Syntax error: Invalid CSS after "" (iphone.sass) [Wikipedia]

Using the newest build (iOS 4.2.1) I am getting the above error for all wikipedia pages on my phone only. Can anyone confirm this?

I too am having this problem in my iPhone. The problem seems to be localized to mobile safari as iCab Mobile has no problems displaying the mobile wiki page properly.

Similar Messages

HPLIP: "Syntax error: invalid syntax" installing HP LaserJet 1018

I'm trying to install my HP LaserJet 1018 on my new laptop with fresh arch installation. I have installed Cups and hplip, and now run hp-setup to install the proprietary plugin from HP that will load the firmware to the printer. However, I get an error running hp-setup and so the plugin cannot be installed.
* my printer is plugged in and turned on. In the system log, I can see something is recognized
* I run "hp-setup -i" as root
* Specify that the printer is installed on USB, then proceed to download the plugin. This succeeds
* Then it tries to install the plugin, and that is where it fails, with this message:
| INSTALLING PLUG-IN |
Verifying archive integrity... All good.
Uncompressing HPLIP 3.10.9 Plugin Self Extracting Archive.........................................
File "./plugin_install.py", line 78
except ImportError, e:
^
SyntaxError: invalid syntax
error: Python gobject/dbus may be not installed
(I don't really know how to do proper formatting on this forum, but the ^ indicating where the error is is on the comma , after ImportError)
Does anyone know what is going wrong? It seems to me that there is an error in the plugin_install.py-file which then makes the installer believe that the pygobject and dbus-python are not installed, but they both are. Also, "hp-check -t" shows that all dependencies are there. Can anyone help me?

Delete the /usr/bin/python file which is just a link to /usr/bin/python3
Change to /usr/bin folder
Create a new link, this time pointing to python 2.7
The commands
rm -rf /usr/bin/python
cd /usr/bin
ln -s /usr/bin/python2.7 python

Error "Compile error: Invalid character" after copy paste operations in VBE 6.5 PowerPoint 2011

This is a weird problem with the VBE 6.5 in Office 2011, running natively on a Mac.
Sometimes, yet often, when I select a word by double clicking on it or a line by highlighting that line in the editor and then copy/paste it somewhere else in the code, the compiler throws the error "Compile error: Invalid character"
The thing is, what I see has been pasted is exactly the same as the source text. However, if I then paste the same clipboard item to a text editor, I can see that there is an 'invisible' character at the end of the string which is counted in the text editor
where the cursor is shifted past it but does not shown on the screen!!!
Back in the VBE, if I select a line that is dubious and drag it, the semi transparent dragged text has a '>' character on a new line.
In some copy/paste cases, the compiler doesn't see an error but the code doesn't work as expected and I have spent hours debugging stuff that has invisible characters in it (the hardest debugging I've ever had to do!).
I'm not sure if this example will paste correctly into the forum but this looks like 19 characters but is in fact 20 as there is the offending copy/paste invisible character between 'Test' and '.'
<code>Test.Value = False</code>
This seems to be a major oversight in the code of the VBE 6.5 so are Microsoft aware of this and when is it due to be fixed?
Jamie.

I had this exact issue. This is a terrible bug. The code looks perfect, but there are hidden characters that throw compiler errors. Thanks for the quick fix, Microsoft.

ACL-list syntax error in PIX after upgrade, need urgent help!

Hello everyone
We have a setup including Cisco ACS + a VPN 3005 Concentrator and a PIX 515E (7.2.4)
We upgraded the PIX version from 7.0 to 7.2.4 and suddenly our downloadable access-list was getting refused when users authenticated against the ACS.
When debuging radius in the PIX we found that entering this line in the downloadable access-list give error and stop the users of getting the ACL.
"deny ip any 192.168.0.0 0.0.255.255"
PIX refused to process their auth request when encountering this line.
Fine we said, we changed the ACL syntax to this : deny ip any 192.168.0.0 255.255.0.0
This made the PIX process the ACL.
We were happy for awhile until VPN users started to complain.
It seems that the VPN 3005 cant deal with the syntax we entered in the PIX!
The VPN 3005 doesnt seem to be able to handle the acl line "deny ip any 192.168.0.0 255.255.0.0" !
It can only handle "deny ip any 192.168.0.0 0.0.255.255" !
Which the PIX cant handle..
I'm a loss at what to do here..
We got VPN users who cant surf now with these ACL problems.
What can I do? Anyone else encountered this?
We upgraded the VPN 3005 to the lastest SW version
Really need some help here guys!
Thanks

I don't think Cisco ever changed anything on the PIX. It uses subnet masks from day one AFAIK and VPN Conc uses wildcard masks like IOS. You can use the acl-netmask-convert command on the ASA to fix this issue. This way you define a willdcard ACL on the ACS/AAA server and then use this command on the ASA to use the same downloadable ACL for both devices (PIX,VPNC).
http://www.cisco.com/en/US/docs/security/asa/asa81/command/ref/a2.html#wp1622944
Please Rate if helpful.
Regards
Farrukh

Syntax error: Missing operand after 'Number' operator

If Serial_NumberTextBox.Text = "" Then
Exit Sub
Else
Dim cantfind As String = Serial_NumberTextBox.Text
TravelINFOBindingSource.Filter = "(Convert(Serial Number, 'System.String') LIKE '" & Serial_NumberTextBox.Text & "')"
If TravelINFOBindingSource.Count <> 0 Then
With Form5.DataGridView1
.DataSource = TravelINFOBindingSource
End With
Else
TextBox1.Text = "Ticket is either expired or not avaliable!"
TextBox1.ForeColor = Color.Red
Serial_NumberTextBox.Text = ""
Serial_NumberTextBox.Select()
Serial_NumberTextBox.SelectAll()
End If
End If
where is the error !!! help me plz

Hello,
Like syntax for this is the same as SQL Like, see
the following documentation and note the percent symbol. Also remove the ( and ) in the string.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Syntax error in SAPLCRM_CONDITION_COM_OW after upgrade 7 - 7 with EhP1

Dears,
after upgrade I cannot go into edit mode for activities, sales orders. I get a short dump.
I think it may be connected to FM CRM_ORDER_GET_ACTIVE_OW which returns nothing , so variable for
lv_no_pricing is not set to X. Then when system tries to check pricing it throws error in LCRM_CONDITION_COM_OWF02, that 'CS_ACS_I_COM' does not have a component 'BASIC_TIER.
Can you help?
the same I get when opening document in sap gui and web ui.
It maybe some additional configuration loaded in upgrade.
Best Regards
Radek

Hi,
These structures are usually generated. Please go to transaction
/SAPCND/CTFC, for Application CRM regenerate all fields again.
Go regenerate the field catalog to the following IMG menu;
Customer Relationship Management
-> Basic Functions
   -> Pricing
     -> Define Settings for Pricing
       -> Maintain Field Catalog
Goto menu Field Catalog -> Generate.
Regards,
Aidan

FindServerBehaviors in DynAttribute.htm ... Syntax error Invalid quantifier ??

I get this error: While executing findServerBehaviors in
DynAttribute.htm the following JavaScript errors occured:
SyntaxError { Invalid quantifier
I get this sort of thing from time to time when I handwrite
php / mysql code and DW8 can't digest it for some reason. My files
always work fine on the server, but DW8 (and MX, MX2004) seem to
get confused by things that don't fit in its idea of how recordsets
and queries work.
I have NO EXTENSIONS installed, and have already reinstalled
this once in the past to no avail.
It's just annoying, as I can hand code fine and just click
"OK" about the error, but it happens every time DW changes from
codeview to design view, or upon opening the doc, or saving it.
Any ideas?
BTW, I really wish Adobe / MM would give us a way to disable
these warnings (i.e., "do not show this message again...) for a
given file. Maybe it could be in the file notes? Are you listening,
Adobe? Probably not...

Try this:
Troubleshooting JavaScript errors in Dreamweaver
http://www.adobe.com/go/tn_19105
David Alcala
Adobe Product Support

Syntax error when adding variables in recordset (query)

MySql,PHP,Dreamweaver,WindowsVista
Hi I am receiving a syntax error: invalid quantifier ++ $orderNum;s*?> when adding two variables in the recordset (query) dialog box. I get the error when clicking OK.
Here is what is entered:
name: fieldname
type: text
default: -1
runtime value: $_GET['Field']
name: searchvalue
type:text
default: -1
runtime value: $_GET['Search']
Can anyone help with this?

That's a completely separate issue. The error message is telling you that you have not defined the testing server correctly in the Site Definition dialog box.
The Host directory field and URL prefix should both point to the same place, in other words, the root of your website. Host directory is the physical path, while URL prefix is the address you would put in a browser address bar.
Select Site > Manage Sites. Select the name of the site, and click the Edit button. In the Site Definition dialog box, select the Advanced tab, and then choose Testing server from the Category list on the left.
Depending on how your remote login works, Host directory should probably be public_html or just /. Use the same value as in the Remote server part of the Site Definition dialog box. The URL prefix should be http://gaylehansen.aisites.com/.

Content generation error. [Error: invalid asset]

I'm am trying to add an article to a Folio and am getting "Content generation error. [Error: invalid asset]. I have re-imported all of the files in the article. I'm stumped. Anyone have any ideas?

Hm. Might be that the two errors are of a different kind:
[Error: Invalid asset] vs. [Error: Invalid asset location].
I have an error with a simple image I want to use with "Pan and Zoom" ("Schwenken und Zoomen" in my German InDesign CS5.5 v7.5.2 on OSX 10.6.8).
The error message translates to "[Error: Invalid asset]":
After a bit of experimenting I think I know why there was an error.
My first attempt was on an TIFF image (=> ERROR), then I tried with a JPEG version (NO error).
Too bad Overlay Creator cannot detect wrong file formats for the given task.
Uwe

B2b Invalid syntax error

hi all
In Application Configurations-> Customer -> b2b_sta i set as default configuration and active configuration
then i create JCO
client:000
lang: en
group:PUBLIC
r3name:* XXX*
mshost: *host name *
user: *User name *
passwd:
After that i restart server i am getting this error Invalid syntax error
hostname:${https.port.core.isa.sap.com}
please any body help me here

Hi Apprentice,
From your description I assume that you are using "group_connect" JCO connection and it is used for SAP system with Message Server (Load balancing)
I believe that you have selected right JCO connection type as per your environment.
About your error hostname:${https.port.core.isa.sap.com} you can find solution in XCM.
Go to General Application Setting --> Customer --> b2b --> b2bconfig on right side look for "SSLEnabled" parameter. Now click on "Edit" button on top right to edit XCM configuration. Change value to "False" for "SSLEnabled" parameter. Now click on "Save Configuration" and restart your application.
You will not get the error which you are getting right now.
Your "SSLEnabled" parameter has "True" value right now and this is the main reason for your current error change it to "False" it solve your error.
Cheers.
eCommerce Developer

After upgrading to Yosemite, Thunderbird does not recognize email addresses: "syntax error" in recipient address. Fix?

After upgrading to IOS Yosemite, Thunderbird will no longer send emails to the contacts in my history file that drops down when I "write" a new message. I continue to get a return response that there is a syntax error in the address field of the message although I have tried both my stored emails and manually typed email addresses. What has been changed and how do I recover the use of Thunderbird's great program?
By the way, how do I eliminate out of date email addresses from popping up and populating email responses rather than the most current ones that are in my contacts? I now have to type each one in separately as the default options that come up are many out of date.
Thanks much for your great work. Mozilla and Firefox are the best.

Did you find a solution to this issue? My mail server is doing the same thing. I've tried six migrations now, and have a couple of tickets open, but they all have issues. I have worked around all of them except the mail server problem.
I did some more digging; the problem appears to be that on a migrated server, it leaves all of your mail store in the old location, doesn't move it, and then doesn't appear to upgrade spam-assassin properly. The net effect is that the mail server gets the SMTP communication, tries to pass the message into spam assassin, and then it goes south.
I see errors like this littered in the logs:
Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed:
Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed: No such file or directory
Do you see anything similar?

Syntax Error while running step 34 (35) after unicode conversion

Hello,
We are converting our test system to Unicode to find out how to do it
in our production system. We are at step 34/35 (Starting RFC job's) in
the database installation so we are almost done but we have encounted a
problem that we can't find a solution to. The error log in Sapinst give this
information:
ERROR      2008-11-09 11:19:19 [iaxxrfcimp.cpp:1103]           CAbRfcImpl::performFunctionCall FRF-00025 Unable to call function.
Error message: ?`>?/?????????>??????/_???&<?(????????????????????????????????????????????????? .
At the same time we can read the following text in dev_w1 (and dev_w0 and so on):
A *** ERROR => Syntax error in program SAPLBTCH                                 [abgen.c      1388]
A *** ERROR => > Include LBTCHF39                                 line 173 [abgen.c      1390]
A *** ERROR => > Statement "âu2018âu2018âu2018âu2018âu2018IF" is not defined. Check your spelling. spelling. [abgen.c      1393]
The error don't always look the same, here is another example:
A *** ERROR => Syntax error in program SAPLSALC                                 [abgen.c      1388]
A *** ERROR => > Include LSALCU54                                 line 55 [abgen.c      1390]
A *** ERROR => > No component exists with the name "MTSYSIDâu2018MTMCNAMEâu2018MTNUMRANGEâu2018MTUIDâu2018". "MTSYSID [abgen.c      1393]
A *** ERROR => > âu2018MTMCNAMEâu2018MTNUMRANGEâu2018MTUIDâu2018". [abgen.c 1395]
The common thing is Syntax error. If we try to log in to the system using SAP Gui we get this message: "Syntax error in program SAPMS380".
In the file dev_disp we can read a lot of these:
Tue Nov 11 14:06:32 2008
*** WARNING => DpRqServiceQueue: timeout of HIGH PRIO msg, return DP_CANT_HANDLE_REQ
But we should have enough WP since noone has loggen on to the system.
Facts:
Tue Nov 11 14:06:07 2008
kernel runs with dp version 138000(ext=102000) (@(#) DPLIB-INT-VERSION-138000-UC)
length of sys_adm_ext is 524 bytes
sysno      60
sid        S01
systemid   274 (HP (IA-64) with HP-UX)
relno      6400
patchlevel 0
patchno    258
intno      20020600
make:      single threaded, Unicode, 64 bit
pid        20538
HPUX on Intel IA64 with Oracle 10.0.2.0.2
SAP ERP Central Component 5.0
SAP_ABA     640     0021     SAPKA64021
SAP_BASIS640     0021     SAPKB64021
Please let me know that there is some small setting that I can change to regenerate the programs or something like that...
Br Linus Hellsing

Hello Ralph
Here they are:
TOC files
SAPAPPL0.TOC:
vn: R6.40/V1.4
id: 084ac0df0000003d
cp: 4102
data_with_checksum
tab: [HEADER]
fil: SAPAPPL0.001 1024
SAPAPPL1.TOC:
vn: R6.40/V1.4
id: 084ac0df0000003d
cp: 4102
data_with_checksum
tab: [HEADER]
fil: SAPAPPL1.001 1024
EXPORT log:
SAPAPPL0.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110702
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -ctf E /mnt/s01_exp_uni/DATA/SAPAPPL0.STR /mnt/s01_exp_uni/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081029110703
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110709
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -datacodepage 4102 -e /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: init SUMG interface; package name: "SAPAPPL0".
(RSCP) INFO: "/mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml" created.
(RSCP) INFO: environemnt variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 9491
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(GSI) INFO: dbname   = "S0120081016081020                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(GSI) INFO: instno   = "1220008646"
(EXP) TABLE: "/BDL/LOCK"
(EXP) TABLE: "/BEV1/BO_CONT"
(EXP) TABLE: "/BEV1/BO_ENQUEUE"
(EXP) TABLE: "/BEV1/CLCONT1"
(EXP) TABLE: "/BEV1/CLDEB"
and so on
(EXP) TABLE: "ADR9S2"
(CNV) WARNING: code page conversion problem
               Number of substitutions: 4
      (row 30 of current buffer, table ADRC)
CLIENT 30 30 30                                        |000             |
ADDRNUMBER 30 30 30 30 30 31 34 38 36 39                   |0000014869      |
DATE_FROM 30 30 30 31 30 31 30 31                         |00010101        |
NATION 20                                              |                |
(CNV) WARNING: code page conversion problem
               Number of substitutions: 2
      (row 41 of current buffer, table ADRC)
CLIENT 30 30 30                                        |000             |
ADDRNUMBER 30 30 30 30 30 32 31 39 38 32                   |0000021982      |
DATE_FROM 30 30 30 31 30 31 30 31                         |00010101        |
NATION 20                                              |                |
(RSCP) INFO: 51 lines written to /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml
(EXP) TABLE: "ADRC"
(RSCP) INFO: 3 lines written to /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL0001.xml
(EXP) TABLE: "ADRCOMC"
and then its the same with table SETHEADERT and SKAT and SNAP and STXH.
I will not include the whole file as it is 14213 lines long.
SAPAPPL1.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110701
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -ctf E /mnt/s01_exp_uni/DATA/SAPAPPL1.STR /mnt/s01_exp_uni/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081029110702
/sapmnt/S01/exe/R3load: START OF LOG: 20081029110709
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4
Compiled Aug 16 2008 18:01:48
/sapmnt/S01/exe/R3load -datacodepage 4102 -e /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: init SUMG interface; package name: "SAPAPPL1".
(RSCP) INFO: "/mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/EXPORT/ABAP/COPY/NUC/DBEXP/SAPAPPL1001.xml" created.
(RSCP) INFO: environemnt variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 9491
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(GSI) INFO: dbname   = "S0120081016081020                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(GSI) INFO: instno   = "1220008646"
(EXP) TABLE: "/BDL/ADDONKEYS"
(EXP) TABLE: "/BDL/BADHOST"
and so on until
(EXP) TABLE: "SEWADATCOL"
(EXP) TABLE: "SFHX"
(CNV) WARNING: code page conversion problem
               Number of substitutions: 1
      (row 3519 of current buffer, table SFIWP)
LANGU 4a                                              |J               |
WORDF 82 41 45 82 a8 82 ad 95 4b 97 56 82 aa 82 a0 82 |.AE.¨..K.V.ª. .|
WORDF c8 82 55 45 82 b7 81 42 20 20 20 20 20 20 20 20 |È.UE.·.B        |
WORDF 20 20 20 20 20 20 20 20                         |                |
and table STERM_TEXT. As before I will not include it all, the log file is 7775 lines long.
IMPORT log
SAPAPPL0.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081106102704
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -ctf I /mnt/s01_exp_uni/DATA/SAPAPPL0.STR /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106102705
/sapmnt/S01/exe/R3load: START OF LOG: 20081106103529
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "S0120081106091135                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: /BDL/LOCK created #20081106103642
(IMP) INFO: import of /BDL/LOCK completed (0 rows) #20081106103642
(DB) INFO: /BDL/LOCK~0 created #20081106103642
(DB) INFO: /BEV1/BO_CONT created #20081106103642
and so on until the end:
(DB) INFO: ZWF_STATUSCHANGE created #20081106173307
(IMP) INFO: import of ZWF_STATUSCHANGE completed (0 rows) #20081106173307
(DB) INFO: ZWF_STATUSCHANGE~0 created #20081106173307
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106173307
/sapmnt/S01/exe/R3load: START OF LOG: 20081107092517
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "S0120081106091135                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107092541
/sapmnt/S01/exe/R3load: START OF LOG: 20081107111014
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL0.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "S0120081106091135                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107111041
The log file is 81163 lines long.
SAPAPPL1.log
/sapmnt/S01/exe/R3load: START OF LOG: 20081106102702
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -ctf I /mnt/s01_exp_uni/DATA/SAPAPPL1.STR /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/DDLORA.TPL /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.TSK ORA -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.log
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081106102703
/sapmnt/S01/exe/R3load: START OF LOG: 20081106103529
/sapmnt/S01/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#27 $ SAP
/sapmnt/S01/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 16 2008 18:23:56
/sapmnt/S01/exe/R3load -dbcodepage 4102 -i /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.cmd -l /mnt/s01_exp_uni/tmp/sapinst_instdir/ECC50/COPY/IMPORT/SYSTEM/ABAP/ORA/UC/DB/SAPAPPL1.log -stop_on_error -k 54FB9C39DB
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "S0120081106091135                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "scar                                                            "
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "scar"
(GSI) INFO: release = "B.11.23"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "ia64"
(DB) INFO: /BDL/ADDONKEYS created #20081106103603
(IMP) INFO: import of /BDL/ADDONKEYS completed (0 rows) #20081106103603
(DB) INFO: /BDL/ADDONKEYS~0 created #20081106103603
(DB) INFO: /BDL/BADHOST created #20081106103603
(IMP) INFO: import of /BDL/BADHOST completed (0 rows) #20081106103603
(DB) INFO: /BDL/BADHOST~0 created #20081106103603
And so on until the end:
(DB) INFO: ZWF_INVH created #20081107211801
(IMP) INFO: import of ZWF_INVH completed (116640 rows) #20081107211817
(DB) INFO: ZWF_INVH~0 created #20081107211818
(DB) INFO: ZWF_INVI created #20081107211818
(IMP) INFO: import of ZWF_INVI completed (20557 rows) #20081107211820
(DB) INFO: ZWF_INVI~0 created #20081107211820
(DB) INFO: disconnected from DB
/sapmnt/S01/exe/R3load: job completed
/sapmnt/S01/exe/R3load: END OF LOG: 20081107211820
The log file is 52583 lines long.
There are 55 import log files and 28 export log files.
I hope some of this information is helpful for you and thank you again for your assistance!
Br Linus Hellsing

IDOC Syntax Error E0072 with status 26 after upgrade to ECC6.0

Hi
We have upgraded SAP R/3 from 4.6C to ECC6.0. After upgrade, when we create PO and output EDI, we are seeing this IDOC syntax error E0072 for Mandatory Segment E1EDK01. In 4.6C it was working fine with no issues, only after upgrade this problem started. It says E1EDK01 is missing which is mandatory. We are using basic type ORDERS01 with no extensions. When we see WE30 it looks fine, WE20 settings looks fine.
Order of the segments got scrambled in upgraded version. First segment is E1EDP19001, this is supposed to be under E1EDP01 segment. There are two E1EDP19001 segments created but there were no sub segments to E1EDP01.
Any help in this regard is highly appreciated.
Thanks
Pandiri

User Exit activation and fixing the issue in user exit fixed this issue.

Syntax error in program "CL_HTTP_SERVER=CP " after EHP4 Upgrade

Hi All,
Iam getting ABAP dumps after upgrading my system to EHP4 Windows ABAP+JAVA stack,
Syntax error in program "CL_HTTP_SERVER================CP ".
Error in the ABAP Application Program
The current ABAP program "SAPLHTTP_RUNTIME" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_HTTP_SERVER================CP " in include
"CL_HTTP_SERVER================CM00F " in
line 15:
"Field "C_IS_SHOW_SERVER_HEADER" is unknown. It is neither in one of th"
"e specified tables nor defined by a "DATA" statement. ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLHTTP_RUNTIME" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
    Please eliminate the error by performing a syntax check
    (or an extended program check) on the program "CL_HTTP_SERVER================CP
    You can also perform the syntax check from the ABAP Editor.
    If the problem persists, proceed as follows:
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    The following syntax error was found in the program
     CL_HTTP_SERVER================CP :
    "Field "C_IS_SHOW_SERVER_HEADER" is unknown. It is neither in one of th"
    "e specified tables nor defined by a "DATA" statement. ."
Regards
Uday

Hi,
SPDD should be performed before ACT_UPG phase when system prompts you for SPDD. But now you cannot do SPDD phase. All the objects that came during SPDD phase has been resetted to new objects which SAP has delivered with EHP4.
SPAU you can perform after upgrade and that too with in 14 days when upgrade finished without object key.
I should suggest you to read upgrade guide on http://service.sap.com/erp-ehp.
Thanks
Sunny

Short Dump-Syntax error program"CL_RSD_MULTIPROV==CP" after EHP1SP5 upgrade

Hi,
MultiProvider Activation/Display data is resulting into short dump with following text
Error in the ABAP Application Program
The current ABAP program "CL_RSD_MULTIPROV_CHECK========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSD_MULTIPROV==============CP " in include
"CL_RSD_MULTIPROV==============CM010 " in
line 1:
"Method "CHECK_LINITFL" is not declared or inherited in class "CL_RSD_M"
"ULTIPROV". -"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_RSD_MULTIPROV_CHECK========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
We have recently upgraded to EHP1SP5. We noticed this issue just after that.
Regards,
PD

Hi,
Please check the note 1461401.
1461401 - System error in the program CL_RSD_MULTIPROV_CHECK
This note should help you.
Regards,
Rafael

Syntax error: Invalid CSS after "" (iphone.sass) [Wikipedia]

Similar Messages

Maybe you are looking for