Syntax error in Transfer routine
Hai all,
I am trying to write a routine for an object in the datasource trasnfer structure. I am getting a error. The code and the error as as follows.
DATA: l_s_errorlog TYPE rssm_s_errorlog_int.
SELECT SINGLE * FROM /BI0/PCOMP_CODE
WHERE COMP_CODE = TRAN_STRUCTURE-BUKRS AND
OBJVERS = 'A'.
IF SY-SUBRC = 0.
RESULT = /BI0/PCOMP_CODE-CHRT_ACCTS.
ENDIF.
returncode <> 0 means skip this record
RETURNCODE = 0.
abort <> 0 means skip whole data package !!!
ABORT = 0.
The error message I am getting is
"E:A target area must be declared either explicitly with an INTO clause or implicitly with a TABLES statement."
The cursor is going to the line " SELECT SINGLE *.....".
I guess its pointing where the mistake is. It says the target must be specified. But I already specified the target.
I appreciate any kind of help.
Thanks a lot.
Hi,
You didn't provide a INTO class for the select statement.
DATA : BEGIN OF LCL_COMPCODE.
DATA : INCLUDE STRUCTURE /BI0/PCOMP_CODE.
DATA : END OF LCL_COMPCODE.
SELECT SINGLE * FROM /BI0/PCOMP_CODE
WHERE COMP_CODE = TRAN_STRUCTURE-BUKRS AND
OBJVERS = 'A'
INTO LCL_COMPCODE.
Loop at the LCL_COMPCODE to retrieve the data.
Thank you
Arun
Similar Messages
-
Error while transporting Transformation: Syntax error in Start Routine
Hi Everyone,
I'm facing a strange problem during transporting one of the Business Content cubes from Dev. to Quality.
I'd activated the DSO 'Purchase Order Items (0PUR_O01)' and its entire data flow from the 4 datasources 2LIS_02_CGR, 2LIS_02_SCN, 2LIS_02_SGR, and 2LIS_02_ITM from BC. Then I migrated the Transfer/Update rules to transformations and the DataSources to BI7 DataSource. So far so good. The migration was successful and all the objects were activated.
Now when I transport the same to Quality, the import fails with return code 8 and the error message says:
'Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)'
'Start Routine: Syntax error in routine'
I verified that the transformation where the error orrured was the one from InfoSource Z2LIS_02_ITM to DSO 0PUR_O01. I went and checked the start routine and it did indeed have a syntax error:
'In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter SOURCE_PACKAGE" is incompatible with the formal parameter DATA_PACKAGE". '
But when I check in the Dev. system, there is no syntax error for the same routine. Later, I tried to transport only the said transformation by re-activating it in Dev, and again I got the same error.
I have no idea why I'm getting a syntax error in the start routine when there are non in the Dev. system. Also none of the coding is customised, it was only the BC code, migrated to a transformation.
Any suggestions on the steps I could take to transport the transformation to my quality system?
Thanks,
RamHi Ajay, Shanthi, svu and Ray
I do indeed have a start routine in my transformation and it was migrated from a 3.x update rule to a BI 7 transformation routine.
The migration was successful and the Start Routine has NO syntax errors in the start routine in the Dev. system. I only encounter the error while transporting it to the Quality system. I cannot modify the code in the Quality system because it is non-changelable and there is no point in trying to change the code in Dev. because there are no errors over there.
I've also made sure that I've transported all the necessary objects required by the transformations to quality. The routine does not perform a lookup, it simply deletes some records from the data package based on the processkey value (which is itself present in the data package). -
Syntax error in Start Routine routine 9998 in transformation
Hi Guyz,
I am getting the below error while doinf the syntax check in start routine in one of the transformation in BW production after the failed TR movement
E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
"SOURCE_PACKAGE" is incompatible with the formal parameter
"DATA_PACKAGE".
but for the same transformation in quality its showing no syntax errors found.
its an odd behaviour.
please guide with ur expertise.
cheerz,
raps.Hi,
Check the note 1052648. it says that:
Start routine:
In the start routine, all the fields from the source are always available.
During the migration, a type '_ty_t_SC_1_full' is generated in '2nd part global'. Since Note 1325124, this type has been adjusted when the field list is changed. In the past, a change to the field list caused syntax errors of the type:
For update rules:
E: For PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is not compatible with the formal parameter "DATA_PACKAGE".
For transfer rules:
E:For PERFORM or CALL FUNCTION "STARTROUTINE", the actual parameter "SOURCE_PACKAGE" is not compatible with the formal parameter "DATAPAK".
If this error continues to occur, go to the solution section to correct it.
Solution:
This error should now be automatically corrected with Note 1325124. Access the incorrect start routine in change mode. The type '_ty_s_SC_1_full' is then automatically adjusted to the source structure. If this does not work, you should use the tool 'RSTRAN_MIGRATION_CHECK' (described in Note 1369395) to check and possibly repair the transformation in question.
If this error still occurs, you can correct it manually as follows:
Copy the field list of the type '_ty_s_SC_1' from the 'private section' of the CLASS lcl_transform DEFINITION (you can find this when you scroll up in the routine editor of the start routine) to the type '_ty_s_SC_1_full' of '2nd part global'.
Regards,
Anil Kumar Sharma .P -
Syntax error in Transformation routine
Hi Folks,
We are In SP 17.
I have migrated standard 0bpartner_attr transfer rules to a transformation with syntax errors.
I have a routine for a gender, Valid From and Valid To its giving the following erorr.
E:Field "TRAN_STRUCTURE-VALID_FROM" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA"
statement.
the following is the routine code for Gender.
PROGRAM trans_routine.
CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
DATA:
p_check_master_data_exist
TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
Available information: Refer to methods of
interface 'if_rsbk_request_admintab_view'
p_r_request
TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
TYPE-POOLS: rsd, rstr.
Rule specific types
TYPES:
BEGIN OF tys_SC_1,
Field: XSEXM Male.
XSEXM TYPE C LENGTH 1,
Field: XSEXF Female.
XSEXF TYPE C LENGTH 1,
Field: XSEXU Unknown.
XSEXU TYPE C LENGTH 1,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1.
TYPES:
BEGIN OF tys_TG_1,
InfoObject: 0GENDER Gender.
GENDER TYPE /BI0/OIGENDER,
END OF tys_TG_1.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
METHODS
compute_0GENDER
IMPORTING
request type rsrequest
datapackid type rsdatapid
SOURCE_FIELDS type tys_SC_1
EXPORTING
RESULT type tys_TG_1-GENDER
monitor type rstr_ty_t_monitor
RAISING
cx_rsrout_abort
cx_rsrout_skip_record
cx_rsrout_skip_val.
METHODS
invert_0GENDER
IMPORTING
i_th_fields_outbound TYPE rstran_t_field_inv
i_r_selset_outbound TYPE REF TO cl_rsmds_set
i_is_main_selection TYPE rs_bool
i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
i_r_universe_inbound TYPE REF TO cl_rsmds_universe
CHANGING
c_th_fields_inbound TYPE rstran_t_field_inv
c_r_selset_inbound TYPE REF TO cl_rsmds_set
c_exact TYPE rs_bool.
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
$$ end of rule type
TYPES:
BEGIN OF tys_TG_1_full,
InfoObject: 0BPARTNER Business Partner.
BPARTNER TYPE /BI0/OIBPARTNER,
InfoObject: 0BP_ACTITL1 First Academic Title.
BP_ACTITL1 TYPE /BI0/OIBP_ACTITL1,
InfoObject: 0BP_ACTITL2 Second Academic Title.
BP_ACTITL2 TYPE /BI0/OIBP_ACTITL2,
InfoObject: 0BP_BTHNAME BP: Person's Name at Birth.
BP_BTHNAME TYPE /BI0/OIBP_BTHNAME,
InfoObject: 0BP_CAT Business Partner Category.
BP_CAT TYPE /BI0/OIBP_CAT,
InfoObject: 0BP_CONS Business Partner (Consolidated/Cleansing).
BP_CONS TYPE /BI0/OIBP_CONS,
InfoObject: 0BP_CONTACT BP: Contact Permission.
BP_CONTACT TYPE /BI0/OIBP_CONTACT,
InfoObject: 0BP_EXTERN BP Number in External System.
BP_EXTERN TYPE /BI0/OIBP_EXTERN,
InfoObject: 0BP_FSTNAME BP: Person's First Name.
BP_FSTNAME TYPE /BI0/OIBP_FSTNAME,
InfoObject: 0BP_GROUP Business Partner Grouping.
BP_GROUP TYPE /BI0/OIBP_GROUP,
InfoObject: 0BP_GRPNAM1 BP: Name 1 (Group).
BP_GRPNAM1 TYPE /BI0/OIBP_GRPNAM1,
InfoObject: 0BP_GRPNAM2 BP: Name 2 (Group).
BP_GRPNAM2 TYPE /BI0/OIBP_GRPNAM2,
InfoObject: 0BP_GRPTYPE BP: Group Type.
BP_GRPTYPE TYPE /BI0/OIBP_GRPTYPE,
InfoObject: 0BP_LSTNAME BP: Person's Surname.
BP_LSTNAME TYPE /BI0/OIBP_LSTNAME,
InfoObject: 0BP_MAR_STA BP: Marital Status.
BP_MAR_STA TYPE /BI0/OIBP_MAR_STA,
InfoObject: 0BP_MDLNAME BP: Person's Middle Name or Second First
*Name.
BP_MDLNAME TYPE /BI0/OIBP_MDLNAME,
InfoObject: 0BP_SECNAME BP: Person's Second Surname.
BP_SECNAME TYPE /BI0/OIBP_SECNAME,
InfoObject: 0CHANGEDBY Changed by.
CHANGEDBY TYPE /BI0/OICHANGEDBY,
InfoObject: 0CH_AT Time of Last Change.
CH_AT TYPE /BI0/OICH_AT,
InfoObject: 0CH_ON Last changed on.
CH_ON TYPE /BI0/OICH_ON,
InfoObject: 0CREATEDBY Name of person who created the object.
CREATEDBY TYPE /BI0/OICREATEDBY,
InfoObject: 0CREATEDON Date on which the record was created.
CREATEDON TYPE /BI0/OICREATEDON,
InfoObject: 0CREA_TIME Time Created.
CREA_TIME TYPE /BI0/OICREA_TIME,
InfoObject: 0GENDER Gender.
GENDER TYPE /BI0/OIGENDER,
InfoObject: 0LEGALFORM Legal Status of Organization.
LEGALFORM TYPE /BI0/OILEGALFORM,
InfoObject: 0NAME_ORG1 BP: Organization Name 1.
NAME_ORG1 TYPE /BI0/OINAME_ORG1,
InfoObject: 0NAME_ORG2 BP: Organization Name 2.
NAME_ORG2 TYPE /BI0/OINAME_ORG2,
InfoObject: 0NAME_ORG3 BP: Organization Name 3.
NAME_ORG3 TYPE /BI0/OINAME_ORG3,
InfoObject: 0NAME_ORG4 BP: Organization Name 4.
NAME_ORG4 TYPE /BI0/OINAME_ORG4,
InfoObject: 0NATION Nationality.
NATION TYPE /BI0/OINATION,
InfoObject: 0TITLE_SPPL Name Supplement, for example, Noble Title
TITLE_SPPL TYPE /BI0/OITITLE_SPPL,
InfoObject: 0BP_TYPE Partner:Partner Type.
BP_TYPE TYPE /BI0/OIBP_TYPE,
InfoObject: 0GN_PAR_SSY Source System of a Partner.
GN_PAR_SSY TYPE /BI0/OIGN_PAR_SSY,
InfoObject: 0LOGSYS Source System.
LOGSYS TYPE RSDLOGSYS,
InfoObject: 0RECORDMODE BW Delta Process: Record Mode.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0BP_GUID GUID of Business Partner.
BP_GUID TYPE /BI0/OIBP_GUID,
InfoObject: 0BPDATEFROM GP Attributes Valid from.
BPDATEFROM TYPE /BI0/OIBPDATEFROM,
InfoObject: 0BPDATETO GP Attributes Valid to.
BPDATETO TYPE /BI0/OIBPDATETO,
Field: RECORD Data record number.
RECORD TYPE RSARECORD,
END OF tys_TG_1_full.
Additional declaration for transfer rule interface
DATA:
g_t_errorlog TYPE rssm_t_errorlog_int,
RECORD_ALL LIKE SY-TABIX.
global definitions from transfer rules
DATA: gs_cob_pro TYPE rsd_s_cob_pro,
gt_viobj TYPE rsd_t_viobj,
gs_viobj TYPE rsd_s_viobj.
DATA: l_s_errorlog TYPE rssm_s_errorlog_int,
l_text TYPE string.
FORM compute_BPDATEFROM
CHANGING
RESULT TYPE tys_TG_1_full-BPDATEFROM
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
INCLUDE rs_bct_bupa_form_valid_from.
ENDFORM. "BPDATEFROM
FORM compute_BPDATETO
CHANGING
RESULT TYPE tys_TG_1_full-BPDATETO
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
INCLUDE rs_bct_bupa_form_valid_to.
ENDFORM. "BPDATETO
FORM compute_GENDER
CHANGING
RESULT TYPE tys_TG_1_full-GENDER
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
INCLUDE rs_bct_bupa_form_gender.
ENDFORM. "GENDER
FORM compute_GN_PAR_SSY
CHANGING
RESULT TYPE tys_TG_1_full-GN_PAR_SSY
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
INCLUDE rs_bct_bupa_form_gn_par_ssy.
ENDFORM. "GN_PAR_SSY
$$ end of 2nd part global - insert your code only before this line *
CLASS routine IMPLEMENTATION
CLASS lcl_transform IMPLEMENTATION.
METHOD compute_0GENDER.
IMPORTING
request type rsrequest
datapackid type rsdatapid
SOURCE_FIELDS-XSEXM TYPE C LENGTH 000001
SOURCE_FIELDS-XSEXF TYPE C LENGTH 000001
SOURCE_FIELDS-XSEXU TYPE C LENGTH 000001
EXPORTING
RESULT type tys_TG_1-GENDER
DATA:
MONITOR_REC TYPE rsmonitor.
*$*$ begin of routine - insert your code only below this line *-*
Data:
l_s_error_log type rssm_s_errorlog_int,
l_subrc type sy-tabix,
l_abort type sy-tabix,
ls_monitor TYPE rsmonitor,
ls_monitor_recno TYPE rsmonitors.
REFRESH:
monitor,
monitor_recno.
Migrated transfer rule call
Perform compute_GENDER
CHANGING
RESULT
l_subrc
l_abort.
*-- Convert Messages in Transformation format
LOOP AT G_T_ERRORLOG INTO l_s_error_log.
move-CORRESPONDING l_s_error_log to MONITOR_REC.
append monitor_rec to MONITOR.
ENDLOOP.
IF l_subrc <> 0.
RAISE EXCEPTION TYPE cx_rsrout_skip_val.
ENDIF.
IF l_abort <> 0.
RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
ENDIF.
$$ end of routine - insert your code only before this line -
ENDMETHOD. "compute_0GENDER
Method invert_0GENDER
This subroutine needs to be implemented only for direct access
(for better performance) and for the Report/Report Interface
(drill through).
The inverse routine should transform a projection and
a selection for the target to a projection and a selection
for the source, respectively.
If the implementation remains empty all fields are filled and
all values are selected.
METHOD invert_0GENDER.
$$ begin of inverse routine - insert your code only below this line-
... "insert your code here
$$ end of inverse routine - insert your code only before this line -
ENDMETHOD. "invert_0GENDER
ENDCLASS. "routine IMPLEMENTATION
let me know how to correct the above code.
thanksHi,
the field tran_structure is no more available. The name changed to source_fields. Additionally there is no datapak available. It is now source_fields_table. You might need to use field symbols to access the fields.
regards
Siggi -
Errors in Transfer Routine for 0MATERIAL_ATTR
I created a transfer routine on the 0Material_attr upload that needs to populate an attribute called Z_CPFX.
Problem is, I need to look at the material number, material group, and the Material Description, and then populate the result based on what I find.
I am new to using ABAP in these routines, so any help would be appreciated. I will award points.
The error I keep getting is E:Field "TRAN_STRUCTURE-MATNR" unknown.
Could somebody take a look at my ABAP and advise what I'm doing wrong?
Thank you.
Ken
$$ begin of routine - insert your code only below this line -
DATA: l_s_errorlog TYPE rssm_s_errorlog_int.
DATA: X_DESCRIPTION TYPE TABLE OF /BI0/TMATERIAL. " KC01
select *
into CORRESPONDING FIELDS of Table X_DESCRIPTION
from /BI0/TMATERIAL
where tran_structure-matnr = /BI0/TMATERIAL-matnr.
IF MATKL between 765 and 770.
RESULT = 'MAPOO'.
ELSEIF MATNR(1) = 'X'.
RESULT = 'MAPOO'.
ELSEIF MATNR(1) <> 'X'.
AND (MATKL = '750'
OR MATKL = '751'
or MATKL = '755'
RESULT = 'MAPWK'.
ELSEIF
(MATKL = '756'
or MATKL = '760'
or MATKL = '761'
and X_DESCRIPTION-TXTMD co 'renew'.
RESULT = 'MAPRK'.
ELSEIF
(MATKL = '756'
or MATKL = '760'
or MATKL = '761'
and X_DESCRIPTION-TXTMD !co 'renew'.
RESULT = 'MAPMM'.
ELSE.
RESULT = space.
ENDIF.
returncode <> 0 means skip this record
RETURNCODE = 0.
abort <> 0 means skip whole data package !!!
ABORT = 0.
$$ end of routine - insert your code only before this line -
ENDFORM.Hi Kenneth,
/BI0/TMATERIAL is the text table for 0material. If you are trying to get all the data from text table, please correct your select statement as below (text table does not contain the attributes. you might need to chenge the selection table to its attribute tables):
select *
into CORRESPONDING FIELDS of Table X_DESCRIPTION
from /BI0/TMATERIAL
where tran_structure-matnr = /BI0/TMATERIAL-MATERIAL.
I also see that some of your syntaxes are wrong:
eg: IF MATKL between 765 and 770. ==>
IF( ( MATKL > 765 ) and ( MATKL < 770 ) ).
Please look into the syntaxes of other statements as well. -
Dear All,
I have activated the infocube 0sd_c03 with grouping "in data flow before" and the infocube is activated with datasources
2LIS_11_VAITM
2LIS_11_VAHDR
2LIS_12_VCITM
2LIS_12_VCHDR
2LIS_13_VDITM
2LIS_13_VDHDR in 3.x where as
TRCS 2LIS_13_VDITM -> CUBE 0SD_C03 in transformation with DTP.
when I activate the transformation I get error as mentioned below:
Start Routine: Syntax error in routine and in the start routine when I check the details of the error is
E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
"SOURCE_PACKAGE" is incompatible with the formal parameter
"DATA_PACKAGE".
If source pakage is replaced by data package the system message is data_package is not available.
What do I do to resolve this issue.
KShi,
There is a structral diffrence between SOURCE_PACKAGE and DATA_PACKAGE
so you need to change tys_SC_1_full
go through the below links for similar problem
Re: 0IC_C03: 2LIS_03_BF Transformation Start Routine Activation error
Re: 2LIS_03_BF transformation problem -
Syntax error in Update Routine
Dear All,
While trying to update infoobject /BIC/ZGROSSPRI in an ODS in BI through an update routine, a syntax error is thrown when I am defining a variable of type tys_TG_1-/BIC/ZGROSSPRI.
For instance,
DATA: VALUE TYPE tys_TG_1-/BIC/ZGROSSPRI.
The error is :
E:Field "_ty_s_TG_1-/BIC/ZGROSSPRI" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement.
Below given is the code which I am using for the same. Kindly advise how to correct this error.
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
Edited by: Suneeth Sebastian on Apr 7, 2010 4:11 PM
Edited by: Rob Burbank on Apr 7, 2010 1:19 PMDear All,
While trying to update infoobject /BIC/ZGROSSPRI in an ODS in BI through an update routine, a syntax error is thrown when I am trying to define a variable of type tys_TG_1-/BIC/ZGROSSPRI. How is it possible to define a variable of type target field(Infoobject) ?
For instance,
DATA: VALUE TYPE tys_TG_1-/BIC/ZGROSSPRI.
The error is :
E:Field "_ty_s_TG_1-/BIC/ZGROSSPRI" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement.
tys_TG_1-/BIC/ZGROSSPRI is already defined in the Class section as below
TYPES:
BEGIN OF tys_TG_1,
InfoObject: ZGROSSPRI Gross Price in Statistical Currency.
/BIC/ZGROSSPRI TYPE /BIC/OIZGROSSPRI,
END OF tys_TG_1. -
Syntax error in Transfer strcutre activation
Friends,
Unable to activate SD Master Data DataSource
When we tried to activate master data datasource transfer structure we are facing following error,
Syntax error in GP_ERR_RSAPTM2, row 24 (-> long text)
Message no. RG102
Diagnosis
The type "WITH" is unknown.
please help us in this regard with your inputs
Thanks in advance,
SoujanyaHi Soujanya,
please check OSS note #755677. This is the only problem known to us in this area. If this does not succeed, please create a customer problem message.
Cheers
SAP NetWeaver BI Organisation -
Undue Syntax error in transformation routine
Hi,
A routine is reported to be incorrect (error RSTRAN 523) during the check of the transformation. However, a check on the source code in the editor returns no errors.
I've implemented the oss note 980548, but I still face the problem.
Do you have any idea of how to solve this issue ?
Thanks in advance !
DieuHi Dieu,
I had a problem related to a Transfer Roule for the selection of the same filed in Start Routine and single filed routine.
Check if you are obtaining two InfoObjects from the same field and check the corresponding routines.
Ciao.
Riccardo. -
Syntax error during transport on valid transfer routines
Dear All,
We have some routines in a tranfer structure that are valid and working just fine in DEV. But when we transport them to QA we get the following error message :-
Start of the after-import method for object type R3TR ISTS (Activation Mode)
Transfer structure 6DB_V_BW_EPISODE_AD activated under the name 6DB_V_BW_EPISODE_AD
It is not necessary to copy dependent objects for transfer structure 6DB_V_BW_EPISODE_AD
Syntax error in transfer routine for InfoObject OPEN_DAT
Activating Transfer Rules 6DB_V_BW_EPISODE_AD ...
47 Transfer Rule(s) of the transfer structure 6DB_V_BW_EPISODE_AD removed from control table
53 InfoObject(s) of the transfer structure 6DB_V_BW_EPISODE_AD removed from control table
Formulas have been saved
Syntax error in transfer routine for InfoObject OPEN_DAT
If we remove all the routines the activation works just fine even though our routines are valid and working just fine in DEV.
Can anyone explain this as this is becoming quite urgent now ?
Thanks in advance.
CraigHi Oliver
I work with Craig. In response to your question, what he means is that all objects independantly have been transported ok, apart from the transfer rules. If you look at the table RSTSRULES you will see a column called CONVROUT_L.
In our Dev system this field contains the BW generated rule code. Eg.
45GEGC5I66GA9Z5G4KFDDRIK4 against the Transfer structure. When the after import process runs, it uses the contents of this table together with the contents of the RSAABAP table which contains the code and creates the transfer rule program.
In RSAABAP we have the following code for CODEID '45GEGC5I66GA9Z5G4KFDDRIK4'
DATA: l_s_errorlog TYPE rssm_s_errorlog_int.
CHECK NOT &TS&-opened_date IS INITIAL.
IF &TS&-opened_date < '19000101'.
&RS& = '19900101'.
ELSEIF &TS&-opened_date > '29990101'.
&RS& = '19900101'.
ELSE.
&RS& = &TS&-opened_date.
ENDIF.
returncode <> 0 means skip this record
&RE& = 0.
abort <> 0 means skip whole data package !!!
&AB& = 0.
In our QA system the column is blank because of the wierd Syntax problem when generating the program, therefore the transfer rules dont get activated.
As you can see there is no problem with the ABAP.
Regards
Mark -
Syntax error while executing Key Figure routine
Hello,
I am posting my question again, as I have not got any solution. Please help it will be really appreciated. Here's the description
I am loading data from flatfile to an Infocube with 3 keyfigures: Sales Price , Sales Quantity, Sales Revune. Getting values for Sales Price and Salea Quantity from flatfile and calculating for Sales Revunue IO_VB_REV using routine
- I created Transformations, and under Rule Group: Standard Group box I have not mapped IO_VB_REV any datasource field and see 'X' sign against the field.
- In rules detail screen, I add two source fields of Rule , IO_VB_QU and IO_VB_PRC. I see IO_VB_REV already added under 'Target fields of Rule' section
- I then add the only following line to routine
RESULT = SOURCE_FIELDS_RULE-/BIC/IO_VB_QU * SOURCE_FIELDS_RULE-/BIC/IO_VB_PRC .
- Clicking on check button it gives no syntax error message. I save and exit back to Rule Details page.
- For IO_VB_REV field If I select any of 2 options i.e. Fixed Unit or No conversion it gives me a dump. So I select 'from conversion' option. In that case I enter USD against 'Conversion Type' field. It gives me information box popup with 'Incorrect Input Message'
- When check button hit on 'Rule Details' page, it gives me error message ' Syntax error in routine '
Why is it giving me syntax error, inspite of the fact that I get 'no syntax error' message on routine page. Also why am I getting short dumps on changing Conversion TypeHi Olivier,
I really thank you for ur efforts in helping me solving this problem. Below is complete description of KF defined,
1. Created InfoObjects for Sales Quantity, Sales Price, Sales Revunue
Definition of <b>Sales Quantity</b>
Name: IO_VB_QU
Type/Data Type : Quantity
Data Type: QUAN - Quantity field, points to unit field with format UN
Currency / unit of measure
Unit / Currency: 0UNIT
Definition of <b>Sales Price</b>
Name: IO_VB_PRC
Type/Data Type : Amount
Data Type: CURR - Currency field, stored as DEC
Currency / unit of measure
Fixed Currency: USD
Definition of <b>Sales Revunue</b>
Name: IO_VB_REV
Type/Data Type : Amount
Data Type: CURR - Currency field, stored as DEC
Currency / unit of measure
Fixed Currency: USD
2. As the data is being read from flatfile, created DataSource with fields for Sales ID, Sales Price, Sales Quantity. As I am reading unit for quantity from file (has values EA,BOX,CSE), I have a corresponding field UNIT in DataSource. No field for Sales Revunue.
3. I use 'Create Transformation' functionality to automatically create transformations.
4. Rule Details page of each of 3 KFs has following values
<b>Rule Details page of Sales Quantity</b>
Rule Type: Direct Assignment
Aggregation : Summation
Target Unit: 0UNIT
Unit: from Source
Source Unit: UNIT
Source Fields of Rule: /BIC/IO_VB_QU, UNIT
Target Fields of Rule: 0UNIT, IO_VB_QU
<b>Rule Details page of Sales Price</b>
Rule Type: Direct Assignment
Aggregation : Maximum
Fixed Target Currency : USD
Currency: No Conversion
Source Fields of Rule: /BIC/IO_VB_PRC
Target Fields of Rule: IO_VB_PRC
<b>Rule Details page of Sales Revunue</b>
Rule Type: Routine
Aggregation : Summation
Fixed Target Currency : USD
Currency: from Conversion
Conversion Type: ??????.....(I entered USD it gives me Incorrect Input message)
Source Fields of Rule: /BIC/IO_VB_PRC, /BIC/IO_VB_QU, UNIT
Target Fields of Rule: IO_VB_REV
I have this line is the routine
RESULT = SOURCE_FIELDS_RULE-/BIC/IO_VB_QU * SOURCE_FIELDS_RULE-/BIC/IO_VB_PRC.
Let me know if u need any other info......
I really appreciate u trying to help me
Vidya -
ABAP SYNTAX ERROR IN STANDARD SAP TRANSFORMATION
Hi experts, I am facing a problem while activating a transformation for the cube 0CCA_C11. I installed the flow in 3.5 and wen i was migrating the flow, i first migrated the update rule. At that time, the transformation is giving me " syntax error in the routine" for the infoobject 0CO_REPLINE. The eroor message is given below:
E:The type "_TY_S_SC_1_FULL" is unknown, but there is a type with the similar name "_TY_S_TG_1_FULL". "_TY_S_TG_1_FULL".Hi,
Please check routine if any for 0CO_REPLINE and also expert routine.
Regards,
Rema. -
0LOGSYS transfer routine error transporting DEV- QA
Hello!
I need to transport several business content infocubes and loading flow(migrated from 3x to in 7.0) from DEV to QA.
In QA I've imported also infoobject 0LOGSYS and his transfer routine. But it appears iinactive. When I display the transfer routine from characteristic 0LOGSYS, is missing this part of code::
IF RESULT IS INITIAL and
IOBJ_NAME = '0LOGSYS'.
fill source system
RESULT = SOURCE_SYSTEM.
What can I do ? In DEV, the code is ok. Can I modify it manually ? Other what must I do in DEV to repair it?
Thanks a lot !I need to activate the object 0LOGSYS from Business Content again ? or manually with change and also change and save the routine?
In STMS I have:
Start of the after-import method RS_IOBJ AFTERIMPORT for object type IOBJ
Syntax error Incorrect statement :Expression missing . in row 20 position 0
Characteristic 0LOGSYS: Error when activating or checking the transfer routine
This infoobject, 0LOGSYS is also attribute for others infoobjects and I have also errors like:
Attribute 0LOGSYS from characteristic 0BUS_AREA is not actively available.
I've imported also a data source 3x migrated to 7.0 with the transformation and an infocube, and I have error:
Start of the after-import method RS_RSDS AFTERIIMPORT for object type RSDS
Soource system DEV does not exist
Start of the after-import method RS_TRFN_AFTER_IMPORT fot object type TRFN
No rule exists.
Source RSDS mysource DEV does not exist
AND SUMMARy:
Object IOBJ 0logsys imported with errors
Thanks! -
Start Routine: Syntax error in routine 2LIS_03_BF Transformations
Hi experts,
I enhanced the 2lis_03_bf data source, and replicated the data source in bw system, i have mapped the transformations and when i try to activate the transformations it is giving the below error.
Start Routine: Syntax error in routine
when i check the start routine it is giving the below error message.
E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
"SOURCE_PACKAGE" is incompatible with the formal parameter
"DATA_PACKAGE".
please provide me the solution.
Regards
venuscmHi Venu,
This seems to me like you have earlier migrated the update rules to transformations. We did the same earlier and faced issues whenever we add new fields/infoobjects. The error message was different, if i remember correctly.
We had to add the new field/infoobject added, to the structure '_ty_s_*****' that exists at the top of the start routine code. This was one disadvantage of migration of rules. -
Hi Gurus,
I have added new fields in ODS and Cube.While activating transformation I am getting the following error : 'Start routine:Syntax error in routine'Please let me know how to trouble shoot the same.
Regards
HasiniHi Pallavi,
Pls gothroug the Routine:
MONITOR_RECNO.
Runtime attributs
SOURCE_SYSTEM = p_r_request->get_logsys( ).
Migrated update rule call
Perform routine_9998
TABLES
SOURCE_PACKAGE
CHANGING
l_abort.
*-- Convert Messages in Transformation format
LOOP AT MONITOR_RECNO INTO ls_monitor_recno.
move-CORRESPONDING ls_monitor_recno to MONITOR_REC.
append monitor_rec to MONITOR.
ENDLOOP.
LOOP AT MONITOR INTO ls_monitor.
move-CORRESPONDING ls_monitor to MONITOR_REC.
append monitor_rec to MONITOR.
ENDLOOP.
IF l_abort <> 0.
RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
ENDIF.
$$ end of routine - insert your code only before this line -
ENDMETHOD. "start_routine
Method inverse_start_routine
E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
SOURCE_PACKAGE" is incompatible with the formal parameter
"DATA_PACKAGE".
Regards
Hasini
Maybe you are looking for
-
Mail - Forwarding attachments manually and with rules - how do I keep my attachments?
I have the latest updates of Lion on by MacBookPro (late 2010 model). I use mail to receive mail from my business account (Exchange account) and my personal account (IMAP account). Up until this summer, everything was working peachy with the system.
-
How do I create a song in key of Ab Minor
Is it possible to create a song in garageband in Aflat minor? If so, how? Thanks Kate
-
So in the most basic (first exercise) jsp, it works fine, but; if I open another instance of IE and then return to the �localhost�page (*.jsp) clicking the submit button causes the page to refresh to default values. It also takes 10-15 seconds for th
-
Should Fuse for OS X be on my new Retina iMac?
After migrating files, folders, setting and apps from my old 2009 iMac (currently running OS X 10.10 Yosemite) to my new Retina iMac (27", Retina 5K, OS X Yosemite) I notice that there is a Fuse for OS X (Oxyfuse) preference pane in the System Prefer
-
Hi guys, I'm trying to print a tiff format image, I can print gif formats, but if the image is tiff, it doesnt print, on my researchs I saw that is not so simple as I'd like it to be, so if anyone here has done it before, print tiff images, pls send