ; On = Enabled and buffer is unlimited. (Use with caution)
    ; Off = Disabled
    ; Integer = Enables the buffer and sets its maximum size in bytes.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; http://php.net/output-buffering
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ; http://php.net/output-handler
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    ; http://php.net/zlib.output-compression
    zlib.output_compression = Off
    ; http://php.net/zlib.output-compression-level
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ; http://php.net/zlib.output-handler
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    ; http://php.net/implicit-flush
    ; Note: This directive is hardcoded to On for the CLI SAPI
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated. A warning appears if the specified function is
    ; not defined, or if the function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func =
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 17
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/open-basedir
    open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/:/home/albert/Dropbox/bitday/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-functions
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-classes
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ; http://php.net/syntax-highlighting
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long requests, which may end up
    ; being interrupted by the user or a browser timing out. PHP's default behavior
    ; is to disable this feature.
    ; http://php.net/ignore-user-abort
    ;ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; http://php.net/realpath-cache-size
    ;realpath_cache_size = 16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; http://php.net/realpath-cache-ttl
    ;realpath_cache_ttl = 120
    ; Enables or disables the circular reference collector.
    ; http://php.net/zend.enable-gc
    zend.enable_gc = On
    ; If enabled, scripts may be written in encodings that are incompatible with
    ; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
    ; encodings. To use this feature, mbstring extension must be enabled.
    ; Default: Off
    ;zend.multibyte = Off
    ; Allows to set the default encoding for the scripts. This value will be used
    ; unless "declare(encoding=...)" directive appears at the top of the script.
    ; Only affects if zend.multibyte is set.
    ; Default: ""
    ;zend.script_encoding =
    ; Miscellaneous ;
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    ; http://php.net/expose-php
    expose_php = On
    ; Resource Limits ;
    ; Maximum execution time of each script, in seconds
    ; http://php.net/max-execution-time
    ; Note: This directive is hardcoded to 0 for the CLI SAPI
    max_execution_time = 30
    ; Maximum amount of time each script may spend parsing request data. It's a good
    ; idea to limit this time on productions servers in order to eliminate unexpectedly
    ; long running scripts.
    ; Note: This directive is hardcoded to -1 for the CLI SAPI
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; http://php.net/max-input-time
    max_input_time = 60
    ; Maximum input variable nesting level
    ; http://php.net/max-input-nesting-level
    ;max_input_nesting_level = 64
    ; How many GET/POST/COOKIE input variables may be accepted
    ; max_input_vars = 1000
    ; Maximum amount of memory a script may consume (128MB)
    ; http://php.net/memory-limit
    memory_limit = 128M
    ; Error handling and logging ;
    ; This directive informs PHP of which errors, warnings and notices you would like
    ; it to take action for. The recommended way of setting values for this
    ; directive is through the use of the error level constants and bitwise
    ; operators. The error level constants are below here for convenience as well as
    ; some common settings and their meanings.
    ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
    ; those related to E_NOTICE and E_STRICT, which together cover best practices and
    ; recommended coding standards in PHP. For performance reasons, this is the
    ; recommend error reporting setting. Your production server shouldn't be wasting
    ; resources complaining about best practices and coding standards. That's what
    ; development servers and development settings are for.
    ; Note: The php.ini-development file has this setting as E_ALL. This
    ; means it pretty much reports everything which is exactly what you want during
    ; development and early testing.
    ; Error Level Constants:
    ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; E_DEPRECATED - warn about code that will not work in future versions
    ; of PHP
    ; E_USER_DEPRECATED - user-generated deprecation warnings
    ; Common Values:
    ; E_ALL (Show all errors, warnings and notices including coding standards.)
    ; E_ALL & ~E_NOTICE (Show all errors, except for notices)
    ; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
    ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
    ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    ; Development Value: E_ALL
    ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; http://php.net/error-reporting
    error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; This directive controls whether or not and where PHP will output errors,
    ; notices and warnings too. Error output is very useful during development, but
    ; it could be very dangerous in production environments. Depending on the code
    ; which is triggering the error, sensitive information could potentially leak
    ; out of your application such as database usernames and passwords or worse.
    ; It's recommended that errors be logged on production servers rather than
    ; having the errors sent to STDOUT.
    ; Possible Values:
    ; Off = Do not display any errors
    ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout = Display errors to STDOUT
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-errors
    display_errors = Off
    ; The display of errors which occur during PHP's startup sequence are handled
    ; separately from display_errors. PHP's default behavior is to suppress those
    ; errors from clients. Turning the display of startup errors on can be useful in
    ; debugging configuration problems. But, it's strongly recommended that you
    ; leave this setting off on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-startup-errors
    display_startup_errors = Off
    ; Besides displaying errors, PHP can also log errors to locations such as a
    ; server-specific log, STDERR, or a location specified by the error_log
    ; directive found below. While errors should not be displayed on productions
    ; servers they should still be monitored and logging is a great way to do that.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: On
    ; http://php.net/log-errors
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    ; http://php.net/log-errors-max-len
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line unless ignore_repeated_source is set true.
    ; http://php.net/ignore-repeated-errors
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ; http://php.net/ignore-repeated-source
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    ; http://php.net/report-memleaks
    report_memleaks = On
    ; This setting is on by default.
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean). Setting this value
    ; to On can assist in debugging and is appropriate for development servers. It should
    ; however be disabled on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/track-errors
    track_errors = Off
    ; Turn off normal error reporting and emit XML-RPC error XML
    ; http://php.net/xmlrpc-errors
    ;xmlrpc_errors = 0
    ; An XML-RPC faultCode
    ;xmlrpc_error_number = 0
    ; When PHP displays or logs an error, it has the capability of formatting the
    ; error message as HTML for easier reading. This directive controls whether
    ; the error message is formatted as HTML or not.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: On
    ; Development Value: On
    ; Production value: On
    ; http://php.net/html-errors
    html_errors = On
    ; If html_errors is set to On *and* docref_root is not empty, then PHP
    ; produces clickable error messages that direct to a page describing the error
    ; or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://php.net/docs
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot. PHP's default behavior is to leave these settings empty, in which
    ; case no links to documentation are generated.
    ; Note: Never use this feature for production boxes.
    ; http://php.net/docref-root
    ; Examples
    ;docref_root = "/phpmanual/"
    ; http://php.net/docref-ext
    ;docref_ext = .html
    ; String to output before an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-prepend-string
    ; Example:
    ;error_prepend_string = "<span style='color: #ff0000'>"
    ; String to output after an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-append-string
    ; Example:
    ;error_append_string = "</span>"
    ; Log errors to specified file. PHP's default behavior is to leave this value
    ; empty.
    ; http://php.net/error-log
    ; Example:
    ;error_log = php_errors.log
    ; Log errors to syslog (Event Log on NT, not valid in Windows 95).
    ;error_log = syslog
    ;windows.show_crt_warning
    ; Default value: 0
    ; Development value: 0
    ; Production value: 0
    ; Data Handling ;
    ; The separator used in PHP generated URLs to separate arguments.
    ; PHP's default setting is "&".
    ; http://php.net/arg-separator.output
    ; Example:
    ;arg_separator.output = "&amp;"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; PHP's default setting is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ; http://php.net/arg-separator.input
    ; Example:
    ;arg_separator.input = ";&"
    ; This directive determines which super global arrays are registered when PHP
    ; starts up. G,P,C,E & S are abbreviations for the following respective super
    ; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
    ; paid for the registration of these arrays and because ENV is not as commonly
    ; used as the others, ENV is not recommended on productions servers. You
    ; can still get access to the environment variables through getenv() should you
    ; need to.
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS";
    ; http://php.net/variables-order
    variables_order = "GPCS"
    ; This directive determines which super global data (G,P,C,E & S) should
    ; be registered into the super global array REQUEST. If so, it also determines
    ; the order in which that data is registered. The values for this directive are
    ; specified in the same manner as the variables_order directive, EXCEPT one.
    ; Leaving this value empty will cause PHP to use the value set in the
    ; variables_order directive. It does not mean it will leave the super globals
    ; array REQUEST empty.
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; http://php.net/request-order
    request_order = "GP"
    ; This directive determines whether PHP registers $argv & $argc each time it
    ; runs. $argv contains an array of all the arguments passed to PHP when a script
    ; is invoked. $argc contains an integer representing the number of arguments
    ; that were passed when the script was invoked. These arrays are extremely
    ; useful when running scripts from the command line. When this directive is
    ; enabled, registering these variables consumes CPU cycles and memory each time
    ; a script is executed. For performance reasons, this feature should be disabled
    ; on production servers.
    ; Note: This directive is hardcoded to On for the CLI SAPI
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/register-argc-argv
    register_argc_argv = Off
    ; When enabled, the ENV, REQUEST and SERVER variables are created when they're
    ; first used (Just In Time) instead of when the script starts. If these
    ; variables are not used within a script, having this directive on will result
    ; in a performance gain. The PHP directive register_argc_argv must be disabled
    ; for this directive to have any affect.
    ; http://php.net/auto-globals-jit
    auto_globals_jit = On
    ; Whether PHP will read the POST data.
    ; This option is enabled by default.
    ; Most likely, you won't want to disable this option globally. It causes $_POST
    ; and $_FILES to always be empty; the only way you will be able to read the
    ; POST data will be through the php://input stream wrapper. This can be useful
    ; to proxy requests or to process the POST data in a memory efficient fashion.
    ; http://php.net/enable-post-data-reading
    ;enable_post_data_reading = Off
    ; Maximum size of POST data that PHP will accept.
    ; Its value may be 0 to disable the limit. It is ignored if POST data reading
    ; is disabled through enable_post_data_reading.
    ; http://php.net/post-max-size
    post_max_size = 8M
    ; Automatically add files before PHP document.
    ; http://php.net/auto-prepend-file
    auto_prepend_file =
    ; Automatically add files after PHP document.
    ; http://php.net/auto-append-file
    auto_append_file =
    ; By default, PHP will output a character encoding using
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    ; http://php.net/default-mimetype
    default_mimetype = "text/html"
    ; PHP's default character set is set to empty.
    ; http://php.net/default-charset
    ;default_charset = "UTF-8"
    ; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
    ; to disable this feature. If post reading is disabled through
    ; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
    ; http://php.net/always-populate-raw-post-data
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; Windows: "\path1;\path2"
    ;include_path = ".;c:\php\includes"
    ; PHP's default setting for include_path is ".;/path/to/php/pear"
    ; http://php.net/include-path
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    ; http://php.net/doc-root
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    ; http://php.net/user-dir
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    ; http://php.net/extension-dir
    extension_dir = "/usr/lib/php/modules/"
    ; On windows:
    ; extension_dir = "ext"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    ; http://php.net/enable-dl
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; http://php.net/cgi.force-redirect
    ;cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request. PHP's default behavior is to disable this feature.
    ;cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; http://php.net/cgi.redirect-status-env
    ;cgi.redirect_status_env =
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    ; http://php.net/cgi.fix-pathinfo
    ;cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; http://php.net/fastcgi.impersonate
    ;fastcgi.impersonate = 1
    ; Disable logging through FastCGI connection. PHP's default behavior is to enable
    ; this feature.
    ;fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ; http://php.net/cgi.rfc2616-headers
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    ; http://php.net/file-uploads
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ; http://php.net/upload-tmp-dir
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    ; http://php.net/upload-max-filesize
    upload_max_filesize = 2M
    ; Maximum number of files that can be uploaded via a single request
    max_file_uploads = 20
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-fopen
    allow_url_fopen = On
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-include
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address). PHP's default setting
    ; for this is empty.
    ; http://php.net/from
    ;from="[email protected]"
    ; Define the User-Agent string. PHP's default setting for this is empty.
    ; http://php.net/user-agent
    ;user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    ; http://php.net/default-socket-timeout
    default_socket_timeout = 60
    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; http://php.net/auto-detect-line-endings
    ;auto_detect_line_endings = Off
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, on Windows:
    ; extension=msql.dll
    ; ... or under UNIX:
    ; extension=msql.so
    ; ... or with a path:
    ; extension=/path/to/extension/msql.so
    ; If you only provide the name of the extension, PHP will look for it in its
    ; default extension directory.
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    extension=curl.so
    ;extension=dba.so
    ;extension=enchant.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=gmp.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=intl.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mssql.so
    ;extension=mysqli.so
    ;extension=mysql.so
    ;extension=odbc.so
    ;extension=openssl.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=phar.so
    ;extension=posix.so
    ;extension=pspell.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    ;extension=sockets.so
    ;extension=sqlite3.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    ; Module Settings ;
    [CLI Server]
    ; Whether the CLI web server uses ANSI color coding in its terminal output.
    cli_server.color = On
    [Date]
    ; Defines the default timezone used by the date functions
    ; http://php.net/date.timezone
    ;date.timezone =
    ; http://php.net/date.default-latitude
    ;date.default_latitude = 31.7667
    ; http://php.net/date.default-longitude
    ;date.default_longitude = 35.2333
    ; http://php.net/date.sunrise-zenith
    ;date.sunrise_zenith = 90.583333
    ; http://php.net/date.sunset-zenith
    ;date.sunset_zenith = 90.583333
    [filter]
    ; http://php.net/filter.default
    ;filter.default = unsafe_raw
    ; http://php.net/filter.default-flags
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [intl]
    ;intl.default_locale =
    ; This directive allows you to produce PHP errors when some error
    ; happens within intl functions. The value is the level of the error produced.
    ; Default is 0, which does not produce any errors.
    ;intl.error_level = E_WARNING
    [sqlite]
    ; http://php.net/sqlite.assoc-case
    ;sqlite.assoc_case = 0
    [sqlite3]
    ;sqlite3.extension_dir =
    [Pcre]
    ;PCRE library backtracking limit.
    ; http://php.net/pcre.backtrack-limit
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ; http://php.net/pcre.recursion-limit
    ;pcre.recursion_limit=100000
    [Pdo]
    ; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
    ; http://php.net/pdo-odbc.connection-pooling
    ;pdo_odbc.connection_pooling=strict
    ;pdo_odbc.db2_instance_name
    [Pdo_mysql]
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/pdo_mysql.cache_size
    pdo_mysql.cache_size = 2000
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/pdo_mysql.default-socket
    pdo_mysql.default_socket=
    [Phar]
    ; http://php.net/phar.readonly
    ;phar.readonly = On
    ; http://php.net/phar.require-hash
    ;phar.require_hash = On
    ;phar.cache_list =
    [mail function]
    ; For Win32 only.
    ; http://php.net/smtp
    SMTP = localhost
    ; http://php.net/smtp-port
    smtp_port = 25
    ; For Win32 only.
    ; http://php.net/sendmail-from
    ;sendmail_from = [email protected]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ; http://php.net/sendmail-path
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
    mail.add_x_header = On
    ; The path to a log file that will log all mail() calls. Log entries include
    ; the full path of the script, line number, To address and headers.
    ;mail.log =
    ; Log mail to syslog (Event Log on NT, not valid in Windows 95).
    ;mail.log = syslog
    [SQL]
    ; http://php.net/sql.safe-mode
    sql.safe_mode = Off
    [ODBC]
    ; http://php.net/odbc.default-db
    ;odbc.default_db = Not yet implemented
    ; http://php.net/odbc.default-user
    ;odbc.default_user = Not yet implemented
    ; http://php.net/odbc.default-pw
    ;odbc.default_pw = Not yet implemented
    ; Controls the ODBC cursor model.
    ; Default: SQL_CURSOR_STATIC (default).
    ;odbc.default_cursortype
    ; Allow or prevent persistent links.
    ; http://php.net/odbc.allow-persistent
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    ; http://php.net/odbc.check-persistent
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/odbc.max-persistent
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/odbc.max-links
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    ; http://php.net/odbc.defaultlrl
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of odbc.defaultlrl and odbc.defaultbinmode
    ; http://php.net/odbc.defaultbinmode
    odbc.defaultbinmode = 1
    ;birdstep.max_links = -1
    [Interbase]
    ; Allow or prevent persistent links.
    ibase.allow_persistent = 1
    ; Maximum number of persistent links. -1 means no limit.
    ibase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ibase.max_links = -1
    ; Default database name for ibase_connect().
    ;ibase.default_db =
    ; Default username for ibase_connect().
    ;ibase.default_user =
    ; Default password for ibase_connect().
    ;ibase.default_password =
    ; Default charset for ibase_connect().
    ;ibase.default_charset =
    ; Default timestamp format.
    ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
    ; Default date format.
    ibase.dateformat = "%Y-%m-%d"
    ; Default time format.
    ibase.timeformat = "%H:%M:%S"
    [MySQL]
    ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
    ; http://php.net/mysql.allow_local_infile
    mysql.allow_local_infile = On
    ; Allow or prevent persistent links.
    ; http://php.net/mysql.allow-persistent
    mysql.allow_persistent = On
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/mysql.cache_size
    mysql.cache_size = 2000
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/mysql.max-persistent
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/mysql.max-links
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    ; http://php.net/mysql.default-port
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/mysql.default-socket
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysql.default-host
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysql.default-user
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    ; http://php.net/mysql.default-password
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    ; http://php.net/mysql.connect-timeout
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    ; http://php.net/mysql.trace-mode
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/mysqli.max-persistent
    mysqli.max_persistent = -1
    ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
    ; http://php.net/mysqli.allow_local_infile
    ;mysqli.allow_local_infile = On
    ; Allow or prevent persistent links.
    ; http://php.net/mysqli.allow-persistent
    mysqli.allow_persistent = On
    ; Maximum number of links. -1 means no limit.
    ; http://php.net/mysqli.max-links
    mysqli.max_links = -1
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/mysqli.cache_size
    mysqli.cache_size = 2000
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    ; http://php.net/mysqli.default-port
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/mysqli.default-socket
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysqli.default-host
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysqli.default-user
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    ; http://php.net/mysqli.default-pw
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mysqlnd]
    ; Enable / Disable collection of general statistics by mysqlnd which can be
    ; used to tune and monitor MySQL operations.
    ; http://php.net/mysqlnd.collect_statistics
    mysqlnd.collect_statistics = On
    ; Enable / Disable collection of memory usage statistics by mysqlnd which can be
    ; used to tune and monitor MySQL operations.
    ; http://php.net/mysqlnd.collect_memory_statistics
    mysqlnd.collect_memory_statistics = Off
    ; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
    ; http://php.net/mysqlnd.net_cmd_buffer_size
    ;mysqlnd.net_cmd_buffer_size = 2048
    ; Size of a pre-allocated buffer used for reading data sent by the server in
    ; bytes.
    ; http://php.net/mysqlnd.net_read_buffer_size
    ;mysqlnd.net_read_buffer_size = 32768
    [OCI8]
    ; Connection: Enables privileged connections using external
    ; credentials (OCI_SYSOPER, OCI_SYSDBA)
    ; http://php.net/oci8.privileged-connect
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ; http://php.net/oci8.max-persistent
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ; http://php.net/oci8.persistent-timeout
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ; http://php.net/oci8.ping-interval
    ;oci8.ping_interval = 60
    ; Connection: Set this to a user chosen connection class to be used
    ; for all pooled server requests with Oracle 11g Database Resident
    ; Connection Pooling (DRCP). To use DRCP, this value should be set to
    ; the same string for all web servers running the same application,
    ; the database pool must be configured, and the connection string must
    ; specify to use a pooled server.
    ;oci8.connection_class =
    ; High Availability: Using On lets PHP receive Fast Application
    ; Notification (FAN) events generated when a database node fails. The
    ; database must also be configured to post FAN events.
    ;oci8.events = Off
    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ; http://php.net/oci8.statement-cache-size
    ;oci8.statement_cache_size = 20
    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ; http://php.net/oci8.default-prefetch
    ;oci8.default_prefetch = 100
    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ; http://php.net/oci8.old-oci-close-semantics
    ;oci8.old_oci_close_semantics = Off
    [PostgreSQL]
    ; Allow or prevent persistent links.
    ; http://php.net/pgsql.allow-persistent
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    ; http://php.net/pgsql.auto-reset-persistent
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/pgsql.max-persistent
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    ; http://php.net/pgsql.max-links
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    ; http://php.net/pgsql.ignore-notice
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Notice message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    ; http://php.net/pgsql.log-notice
    pgsql.log_notice = 0
    [Sybase-CT]
    ; Allow or prevent persistent links.
    ; http://php.net/sybct.allow-persistent
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/sybct.max-persistent
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/sybct.max-links
    sybct.max_links = -1
    ; Minimum server message severity to display.
    ; http://php.net/sybct.min-server-severity
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    ; http://php.net/sybct.min-client-severity
    sybct.min_client_severity = 10
    ; Set per-context timeout
    ; http://php.net/sybct.timeout
    ;sybct.timeout=
    ;sybct.packet_size
    ; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
    ; Default: one minute
    ;sybct.login_timeout=
    ; The name of the host you claim to be connecting from, for display by sp_who.
    ; Default: none
    ;sybct.hostname=
    ; Allows you to define how often deadlocks are to be retried. -1 means "forever".
    ; Default: 0
    ;sybct.deadlock_retry_count=
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    ; http://php.net/bcmath.scale
    bcmath.scale = 0
    [browscap]
    ; http://php.net/browscap
    ;browscap = extra/browscap.ini
    [Session]
    ; Handler used to store/retrieve data.
    ; http://php.net/session.save-handler
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored. Note: Windows users have to change this
    ; variable in order to use PHP's session functions.
    ; The path can be defined as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    ; http://php.net/session.save-path
    ;session.save_path = "/tmp"
    ; Whether to use cookies.
    ; http://php.net/session.use-cookies
    session.use_cookies = 1
    ; http://php.net/session.cookie-secure
    ;session.cookie_secure =
    ; This option forces PHP to fetch and use a cookie for storing and maintaining
    ; the session id. We encourage this operation as it's very helpful in combating
    ; session hijacking when not specifying and managing your own session id. It is
    ; not the end all be all of session hijacking defense, but it's a good start.
    ; http://php.net/session.use-only-cookies
    session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    ; http://php.net/session.name
    session.name = PHPSESSID
    ; Initialize session on request startup.
    ; http://php.net/session.auto-start
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    ; http://php.net/session.cookie-lifetime
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    ; http://php.net/session.cookie-path
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    ; http://php.net/session.cookie-domain
    session.cookie_domain =
    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    ; http://php.net/session.cookie-httponly
    session.cookie_httponly =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    ; http://php.net/session.serialize-handler
    session.serialize_handler = php
    ; Defines the probability that the 'garbage collection' process is started
    ; on every session initialization. The probability is calculated by using
    ; gc_probability/gc_divisor. Where session.gc_probability is the numerator
    ; and gc_divisor is the denominator in the equation. Setting this value to 1
    ; when the session.gc_divisor value is 100 will give you approximately a 1% chance
    ; the gc will run on any give request.
    ; Default Value: 1
    ; Development Value: 1
    ; Production Value: 1
    ; http://php.net/session.gc-probability
    session.gc_probability = 1
    ; Defines the probability that the 'garbage collection' process is started on every
    ; session initialization. The probability is calculated by using the following equation:
    ; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
    ; session.gc_divisor is the denominator in the equation. Setting this value to 1
    ; when the session.gc_divisor value is 100 will give you approximately a 1% chance
    ; the gc will run on any give request. Increasing this value to 1000 will give you
    ; a 0.1% chance the gc will run on any give request. For high volume production servers,
    ; this is a more efficient approach.
    ; Default Value: 100
    ; Development Value: 1000
    ; Production Value: 1000
    ; http://php.net/session.gc-divisor
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    ; http://php.net/session.gc-maxlifetime
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; find /path/to/sessions -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope.
    ; PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled. This feature
    ; introduces some serious security problems if not handled correctly. It's
    ; recommended that you do not use this feature on production servers. But you
    ; should enable this on development servers and enable the warning as well. If you
    ; do not enable the feature on development servers, you won't be warned when it's
    ; used and debugging errors caused by this can be difficult to track down.
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/session.bug-compat-42
    session.bug_compat_42 = Off
    ; This setting controls whether or not you are warned by PHP when initializing a
    ; session value into the global space. session.bug_compat_42 must be enabled before
    ; these warnings can be issued by PHP. See the directive above for more information.
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/session.bug-compat-warn
    session.bug_compat_warn = Off
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    ; http://php.net/session.referer-check
    session.referer_check =
    ; How many bytes to read from the file.
    ; http://php.net/session.entropy-length
    ;session.entropy_length = 32
    ; Specified here to create the session id.
    ; http://php.net/session.entropy-file
    ; Defaults to /dev/urandom
    ; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
    ; If neither are found at compile time, the default is no entropy file.
    ; On windows, setting the entropy_length setting will activate the
    ; Windows random source (using the CryptoAPI)
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    ; http://php.net/session.cache-limiter
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    ; http://php.net/session.cache-expire
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publicly accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    ; http://php.net/session.use-trans-sid
    session.use_trans_sid = 0
    ; Select a hash function for use in generating session ids.
    ; Possible Values
    ; 0 (MD5 128 bits)
    ; 1 (SHA-1 160 bits)
    ; This option may also be set to the name of any hash function supported by
    ; the hash extension. A list of available hashes is returned by the hash_algos()
    ; function.
    ; http://php.net/session.hash-function
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; Possible values:
    ; 4 (4 bits: 0-9, a-f)
    ; 5 (5 bits: 0-9, a-v)
    ; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
    ; Default Value: 4
    ; Development Value: 5
    ; Production Value: 5
    ; http://php.net/session.hash-bits-per-character
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    ; Default Value: "a=href,area=href,frame=src,form=,fieldset="
    ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; http://php.net/url-rewriter.tags
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; Enable upload progress tracking in $_SESSION
    ; Default Value: On
    ; Development Value: On
    ; Production Value: On
    ; http://php.net/session.upload-progress.enabled
    ;session.upload_progress.enabled = On
    ; Cleanup the progress information as soon as all POST data has been read
    ; (i.e. upload completed).
    ; Default Value: On
    ; Development Value: On
    ; Production Value: On
    ; http://php.net/session.upload-progress.cleanup
    ;session.upload_progress.cleanup = On
    ; A prefix used for the upload progress key in $_SESSION
    ; Default Value: "upload_progress_"
    ; Development Value: "upload_progress_"
    ; Production Value: "upload_progress_"
    ; http://php.net/session.upload-progress.prefix
    ;session.upload_progress.prefix = "upload_progress_"
    ; The index name (concatenated with the prefix) in $_SESSION
    ; containing the upload progress information
    ; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
    ; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
    ; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
    ; http://php.net/session.upload-progress.name
    ;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
    ; How frequently the upload progress should be updated.
    ; Given either in percentages (per-file), or in bytes
    ; Default Value: "1%"
    ; Development Value: "1%"
    ; Production Value: "1%"
    ; http://php.net/session.upload-progress.freq
    ;session.upload_progress.freq = "1%"
    ; The minimum delay between updates, in seconds
    ; Default Value: 1
    ; Development Value: 1
    ; Production Value: 1
    ; http://php.net/session.upload-progress.min-freq
    ;session.upload_progress.min_freq = "1"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1
    ; Specify client character set.
    ; If empty or not set the client charset from freetds.conf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"
    [Assertion]
    ; Assert(expr); active by default.
    ; http://php.net/assert.active
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ; http://php.net/assert.warning
    ;assert.warning = On
    ; Don't bail out by default.
    ; http://php.net/assert.bail
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ; http://php.net/assert.callback
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ; http://php.net/assert.quiet-eval
    ;assert.quiet_eval = 0
    [COM]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ; http://php.net/com.typelib-file
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ; http://php.net/com.allow-dcom
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ; http://php.net/com.autoregister-typelib
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ; http://php.net/com.autoregister-casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ; http://php.net/com.autoregister-verbose
    ;com.autoregister_verbose = true
    ; The default character set code-page to use when passing strings to and from COM objects.
    ; Default: system ANSI code page
    ;com.code_page=
    [mbstring]
    ; language for internal character representation.
    ; http://php.net/mbstring.language
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ; http://php.net/mbstring.internal-encoding
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ; http://php.net/mbstring.http-input
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ; http://php.net/mbstring.http-output
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ; http://php.net/mbstring.encoding-translation
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ; http://php.net/mbstring.detect-order
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ; http://php.net/mbstring.substitute-character
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ; http://php.net/mbstring.func-overload
    ;mbstring.func_overload = 0
    ; enable strict encoding detection.
    ;mbstring.strict_detection = Off
    ; This directive specifies the regex pattern of content types for which mb_output_handler()
    ; is activated.
    ; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
    ;mbstring.http_output_conv_mimetype=
    [gd]
    ; Tell the jpeg decode to ignore warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ; http://php.net/gd.jpeg-ignore-warning
    ;gd.jpeg_ignore_warning = 0
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings

    Hi, everything in the "Quick Reference" section should be commented out with ;
    You should change those settings further down in the php.ini file.
    Example:
    error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
    display_errors = Off
    Last edited by adrianx (2013-07-26 12:32:02)

  • Dreamweaver CS6 and Coldfusion 9 - Syntax Errors & Code Coloring

    I recently purchased Dreamweaver CS6. 
    Also, I'm running Coldfusion 9 on Windows 7, but that's probably irrelevant.
    The issue is that Dreamweaver keeps on marking my files with syntax errors, and the code coloring gets all messed up.
    For instance, such function would indicate an error due to the #var#:
    <cfoutput><script>functionXYZ(#var#);<script><cfoutput>
    But this would work just fine:
    <script>functionXYZ(<cfoutput>#var#<cfoutput>);<script>
    The issue is that I have entire pages wrapped in cfoutput, redoing everything would take months.
    Or this would break the code coloring for the entire select as such:
    <select <cfif test eq 'test'>class="test"</cfif> name="selectbox">
    While this breaks the code coloring for the closing cfif as such:
    <select class="<cfif test eq 'test'>test</cfif>" name="selectbox">
    I'm getting syntax errors on thousands of my files, I understand that I could rewrite the code slightly to remove some of the error indications, but these are not actual errors so I feel that there is no point of me spending months updating the code.
    Is there a patch that I can apply so that this would work without any of these issues?
    Can someone please help?

    Have you posted this question in the Cold Fusion Forums?
    http://forums.adobe.com/community/coldfusion
    I don't use CF myself and the few CF coders I know have long since moved to Eclipse/ColdFusion Builder. 
    Nancy O.

  • 1093 Syntax error in Adobe devnet code?

    Hi All,
    I'm new to AC3 so maybe I'm mistaken... but I've tried to follow the steps in this Adobe AC3 tutorial: http://www.adobe.com/devnet/flash/articles/creating_animation_as3.html
    ..very closely and I'm getting a 1093 syntax error for the code below. Does anyone have an idea what the problem is..and what the fix would be?
    The line in red is the one that is indicated in the error message. (It's a tutorial about making a code snippet for tweening.)
    Thanks much!
    import fl.transitions.*;
    import fl.transitions.easing.*;
    * This Tween sample shows a fade-in effect
    * by default. Change the prop, to, from, and duration
    * values to change the animation. You can add code
    * in the event handler functions to respond to animation
    * event timing.
    function onTweenProgress(event:TweenEvent):void
        // do something as the tween progresses...
    function onTweenEnd(event:TweenEvent):void
       // do something when the tween ends...
    var prop:String = “alpha”;
    var from:Number = 0;
    var to:Number = 1;
    var duration:Number = 1;
    var tween:Tween = new Tween(rect_mc, alpha, Strong.easeOut, from, to, duration, true);
    tween.addEventListener(TweenEvent.MOTION_CHANGE, onTweenProgress);
    tween.addEventListener(TweenEvent.MOTION_FINISH, onTweenEnd);

    It's the double quotes that your code is using on that line.  I am guessing you copied and pasted from somewhere.  Try retyping the double quotes using your keyboard

  • Syntax Error in generated program.

    Hi Experts -
    I saw a similar thread regarding the issue I'm having but I thought I'd open another thread.
    0CMMT_ITEM_FMCI_PU_HIER Syntax Error for Generated Program
    I'm doing an extraction for 0CRM_ORGUNIT_HR01_HIER in RSA3 of CRM.
    I get an error message:
    Message RJ028 : Error 6 in function module RSS_PROGRAM_GENERATE
    There is a syntax error in the code.
    How do you solve this issue?
    We applied OSS note 822323 but still get the same error. The code still has the syntax error.
    Any one saw this or have any solutions? Please let me know. Thanks a lot in advance!

    Hi,
    Use the program RSA1HCAT in SE38 to check your hierarchy.
    Transaction RSA3 was not developed for checking hierarchy DataSources.
    Rather, it is only for transaction and attribute/text datasources.  If
    you want to check the extraction of hierarchy datasources in the R/3
    system, you should use the report RSA1HCAT.  In this report, enter the
    name of the hierarchy datasource in the "DataSource with HierarchyType"
    field.
    For this problem look at the note: 632920.
    Regards,
    Srikanth.

  • Syntax Error with creating object

    Hi,
    I am getting the following syntax error in the code below:
    non-staic variable this cannot be referenced from a static context
    job[ ] thread = new job(20);
    non-staic variable this cannot be referenced from a static context
    thread[index] = new job(index);
    public static void main (String[ ] args) {
    job[ ] thread = new job(20);
         for(int index=0; index < 20; index++) {
              input1[index]=index;
              input2[index]=index*2;
         for (int index=0; index < 20; index++) {
              thread[index] = new job(index);
              thread[index].start();
    Zulfi.

    Declare the nested class 'job' as static. Like "static class job" etc.

  • Syntax Error when using SQL Expression

    Morning all,
    When I try to type any SQL Expression within Crystal I am getting syntax errors, even when I type only SELECT {field name} FROM {table name}.
    Here is the query I did which gave me the following error:
    Query
    SELECT  order_progress . date_created
    FROM order_progress
    WHERE  order_progress . order_no = order_header . order_no
    AND  order_progress . order_status =77
    ORDER BY  order_progress . date_created DESC
    Error
    Error in compiliing SQL Expression
    Database connector Error: 'HY000[Informix] [Informix ODBC Driver]General Error. Syntax Error[Database Vendor Code-11060]'.
    Now this means, 1: I am getting a connection error with my db, for no apperent reason. 2: my syntax is not approved?!
    Can someone explain why is this happening and how to resolve this?
    many thanks
    Kind Regards
    Jehanzeb

    Morning Kyle,
    Thanks for the informative answer, I have found out the formula which counts number of days however, I am not sure what you meant by the following:
    >
    Kyle McAdam wrote:
    > create a formula that does the datediff....this will be a group.
    Done this, it counts the working days as in weekdays and takes bank holidays out as well
    here is the formula:
    WhileReadingRecords;
    //{order_progress.order_status}= 77;
    //{order_header.order_status}>=77;
    Local DateVar Start := {order_header.date_entered};   // Starting Date
    Local DateVar End := {order_header.act_despatch};  // Ending Date
    Local NumberVar Weeks;
    Local NumberVar Days;
    Local Numbervar Hol;
    DateVar Array Holidays;
    Weeks:= (Truncate (End - dayofWeek(End) + 1
    - (Start - dayofWeek(Start) + 1)) /7 ) * 5;
    Days := DayOfWeek(End) - DayOfWeek(Start) + 1 +
    (if DayOfWeek(Start) = 1 then -1 else 0)  +
    (if DayOfWeek(End) = 7 then -1 else 0);  
    Local NumberVar i;
    For i := 1 to Count (Holidays)
    do (if DayOfWeek ( Holidays<i>) in 2 to 6 and
      Holidays<i> in start to end then Hol:=Hol+1 );
    Weeks + Days - Hol;
    You will then have a formula field that is evaluated to 1, if the status is 77.
    you mean second formula? How I used,
    If Order_header.Order_Status=77 then
    1
    else
    2;
    however this doesn't seem to be working.
    > Now, sum that formula in each group footer. Suppress the detail lines...
    which formula to sum up?
    > **Don't use a cross tab with this solution. For a cross tab, you would have to calculate the totals in a different manner.
    so far I used Cross tab and it is showing the right days, however not showing the correct jobs per day.
    You might be right there that it calculates the totals differently, additionally how am I suppose to get the right Percentage if using the Cross tab. The percentage should be, count of number of jobs % Total jobs.
    hence:
    {#NumofJobs} % {#Total_Jobs}
    however, when I create this formula it does not let me add that into the cross tab.
    I also need to put a subreport in my report, can I use Crosstab to contain a link to my subreport?
    Many thanks
    Kind Regards
    Jehanzeb

  • Why syntax errors?

    when I copy/paste from:
    http://www.heaveninteractive.com/weblog/2008/03/01/actionscript-state-abbreviations-combo- box/
    the states list for a combobox, I get tons of syntax errors.
    The code looks good, is it some weird character-encoding thing?
    And does anybody have a URL for a working list of states that
    can go in a combobox?

    oops, you're correct. I have also on the stage a ScrollPane.
    I tried using a MovieClip as the source. The MC is on the stage and
    is named "square". When I set the source property of the ScrollPane
    to--> square
    that's what throws the error.
    I named the MC as square via the Properties tab.
    But the docs say that I can use "a reference to a display
    object" for the source property. What am I doing wrong there?
    Thanks for all your help so far.

Maybe you are looking for

  • Ehcache config in osb project

    Hi All, I'm working on osb 11.1.1.5 version.I have configured Ehcache 2.5.2 version and created java class in the eclipse environment.I created ehcache.xml file and placed it in my application class path,added all ehcache related jars.It is working f

  • Unix Executable Files Problem

    My husband moved from PC to Mac and had the Apple Store transfer his libraries to it - including picture files. Every time he opens iPhoto he is told that there are 14 files not yet imported. However, they can't be imported and on inspection turn out

  • I just finished installing 11.3 and now iTunes will not run.

    I just finished installing 11.3 and now iTunes will not run. I have uninstalled itunes and resinstalled several times. Now when I attempt to start iTunes i get the following two error dialogues:"The procedure entry point ADiAdID_AcquireMatchSlotIfNec

  • Design library (_catalogs) for Composed Looks is missing in the site

    Hi, Some of sites (subsites) in our O365 are missing design library in the _catalogs used for Composed Looks. How this library can be added after the fact, not sure what would be the reason for this library to be missing in the first place. Thanks Br

  • Unable to connect to the report server 9iAS

    I have a similar problem to the FRM-41213 when trying to initiate a      Report_Job_Id := RUN_REPORT_OBJECT(Report_Id, pl_id) through a form. I have tested everything on my LOCAL 9iDS environment which goes through a LOCAL report server (rwserver -in